HỖ TRỢ THẾ GIỚI THÔNG QUA CÔNG NGHỆ ROBOTIC TIÊN TIẾN
Được thành lập tại Shimizu, Nhật Bản vào năm 1976, Intelligent Actuator Incorporated (IAI) có hơn 40 năm kinh nghiệm trong việc thiết kế và sản xuất robot công nghiệp và y tế tùy chỉnh. Được xây dựng dựa trên “Chất lượng và Đổi mới”, IAI là công ty đi đầu trong việc nghiên cứu và phát triển các rô-bốt Cartesian, SCARA và Tabletop tiên tiến tiết kiệm năng lượng với giá cả phải chăng. Từ mô hình cơ bản đến mô hình tốc độ cao, IAI cung cấp các hệ thống và thành phần hoàn chỉnh có thể lập trình để đáp ứng mọi nhu cầu thử nghiệm y tế và sản xuất công nghiệp của bạn.
Các hệ thống và thành phần IAI bao gồm đầy đủ các ứng dụng y tế bao gồm xét nghiệm bệnh truyền nhiễm, chẩn đoán phân tử, lấy mẫu mô và máu, nghiên cứu bộ gen, nghiên cứu ung thư, dược phẩm và sản xuất thiết bị y tế. Dự án hệ thống mới nhất của IAI đã tích hợp Robot Cartesian 3 trục vào thiết bị sàng lọc ung thư để hỗ trợ quá trình đột phá nhằm phát hiện và xác định một số loại ung thư.
Hiện tại, IAI đang hỗ trợ cộng đồng y tế bằng cách cung cấp các bộ phận rô-bốt cho các hệ thống xét nghiệm phân tử trong phòng thí nghiệm Covid-19. Đại dịch hiện nay đã tạo ra nhu cầu cấp thiết về nhiều công cụ xét nghiệm và chẩn đoán để sẵn sàng sử dụng trên toàn thế giới. Mối quan tâm cấp bách là giao hàng nhanh, cài đặt và lập trình để nhanh chóng tích hợp và tối ưu hóa sản xuất.
IAI đẩy nhanh việc giao hàng bằng cách dự trữ hàng trăm bộ phận của bộ truyền động điện có thể dễ dàng kết hợp để đáp ứng các thông số kỹ thuật chính xác của khách hàng. Phương pháp sản xuất này giảm thời gian quay vòng xuống mức tối thiểu và cung cấp các sản phẩm được lắp ráp sẵn hoàn chỉnh sẵn sàng để sử dụng khi giao hàng. Các tùy chọn có thể tùy chỉnh dựa trên các ứng dụng được chỉ định bao gồm: Kích thước/dấu chân, tốc độ/gia tốc, tải trọng, cấu hình trục XYZ-ZR và hướng của bộ truyền động.
Rô-bốt IAI Cartesian có hàng trăm cấu hình kết hợp từ 2 trục đến 6 trục và được trang bị Bộ mã hóa tuyệt đối không dùng pin có độ phân giải cao theo tiêu chuẩn. (Không dùng pin, Không cần bảo trì, Không cần thay thế và Không cần về nhà vì luôn biết vị trí hiện tại). Có chương trình trên tàu để dễ vận hành. Tùy chọn ZR-Axis (dọc/xoay) hiện khả dụng để cho phép các hệ thống camera xử lý và phân tích hình ảnh trong khi tải di chuyển.
Ngôn ngữ lập trình đơn giản và các sản phẩm được định dạng sẵn giúp dễ dàng tích hợp tất cả các sản phẩm IAI với các thành phần khác và khởi động và chạy nhanh chóng.
Radial Cylinders:
EC-RR6SW | EC-RR6HW | EC-RR6MW | EC-RR6LW |
EC-RR7SW | EC-RR7HW | EC-RR7MW | EC-RR7LWELECYLINDER® section of 2021 General Catalog
Move over air hoses. Make some space for the ELECYLINDER®.
EC Series provide super easy electric cylinder control.
- A built-in digital speed controller lets you enter numbers precisely and check how long the positioning will take during the design stage.
- Each EC includes a ball screw with a built-in linear guide, motor, battery-less absolute encoder, and controller!
24VDC Power supply: PSA-24 (without fan) | PSA-24L (with fan)
Touch Panel Teaching Pendant (Universal for Position/ Program controller):
TB-03 (Wireless connection for ELECYLINDER only) or (Cable connect to ELECYLINDER and controllers)
TB-02 (Cable connect to ELECYLINDER and controllers)
Teaching Software (Windows7/10) for Position Controller: IA-OS | IA-OS-C
Teaching Software (Windows7/10) for Program Controller: IA-101-N | IA-101-X-MW-JS | IA-101-XA-MW | IA-101-X-USBS | IA-101-X-MW | IA-101-X-USBMW
General Catalog 2021 Controller Reference1stGenaral-Catalog-2021_Controller_CE9001-8-1A-321 (2022MAY)3212022-05
Controller
(Compatible Gears)
EC | TT | ACON | DCON | PCON | RCON | SCON | MSEL | RSEL | XSELIAI Compatible Gear
Equipment that can be Connected to IAI Products
IAI products are easily connectable with various Factory Automation devices, such as PLCs, Motion Networks, Touch panels, and a 3D simulator.
1ACE0278-1A (2021JUN)122021-06
ELECYLINDERStandardUltra Large Slider type: EC-S18H | EC-S18M | EC-S18L
Ultra Large Slider (High payload specification): EC-S18LP
Ultra Large Slider (High payload specification with mid support): EC-S18XLP |Ultra Large Slider Type ELECYLINDER®
- Maximum stroke of 2800mm. - Maximum speed of 2000mm/s.
- Maximum payload of 400kg horizontally and 80kg vertically.
