Chi tiết thông tin đặc tính sản phẩm
Bộ nguồn 1AC 12vDC 2.5A 30W - Phoenix Contact - Power supply unit - UNO-PS/1AC/12DC/ 30W - 2902998
Mô tả sản phẩm
- Nguồn cung cấp năng lượng UNO POWER với chức năng cơ bản
- Nhờ mật độ công suất cao, nguồn cung cấp điện UNO POWER nhỏ gọn là giải pháp lý tưởng cho tải trọng lên đến 240 W, đặc biệt là trong các hộp điều khiển nhỏ gọn. Các Bộ nguồn UNO POWER có sẵn trong các loại công suất khác nhau và chiều rộng tổng thể. Mức độ hiệu quả cao và tổn thất không tải thấp của chúng đảm bảo hiệu quả năng lượng cao.
Đặc điểm nổi bật
- Lắp đặt linh hoạt bằng cách chỉ cần chụp vào đường ray DIN
- Thêm không gian trong tủ điều khiển với mật độ công suất cao hơn tới 20%
- Hiệu suất năng lượng tối đa, nhờ hiệu suất trên 90% và tổn thất không tải rất thấp dưới 0,3 W
- Lắp đặt ngoài trời, nhờ vào dải nhiệt độ hoạt động rộng từ -25 ° C đến + 70 ° C
Dimensions
Width |
22.5 mm |
Height |
90 mm |
Depth |
84 mm |
Ambient conditions
Degree of protection |
IP20 |
Ambient temperature (operation) |
-25 °C ... 70 °C (> 55 °C Derating: 2.5 %/K) |
Ambient temperature (storage/transport) |
-40 °C ... 85 °C |
Max. permissible relative humidity (operation) |
≤ 95 % (at 25 °C, non-condensing) |
Climatic class |
3K3 (in acc. with EN 60721) |
Degree of pollution |
2 |
Input data
Nominal input voltage range |
100 V AC ... 240 V AC |
Input voltage range |
85 V AC ... 264 V AC |
Current consumption |
0.8 A (100 V AC) |
|
0.4 A (240 V AC) |
Nominal power consumption |
71.7 VA |
Inrush surge current |
< 25 A (typical) |
Mains buffering |
> 20 ms (120 V AC) |
|
> 110 ms (230 V AC) |
Input fuse |
2 A (slow-blow, internal) |
Choice of suitable circuit breakers |
6 A ... 16 A (Characteristics B, C, D, K) |
Type of protection |
Transient surge protection |
Protective circuit/component |
Varistor |
Output data
Nominal output voltage |
12 V DC ±1 % |
Nominal output current (IN) |
2.5 A (-25 °C ... 55 °C) |
Derating |
55 °C ... 70 °C (2.5%/K) |
Connection in parallel |
Yes, for redundancy and increased capacity |
Connection in series |
yes |
Feedback resistance |
< 25 V DC |
Protection against surge voltage on the output |
≤ 25 V DC |
Control deviation |
< 1 % (change in load, static 10 % ... 90 %) |
|
< 3 % (Dynamic load change 10 % ... 90 %, 10 Hz) |
|
< 0.1 % (change in input voltage ±10 %) |
Residual ripple |
< 30 mVPP (with nominal values) |
Output power |
30 W |
Typical response time |
< 1 s |
Maximum power dissipation in no-load condition |
< 0.3 W |
Power loss nominal load max. |
< 4.6 W |
General
Net weight |
0.15 kg |
Efficiency |
typ. 86 % (120 V AC) |
|
typ. 87 % (230 V AC) |
Insulation voltage input/output |
4 kV AC (type test) |
|
3 kV AC (routine test) |
Protection class |
II (in closed control cabinet) |
Degree of protection |
IP20 |
MTBF (IEC 61709, SN 29500) |
> 953000 h (40 °C) |
Mounting position |
horizontal DIN rail NS 35, EN 60715 |
Assembly instructions |
alignable: 0 mm horizontally, 30 mm vertically |
Connection data, input
Connection method |
Screw connection |
