Reliable detection with extremely thin design
- Variable monitoring lengths from 120 mm to 1,400 mm (in 160 mm increments)
- Operating range 7 m
- Response time 18 ms
- Resolution 45 mm to 25 mm
- Order-picking with bright job LEDS on the sender and receiver sides
- IP 65 protection class
- Ambient light immunity up to 150,000 lux

Switching automation light grids
SLG

Reliable detection with extremely thin design
 

Ưu điểm

- Small, slim, and sleek design enables easy integration into applications
- Capacitive teach-in button and LEDs make commissioning easier for complex solutions
- Slim and flat models offer flexible mounting options
- User-defined factory preset configuration or flexible configuration with teach-in button
- Optical synchronization eliminates the need to lay cables, thus saving time
- At only 8 mm x 25 mm, smart light grids fit nearly anywhere and can be embedded inside walls, doors, conveyors, and machines
- The teach-in button and auto-muting enable Plug & Play. The alignment aid and the “Click & Go” principle also enable faster installation.


Type: SAS4-F044N3CS1TS42
Part number: 1109979
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: Teach button with configuration software
Cross beam/parallel beam: Parallel beam active
Detection height: 440 mm
Switching output: NPN
Response time: 19 ms
Connection type: Cable open end, 4-wire


Type: SGS4-F124P3PS2T00
Part number: 1048038
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 1,240 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SPL-F280PPS1W04
Part number: 1046764
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 280 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SPL-F120PPS2W04
Part number: 1047344
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 120 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SPL-F440PPS1W04
Part number: 1046314
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 440 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SPL-S280PPS1W04
Part number: 1046763
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 280 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S028N3PS1T00
Part number: 1207707
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 280 mm
Switching output: NPN
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SPL-F280PPS2W04
Part number: 1046996
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 280 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S012P3PS1T00
Part number: 1047364
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 120 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-F060P3PS1T00
Part number: 1048058
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 600 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SPL-F120PPS1W04
Part number: 1046128
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 120 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SPL-S120PPS1W04
Part number: 1046127
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 120 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-F044N3PS1T00
Part number: 1207761
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 440 mm
Switching output: NPN
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S060P3PS1T00
Part number: 1047587
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 600 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S028P3PS1T00
Part number: 1047063
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 280 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S060N3PS1T00
Part number: 1207709
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 600 mm
Switching output: NPN
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-F044P3PS1T00
Part number: 1045020
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 440 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S044N3PS1T00
Part number: 1207708
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 440 mm
Switching output: NPN
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S044P3PS1T00
Part number: 1045019
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 440 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S028P3PS2T00
Part number: 1210592
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 280 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S140P7PS2T03
Part number: 1210782
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 1,400 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S108P3PS2T03
Usual availability:
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F140P7PS1W02
Part number: 1211095
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,400 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S108P7PS2T03
Part number: 1210883
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S060P3PS2T00
Part number: 1213187
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 600 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-F012P3PS1T09
Part number: 1213348
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 120 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S140P7TS1W02
Part number: 1213242
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,400 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SAS4-F060P3TS1T0D
Part number: 1213487
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 600 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SGS4-S140P7TC1W02
Part number: 1213243
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,400 mm
Switching output: PNP
Response time: 38 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SPL-S280PTS1W04
Part number: 1213544
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 280 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SPL-S280PTC1W04
Part number: 1213545
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 280 mm
Switching output: PNP
Response time: 38 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SAS4-F060P3TS1T01
Part number: 1213486
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 600 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SAS4-S012P3PS2T09
Part number: 1213424
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 120 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F092P7PS1W02
Part number: 1213765
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 920 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F092N3PS2T00
Part number: 1212947
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 920 mm
Switching output: NPN
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F108P3TS2T01
Part number: 1212533
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SAS4-S028P3PS1W00
Part number: 1212471
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 280 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S028P3TS1W01
Part number: 1212766
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 280 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SAS4-S044N7PS1T00
Part number: 1212438
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 440 mm
Switching output: NPN
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S044P7PS2W0A
Part number: 1215506
