Bộ nguồn Phoenix Contact QUINT-PS/1AC/24DC/10 - 2866763 | Power supply unit
(100-240VAC/ 110-250VDC 24VDC 10A)
Mô tả
Bộ nguồn QUINT POWER với chức năng tối đa
QUINT POWER ngắt mạch từ tính và do đó nhanh chóng ngắt mạch với tốc độ gấp sáu lần dòng điện danh định, để bảo vệ hệ thống có chọn lọc và do đó tiết kiệm chi phí. Mức độ sẵn sàng cao của hệ thống được đảm bảo bổ sung, nhờ vào giám sát chức năng phòng ngừa, vì nó báo cáo các trạng thái hoạt động quan trọng trước khi xảy ra lỗi.
Khởi động đáng tin cậy các tải nặng diễn ra thông qua bộ dự trữ năng lượng tĩnh POWER BOOST. Nhờ điện áp có thể điều chỉnh, tất cả các dải từ 5 V DC ... 56 V DC đều được phủ lớp bảo vệ.
Technical Data
Input data
AC operation |
Nominal input voltage range |
100 V AC ... 240 V AC |
110 V DC ... 250 V DC |
Input voltage range |
85 V AC ... 264 V AC |
90 V DC ... 350 V DC (UL 508: ≤ 300 V DC) |
Input voltage range AC |
85 V AC ... 264 V AC |
Input voltage range DC |
90 V DC ... 350 V DC (UL 508: ≤ 300 V DC) |
Electric strength, max. |
300 V AC |
Voltage type of supply voltage |
AC/DC |
Inrush current |
< 15 A |
Inrush current integral (I2t) |
< 1.5 A2s |
AC frequency range |
45 Hz ... 65 Hz |
Frequency range DC |
0 Hz |
Mains buffering time |
> 36 ms (120 V AC) |
> 36 ms (230 V AC) |
Current consumption |
2.2 A (120 V AC) |
1.3 A (230 V AC) |
2.5 A (110 V DC) |
1.2 A (220 V DC) |
Nominal power consumption |
302 VA |
Protective circuit |
Transient surge protection; Varistor, gas-filled surge arrester |
Power factor (cos phi) |
0.85 |
Typical response time |
< 0.15 s |
Input fuse |
10 A (slow-blow, internal) |
Permissible backup fuse |
B10 B16 AC: |
Permissible DC backup fuse |
DC: Connect a suitable fuse upstream |
Recommended breaker for input protection |
10 A ... 20 A (AC: Characteristics B, C, D, K) |
Discharge current to PE |
< 3.5 mA |
Output data
Efficiency |
> 92.5 % (for 230 V AC and nominal values) |
Output characteristic |
U/I |
Nominal output voltage |
24 V DC ±1 % |
Setting range of the output voltage (USet) |
18 V DC ... 29.5 V DC (> 24 V DC, constant capacity restricted) |
Nominal output current (IN) |
10 A (-25 °C ... 60 °C, UOUT = 24 V DC) |
POWER BOOST (IBoost) |
15 A (-25 °C ... 40 °C permanent, UOUT = 24 V DC ) |
Selective Fuse Breaking (ISFB) |
60 A (12 ms) |
Magnetic circuit breaker tripping |
B2 / B4 / B6 / C2 / C4 |
Derating |
60 °C ... 70 °C (2.5%/K) |
Feedback voltage resistance |
max. 35 V DC |
Protection against overvoltage at the output (OVP) |
< 35 V DC |
Control deviation |
< 1 % (change in load, static 10 % ... 90 %) |
< 2 % (change in load, dynamic 10 % ... 90 %) |
< 0.1 % (change in input voltage ±10 %) |
Residual ripple |
< 50 mVPP (with nominal values) |
Short-circuit-proof |
yes |
Output power |
240 W |
Maximum no-load power dissipation |
9.1 W |
Power loss nominal load max. |
22 W |
Rise time |
< 0.05 s (UOUT (10 % ... 90 %)) |
Connection in parallel |
yes, for redundancy and increased capacity |
Connection in series |
yes |
Signal: DC OK active |
Output description |
UOUT > 0.9 x UN: High signal |
Switching voltage range |
18 V DC ... 24 V DC |