- Wireless teaching support allows for easy setup if the actuator is out of reach.
1ACE0299-1A (2023JAN)322023-01
ELECYLINDERDust-resistant
Dust-proof/Splash-proof spec.: EC-S6LW | EC-S6MW | EC-S6HW | EC-S6SW | EC-S7LW | EC-S7MW | EC-S7HW | EC-S7SWDust-resistant and Dust-proof/Splash-proof ELECYLINDER®
Electric actuators with IP44 protection can be used for machining processes that generate dust.
- Proprietary internal structure for increased dust-proof/ splash-proof performance.
- Simple wireless operation: No need to connect a communication cable to the actuator.
Ultra-Mini Rod type with rolling bushing: EC-GDS3L
Ultra-Mini Rod type with ball bearing: EC-GDB3M | EC-GDB3L
Ultra-Mini Table type: EC-T3M | EC-T3LUltra-Mini ELECYLINDER®
Believe it: A built-in controller at this size resolves all kinds of small air cylinder problems!
Select from three types according to the application: Slider, Rod, Table
Speed can be set with numbers from 1% (low speed) to 100% (high speed), enabling the same motion regardless of the operator.
Applicable Controllers:
EC Series products are equipped with a built-in controller.ELECYLINDER® Wide Slider Type
The wide body is equipped with a built-in ball circulating type linear guide. It is most suitable to heavy workpieces and large overhang applications.
AVD (Acceleration, Velocity and Deceleration) can be individually set up to suppress vibrations and shorten cycle times.
All necessary functions are built-in including controller and teaching functions to reduce the time needed for designing, starting-up and adjusting.
3.1ACE0280-3.1A (2022OCT)362022-10
ELECYLINDERStandardEC-SRG11L | EC-SRG11M | EC-SRG11H
EC-SRG15L | EC-SRG15M | EC-SRG15HEC-SRG11 / EC-SRG15 Rod type with double guide
New ELECYLINDER is now available with a Ball Bush Guide.
- Operates with only a 24V power source
- Best suited for lifting and pushing transfer operations
EC Stopper Cylinder Catalog
A small size version and a low-cost version are available.
- Workpieces up to 50kg.
- Maximum collision speed of workpiece: 40m/min. (in case of 9kg workpiece)
1ACE0295-1.1A (2022OCT)242022-10
ELECYLINDERStandardEC-ST15ME-50
EC Stopper Cylinder Economical Type
A low-cost stopper cylinder is now available.
- Workpieces up to 50kg.
- Maximum collision speed of workpiece: 40m/min. (in case of 9kg workpiece)
1ACE0294-1A (2022FEB)22022-02
ELECYLINDERStandardEC-S10S | EC-S10H | EC-S10M | EC-S10L
EC-S10XS | EC-S10XH | EC-S10XM | EC-S10XL
Applicable Controllers:
EC Series products are equipped with a built-in controller.
The "PSA-200" DC motor power unit is required for any ELECYLINDER that uses 200V servo motors.ELECYLINDER® Large Slider Type
Compared to the conventional pulse motor model this large slider type has a longer stroke and operates at higher speeds.
- Maximum stroke 2500mm - Maximum speed 2000m/s - Maximum payload 108kg
- Standard-equipped with battery-less absolute encoder.
- Double slider specification is available as an option.
- Can be installed with bolts from the top face.
- Compatible with wireless teaching allowing test runs from a distance.
- Motor drive DC power unit can supply power for up to 6 axes.
3ACE0273-3A (2021NOV)402021-11
ELECYLINDERStandardEC-GRB8M-20 | EC-GRB10M-30 | EC-GRB13M-40 | EC-GRB13L-40ELECYLINDER® Gripper Type
Easy set up in just 4 steps!
Built-in controller saves equipment space.
Four low price variations available.
1ACE0284-1A (2021SEP)282021-09
ELECYLINDERStandard
Mini Rod Type: EC-RP5S | EC-RP5H | EC-RP5M | EC-RP5L
EC-GD5S | EC-GD5H | EC-GD5M | EC-GD5L
Mini Table Type: EC-TC5S | EC-TC5H | EC-TC5M | EC-TC5L
EC-TW5S | EC-TW5H | EC-TW5M | EC-TW5LELECYLINDER® Mini Type Rods/Tables
New additions with more stroke, speed, and power for our mini type lineup!
Ideal for reducing space required by devices.
ISDB-S-60 | ISPDB-S-60 | ISDBCR-S-60 | ISPDBCR-S-60
ISDB-M-100 | ISDB-M-200 | ISPDB-M-100 | ISPDB-M-200 | ISDBCR-M-100 | ISDBCR-M-200 | ISPDBCR-M-100 | ISPDBCR-M-200
ISDB-L-200 | ISDB-L-400 | ISPDB-L-200 | ISPDB-L-400 | ISDBCR-L-200 | ISDBCR-L-400 | ISPDBCR-L-200 | ISPDBCR-L-400Special Specification Products
Information on Dedicated Models of the most requested special specifications.
You can now check for special specifications using this catalog.
2ACE0277-2A (2021APR)322021-04
Special BrochureELECYLINDER
ROBO CylinderMini ROBO Cylinder and EC: Switching from Air to Electric
Do you find it difficult to switch? Switching is easier than you think!
Electric cylinders are available at equivalent sizes to replace air cylinders.
Mini ROBO Cylinders are compact thanks to a hollow motor that makes the overall length short.1stEC_and_Mini-ROBO-Cylinder
_Switching_from_Air_to_
Electronic_2pFlyer_2021020922021-02
Special BrochureELECYLINDERELECYLINDER Achieves DX* of the Production Line
* DX = Digital Transformation
ELECYLINDER transforms the production line by using digital advancements to improve efficiencies.