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 440 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S028P3TS2W0F
Part number: 1216005
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 280 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SAS4-S028P3PS2T02
Part number: 1215926
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 280 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S012P7PS2W0A
Part number: 1215510
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 120 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S044P7PC2W0A
Part number: 1215507
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 440 mm
Switching output: PNP
Response time: 38 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-F012P3PS1W02
Part number: 1215171
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 120 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-F028N3PC1W03
Part number: 1215345
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 280 mm
Switching output: NPN
Response time: 114 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S044P7PS1W0A
Part number: 1215545
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 440 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S044P7PC1W0A
Part number: 1215546
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 440 mm
Switching output: PNP
Response time: 38 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-F028N3PS1W03
Part number: 1215346
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 280 mm
Switching output: NPN
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SPL-F280PPS1W05
Part number: 1215336
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 280 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F092F7PC1W11
Part number: 1215260
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 920 mm
Switching output: PNP
Response time: 114 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-F028N3PC1T03
Part number: 1215354
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 280 mm
Switching output: NPN
Response time: 114 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SPL-S280PPC1W04
Part number: 1215571
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 280 mm
Switching output: PNP
Response time: 38 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S012P7PS1W0A
Part number: 1215547
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 120 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-F028N3PS1T03
Part number: 1215355
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 280 mm
Switching output: NPN
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S060P3PS2W0F
Part number: 1215269
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 600 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S076P3PS2W0F
Part number: 1215270
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 760 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F092F7PS1W11
Part number: 1215261
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 920 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S060P7PS2T00
Part number: 1215363
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 600 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S140P3TS2T03
Part number: 1215613
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 1,400 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SGS4-S060P3TS2W0F
Part number: 1215352
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 600 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SGS4-S076P3TS2W0F
Part number: 1215353
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 760 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SGS4-S092F7PS1W11
Part number: 1215258
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 920 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S092F7PC1W11
Part number: 1215259
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 920 mm
Switching output: PNP
Response time: 114 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S076P7PC1T0A
Part number: 1215360
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 760 mm
Switching output: PNP
Response time: 38 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S108P7PS1W0A
Part number: 1215508
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S108P7PC1W0A
Part number: 1215509
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 38 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S076P7PS1T0A
Part number: 1215361
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 760 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S092P3PS1T01
Part number: 1215420
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 920 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S012P3PS2T05
Part number: 1211982
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 120 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S044P3TS2T00
Part number: 1212689
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 440 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SPL-F440PPC2W04
Part number: 1211692
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 440 mm
Switching output: PNP
Response time: 38 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SPL-F280PTC2W04
Part number: 1212649
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 280 mm
Switching output: PNP
Response time: 38 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SPL-F120PPC2W04
Part number: 1211690
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 120 mm
Switching output: PNP
Response time: 38 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SPL-F280PPC2W04
Part number: 1211691
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 280 mm
Switching output: PNP
Response time: 38 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SPL-F280PTS2W04
Part number: 1212648
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 280 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SAS4-S044P3PS2T00
Part number: 1211573
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 440 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-F028P3PS1W00
Part number: 1211906
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 280 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-F028P3PS2W00
Part number: 1212083
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 280 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-F028P3TS2T00
Part number: 1212332
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 280 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SAS4-F028P3TS1W01
Part number: 1212737
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 280 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SGS4-F076F7PS2TA0
Part number: 1212270
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 760 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F108P7PS2W00
Part number: 1212430
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-F044P3TS2T00
Part number: 1212690
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 440 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SPL-F120PTS2W04
Part number: 1212775
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 120 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M12 male connector, 4-pin