Maximum inrush current |
≤ 20 mA (short-circuit-proof) |
Continuous load current |
≤ 20 mA |
Signal: DC OK floating |
Output description |
Relay contact, UOUT > 0.9 x UN: Contact closed |
Maximum switching voltage |
30 V AC |
24 V DC |
Maximum inrush current |
0.5 A |
1 A |
Continuous load current |
≤ 1 A |
Signal: POWER BOOST, active |
Output description |
IOUT < IN: High signal |
Switching voltage range |
18 V DC ... 24 V DC |
Output voltage |
+ 24 V DC |
Maximum inrush current |
20 mA (short-circuit-proof) |
Continuous load current |
≤ 20 mA |
Signal: DC OK active |
Output description |
UOUT > 0.9 x UN: High signal |
Switching voltage range |
18 V DC ... 24 V DC |
Maximum inrush current |
≤ 20 mA (short-circuit-proof) |
Continuous load current |
≤ 20 mA |
Signal: DC OK floating |
Output description |
Relay contact, UOUT > 0.9 x UN: Contact closed |
Maximum switching voltage |
30 V AC |
24 V DC |
Maximum inrush current |
0.5 A |
1 A |
Continuous load current |
≤ 1 A |
Signal: POWER BOOST, active |
Output description |
IOUT < IN: High signal |
Switching voltage range |
18 V DC ... 24 V DC |
Output voltage |
+ 24 V DC |
Maximum inrush current |
20 mA (short-circuit-proof) |
Continuous load current |
≤ 20 mA |
Signal: DC OK active |
Output description |
UOUT > 0.9 x UN: High signal |
Switching voltage range |
18 V DC ... 24 V DC |
Maximum inrush current |
≤ 20 mA (short-circuit-proof) |
Continuous load current |
≤ 20 mA |
Signal: DC OK floating |
Output description |
Relay contact, UOUT > 0.9 x UN: Contact closed |
Maximum switching voltage |
30 V AC |
24 V DC |
Maximum inrush current |
0.5 A |
1 A |
Continuous load current |
≤ 1 A |
Signal: POWER BOOST, active |
Output description |
IOUT < IN: High signal |
Switching voltage range |
18 V DC ... 24 V DC |
Output voltage |
+ 24 V DC |
Maximum inrush current |
20 mA (short-circuit-proof) |
Continuous load current |
≤ 20 mA |
Connection data
Input |
Connection method |
Screw connection |
Conductor cross section solid min. |
0.2 mm² |
Conductor cross section solid max. |
2.5 mm² |
Conductor cross section flexible min. |
0.2 mm² |
Conductor cross section flexible max. |
2.5 mm² |
Conductor cross section AWG min. |
16 |
Conductor cross section AWG max. |
12 |
Stripping length |
7 mm |
Screw thread |
M3 |
Tightening torque, min |
0.5 Nm |
Tightening torque max |
0.6 Nm |
Output |
Connection method |
Screw connection |
Conductor cross section solid min. |
0.2 mm² |
Conductor cross section solid max. |
2.5 mm² |
Conductor cross section flexible min. |
0.2 mm² |
Conductor cross section flexible max. |
2.5 mm² |
Conductor cross section AWG min. |
16 |
Conductor cross section AWG max. |
12 |
Stripping length |
7 mm |
Screw thread |
M3 |
Tightening torque, min |
0.5 Nm |
Tightening torque max |
0.6 Nm |
Signal |
Connection method |
Screw connection |
Conductor cross section solid min. |
0.2 mm² |
Conductor cross section solid max. |
2.5 mm² |
Conductor cross section flexible min. |
0.2 mm² |
Conductor cross section flexible max. |
2.5 mm² |
Conductor cross section AWG min. |
16 |
Conductor cross section AWG max. |
12 |
Screw thread |
M3 |