Digitally setting accurate travel times eliminates bottlenecks and brings significant cost savings.1stEC_2pflyer_degital_
transformation_2021020122021-02
Special Brochure
RCON driver-linkage type controllerIntroducing IAI Controllers Supporting Motion Networks
IAI's RCON driver-linkage type controller now supports three motion networks!
MECHATROLINK-III , EtherCAT , SSCNET-III / H
High-speed operations synchronized with general-purpose servo motors are possible.
Great for short cycle-time automation equipment used in packaging and picking electronics components.1stRCON_2pflyer_added_
3_motion_networks_2021020122021-02
Lineup Overview of Grippers and Rotaries2020 Gripper & Rotary Products Lineup1stN/A42020-05
Specifications Chart of Grippers and Rotaries2020 Gripper & Rotary Products Specifications Chart1stN/A22020-05
Product OverviewStandard
Overview of IAI modelsProduct Overview Brochure
See what IAI has to offer! Discover our full range of motion control systems, including the New ELE CYLINDER, SCARA robots, Cartesian robots, linear actuators, table top robots, electric actuators, intelligent controllers & software, and ROBO Cylinder® electric cylinders — the smart alternative to air.
30.8ACE0033-30.8A Overview82019-03
Get a preview of upcoming new products:
- Affordable 3 D Vision System developed by IAI.
- E C - Simple, High performance.
- Wireless I / O Controller.
- R O B O Cylinder® Lineup including new R C S 4 series (AC sevo motor).
- Synchronous control of 256 axes with IA motion controller.
- New I X A Series S C A R A Robot with top-class speed and cost performance.
- C a r t e s i a n Robots with high precision/ rigidity/ payload/ speed.
- 6 - Axis C a r t e s i a n Robot with orthogonal + swivel/ oscillation motion.
- Electric G r i p p e r with adjustable grip force.
- S e r v o P r e s s with high-precision loading repeatability.
- T a b l e t o p Robot of 168 types and automatic programming from DXF data.
International Robot Exhibition 2017
New Visions of Production Facilities.
Special BrochureOverviewTransforming Manufacturing by CT Effects Leaflet
The key to reducing production costs is found in CT effects. You may be able to further reduce the costs if you look closely at the CT effects. So what exactly are CT effects?2ndCJ0196-2A-UST-1-111262012-11
Special BrochureOverviewImprovement of Production Efficiency Leaflet
A case study that reduced the running costs by $262,700 over 3 years by changing to electric actuators.
An application example of a semi-automatic machine for inspection and testing of connectors.1stCJ0190-1A-UST-2-071642016-07
Overview7 Benefits of ROBO Cylinder® Brochure
Learn the benefits of going electric with ROBO Cylinder® in this easy to follow 7 point brochure. The Benefits are: Multiple Positioning, Push and Hold, Acceleration/ Deceleration, Zone Output, Pause Input, Incremental Moves, Speed Change During Movement.
2ndUST-7RC-3-031642016-03
OverviewIntro to ROBO Cylinder® Brochure
See what ROBO Cylinder® has to offer! Keep the pneumatic blues away with the energy efficient, highly functional, feature packed ROBO Cylinder® electric actuators.3rdUST-Intro-3-1009202009-10
Special BrochureOverviewGreen Automation Flyer
Green Automation: Energy Efficiency, Greater Productivity, Cost Saving, Sustainable Manufacturing. Achieve "Green" with IAI's ROBO Cylinder®.2ndUST-GA-2-080822008-08
Special BrochureOverviewThe Intelligent Solution Flyer
Discerning engineers all over the world choose IAI's ROBO Cylinder®. See how IAI's electric actuators will transform your business and ROI.1stUST-IS-1-020822008-02
Special BrochureOverviewIAI - Quality and Innovation (Z-fold)
"Quality and Innovation" is our corporate philosophy that motivates us to provide the highest standards for our customers. When you demand innovative and high quality products, excellent service and support for your unique needs, demand IAI!2ndCorpInfo-2-020832008-02
ELECYLINDER
EC-B6S | EC-B6SU | EC-DB6S | EC-DB6SU
EC-B7S | EC-B7SU | EC-DB7S | EC-DB7SUNew Additions for EC Belt Driven Type
- New additions consists of EC Belt types with built-in Digital Speed Controller with buttons to allow setting up positions, acceleration, velocity, deceleration.
1stECBelt Type with Digital Speed Controller (2020OCT)82020-10
ELECYLINDER
Slider: Standard, Belt drive, High rigidity
Rod: Standard, Radial cylinder, High rigidity
Table: Mini type
Rotary
Stopper cylinder
ELECYLINDER® Introduction Catalog
An easy to follow introduction to ELECYLINDER actuator types.
- Simple Setup. Only the start point and end point are required.
- Built-in controller.
- Optional built-in digital speed controller.
- Wireless connection option.
- long life and 1/5 electrical consumption than an air cylinder.
- Easily repairable in the event of a breakdown.
1stCE0268-1A (2020JUN)642020-06
ELECYLINDER
EC-RTC9 | EC-RTC12ELECYLINDER® Rotary Type
New Rotary type has been added to the ELECYLINDER series.
- Smooth acceleration and deceleration eliminates impacts.
- 2-point positioning.
- Built-in controller.
- Wireless connection option.1stCE0271-1A (2020JUN)202020-06
ELECYLINDER
Standard
Stopper Cylinder:
EC-ST15EC Stopper Cylinder
New Stopper Cylinder type has been added to the ELECYLINDER series.
- Ideal as a workpiece-stopper on a conveyor line without air source.
- Workpieces up to 50kg.1stCE0270-1A22020-03
Applicable Controllers:
EC Series products are equipped with a built-in controller.EC Belt Driven type
New Belt Driven type ELECYLINDERs have been added to the EC series.
Also, new additions with Digital Speed Controller have been added.