Type: SGS4-S108P7PC1W07
Part number: 1212343
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 114 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S108P7PS1T07
Part number: 1212304
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F076E7PS2TA0
Part number: 1212226
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 760 mm
Switching output: NPN
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S076P7TS1W02
Part number: 1212927
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 760 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SGS4-S092P7TS1W02
Part number: 1212928
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 920 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SGS4-S124P7PC1W07
Part number: 1212462
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 1,240 mm
Switching output: PNP
Response time: 114 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S124P7PS1W07
Part number: 1212463
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 1,240 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SPL-S280PTS2W04
Part number: 1212658
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 280 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SGS4-S108P7PS1W07
Part number: 1212344
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SPL-S280PPS2W05
Part number: 1212183
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 280 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S108P3PS2W03
Part number: 1211901
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S140P7PS2W02
Part number: 1211963
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,400 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S140P7PS2W00
Part number: 1211751
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,400 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S092P3PS2T07
Part number: 1211757
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 920 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S124P3PS2T07
Part number: 1212490
Usual availability:
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 1,240 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S124P3PC2T07
Part number: 1212489
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 1,240 mm
Switching output: PNP
Response time: 114 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S092P3TS2T02
Part number: 1212061
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 920 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SPL-S280PTC2W04
Part number: 1212659
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 280 mm
Switching output: PNP
Response time: 38 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SGS4-S076P3PS1W01
Part number: 1211895
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 760 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S108P7PC1T07
Part number: 1212305
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 114 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S108P3PS1T07
Part number: 1211642
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S076P7PS1T00
Part number: 1211689
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 760 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S060P3TS1W01
Part number: 1218109
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 600 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SGS4-S108F3PC1T00
Part number: 1217939
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 38 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S108P3PC1W01
Part number: 1217451
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 114 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S108P3PS2W06
Part number: 1217486
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S076P3TS1W01
Part number: 1217734
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 760 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SAS4-F028N3PC1T00
Part number: 1217241
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 280 mm
Switching output: NPN
Response time: 38 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F108P3PS2T03
Part number: 1217445
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F092P3PS2T00
Part number: 1217733
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 920 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S060F3PS1W14
Part number: 1217672
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 600 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S076N3PS1W05
Part number: 1217542
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 760 mm
Switching output: NPN
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S044P7PS1T00
Part number: 1217729
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 440 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F108N3PS1W04
Part number: 1217540
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,080 mm
Switching output: NPN
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-F060N3PS1W07
Part number: 1217811
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 600 mm
Switching output: NPN
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F060P7PS2T00
Part number: 1217200
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 600 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F092N3PS1W04
Part number: 1217539
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 920 mm
Switching output: NPN
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-F060P3TS2W04
Part number: 1218051
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 600 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SGS4-F092P7PS1WS22
Part number: 1068077
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: Without teach button with configuration software
Cross beam/parallel beam: Parallel beam active
Detection height: 920 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S218P7P02WS20
Part number: 1066625
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: Teach button with configuration software
Cross beam/parallel beam: Cross beam inactive
Detection height: 2,180 mm
Switching output: PNP
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S250P7P02WS21
Part number: 1066626
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: Teach button with configuration software
Cross beam/parallel beam: Cross beam inactive
Detection height: 2,500 mm
Switching output: PNP
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S108P7TS1W02
Part number: 1106095
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SGS4-S060F3TS1T00
Part number: 1219785
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 600 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SGS4-F124F7PS2T00
Part number: 1220168
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 1,240 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S076F3PS1W14
Part number: 1217673
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 760 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F092N3PS1T03
Part number: 1220768
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 920 mm
Switching output: NPN
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin

