Bộ nguồn 24vDC 4A 1AC 120/230V (DC 110/300V) - Siemens - SITOP PSU100C 24 V/4 A - 6EP1332-5BA10

Input

Input

1-phase AC or DC

Rated voltage value Vin rated

100 ... 230 V

Voltage range AC

85 ... 264 V

Input voltage

• ● at DC

110 ... 300 V

Wide-range input

Yes

Overvoltage resistance

2.3 × Vin rated, 1.3 ms

Mains buffering at Iout rated, min.

20 ms; at Vin = 230 V

Rated line frequency 1

50 Hz

Rated line frequency 2

60 Hz

Rated line range

47 ... 63 Hz

Input current

• ● at rated input voltage 100 V

2.25 A

• ● at rated input voltage 230 V

1.15 A

Switch-on current limiting (+25 °C), max.

34 A

I²t, max.

3 A²·s

Built-in incoming fuse

internal

Protection in the mains power input (IEC 898)

Recommended miniature circuit breaker: from 10 A characteristic B or from 6 A characteristic C

Output

Output

Controlled, isolated DC voltage

Rated voltage Vout DC

24 V

Total tolerance, static ±

3 %

Static mains compensation, approx.

0.1 %

Static load balancing, approx.

0.2 %

Residual ripple peak-peak, max.

200 mV

Residual ripple peak-peak, typ.

80 mV

Spikes peak-peak, max. (bandwidth: 20 MHz)

300 mV

Spikes peak-peak, typ. (bandwidth: 20 MHz)

80 mV

Adjustment range

22.2 ... 26.4 V

Product function Output voltage adjustable

Yes

Output voltage setting

via potentiometer

Status display

Green LED for output voltage OK

On/off behavior

Overshoot of Vout approx. 1 %

Startup delay, max.

1.5 s

Voltage rise, typ.

400 ms

Rated current value Iout rated

4 A

Current range

0 ... 4 A

• ● Note

+55 ... +70 °C: Derating 3%/K; at +70 °C Iout rated 2.2 A

Supplied active power typical

96 W

Short-term overload current

• ● at short-circuit during operation typical

Parallel switching for enhanced performance

Yes; Start-up with single nominal load only

Numbers of parallel switchable units for enhanced performance

2

Efficiency

Efficiency at Vout rated, Iout rated, approx.

88 %

Power loss at Vout rated, Iout rated, approx.

13 W

Power loss [W] during no-load operation maximum

0.75 W

Closed-loop control

Dynamic mains compensation (Vin rated ±15 %), max.

0.1 %

Dynamic load smoothing (Iout: 10/90/10 %), Uout ± typ.

3 %

Load step setting time 10 to 90%, typ.

4 ms

Load step setting time 90 to 10%, typ.

4 ms

Protection and monitoring

Output overvoltage protection

Yes, according to EN 60950-1

Current limitation, typ.

4.8 A

Property of the output Short-circuit proof

Yes

Short-circuit protection

Electronic shutdown, automatic restart

Overload/short-circuit indicator

-

Safety

Primary/secondary isolation

Yes

Galvanic isolation

Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178

Protection class

Class I

Leakage current

• ● maximum

3.5 mA

• ● typical

0.4 mA

CE mark

Yes

UL/cUL (CSA) approval

cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cCSAus (CSA C22.2 No. 60950-1, UL 60950-1)

Explosion protection

ATEX (EX) II 3G Ex nA IIC T4; cCSAus (CSA C22.2 No. 213-M1987, ANSI/ISA-12.12.01-2007) Class I, Div. 2, Group ABCD, T4

FM approval

-

CB approval

Yes

Marine approval

GL, ABS

Degree of protection (EN 60529)

IP20

EMC

Emitted interference

EN 55022 Class B

Supply harmonics limitation

EN 61000-3-2

Noise immunity

EN 61000-6-2

Operating data

Ambient temperature

• ● during operation

-20 ... +70 °C

• — Note

with natural convection

• ● during transport

-40 ... +85 °C

• ● during storage

-40 ... +85 °C

Humidity class according to EN 60721

Climate class 3K3, no condensation

Mechanics

Connection technology

screw-type terminals

Connections

• ● Supply input

L, N, PE: Removable screw terminal, each for 1 x 0.5 ... 2.5 mm²

• ● Output

+: 1 screw terminal for 0.5 ... 2.5 mm²; -: 2 screw terminals for 0.5 ... 2.5 mm²

• ● Auxiliary

-

Width of the enclosure

52.5 mm

Height of the enclosure

80 mm

Depth of the enclosure

100 mm

Required spacing

• ● top

50 mm

• ● bottom

50 mm

• ● left

25 mm

• ● right

25 mm

Weight, approx.

0.32 kg

Product feature of the enclosure housing for side-by-side mounting

Yes

Installation

Snaps onto DIN rail EN 60715 35x7.5/15

Electrical accessories

Removable spring-type terminal 6EP1971-5BA00

MTBF at 40 °C

2 726 727 h

Other information

Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

SITOP PSE202U redundancy module

6EP1962-2BA00

Input/output: 24 V DC/NEC Class 2 
suitable for decoupling two SITOP power supplies output power limited < 100 VA

SITOP PSE202U redundancy module

6EP1964-2BA00

Input/output: 24 V DC/10 A 
suitable for decoupling two SITOP power supplies 
with a maximum of 5 A output current

SITOP PSE200U 3 A selectivity module

4-channel selectivity module 
Input: 24 V DC 
Output: 24 V DC/3 A per channel 
Adjustable response threshold 0.5 … 3 A

• With common alarm signal

6EP1961-2BA11

• With single-channel signaling

6EP1961-2BA31

SITOP PSE200U 3 A NEC Class 2 selectivity module

4-channel selectivity module 
Input: 24 V DC 
Output: 24 V DC/3 A per channel 
Adjustable response threshold 0.5 … 3 A

• With common alarm signal

6EP1961-2BA51

• With single-channel signaling

6EP1961-2BA61

SITOP Power PSU100C accessories

6EP1971-5BA00

Removable spring-loaded terminal, 100 units, for SITOP PSU100C