- Max. stroke: 2600mm
- Max. speed: 1600mm/s
- Max. payload: 20kg1stCE0267-1.5A (2020OCT)302020-10
ELECYLINDER
Splash-proof Type:
EC-R6☐W | EC-R7☐W
EC-RR6☐W | EC-RR7☐W
High-Rigidity Type:
EC-RR3 | EC-RR4
EC-S6☐AHR | EC-S7☐AHR
EC-RR6☐R | EC-RR7☐R
EC-RR6☐AHR | EC-RR7☐AHR
EC-S6☐AH | EC-S7☐AH
EC-RR6☐AH | EC-RR7☐AH
EC-RR6 | EC-RR7
Standard Type:
EC-S3 | EC-S4
EC-S6 | EC-S7
EC-R6 | EC-R7
EC-S6☐R | EC-S7☐R
Compact Type:
EC-TC4 | EC-TW4
EC-GS4 | EC-GD4Newest Additions to the ELECYLINDER Series
New types have joined the EC family.
- Small types (Sliders) (Radial Cylinders)
- High-rigidity types (Sliders) (Radial Cylinders)
- Splash-proof type (Radial Cylinders)
- Side-mounted motor types
Lineup-from (CE0250-10A-2019-10)122019-10
RCP6-RRA4R-WA-35P | RCP6-RRA6R-WA-42P | RCP6-RRA7R-WA-56PROBO Cylinder® Pulse Press RCP6-RRA
A pulse press is an actuator combining a stepper motor and load cell, that is capable of performing power control.
* Capable of both pushing and pulling
* Less than half the cost of an IAI servo press
* Select from several types based on push force from 60N to 2,000N2ndCE0286-2A (2021OCT)322021-10
Rotary HollowStandard
RCP6-RTFMLRCP6-RTFML
Slim and lightweight Rotary with large-diameter hollow shaft of φ49, suitable for combined axes is available.
Learn More1stCE0261-1A (0219)122019-01
Rotary Chuck GripperStandard
RCP6-RTCKSPE | RCP6-RTCKSPI | RCP6-RTCKSRE | RCP6-RTCKSRI | RCP6-RTCKMPE | RCP6-RTCKMPI | RCP6-RTCKMRE | RCP6-RTCKMRIRCP6-RTCK
Rotary Chuck can be rotated to any angle. Motorized rotation and gripping consolidated into a single unit.
Learn More1stCE0262-1A (0219)282019-01
GripperStandard
Applicable Controllers: MCON-C | MCON-CG | MCON-LC | MCON-LCG | MSEL-PC | MSEL-PG | PCON-CB | PCON-CGB | PCON-CYB | PCON-PLB | PCON-POB | RCM-P6PC | RCONRCP6(S)-GRST Long stroke gripper type
* Long stroke gripper is ideal for grasping large workpieces
* High grip force of up to 440N
* Equipped with a Battery-less absolute encoder as standard
* Built-in controller type available
Learn More1stCE0260-1A (0618)242018-06
Gripper SolenoidStandard
Solenoid Grippers: GRS-SEG-4 | GRS-SIG-4 | GRS-MEG-4 | GRS-MIG-4
Driver box: GRS-DBGRS Solenoid Gripper type Catalog
* ON/OFF control with a single wire
* Small, affordable, easy to operate!
(Compact, Mini, Small Size)1stCE0258-1A (0618)122018-06
GripperStandard
RCP6-GRT7A-WA-28P | RCP6-GRT7B-WA-28P
Applicable Controllers: PCON-CYB | PCON-PLB | PCON-POB |PCON-CB | PCON-CGB | MCON-C | MCON-CG | MCON-LC | MCON-LCG | MSEL-PC | MSEL-PG | RCM-P6PCRCP6-GRT7 Thin Gripper Catalog
New Type Equipped with Battery-less Absolute Encoder.
Flat shape, thin size with height of 39 mm achieved.
- High Rigidity
- High Grip Force
- Improved Mounting Freedom
Learn More1stCE0252-1A (0717)122017-07
Wrist UnitStandard
WU-S | WU-M
Applicable Controllers: MSEL-PC | MSEL-PGWU Wrist Unit Catalog
Rotating joint 2-axis Wrist Unit is now available!
IAI's Unique design makes the parts light and compact.
Ideal for reducing the cost of equipment such as 6-axis articulated robots.
Learn More1.1CE0251-1.1A (2022AUG)202022-08
Applicable Controllers: PCON-CYB | PCON-PLB | PCON-POB | PCON-CB | PCON-CGB | PCON-CFB | PCON-CGFB | MCON-C | MCON-CG | MCON-LC | MCON-LCG | MSEL-PC | MSEL-PG | RCM-P6PCRCP6 / RCP6S Next Generation ROBO Cylinder® Catalog
Select the Product That Best Suits Your Needs from an Abundant Lineup of 156 Models.
- New Controller Series Added
- New Cleanroom Specification Series Added
- New Dust/Splash-proof Specification Series Added
- Battery-less Absolute Encoder as Standard.
- Improved Positioning Repeatability.
- PowerCON® Compatible
- Built-in Controller Type Is Available for All Models.
* High-precision (positioning repeatability) option is available up to ±5µm for SA/WSA type.
Learn More3rdCE0238-3A-10172882017-10
Applicable Controllers: ACON-CYB | ACON-PLB | ACON-POB | ACON-CB | ACON-CGB | MCON-C | MCON-CG | MCON-LC | MCON-LCG | ASEL-CS | RCM-P6AC | SCON-CB | SCON-CGB | SCON-LC | SCON-LCG | SSEL-CS | XSEL-P | XSEL-QMini ROBO Cylinder® Cleanroom / Dust / Splash-Proof Catalog
Cleanroom, dust-proof and splash-proof models have been added to 5 types, with 3 sizes of each type, for a total of 15 models.