Tightening torque, min |
0.5 Nm |
Tightening torque max |
0.6 Nm |
LED signaling
Types of signaling |
LED |
Active switching output |
Relay contact |
Signal output: DC OK active |
Status display |
UOUT > 0.9 x UN: "DC OK" LED green |
Note on status display |
UOUT < 0.9 x UN: Flashing "DC OK" LED |
IOUT < IN: LED ON |
Signal output: DC OK floating |
Status display |
UOUT > 0.9 x UN: "DC OK" LED green |
Note on status display |
UOUT < 0.9 x UN: Flashing "DC OK" LED |
Signal output: POWER BOOST, active |
Status display |
IOUT > IN: LED "BOOST" yellow |
Electrical properties
Number of phases |
1.00 |
Insulation voltage input/output |
4 kV AC (type test) |
2 kV AC (routine test) |
Insulation voltage output / PE |
500 V DC (routine test) |
Insulation voltage input / PE |
3.5 kV AC (type test) |
2 kV AC (routine test) |
Product properties
Product type |
Power supply |
MTBF (IEC 61709, SN 29500) |
> 940000 h (25 °C) |
> 530000 h (40 °C) |
> 230000 h (60 °C) |
Insulation characteristics |
Protection class |
I |
Degree of pollution |
2 |
Dimensions
Width |
60 mm |
Height |
130 mm |
Depth |
125 mm |
Installation dimensions |
Installation distance right/left |
5 mm / 5 mm |
Installation distance top/bottom |
50 mm / 50 mm |
Alternative assembly |
Width |
122 mm |
Height |
130 mm |
Depth |
63 mm |
Mounting
Mounting type |
DIN rail mounting |
Assembly instructions |
alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm vertically
alignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom |
Mounting position |
horizontal DIN rail NS 35, EN 60715 |
With protective coating |
No |
Material specifications
Housing material |
Metal |
Hood version |
Galvanized sheet steel, free from chrome (VI) |
Side element version |
Aluminum |
Environmental and real-life conditions
Ambient conditions |
Degree of protection |
IP20 |
Ambient temperature (operation) |
-25 °C ... 70 °C (> 60 °C Derating: 2,5 %/K) |
Ambient temperature (storage/transport) |
-40 °C ... 85 °C |
Ambient temperature (start-up type tested) |
-40 °C |
Maximum altitude |
5000 m |
Climatic class |
3K3 (in acc. with EN 60721) |
Max. permissible relative humidity (operation) |
≤ 95 % (at 25 °C, non-condensing) |
Shock |
18 ms, 30g, in each space direction (according to IEC 60068-2-27) |
Vibration (operation) |
< 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6) |
15 Hz ... 150 Hz, 2.3g, 90 min. |
Standards and regulations
Rail applications |
EN 50121-4 |
EN 50121-3-2 |
HART FSK Physical Layer Test Specification Compliance |
Output voltage UOut compliant |
Standard – Limitation of mains harmonic currents |
EN 61000-3-2 |
Standard - Electrical safety |
IEC 61010-2-201 (SELV) |
Standard - Equipment safety |
BG (design tested) |
Standard - Approval for medical use |
IEC 60601-1, 2 x MOOP |
Standard – Safety extra-low voltage |
IEC 61010-1 (SELV) |
IEC 61010-2-201 (PELV) |
Standard - Safe isolation |
IEC 61010-2-201 |
Standard - safety for equipment for measurement, control, and laboratory use |
IEC 61010-1 |
Approval - requirement of the semiconductor industry with regard to mains voltage dips |
SEMI F47-0706 Compliance Certificate |
