The pluggable electromechanical and solid-state relays in the RIFLINE complete product range and the base are recognized and approved in accordance with UL 508. The relevant approvals can be called up at the individual components in question.
Product type | Solid-state relay module |
Product family | RIFLINE complete |
Application | Universal |
Operating mode | 100% operating factor |
Insulation characteristics | |
Insulation | Basic insulation |
Insulation characteristics: Air clearances and creepage distances between the power circuits | |
Insulation | Basic insulation |
Overvoltage category | III |
Pollution degree | 2 |
Maximum power dissipation for nominal condition | 0.19 W |
Test voltage (Input/output) | 2.5 kVrms (50 Hz, 1 min., input/output) |
Air clearances and creepage distances between the power circuits | |
Rated insulation voltage | 250 V AC |
Rated surge voltage | 4 kV |
Rated actuating voltage UC | 24 V DC |
Voltage range with reference to UC | 0.8 ... 1.2 |
Rated actuating current IC | 8 mA |
Input voltage range | 19.2 V DC ... 28.8 V DC |
"0" signal switching threshold in reference to UC | < 0.4 |
"1" signal switching threshold in reference to UC | > 0.8 |
Typical response time | 10 ms |
Typical turn-off time | 10 ms |
Status display | Yellow LED |
Protective circuit | Freewheeling diode |
Transmission frequency | 10 Hz |
Contact switching type | 1 N/O contact |
Design of digital output | electronic |
Output voltage range | 24 V AC ... 253 V AC (50/60 Hz) |
Limiting continuous current | 750 mA (see derating curve) |
Maximum inrush current | 30 A (10 ms) |
Min. load current | 10 mA |
Leakage current | 1 mA (in off state) |
Surge current | 30 A AC (tp = 20 ms, at 25°C) |
Phase angle cos phi min | 0.5 |
Max. load value | 4.5 A2s (tp = 10 ms, at 25 °C) |
Surge voltage protection | > 275 V |
Voltage drop at max. limiting continuous current | < 1 V |
Output circuit | 2-conductor, zero voltage switch |
Protective circuit | RCV circuit |
Utilization category CB Scheme (IEC 60947-5-1) | AC12, 0.75 A/250 V |
Connection method | Push-in connection |
Stripping length | 8 mm |
Conductor cross section rigid | 0.14 mm² ... 1.5 mm² |
Conductor cross section flexible | 0.14 mm² ... 1.5 mm² |
0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve) | |
Conductor cross section AWG | 24 ... 16 |
Width | 6.2 mm |
Height | 93 mm |
Depth | 66 mm |
Flammability rating according to UL 94 | V2 (Housing) |
Ambient conditions | |
Degree of protection | IP20 |
Ambient temperature (operation) | -25 °C ... 60 °C |
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Corrosive gas test | |
Identification | ISA-S71.04. G3 Harsh Group |
EN 60068-2-60 |
Air clearances and creepage distances between the power circuits | |
Standards/regulations | DIN EN 60947-5-1 |
Mounting type | DIN rail mounting |
Assembly instructions | in rows with zero spacing |
Mounting position | any |
Item number | 2905295 |
Packing unit | 10 pc |
Minimum order quantity | 1 pc |
Product key | CK652K |
Catalog page | Page 323 (C-5-2019) |
GTIN | 4046356945431 |
Weight per piece (including packing) | 24.67 g |
Weight per piece (excluding packing) | 22.008 g |
Customs tariff number | 85364110 |
Country of origin | JP |
ECLASS-11.0 | 27371604 |
ECLASS-12.0 | 27371604 |
ECLASS-13.0 | 27371604 |
ETIM 8.0 | EC001504 |
UNSPSC 21.0 | 39122300 |
REACh SVHC | Lead 7439-92-1 |
China RoHS | Environmentally Friendly Use Period = 50 years |
For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads” |