Bộ nguồn 24vDC 4A 1AC 100/240V - Siemens - Power supply unit - LOGO!POWER 24 V / 4 A - 6EP3333-6SB00-0AY0

Input

Input

1-phase AC or DC

Rated voltage value Vin rated

100 ... 240 V

Voltage range AC

85 ... 264 V

Input voltage

• ● at DC

110 ... 300 V

Wide-range input

Yes

Mains buffering at Iout rated, min.

40 ms; at Vin = 187 V

Rated line frequency 1

50 Hz

Rated line frequency 2

60 Hz

Rated line range

47 ... 63 Hz

Input current

• ● at rated input voltage 120 V

1.95 A

• ● at rated input voltage 230 V

0.97 A

Switch-on current limiting (+25 °C), max.

31 A

I²t, max.

2.5 A²·s

Built-in incoming fuse

internal

Protection in the mains power input (IEC 898)

Recommended miniature circuit breaker: from 10 A characteristic B or from 6 A characteristic C

Output

Output

Controlled, isolated DC voltage

Rated voltage Vout DC

24 V

Total tolerance, static ±

3 %

Static mains compensation, approx.

0.1 %

Static load balancing, approx.

0.1 %

Residual ripple peak-peak, max.

200 mV

Residual ripple peak-peak, typ.

30 mV

Spikes peak-peak, max. (bandwidth: 20 MHz)

300 mV

Spikes peak-peak, typ. (bandwidth: 20 MHz)

50 mV

Adjustment range

22.2 ... 26.4 V

Product function Output voltage adjustable

Yes

Output voltage setting

via potentiometer

Status display

Green LED for output voltage OK

On/off behavior

No overshoot of Vout (soft start)

Startup delay, max.

0.5 s

Voltage rise, typ.

100 ms

Rated current value Iout rated

4 A

Current range

0 ... 4 A

• ● Note

+55 ... +70 °C: Derating 2%/K

Supplied active power typical

96 W

Parallel switching for enhanced performance

Yes

Numbers of parallel switchable units for enhanced performance

2

Efficiency

Efficiency at Vout rated, Iout rated, approx.

89 %

Power loss at Vout rated, Iout rated, approx.

12 W

Power loss [W] during no-load operation maximum

0.3 W

Closed-loop control

Dynamic mains compensation (Vin rated ±15 %), max.

0.2 %

Dynamic load smoothing (Iout: 10/90/10 %), Uout ± typ.

2 %

Load step setting time 10 to 90%, typ.

1 ms

Load step setting time 90 to 10%, typ.

1 ms

Protection and monitoring

Output overvoltage protection

Yes, according to EN 60950-1

Current limitation, typ.

5 A

Property of the output Short-circuit proof

Yes

Short-circuit protection

Constant current characteristic

Enduring short circuit current RMS value

• ● maximum

5 A

Overload/short-circuit indicator

-

Safety

Primary/secondary isolation

Yes

Galvanic isolation

Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178

Protection class

Class II (without protective conductor)

CE mark

Yes

UL/cUL (CSA) approval

cULus-listed (UL 508, CSA C22.2 No. 107.1), File E197259; cURus-recognized (UL 60950, CSA C22.2 No. 60950), File E151273

Explosion protection

ATEX (EX) II 3G Ex nA IIC T3; cCSAus (CSA C22.2 No. 213-M1987, ANSI/ISA-12.12.01-2007) Class I, Div. 2, Group ABCD, T4

FM approval

Class I, Div. 2, Group ABCD, T4

CB approval

Yes

Marine approval

available soon

Degree of protection (EN 60529)

IP20

EMC

Emitted interference

EN 55022 Class B

Supply harmonics limitation

EN 61000-3-2

Noise immunity

EN 61000-6-2

Operating data

Ambient temperature

• ● during operation

-25 ... +70 °C

• — Note

with natural convection

• ● during transport

-40 ... +85 °C

• ● during storage

-40 ... +85 °C

Humidity class according to EN 60721

Climate class 3K3, no condensation

Mechanics

Connection technology

screw-type terminals

Connections

• ● Supply input

L, N: 1 screw terminal each for 0.5 ... 2.5 mm2 single-core/finely stranded

• ● Output

+, -: 2 screw terminals each for 0.5 ... 2.5 mm²

• ● Auxiliary

-

Width of the enclosure

72 mm

Height of the enclosure

90 mm

Depth of the enclosure

53 mm

Required spacing

• ● top

20 mm

• ● bottom

20 mm

• ● left

0 mm

• ● right

0 mm

Weight, approx.

0.29 kg

Product feature of the enclosure housing for side-by-side mounting

Yes

Installation

Snaps onto DIN rail EN 60715 35x15, various direct mounting positions

MTBF at 40 °C

2 391 480 h

Other information

Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

SITOP PSE202U redundancy module

6EP1962-2BA00

Input/output: 24 V DC/NEC Class 2 
suitable for decoupling two SITOP power supplies output power limited < 100 VA

SITOP PSE202U redundancy module

6EP1964-2BA00

Input/output: 24 V DC/10 A 
suitable for decoupling two SITOP power supplies 
with a maximum of 5 A output current

SITOP PSE200U 3 A selectivity module

4-channel selectivity module 
Input: 24 V DC 
Output: 24 V DC/3 A per channel 
Adjustable response threshold 0.5 … 3 A

• With common alarm signal

6EP1961-2BA11

• With single-channel signaling

6EP1961-2BA31

SITOP PSE200U 3 A NEC Class 2 selectivity module

4-channel selectivity module
Input: 24 V DC
Output: 24 V DC/3 A per channel
Adjustable response threshold 0.5 … 3 A

• With common alarm signal

6EP1961-2BA51

• With single-channel signaling

6EP1961-2BA61