DeviceNet approval |
DeviceNet™ Power Supply Conformance Tested |
Overvoltage category |
EN 62477-1 |
III |
Approval data
CSA |
CAN/CSA-C22.2 No. 60950-1-07 |
CSA-C22.2 No. 107.1-01 |
Shipbuilding approval |
DNV GL (EMC B), ABS, LR, RINA, NK, BV |
SIQ |
BG (type approved) |
UL approvals |
UL Listed UL 508 |
UL/C-UL Recognized UL 60950-1 |
UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous Location) |
DeviceNet approval |
DeviceNet™ Power Supply Conformance Tested |
Conformity/Approvals |
SIL in accordance with IEC 61508 |
0 |
EMC data
Low Voltage Directive |
Conformance with Low Voltage Directive 2014/35/EC |
Electromagnetic compatibility |
Conformance with EMC Directive 2014/30/EU |
EMC requirements for noise emission |
EN 61000-6-3 |
EN 61000-6-4 |
EMC requirements for noise immunity |
EN 61000-6-1 |
EN 61000-6-2 |
Noise immunity |
EN 61000-6-2 |
Electrostatic discharge |
Standards/regulations |
EN 61000-4-2 |
Electrostatic discharge |
Contact discharge |
8 kV (Test Level 4) |
Discharge in air |
15 kV (Test Level 4) |
Comments |
Criterion A |
Electromagnetic HF field |
Standards/regulations |
EN 61000-4-3 |
Electromagnetic HF field |
Frequency range |
80 MHz ... 1 GHz |
Test field strength |
20 V/m (Test Level 3) |
Frequency range |
1 GHz ... 2 GHz |
Test field strength |
10 V/m (Test Level 3) |
Frequency range |
2 GHz ... 3 GHz |
Test field strength |
10 V/m (Test Level 3) |
Comments |
Criterion A |
Fast transients (burst) |
Standards/regulations |
EN 61000-4-4 |
Fast transients (burst) |
Input |
4 kV (Test Level 4 - asymmetrical) |
Output |
2 kV (Test Level 3 - asymmetrical) |
Signal |
2 kV (Test Level 4 - asymmetrical) |
Comments |
Criterion A |
Surge voltage load (surge) |
Standards/regulations |
EN 61000-4-5 |
Input |
2 kV (Test Level 3 - symmetrical) |
4 kV (Test Level 4 - asymmetrical) |
Output |
1 kV (Test Level 2 - symmetrical) |
2 kV (Test Level 3 - asymmetrical) |
Signal |
1 kV (Test Level 2 - asymmetrical) |
Comments |
Criterion B |
Conducted interference |
Standards/regulations |
EN 61000-4-6 |
Conducted interference |
I/O/S |
asymmetrical |
Frequency range |
0.15 MHz ... 80 MHz |
Comments |
Criterion A |
Voltage |
10 V (Test Level 3) |
Emitted interference |
Standards/regulations |
EN 61000-6-3 |
Radio interference voltage in acc. with EN 55011 |
EN 55011 (EN 55022) Class B, area of application: Industry and residential |
Emitted radio interference in acc. with EN 55011 |
EN 55011 (EN 55022) Class B, area of application: Industry and residential |
Criterion A |
Normal operating behavior within the specified limits. |
Criterion B |
Temporary impairment to operational behavior that is corrected by the device itself. |
Commercial Data
Item number |
2866763 |
Packing unit |
1 pc |
Minimum order quantity |
1 pc |
Product Key |
CMPQ13 |
Catalog Page |
Page 159 (C-6-2015) |
GTIN |
4046356113793 |
Weight per Piece (including packing) |
1,497 g |
Weight per Piece (excluding packing) |
1,100 g |
Customs tariff number |
85044030 |
Country of origin |
TH |
- Xem chi tiết Tài liệu kỹ thuật/ Datasheet Phoenix Contact QUINT-PS/1AC/24DC/10 - 2866763
ở đây.