Models are available with the same shape as a typical air cylinder.
This ROBO Cylinder can be used in applications where limited space previously required air cylinders.
Learn More
(Micro, Compact, Mini, Small Size)1stCE0253-1A (0917)402017-09
Applicable controllers: SCON-CB-30D | SCON-CGB-30DRCS3 Servo Press Compatible ROBO Cylinder® with Load Cell Catalog
Compact and low-thrust rod type actuator that can even be used for simple pressing. The high-precision position control enables easy adjustment of the push force and the position control, which is typically difficult for oil-hydraulic equipment. A High-Payload Type without Load Cell is also available.
NOTE: * If a Load Cell Calibration Certificate is required from the load cell vendor, there is an extra charge and it must be ordered on the same PO as the actuator. Ordering the certificate after purchasing the actuator will require sending the load cell back to Japan.
Learn More3rdCE0237-3.6A (2020NOV)502020-11
Applicable controllers: ACON-CB | SCON-CBAC Servo ROBO Cylinder® with Battery-less Absolute Encoder Catalog
Battery-less Absolute Type Added to 24V and 200V Servo Actuator Models RCA, RCS2, RCS3.
Controllers ACON-CB, DCON-CB, SCON-CB are equipped with a feature to detect motor overload and generates an alarm.1stCE0235-1A (3/2016)882016-06
Applicable controllers: PCON-CA | PCON-CFA | MSEP-C | MSEP-LC | MSEL-PC | MSEL-PG
Notice for Discontinuation of PCON-CA/CFA - October 2021RCP5 with Battery-less Absolute Encoder as Standard Equipment Catalog
New Additions to the Series: Side-mounted Motor and Belt Types.
7thCE0215-7A (0116)922016-01
Applicable controllers: MSEP-C | MSEP-LC | PCON-CA | PSEL-CS | MSEL-PC | MSEL-PG | PSEP | PMEC | PCON-CY | PCON-PL | PCON-PO | PCON-SE
Notice for Discontinuation of PCON-CA/CFA - October 2021RCP2 Cleanroom, Dust/Splash-proof Rotary Types Catalog
Cleanroom Type and Dust-proof/Splash-proof Type are now added to the lineup of the rotary type actuators.
1stCJ0223-1A-UST-1-0615162015-06
GripperDust-proof
Applicable Controllers: MSEP-C | MSEP-LC | PCON-CA | PCON-PL | PCON-PO | PCON-SE | PSEL-CS
Notice for Discontinuation of PCON-CA/CFA - October 2021RCP2 Cleanroom, Dust-proof Gripper Types Catalog
Cleanroom type and Dust-proof type are now added to the lineup of the two-fingered gripper RCP2-GRS/GRM and three-fingered gripper RCP2-GR3SS/GR3SM series.
1stCJ0218-1A-UST-1-0315122015-03
Applicable controllers: MSEP-C | MSEP-LC | PCON-CA | MSEL-PC | MSEL-PG
Notice for Discontinuation of PCON-CA/CFA - October 2021RCP4-SA3/RA3, RCP4CR-SA3 New Additions Catalog
SA3/RA3 Type with 32mm Actuator Width Now Has a Side-mounted Motor Type.
- RCP4-SA3R - Side-mounted Motor, Slider Type
- RCP4-RA3R - Side-mounted Motor, Radial Cylinder Rod Type
Learn More3rdCE0220-3A (1215)162015-12
GripperStandard
Applicable controllers: DSEP-C | DSEP-CW | DCON-CA | MSEP-C | PCON-CA | PCON-PL | PCON-PO | PCON-SE | PSEL-CS
Notice for Discontinuation of PCON-CA/CFA - October 2021RCD, RCP2, RCP4 Vertical Grippers Catalog
High-speed Opening/Closing and High Grip Force, the ROBO Cylinder® Vertical Grippers.
- Slider Type and Lever Type
- Supporting Multi-point Positioning, Adjustable Gripping Force
- Highly Rigid, Accurate Guide and Driving Part
- Self-locking Mechanism to Prevent the Work Part from Dropping upon Power Off
- Ultra-compact Slider Type: RCD-GRSNA
Learn More1stCJ0207-1A-UST-2-0914322014-09
ROBO Cylinder®
RCS3-CT8C | RCS3-CTZ5C
Applicable controllers: XSEL-PCT | XSEL-QCT | SCON-CARCS3-CT8C Slider/CTZ5C Table High-speed Types Catalog
High-speed type — Max. speed of 2500 mm/s and max. acceleration of 3.2 G.
(Instantaneous max. acceleration of 4.8 G)1stCJ0210-1A-UST-2-081482014-08
ROBO Cylinder®
RCP4W-RA6C | RCP4W-RA7C
Applicable controllers: PCON-CA | PCON-CFA
Notice for Discontinuation of PCON-CA/CFA - October 2021RCP4W-RA Water-proof Radial Cylinder Series Catalog
IP67 Water-proof Radial Cylinder, the newest addition to the dust-proof/ splash-proof ROBO Cylinder® RCP4W series.
Built-in guide to achieve longer strokes while accommodating a radial load on the rod!1stCJ0205-1A-UST-2-0214162014-02
ROBO Cylinder® MiniStandard
RCA2-RN | RCA2-RP | RCA2-GS | RCA2-GD | RCA2-TCA | RCA2-TWA | RCA2-TFA | RCS2-RN5N | RCS2-RP5N | RCS2-GS5N | RCS2-GD5N | RCS2-TCA5N | RCS2-TWA5N | RCS2-TFA5NMini ROBO Rod / Table Type Brake Option Catalog
Mini ROBO Cylinder rod type / table type with brake option has been added. Adding a brake to the rear of the main body will change the size and appearance of the actuator.1stCJ0209-1A-UST-1-101342013-10
ROBO Cylinder®
ERC3-SA | ERC3-RA | ERC3CR-SA | ERC3D-SAERC3 Series Built-in Controller Catalog
Transform your factory with the efficiency-improving, space-saving ERC3 ROBO Cylinder®.