Type: SPL-F440NPS1W04
Part number: 1220891
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 440 mm
Switching output: NPN
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-F044N3PS1T03
Part number: 1220767
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 440 mm
Switching output: NPN
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S060F3TS1T12
Part number: 1219920
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 600 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SAS4-S044P3PS1W07
Part number: 1220419
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 440 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S044P3TS2W0F
Part number: 1220838
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 440 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SGS4-S140P3PS2T00
Part number: 1208109
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 1,400 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S092P3PS2T00
Part number: 1208108
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 920 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F108P3PS2T01
Part number: 1207780
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S108P3PS2T07
Part number: 1207519
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S124P3PS2W04
Part number: 1047903
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,240 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S124P3PS2W00
Part number: 1047815
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,240 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F108P7PS1T00
Part number: 1047501
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F108P7PS1W02
Part number: 1047500
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F092P7PS1W00
Part number: 1047211
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 920 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F092P7PS1T00
Part number: 1208151
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 920 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S140P7PS2T00
Part number: 1208241
Usual availability:
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 1,400 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S092P3PS1T00
Part number: 1208201
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 920 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S092P7PS1T00
Part number: 1208200
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 920 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S108N3PS1T00
Part number: 1208155
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 1,080 mm
Switching output: NPN
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F108P3PS1W00
Part number: 1045008
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S108P3PS1W00
Part number: 1045007
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SPL-F120PPC1W04
Part number: 1208391
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 120 mm
Switching output: PNP
Response time: 38 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SPL-S440NPS1W04
Part number: 1047365
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 440 mm
Switching output: NPN
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S108P7PS1W00
Part number: 1045009
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S076P3PS1T00
Part number: 1047092
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 760 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S140F7PS1T00
Part number: 1047077
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 1,400 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S108P3PS1W82
Part number: 1045017
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S140P3PS1T00
Part number: 1047015
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 1,400 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F140P7PS1W00
Part number: 1045014
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,400 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S140P7PS1W00
Part number: 1045013
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,400 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F140P3PS1W00
Part number: 1045012
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,400 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S140P3PS1W00
Part number: 1045011
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,400 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S060N3PS1W00
Part number: 1207706
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 600 mm
Switching output: NPN
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S044N3PS1W00
Part number: 1207705
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 440 mm
Switching output: NPN
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F108P7PS1W00
Part number: 1045010
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S028N3PS1W00
Part number: 1207704
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 280 mm
Switching output: NPN
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S076P3PS1W00
Part number: 1046966
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 760 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S060P3PS1W00
Part number: 1047525
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 600 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SPL-S440PPS1W04
Part number: 1046312
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 440 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-F012P3PS1T00
Part number: 1207475
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 120 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SPL-S440PPS2W04
Part number: 1045018
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 440 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-F028P3PS1T00
Part number: 1208171
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 280 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-F028P3PS2T00
Part number: 1207711
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 280 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S060N3PS1W02
Part number: 1207752
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 600 mm
Switching output: NPN
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S012N3PS1T00
Part number: 1047009
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 120 mm
Switching output: NPN
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S012N3PS1W00
Part number: 1047014
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 120 mm
Switching output: NPN
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F140P7PS2T01
Part number: 1210585
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 1,400 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S044P3TS2W01
Part number: 1218216
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 440 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SGS4-F140N7PS1W02
Part number: 1218778
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,400 mm
Switching output: NPN
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F140N3PS1W02
Part number: 1218777
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,400 mm
Switching output: NPN
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F140P3PS1W03
Part number: 1218519
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 1,400 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F124N3PS1W06
Part number: 1218543
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,240 mm
Switching output: NPN
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-F044N3PS1W06
Part number: 1218544
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 440 mm
Switching output: NPN
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S076P3TS1W03
Part number: 1218243
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 760 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SGS4-F060P7PS2W00
Part number: 1218379
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 600 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SPL-F280PTC1W04
Part number: 1210776
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 280 mm
Switching output: PNP
Response time: 38 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SAS4-S060P3PC1T01
Part number: 1210509
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 600 mm
Switching output: PNP
Response time: 114 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S060P3PS1T0D
Part number: 1210098
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 600 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S060P3PS1T01
Part number: 1210508
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 600 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S012P3PS2T00
Part number: 1210494
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 120 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S060P3PS1W0D
Part number: 1210099
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 600 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S060P3PS2T0A
Part number: 1209782