Tham khảo thêm các model khác cùng loại:
Power supply unit
QUINT-PS/1AC/24DC/10 - 2866763
Primary-switched power supply unit, QUINT POWER, Screw connection, DIN rail mounting, SFB Technology (Selective Fuse Breaking), input: 1-phase, output: 24 V DC / 10 A
Power supply unit
QUINT-PS/1AC/24DC/40 - 2866789
Primary-switched power supply unit, QUINT POWER, Screw connection, DIN rail mounting, SFB Technology (Selective Fuse Breaking), input: 1-phase, output: 24 V DC / 40 A
Power supply unit
QUINT-PS/1AC/24DC/ 3.5 - 2866747
Primary-switched power supply unit, QUINT POWER, Screw connection, SFB Technology (Selective Fuse Breaking), input: 1-phase, output: 24 V DC / 3.5 A
Power supply, with protective coating
QUINT-PS/ 1AC/24DC/20/CO - 2320898
Primary-switched power supply unit, QUINT POWER, Screw connection, DIN rail mounting, SFB Technology (Selective Fuse Breaking), input: 1-phase, output: 24 V DC / 20 A
Power supply, with protective coating
QUINT-PS/1AC/24DC/10/CO - 2320911
Primary-switched power supply unit, QUINT POWER, Screw connection, DIN rail mounting, SFB Technology (Selective Fuse Breaking), input: 1-phase, output: 24 V DC / 10 A
Power supply, with protective coating
QUINT-PS/1AC/24DC/ 5/CO - 2320908
Primary-switched power supply unit, QUINT POWER, Screw connection, DIN rail mounting, SFB Technology (Selective Fuse Breaking), input: 1-phase, output: 24 V DC / 5 A
Power supply unit
QUINT4-PS/1AC/24DC/20 - 2904602
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 1-phase, output: 24 V DC/20 A
Power supply unit
QUINT4-PS/1AC/24DC/10 - 2904601
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 1-phase, output: 24 V DC/10 A
Power supply unit
QUINT4-PS/1AC/24DC/5 - 2904600
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 1-phase, output: 24 V DC/5 A
Power supply unit
QUINT4-PS/1AC/24DC/10/+ - 2904616
Primary-switched QUINT POWER supply for DIN rail mounting, with selectable output characteristic curve and SFB (Selective Fuse Breaking) Technology, protective coating and integrated decoupling MOSFET, input: 1-phase, output: 24 V DC / 10 A
Power supply unit
QUINT4-PS/1AC/24DC/40 - 2904603
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 1-phase, output: 24 V DC/40 A
Power supply unit
QUINT4-PS/1AC/24DC/2.5/SC - 2904598
Primary-switched power supply unit, QUINT POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 2.5 A
Power supply unit
QUINT4-PS/1AC/24DC/20/+ - 2904617
Primary-switched QUINT POWER supply for DIN rail mounting, with selectable output characteristic curve and SFB Technology (selective fuse breaking), protective coating and integrated decoupling MOSFET, input: 1-phase, output: 24 V DC / 20 A
Power supply unit
QUINT4-PS/1AC/24DC/1.3/SC - 2904597
Primary-switched power supply unit, QUINT POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 1.3 A
Power supply unit
QUINT4-PS/1AC/24DC/3.8/SC - 2904599
Primary-switched power supply unit, QUINT POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 3.8 A
Power supply unit
QUINT4-PS/1AC/24DC/3.8/PT - 2909577
Primary-switched power supply unit, QUINT POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 3.8 A
Power supply unit
QUINT4-PS/1AC/24DC/2.5/PT - 2909576
Primary-switched power supply unit, QUINT POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 2.5 A
