Type | Bar display and adjuster setting | |
Standard models | ||
Model | E3X-NA11 2M | |
Light source (wavelength) | Red, 4-element LED (624 nm) | |
Power supply voltage | 12 to 24 VDC ±10%, ripple (p-p): 10% max. | |
Power consumption/ Current consumption | At Power Supply Voltage of 24 VDC 840 mW max./35 mA max. At Power Supply Voltage of 12 VDC 420 mW max./35 mA max. | |
Control output | Open-collector output (NPN or PNP) Load power supply: 26.4 V max., Load current: 50 mA max. (Residual voltage: 1 V max.) Light-ON/Dark-ON mode selector. |
|
Response time | Operate or reset: 200 μs max. *1 | |
Sensitivity adjustment | 8-turn sensitivity adjuster (with indicator) | |
Protection circuits | Power supply reverse polarity protection, output short-circuit protection | |
Timer function | No timer, OFF-delay timer; or Timer selector (timer time: 40 ms (fixed)) | |
Mutual interference prevention | Up to 5 Amplifiers (optically synchronized) *2 | |
Ambient illumination | Receiver side Incandescent lamp: 10,000 lux max. Sunlight: 20,000 lux max. |
|
Number of gang-mounted Amplifiers | 16 max. (The ambient temperature specification depends on the number of gang-mounted Amplifiers.) | |
Ambient temperature range | Operating: Groups of 1 to 3 Amplifiers: - 25 °C to 55 °C Groups of 4 to 11 Amplifiers: - 25 °C to 50 °C Groups of 12 to 16 Amplifiers: - 25 °C to 45 °C Storage: - 30 °C to 70 °C (with no icing or condensation) |
|
Ambient humidity range | Operating: 35% to 85% Storage: 35% to 95% (with no condensation) |
|
Insulation resistance | 20 MΩ. min. (at 500 VDC) | |
Dielectric strength | 1,000 VAC at 50/60 Hz for 1 minute *3 | |
Vibration resistance | Destruction: 10 to 55 Hz with a 1.5-mm double amplitude for 2 hours each in X, Y and Z directions | |
Shock resistance | Destruction: 500 m/s2, for 3 times each in X, Y and Z directions | |
Degree of protection | IEC 60529 IP50 (with Protective Cover attached) | |
Connection method | Pre-wired (standard cable length: 2 m), or connector | |
Weight (packed state) *4 | Pre-wired model: Approx. 100 g, Model with connector: Approx. 55 g | |
Material | Case | Polybutylene terephthalate (PBT) |
Cover | Polycarbonate (PC) | |
Accessories | Instruction manual |