- Saves space with a built-in controller
- Supports wide-ranging operations with longer strokes
- Payloads and speeds have been increased by 1.5 times
- Most affordable in our ROBO Cylinder® series!4thCJ0184-4A-UST-2-0214562014-02
Applicable controller: PCON-CA
Notice for Discontinuation of PCON-CA/CFA - October 2021RCP4W Dust/Splash-proof Series Catalog
A first for slider-type ROBO Cylinders! Dust-proof/Splash-proof performance of IP65, plus at-will installation configuration flexibility.
You can select either industrial grease (Daphne Eponex No. 2) (standard) or food grade grease (Medallion FM No.1) for the guides and ball screw in the actuator.2ndCJ0189-2A-UST-2-0214162014-02
Applicable controllers: PCON-CA | MSEP-C
Notice for Discontinuation of PCON-CA/CFA - October 2021RCP4 High Speed/Power Series and PCON-CA Catalog
PowerCON Brings 150% the Output, 1.5 Times the Speed and Double the Payload Achievable with Standard Controllers
The side-mounted motor specification and cleanroom specification (class 10) have been added to the power controller RCP4 series.4thCJ0182-4A-UST-1-0113522013-01
NOTE: PSEL, ASEL, SSEL controllers updated to PSEL-CS, ASEL-CS, & SSEL-CS controllers
NOTE: Please check our latest "General controller reference catalog PDF" and/or contact us to confirm current controller lineup.
Mini ROBO Cylinder®
Catalog
Achieve all the performance and benefits of electric actuation in a durable, yet compact size. IAI’s Mini ROBO Cylinder® variations have been expanded with additional RCS2 series and additional stroke 50/75 mm.
NOTE: Please check our latest "General controller reference catalog PDF" and/or contact us to confirm current controller lineup.
(Compact, Mini, Small Size)6thCJ0143-6A-UST-1-11121682012-11
ROBO Cylinder® Mini
RCD-RA1DA
Applicable controllers: DSEP-C | DSEP-CW | MSEP-C | MSEP-LC | DCON-CARCD Mini Cylinder Catalog
Ultra-compact motorized cylinder with 12mm cross-section and a body length as short as 60 mm.
(Micro, Compact, Mini, Small Size)3rdCJ0185-3A-UST-2-041542015-04
ROBO Cylinder®StandardRCP2-RA8C | RCP2-RA8R
Applicable controller: PCON-CFRCP2-RA8C/RA8R Rod Type Catalog
RA8 (85-mm wide) electric actuators have been added to the ROBO Cylinder® RCP2 rod type series. A unit that can develop push forces between our existing high thrust and the existing lower thrust units is now available.1stCJ0177-1A-UST-1-101182011-10
Applicable controllers: XSEL-J | SCON | SSEL | XSEL-P | XSEL-QRCS3(P)-SA8/SS8 RCS3(P)CR-SA8/SS8 Catalog
1.8 times the maximum speed, 1.3 times the payload. Enjoy significantly higher traveling performance and positioning repeatability. Side-Mounted Motor Type has been added to the lineup.2ndCJ0165-2A-UST-1-0111202011-01
ROBO Cylinder®
CleanroomRCP3-SA5C | RCP3-SA6C | RCP2-SA5C | RCP2-SA6C | RCP2CR-SA5C | RCP2CR-SA6C | RCA2-SA5C | RCA2-SA6C | RCA-SA5C | RCA-SA6C | RCS2-SA5C | RCS2-SA6C | RCACR-SA5C | RCACR-SA6C | RCS2CR-SA5C | RCS2CR-SA6CHigh-Speed Slider Type SA5/SA6 Lead 20mm Flyer
High-Speed Specification ROBO Cylinder Slider Type SA5/SA6. New 20mm lead has been added to the lineup.1stCJ0175-1A-UST-1-011122011-01
Applicable controllers: SCON | SSEL | XSEL-P | XSEL-QRCS2-RTC Large Diameter Hollow Rotary Catalog
The RCS2-RTC features significant increase in accuracy, speed, and torque. Adoption of the hollow structure provides a large diameter hollow rotary actuator series with improved usability.1stCJ0167-1A-UST-1-101082010-10
RCP2-GRHM | RCP2-GRHB
Applicable controllers: PMEC-C | PSEP-C | PSEP-CW | PCON-C | RPCON | PSEL-C
NOTE: PSEL, ASEL, SSEL controllers updated to PSEL-CS, ASEL-CS, & SSEL-CS controllersRCP2 Medium and Large High-force
Grippers Catalog
The RCP2-GRHM / GRHB are a high-force gripper series that offers much greater gripping force and moment rigidity. The full lineup includes models of various sizes from small to large.
(Compact, Mini, Small Size)1stCJ0162-1A-UST-1-101042010-10
Gripper
Standard
Applicable controllers: PCON | PSEL | RPCON
NOTE: PSEL, ASEL, SSEL controllers updated to PSEL-CS, ASEL-CS, & SSEL-CS controllers.RCP2-GRST Long-Stroke Gripper Flyer
The RCP2-GRST Long-Stroke Gripper offers up to 100mm stroke and 40N of gripping force. The gripper is offered in standard and high-speed versions.1stRCP2-GRST_CJ0139-1A-UST-1-040922009-04
Applicable controllers: XSEL-J | XSEL-K | SCON | SSEL | XSEL-P | XSEL-QRCS2-SRA7 Short Body Type Brochure
The new compact rod type electric actuator have been engineered to achieve an even smaller foot print and is 21.5mm shorter than the previous model.