Power supply unit
QUINT4-PS/1AC/24DC/1.3/PT - 2909575
Primary-switched power supply unit, QUINT POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 1.3 A
Power supply unit
QUINT4-PS/1AC/24DC/10/CO - 2904625
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, NFC interface, and protective coating, input: 1-phase, output: 24 V DC / 10 A
Power supply unit
QUINT4-SYS-PS/1AC/24DC/2.5/SC - 2904614
Primary-switched power supply unit, QUINT POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 2.5 A
Power supply unit
QUINT-PS/1AC/24DC/20 - 2866776
Primary-switched power supply unit, QUINT POWER, Screw connection, DIN rail mounting, SFB Technology (Selective Fuse Breaking), input: 1-phase, output: 24 V DC / 20 A
Power supply unit
QUINT-PS/1AC/24DC/ 5 - 2866750
Primary-switched power supply unit, QUINT POWER, Pluggable screw connection, DIN rail mounting, SFB Technology (Selective Fuse Breaking), input: 1-phase, output: 24 V DC / 5 A
Battery charger
QUINT4-CHARGER/1AC/24DC/10 - 2907990
Battery charger, QUINT CHARGER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 10 A
Power supply unit
QUINT-PS/3AC/24DC/40 - 2866802
Primary-switched power supply unit, QUINT POWER, Screw connection, DIN rail mounting, SFB Technology (Selective Fuse Breaking), input: 3-phase, output: 24 V DC / 40 A
Power supply unit
QUINT-PS/ 1AC/24DC/20/TWINSET - 2901665
DIN rail power supply unit 24 V DC/20 A, primary switched-mode, 1-phase. The SFB technology (Selective Fuse Breaking Technology) can now also be used to trigger standard power circuit breakers reliably and quickly.
DC/AC inverter
QUINT4-INV/24DC/1AC/600VA/USB - 1067325
Inverter, QUINT INVERTER, DIN rail mounting, input:24 V DC, output:1AC / 600 VA, Pure sine.
Power supply, with protective coating
QUINT-PS/3AC/24DC/20/CO - 2320924
Primary-switched power supply unit, QUINT POWER, Screw connection, SFB Technology (Selective Fuse Breaking), input: 3-phase, output: 24 V DC / 20 A
Energy storage
UPS-BAT/LI/24DC/128WH - 1396415
Energy storage, Lithium-Ion (LiFePO4), 24 V DC, 128 Wh. Only for QUINT4-UPS/24DC/24DC/… from V/C 06, 2320270 QUINT-UPS/1AC/1AC/500VA from V/C 07, 2320283 QUINT4-UPS/1AC/1AC/1KVA from V/C 04, and 1067327 QUINT4-UPS/1AC/1AC/500VA/USB from V/C 02.
Power supply unit
QUINT4-PS/3AC/24DC/40/IOL - 1151047
Primary-switched power supply unit, QUINT POWER, Screw connection, DIN rail mounting, input: 3-phase, output: 24 V DC / 40 A
Power supply unit
QUINT4-PS/3AC/24DC/20/IOL - 1151048
Primary-switched power supply unit, QUINT POWER, Screw connection, DIN rail mounting, input: 3-phase, output: 24 V DC / 20 A
Power supply unit
QUINT4-PS/3AC/24DC/40 - 2904623
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 3-phase, output: 24 V DC/40 A
Power supply unit
QUINT4-PS/3AC/24DC/20 - 2904622
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 3-phase, output: 24 V DC/20 A
Power supply unit
QUINT4-PS/3AC/24DC/10 - 2904621
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 3-phase, output: 24 V DC/10 A
Power supply unit
QUINT4-PS/3AC/24DC/5 - 2904620
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 3-phase, output: 24 V DC/5 A
Power supply unit
QUINT4-PS/1AC/24DC/20/+/... - 2908940