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 600 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F060P3PS2T03
Part number: 1209955
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 600 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F092P7PS2T00
Part number: 1209734
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 920 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S060N3PS1T00
Part number: 1210029
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 600 mm
Switching output: NPN
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F092N3PS1T00
Part number: 1210021
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 920 mm
Switching output: NPN
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S076N3PS1T00
Part number: 1210030
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 760 mm
Switching output: NPN
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S060N7PS2W01
Part number: 1209875
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 600 mm
Switching output: NPN
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S060P7PS1T00
Part number: 1210569
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 600 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S076N7PS1T00
Part number: 1209741
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 760 mm
Switching output: NPN
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S076P3PS2W00
Part number: 1209927
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 760 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S092P3PS2W04
Part number: 1209924
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 920 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F108P3PS2W04
Part number: 1216770
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F060P7TS2W00
Part number: 1216873
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 600 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SGS4-F124P3PS2W00
Part number: 1216884
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,240 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F124P7PS2T00
Part number: 1216552
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 1,240 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F124P3PS2W0C
Part number: 1216885
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,240 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F092P3PS2W0E
Part number: 1216882
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 920 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F108P3PS2W0C
Part number: 1216883
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F124P7PS2T01
Part number: 1216886
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 1,240 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F140P3PS2W0C
Part number: 1216887
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,400 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S108P7PC2T09
Part number: 1216724
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 114 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S108P7PS2T09
Part number: 1216723
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S076P7PS2T03
Part number: 1216477
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 760 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S124P3PS2W0C
Part number: 1216900
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,240 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S140P3PS2W00
Part number: 1216901
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,400 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S060P3PS2W00
Part number: 1216890
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 600 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S076P3PS2W0C
Part number: 1216891
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 760 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S092P7TC2T00
Part number: 1217024
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 920 mm
Switching output: PNP
Response time: 38 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SGS4-S108P3PS2W04
Part number: 1216918
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S108F7PC1WA4
Part number: 1216894
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 38 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S092P7TS2T00
Part number: 1217023
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 920 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SGS4-S108F7PS1T00
Part number: 1216895
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S108P7PC1W00
Part number: 1216898
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 38 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S124P3PS1T00
Part number: 1216899
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 1,240 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S108F7PS1WA4
Part number: 1216896
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S108F7TS1T00
Part number: 1216897
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SGS4-S092P7PS2T03
Part number: 1216476
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 920 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F092P7PC1W02
Part number: 1216546
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 920 mm
Switching output: PNP
Response time: 38 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S076P3PS2T00
Part number: 1216327
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 760 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F092P3PS1W00
Part number: 1216881
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 920 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S108F7PC1WA0
Part number: 1216893
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 38 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S076P3PC1W0A
Part number: 1216199
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 760 mm
Switching output: PNP
Response time: 38 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S060P3PS1W00
Part number: 1216889
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 600 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S092P3PS1W05
Part number: 1216892
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 920 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S076P3PS1W0A
Part number: 1216200
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 760 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S060F3PS1T00
Part number: 1216888
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 600 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-F060N3PS1T03
Part number: 1216575
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 600 mm
Switching output: NPN
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S044P3PS1W05
Part number: 1216994
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 440 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S060N3PC1T00
Part number: 1221215
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 600 mm
Switching output: NPN
Response time: 38 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S012P3PS1W05
Part number: 1221134
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 120 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F060P7PC1W00
Part number: 1221047
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 600 mm
Switching output: PNP
Response time: 38 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S108P3TS2T00
Part number: 1221852
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SGS4-F092P7PC2T00
Part number: 1221935
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 920 mm
Switching output: PNP
Response time: 38 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F108P7PS2T00
Part number: 1221936
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F108P3PS2W02
Part number: 1221834
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S124P7PS2T03
Part number: 1221914
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 1,240 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S108P3PS1W01
Part number: 1211249
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F076E3PS2W03
Part number: 1211230
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 760 mm
Switching output: NPN
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S076P7TC1W02
Part number: 1211306
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 760 mm
Switching output: PNP
Response time: 38 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SGS4-S092P7TC1W02
Part number: 1211305
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 920 mm
Switching output: PNP
Response time: 38 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SGS4-S140P3PS1T0D
Part number: 1211269
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 1,400 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F092P3PS1T0D
Part number: 1211195
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 920 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S140F7PS1TA0
Part number: 1211383
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 1,400 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SPL-S120PPS2W04