Conductor cross section solid min. |
0.2 mm² |
Conductor cross section solid max. |
2.5 mm² |
Conductor cross section flexible min. |
0.2 mm² |
Conductor cross section flexible max. |
2.5 mm² |
Conductor cross section AWG min. |
24 |
Conductor cross section AWG max. |
14 |
Stripping length |
8 mm |
Screw thread |
M3 |
Connection data, output
Connection method |
Screw connection |
Conductor cross section solid min. |
0.2 mm² |
Conductor cross section solid max. |
2.5 mm² |
Conductor cross section flexible min. |
0.2 mm² |
Conductor cross section flexible max. |
2.5 mm² |
Conductor cross section AWG min. |
24 |
Conductor cross section AWG max. |
14 |
Stripping length |
8 mm |
Screw thread |
M3 |
Standards and Regulations
Electromagnetic compatibility |
Conformance with EMC Directive 2014/30/EU |
Noise immunity |
EN 61000-6-2:2005 |
Connection in acc. with standard |
CUL |
Standards/regulations |
EN 61000-4-2 |
Contact discharge |
4 kV (Test Level 2) |
Standards/regulations |
EN 61000-4-3 |
Frequency range |
80 MHz ... 1 GHz |
Test field strength |
10 V/m |
Frequency range |
1.4 GHz ... 2 GHz |
Test field strength |
3 V/m |
Standards/regulations |
EN 61000-4-4 |
Comments |
Criterion B |
Standards/regulations |
EN 61000-4-5 |
|
EN 61000-6-3 |
|
EN 61000-4-6 |
Frequency range |
10 kHz ... 80 MHz |
Voltage |
10 V (Test Level 3) |
Standards/regulations |
EN 61000-4-11 |
Low Voltage Directive |
Conformance with LV directive 2006/95/EC |
Standard - Safety of transformers |
EN 61558-2-16 |
Standard - Electrical safety |
IEC 60950-1/VDE 0805 (SELV) |
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations |
EN 50178/VDE 0160 (PELV) |
Standard – Safety extra-low voltage |
IEC 60950-1 (SELV) and EN 60204-1 (PELV) |
Standard - Safe isolation |
DIN VDE 0100-410 |
Standard – Limitation of mains harmonic currents |
EN 61000-3-2 |
UL approvals |
UL/C-UL listed UL 508 |
|
UL/C-UL Recognized UL 60950-1 |
|
UL/C-UL Listed ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D T4 (Hazardous Location) |
Shock |
18 ms, 30g, in each space direction (according to IEC 60068-2-27) |
Vibration (operation) |
< 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6) |
|
15 Hz ... 150 Hz, 2.3g, 90 min. |
Approval - requirement of the semiconductor industry with regard to mains voltage dips |
EN 61000-4-11 |
Information technology equipment - safety (CB scheme) |
CB Scheme |
Environmental Product Compliance
REACh SVHC |
|
China RoHS |
Environmentally Friendly Use Period = 25; |
|
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
Classifications
eCl@ss
eCl@ss 4.0 |
27040702 |
eCl@ss 4.1 |
27040702 |
eCl@ss 5.0 |
27049002 |
eCl@ss 5.1 |
27049002 |
eCl@ss 6.0 |
27049002 |
eCl@ss 7.0 |
27049002 |
eCl@ss 8.0 |
27049002 |
eCl@ss 9.0 |
27040701 |
ETIM
ETIM 3.0 |
EC001039 |
ETIM 4.0 |
EC000599 |
ETIM 5.0 |
EC002540 |
ETIM 6.0 |
EC002540 |
UNSPSC
UNSPSC 6.01 |
30211502 |
UNSPSC 7.0901 |
39121004 |
UNSPSC 11 |
39121004 |
UNSPSC 12.01 |
39121004 |
UNSPSC 13.2 |
39121004 |
- Tài liệu kỹ thuật Phoenix Contact UNO-PS/1AC/12DC/ 30W - 2902998
ở đây.