(Compact, Small Size)1stCJ0140-1A-UST-1-040942009-04
ROBO Cylinder® Mini
RCP2CR-GRSS-I-20P-30-8-P1 | RCP2CR-GRLS-I-20P-30-180-P1 | RCP2W-GRSS-I-20P-30-8-P1 | RCP2W-GRLS-I-20P-30-180-P1
Applicable controllers: PCON | PSEL | RPCON
NOTE: PSEL, ASEL, SSEL controllers updated to PSEL-CS, ASEL-CS, & SSEL-CS controllers.RCP2 Mini-Gripper Cleanroom/Dust-proof Type Grippers Flyer
The RCP2CR Cleanroom specification gripper and RCP2W Dustproof gripper offers multi-point positioning in a small compact body. Both the Cleanroom and Dustproof grippers come as a slide type and lever type.
(Compact, Mini, Small Size)1stCJ0136-1A-UST-1-120822008-12
RCP2 / RCA-SRA Short Length Type Catalog
The new RCP2 / RCA-SRA series short type electric actuator length has been reduced by up to 45%. Double guides are available offering versatile installation.
1stCJ0131-1A-Oct-2008242008-10
Applicable controllers: ACON-C | ACON-CG | ACON-CY | ACON-PL | ACON-PO | ACON-SE | RACON | ASEL-CRCL-SA Micro Slider Brochure
The MicroSlider RCL-SA is a space saving ultra compact linear servo slider optimized for high speed load transfer. 3 sizes to choose from, the MicroSlider offers 2G acceleration and a max stroke of 64mm.
(Micro, Compact, Mini, Small Size)1stCJ0130-1A42008-08
Applicable controllers: ACON-C | ACON-CG | ACON-CY | ACON-PL | ACON-PO | ACON-SE | ASEL-CRCL Micro Cylinder® Brochure
Ultra-small Linear Servo Cylinder perfect for installation in confined spaces.
(Micro, Compact, Mini, Small Size)2ndRCL- CJ0123-2A42011-07
Gripper
Standard
RCP2-GRSS | RCP2-GRLS
Applicable controllers: PCON-C | PCON-CG | PCON-CY | PCON-PL | PCON-PO | PCON-SE | PSEL-C
NOTE: PSEL, ASEL, SSEL controllers updated to PSEL-CS, ASEL-CS, & SSEL-CS controllers.RCP2-GRSS/ GRLS Small Gripper Slide/Lever Types Brochure
New motorized grippers achieve high grip force and long stroke in a compact body.
(Compact, Mini, Small Size)2ndCJ0124-2A-UST-2-070842008-07
ROBO Cylinder®
RCS2-RA13R
Applicable controllers: SCON-CRCS2-RA13R Ultra-High Thrust Type Catalog
This servo press provides high-precision positioning control and a maximum of 2 tons of pressing force thanks to its high-output servo motor. This makes it easy to set the pressing force adjustment and position control that are difficult to do with hydraulic presses.2ndCJ0107-2A162011-07
ROBO Cylinder®
Water-proof
RCP2W-SA16
Applicable controller: RCP2-CF-SA16RCP2W Waterproof Type Catalog
RCP2W Slider Waterproof type ROBO Cylinder®. According to our study, it is the first in the industry to fully conform to the IEC IP67 rating. This water-proof electric actuator can withstand strong, repeated splashes and washing processes.2ndCJ0076-2A-142006-03
GripperStandard
RCP2-GR3LS | RCP2-GR3LM | RCP2-GR3SS | RCP2-GR3SM
Applicable controllers: RCP2-C-GR3LS | RCP2-C-GR3LM | RCP2-CG-GR3LS | RCP2-CG-GR3LM | RCP2-C-GR3SS | RCP2-C-GR3SM | RCP2-CG-GR3SS | RCP2-CG-GR3SMRCP2-GR3L /GR3S 3-Finger Lever /Slide Type Grippers Brochure
New concept grippers that securely grip circular and cylindrical loads. Also allows for easy adjustment of gripping force. The 3-fingers grip simultaneously and automatically centers the load.1stRCP2GR3LS-CJ0083-1A-Aug1805-142005-09
Single-Axis ActuatorStandard
Wide Type: ISB-WXM-WA-750 | ISPB-WXM-WA-750 |
Applicable controllers: RCON | RSEL | SCON-CB | SCON-CGB | SSEL-CS | XSEL-P | XSEL-Q | XSEL-RA | XSEL-SA
IS(P)B-WXM / WXMW LARGE Single-Axis Robot Series Catalog
Large single-axis types with a 400kg horizontal payload are available now!
Mid Support suppresses deflection of the ball screw, making long-stroke and high-speed operations possible.
- Max stroke 3000 mm. - Maximum speed 2500 mm/s.
- Max acceleration/deceleration 1.2G.
- Max payload capacity: Horizontal 400kg , Vertical 80kg.2ndCE0276-2A (2022JUL)202022-07
Single-Axis ActuatorStandard
Dust-proof
105mm Body width, 100W motor type: IFA-SA1L-WA-100 | IFA-SA2L-WA-100 | IFA-SA3L-WA-100 | IFA-SA1R-WA-100 | IFA-SA2R-WA-100 | IFA-SA3R-WA-100 |
134mm Body width, 200W motor type: IFA-MA1L-WA-200 | IFA-MA2L-WA-200 | IFA-MA3L-WA-200 | IFA-MA1R-WA-200 | IFA-MA2R-WA-200 | IFA-MA3R-WA-200 |
134mm Body width, 400W motor type: IFA-MA1L-WA-400 | IFA-MA2L-WA-400 | IFA-MA3L-WA-400 | IFA-MA1R-WA-400 | IFA-MA2R-WA-400 | IFA-MA3R-WA-400
Applicable controllers: RCON | RSEL | SCON-CB | SCON-CGB | SSEL-CS | XSEL-P | XSEL-Q | XSEL-RA | XSEL-SA
IFA High-speed Belt Driven Actuator
The long 3200mm stroke IFA can move 40kg up to 3000mm/sec!