Part number: 1211239
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 120 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SPL-S280PTS2W05
Part number: 1211386
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 280 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SGS4-S124P3PS2W05
Part number: 1211392
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 1,240 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SPL-S120PPC1W04
Part number: 1211282
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 120 mm
Switching output: PNP
Response time: 38 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SPL-F280PTS2W05
Part number: 1211251
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 280 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SPL-F440PPS2W04
Part number: 1211300
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 440 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S108P3PS2W01
Part number: 1211250
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S076P3PS1T0D
Part number: 1211268
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 760 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S124P3PS2W01
Part number: 1211391
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 1,240 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S044P3PS2W00
Part number: 1211104
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 440 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S044P3PS1T01
Part number: 1211165
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 440 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S124P3PS2T00
Part number: 1211293
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 1,240 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S076P3TS2W00
Part number: 1219141
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 760 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SGS4-S076P3TS2T00
Part number: 1219142
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 760 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SAS4-S044P3TS2W00
Part number: 1219143
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 440 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SAS4-F028P3TS1T09
Part number: 1218883
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 280 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SAS4-F044P3PS1T02
Part number: 1218911
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 440 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F092P3PS2T01
Part number: 1219326
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 920 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F140P3PS2W02
Part number: 1219372
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,400 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F060P3TS1W01
Part number: 1219158
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 600 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SGS4-F140N3PS1W06
Part number: 1219275
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,400 mm
Switching output: NPN
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F076P3TS1W01
Part number: 1219155
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 760 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SAS4-S060N3PS1W07
Part number: 1219276
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 600 mm
Switching output: NPN
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S076P3PS1WS34
Part number: 1077734
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Without teach button with configuration software
Cross beam/parallel beam: Parallel beam active
Detection height: 760 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F060P7PS1WS23
Part number: 1071895
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: Without teach button with configuration software
Cross beam/parallel beam: Parallel beam active
Detection height: 600 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S076P3PC1WS35
Part number: 1077735
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Without teach button with configuration software
Cross beam/parallel beam: Parallel beam active
Detection height: 760 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S012P7PC2T0A
Part number: 1214835
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 120 mm
Switching output: PNP
Response time: 38 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-F028P3PS2T02
Part number: 1214336
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 280 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F140P3TS2T01
Part number: 1214075
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 1,400 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SGS4-F124P3TS2T01
Part number: 1214074
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 1,240 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SAS4-S012P7PS2T0A
Part number: 1214834
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 120 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S044P7PS2T0A
Part number: 1214832
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 440 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-F028P3PC2W0B
Part number: 1214348
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 280 mm
Switching output: PNP
Response time: 114 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-F028P3PS2W0B
Part number: 1214347
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 280 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-F012P3PS2W0B
Part number: 1214346
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 120 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-F028N3TS1W01
Part number: 1214704
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 280 mm
Switching output: NPN
Response time: 57 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SAS4-F012P7PS1W0A
Part number: 1214158
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 120 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S092P3PS2W00
Part number: 1214817
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 920 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S060P3PS2T07
Part number: 1214022
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 600 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SPL-F440PTS2W04
Part number: 1213728
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 440 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SPL-F120PTC1W04
Part number: 1214312
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 120 mm
Switching output: PNP
Response time: 38 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SPL-S120NPS1W04
Part number: 1213983
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 120 mm
Switching output: NPN
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S044P7PC2T0A
Part number: 1214833
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 440 mm
Switching output: PNP
Response time: 38 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-F028N3PC1W01
Part number: 1214794
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 280 mm
Switching output: NPN
Response time: 114 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-F028N3PS1W01
Part number: 1214757
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 280 mm
Switching output: NPN
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-F012P7PC1W0A
Part number: 1214157
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 120 mm
Switching output: PNP
Response time: 38 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S044P7PS1W01
Part number: 1214754
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 440 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F076N3PS1W01
Part number: 1214758
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 760 mm
Switching output: NPN
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SPL-S440PTS2W04
Part number: 1213730
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 440 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SPL-S120PTS2W04
Part number: 1213729
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 120 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SAS4-S028P3PS1T01
Part number: 1214138
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 280 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F060P7PS1W02
Part number: 1214855
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 600 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F076N3PC1W01
Part number: 1214793
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 760 mm
Switching output: NPN
Response time: 114 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S028P7PS1W01
Part number: 1214753
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 280 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F076N3TS1W01
Part number: 1214703
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 760 mm
Switching output: NPN
Response time: 57 ms
Connection type: Cable with M12 male connector, 4-pin