Version of the QUINT POWER primary-switched power supply for DIN rail mounting programmed according to customer specifications, with selectable output characteristic curve and SFB (Selective Fuse Breaking) Technology, protective coating and integrated decoupling MOSFET, input: 1-phase, output: 24 V DC/20 A
Power supply unit
QUINT4-PS/1AC/24DC/40/... - 2908936
Customer-specifically programmed version of the primary-switched QUINT POWER power supply for DIN rail mounting with free choice of output characteristic curve and SFB (selective fuse breaking) technology, input: 1-phase, output: 24 V DC/40 A
Power supply unit
QUINT4-PS/1AC/24DC/20/... - 2907869
Customer-specifically programmed version of the primary-switched QUINT POWER power supply for DIN rail mounting with free choice of output characteristic curve and SFB (selective fuse breaking) technology, input: 1-phase, output: 24 V DC/20 A
Power supply unit
QUINT4-PS/1AC/24DC/10/... - 2907867
Customer-specifically programmed version of the primary-switched QUINT POWER power supply for DIN rail mounting with free choice of output characteristic curve and SFB (selective fuse breaking) technology, input: 1-phase, output: 24 V DC/10 A
Power supply unit
QUINT4-PS/1AC/24DC/5/... - 2907866
Customer-specifically programmed version of the primary-switched QUINT POWER power supply for DIN rail mounting with free choice of output characteristic curve and SFB (Selective Fuse Breaking) technology, input: 1-phase, output: 24 V DC / 5 A
Power supply unit
QUINT4-PS/1AC/24DC/20/S6 - 1385896
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 1-phase, output: 24 V DC/20 A
Power supply unit
QUINT4-PS/1AC/24DC/20/+/C01 - 1364968
Preconfigured version of the primary-switched QUINT POWER power supply with preset output voltage (24.5 V), input: 1-phase, output: 24 V DC/20 A
Power supply unit
QUINT4-PS/1AC/24DC/20/+/C02 - 1364965
Preconfigured version of the primary-switched QUINT POWER power supply with preset output voltage (26 V), input: 1-phase, output: 24 V DC/20 A
Power supply unit
QUINT4-PS/1AC/2X15DC/2/PT - 2904596
Primary-switched power supply unit, QUINT POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 15 V / 2 A
QUINT-REDSET/1AC/24DC/10/CO - 2906298
The redundancy set consists of two QUINT-PS/1AC/24DC/10 power supplies combined with the active QUINT-ORING/24DC/2X10/1X20 redundancy module, so as to guarantee maximum availability of your system.
Set
QUINT-REDSET/1AC/24DC/20/CO - 2906299
The redundancy set consists of two QUINT-PS/1AC/24DC/20 power supplies combined with the active QUINT-ORING/24DC/2X20/1X40 redundancy module, so as to guarantee maximum availability of your system.
Set
QUINT-REDSET/1AC/24DC/40 - 2906257
The redundancy set consists of two QUINT-PS/1AC/24DC/40 power supplies combined with the active QUINT-ORING/24DC/2X40/1X80 redundancy module, so as to guarantee maximum availability of your system.
Set
QUINT-REDSET/1AC/24DC/20 - 2906256
The redundancy set consists of two QUINT-PS/1AC/24DC/20 power supplies combined with the active QUINT-ORING/24DC/2X20/1X40 redundancy module, so as to guarantee maximum availability of your system.
Set
QUINT-REDSET/1AC/24DC/10 - 2906255
The redundancy set consists of two QUINT-PS/1AC/24DC/10 power supplies combined with the active QUINT-ORING/24DC/2X10/1X20 redundancy module, so as to guarantee maximum availability of your system.