Type: SGS4-S108P7PS1T0A
Part number: 1214837
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F108P3PS1T00
Part number: 1214282
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S108P7PC1T00
Part number: 1214159
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 38 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S060P7PS1W01
Part number: 1214772
Usual availability:
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 600 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S108P7PC1T0A
Part number: 1214836
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 38 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F140P7PC1W02
Part number: 1214854
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,400 mm
Switching output: PNP
Response time: 38 ms
Connection type: Cable with M8 male connector, 4-pin

Type: SGS4-S108P3PS1W02
Part number: 1209567
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S108P3PS1T00
Part number: 1209472
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S108P7PS1T00
Part number: 1209457
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F076N3PS1T00
Part number: 1208788
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 760 mm
Switching output: NPN
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S060P7PS1W00
Part number: 1209722
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 600 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S124N3PS1T0D
Part number: 1209172
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 1,240 mm
Switching output: NPN
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S092P7PS1W00
Part number: 1208596
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 920 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F092N7PS1W00
Part number: 1209012
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 920 mm
Switching output: NPN
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S076P7PS1W00
Part number: 1209288
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 760 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F092N3CS1T00
Part number: 1208794
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 920 mm
Switching output: NPN
Response time: 19 ms
Connection type: Cable open end


Type: SGS4-F060P7PS1W00
Part number: 1209723
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 600 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F076P7PS1W00
Part number: 1209287
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 760 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F076F3PS1W14
Part number: 1209181
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 760 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S060N3PS1T0D
Part number: 1209171
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 600 mm
Switching output: NPN
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S044N3PS1T0D
Part number: 1209170
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 440 mm
Switching output: NPN
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SPL-S280PPS2W04
Part number: 1209197
Usual availability:
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 280 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-F012P3PS1T01
Part number: 1209637
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Cross beam active
Detection height: 120 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-F060N3PS1T00
Part number: 1208787
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 600 mm
Switching output: NPN
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-F028N3PS1T00
Part number: 1208786
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 280 mm
Switching output: NPN
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-F012N3PS1T00
Part number: 1208785
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 120 mm
Switching output: NPN
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-F012P3PS1W00
Part number: 1208450
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 120 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S044P3PS1W00
Part number: 1209581
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 440 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-S108F7TS2W17
Part number: 1209503
Product family: SLG
Product family group: Switching automation light grids
Operating range: 7 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Cross beam active
Detection height: 1,080 mm
Switching output: PNP
Response time: 57 ms
Connection type: Cable with M12 male connector, 4-pin


Type: SPL-F120NPS1W04
Part number: 1208550
Product family: SLG
Product family group: Switching automation light grids
Operating range: 1.5 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: Without stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 120 mm
Switching output: NPN
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-F060P3PS2T00
Part number: 1209213
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 600 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S060P3PS2W0A
Part number: 1209013
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 600 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SAS4-S012P3PS2W04
Part number: 1208464
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Slim
Aluminum stabilizer: With stabilizer
Configuration: None
Cross beam/parallel beam: Parallel beam active
Detection height: 120 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin


Type: SGS4-F140P3PS2T00
Part number: 1208809
Product family: SLG
Product family group: Switching automation light grids
Operating range: 3 m
Beam separation: 40 mm
Optical light exit: Flat
Aluminum stabilizer: With stabilizer
Configuration: Teach-in button
Cross beam/parallel beam: Parallel beam active
Detection height: 1,400 mm
Switching output: PNP
Response time: 19 ms
Connection type: Cable with M8 male connector, 4-pin