Power supply unit
QUINT-PS/1AC/48DC/20 - 2866695
Primary-switched power supply unit, QUINT POWER, Screw connection, SFB Technology (Selective Fuse Breaking), input: 1-phase, output: 48 V DC / 20 A
Power supply unit
QUINT-PS/1AC/12DC/20 - 2866721
Primary-switched power supply unit, QUINT POWER, Screw connection, SFB Technology (Selective Fuse Breaking), input: 1-phase, output: 12 V DC / 20 A
Power supply unit
QUINT4-PS/1AC/12DC/2.5/PT - 2904605
Primary-switched power supply unit, QUINT POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 12 V DC / 2.5 A
Power supply unit
QUINT4-PS/1AC/12DC/15 - 2904608
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (Selective Fuse Breaking) Technology, and NFC interface, input: 1-phase, output: 12 V DC / 15 A
Power supply unit
UNO-PS/1AC/24DC/ 60W - 2902992
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/60 W
Power supply unit
UNO-PS/1AC/24DC/ 30W - 2902991
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/30 W
Power supply unit
QUINT4-PS/1AC/12DC/7.5/PT - 2904607
Primary-switched power supply unit, QUINT POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 12 V DC / 7.5 A
Power supply unit
UNO-PS/1AC/24DC/100W - 2902993
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/100 W
Power supply unit
QUINT4-PS/1AC/5DC/5/PT - 2904595
Primary-switched power supply unit, QUINT POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 5 V DC / 5 A
Power supply unit
UNO-PS/1AC/24DC/150W - 2904376
Primary-switched UNO power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/150 W
Uninterruptible power supply replacement battery
UPS-BAT-KIT/PB/2X12V/4AH - 1283116
Replacement battery, VRLA-AGM, 2x12 V DC, 4 Ah. Only for 1274117 UPS-BAT/PB/24DC/4AH, 2320267 QUINT-UPS/24DC/24DC/10/3.4AH from V/C 06, 2905908 TRIO-UPS-2G/1AC/1AC/120V/750VA, and 2905909 TRIO-UPS-2G/1AC/1AC/230V/750VA
Power supply unit
QUINT4-PS/1AC/48DC/20 - 2904612
QUINT POWER primary-switched power supply with free choice of output characteristic curve, SFB (Selective Fuse Breaking) Technology, and NFC interface, input: 1-phase, output: 48 V DC/20 A
Interference filter
ME-MAX-NEF/QUINT20A - 2319919
Filter for adherence to the EMC category EMC1 in shipbuilding for the QUINT-PS/1AC/24DC/20 power supply
Power supply unit
UNO-PS/1AC/24DC/100W/H - 1088851
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/100 W
Power supply unit
QUINT-PS/2AC/1DC/24DC/20 - 2320830
Primary-switched DIN rail power supply unit. AC input: suitable for operation between two phases (400 V AC). DC input: suitable for operation in an FI intermediate circuit. Output: 24 V DC/20 A.
Power supply unit
UNO-PS/1AC/24DC/90W/C2LPS - 2902994
Primary-switched UNO POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/90 W
DC/DC converters
QUINT-PS/12DC/24DC/ 5 - 2320131
Primary-switched QUINT DC/DC converter for DIN rail mounting with SFB (Selective Fuse Breaking) Technology, input: 12 V DC, output: 24 V DC/5 A
Power supply unit
QUINT4-PS/1AC/48DC/10 - 2904611
Primary-switched QUINT POWER power supply for DIN rail mounting with free choice of output characteristic curve and SFB (Selective Fuse Breaking) technology, input: 1-phase, output: 48 V DC / 10 A
Power supply unit
QUINT4-PS/1AC/110DC/4 - 2904613
Primary-switched power supply unit, QUINT POWER, Screw connection, input: 1-phase, output: 110 V DC / 4 A
Power supply unit
QUINT4-PS/1AC/48DC/10/CO - 2904626
Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, NFC interface, and protective coating, input: 1-phase, output: 48 V DC / 10 A
Power supply unit
QUINT4-PS/1AC/48DC/5 - 2904610
Primary-switched QUINT POWER power supply for DIN rail mounting with free choice of output characteristic curve and SFB (Selective Fuse Breaking) technology, input: 1-phase, output: 48 V DC / 5 A
Power supply unit
UNO2-PS/1AC/24DC/240W - 1096432
Primary-switched power supply unit, UNO POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 10 A
Power supply unit
UNO2-PS/1AC/24DC/120W - 1110466
Primary-switched power supply unit, UNO POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 5 A
Power supply unit
UNO2-PS/1AC/24DC/480W - 2910105
Primary-switched power supply unit, UNO POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 20 A