- Max stroke: 3200mm
- Max payload: 40kg
- Max speed: 3000mm/s
- The high speed and acceleration shortens cycle times.1stCE0288-2.1A (2022MAR)322022-03
Single-Axis ActuatorStandard
NSA-MXMS-WA-200 | NSA-MXMM-WA-200 | NSA-LXMS-WA-400 | NSA-LXMM-WA-400 | NSA-LXMXS-WA-400 | NSA-LXMXM-WA-400 | NSA-WXMS-WA-750 | NSA-WXMM-WA-750 | NSA-WXMXS-WA-750 | NSA-WXMXM-WA-750
Applicable controllers: MSCON-C | RCON | RSEL | SCON-CAL | SCON-CGAL | SCON-CB | SCON-CGB | SSEL-CS | XSEL-P | XSEL-Q | XSEL-RA | XSEL-SANSA Rotating Nut Type Actuator Catalog
Ultra-high speed with long stroke.
The very latest rotating nut type actuator -NSA.
Equipped with a Battery-less absolute encoder.
- Stroke: 2,300mm
- Max. speed: 2,500mm/s
- Max. payload: 120kg
Learn More2ndCE0266-2A (2020AUG)722020-08
Single-Axis ActuatorStandard
Dust-proof
Cleanroom
A complete set of two ISB Series PDFs in a zip file.
IS(P)B-WXM Large Single-Axis Robot Series Catalog
Wide Type: ISB-WXM-750 | ISPB-WXM-750 |
Wide Mid-support Type: ISB-WXMX-750 | ISPB-WXMX-750Download this complete set of two ISB Series PDFs in a zip file.
See below for details.
ISB/SSPA Single-Axis Robot Series Catalog #CE0172-2A-UST-2.5A (0618)
A major revamp of the single-axis robot IS series with improvements all around; from preciseness, rigidity and payload capacity to speed and acceleration/deceleration.
* High-precision type is available and positioning repeatability is up to ±3µm.
IS(P)B-WXM LARGE Single-Axis Robot Series Catalog #CE0276-1A (2020SEP)
Large single-axis types with a 400kg horizontal payload are available now!
- Maximum stroke 3000 mm.
- Maximum speed 2500 mm/s.
- Maximum acceleration/deceleration 1.2G.
- Maximum payload capacity: Horizontal 400kg , Vertical 70kg.CE0172-2A-UST-2.5A (0618)
Applicable controllers: XSEL-P (6 axes) | XSEL-Q (6 axes) | XSEL-J (4 axes) | XSEL-K (4 axes) | SSEL (2 axes) | SCON (1 axis)ISA/ ISPA-W ISDACR/ ISPDACR-W Super Large Single-Axis Robots Catalog
These Super Large Single-Axis Robots (Standard / Cleanroom Types) are capable of transferring loads weighing up to 150 kg for a maximum distance of 2500 mm. The maximum speed of 2000 mm/sec and maximum acceleration / deceleration of 1 G will help shorten your cycle time.3rdISPAW-CJ0088-3A-UST-2-0615162015-06
Single-Axis ActuatorStandard
ISA-SXM | ISPA-SXM | ISA-SYM | ISPA-SYM | ISA-SZM | ISPA-SZM | ISA-MXM | ISPA-MXM | ISA-MXMX | ISPA-MXMX | ISA-MYM | ISPA-MYM | ISA-MZM | ISPA-MZM | ISA-LXM | ISPA-LXM | ISA-LXMX | ISPA-LXMX | ISA-LXUWX | ISPA-LXUWX | ISA-LYM | ISPA-LYM | ISA-LZM | ISPA-LZM | ISA-WXM | ISPA-WXM | ISA-WXMX | ISPA-WXMX |
Applicable controllers: XSEL-P (6 axes) | XSEL-Q (6 axes) | XSEL-J (4 axes) | XSEL-K (4 axes) | SSEL (2 axes) | SCON (1 axis)Click to a specific catalog section:
P000-040: ISA/ISPA Single-Axis (16.7MB)
P041-066: ICSA/ICSPA Cartesian (4.2MB)
P067-144: ICSA2/ICSPA2 Two-Axes Cartesian Model Specs (22.2MB)
P145-240: ICSA3/ICSPA3 Three-Axes Cartesian Model Specs (11.4MB)
P241-245: ISA/ISPA Technical Reference (2.0MB)
The ISPA is a high-precision positioning system comprised of a base, linear guides, ball screw and AC Servo motor. It achieves high rigidity through a smaller size and a Base-Integrated Guide Structure.4thCJ0063-4A-UST-1-0213412013-02
Single-Axis ActuatorStandard
FS-11LM | FS-12LM | FS-11HM | FS-12HM | FS-11LO | FS-12LO
Applicable controllers: XSEL-P (6 axes) | XSEL-Q (6 axes) | XSEL-J (4 axes) | XSEL-K (4 axes) | SSEL (2 axes) | SCON (1 axis)FS-L Large Flexible System Belt Drive Series Catalog
The FS-L series actuator provides up to 3000mm stroke. High-Speed and High-Payload types available. The timing belt enables the FS series to perform quietly at high speeds. This high speed capability combined with high acceleration allows for short cycle times. FS-LO guide module has been added.1stFS-L-Series-UST-1-021392013-02
Single-Axis ActuatorStandard
FS-11NM | FS-12NM | FS-11NO | FS-12NO | FS-11WM | FS-12WM | FS-11WO | FS-12WO
Applicable controllers: XSEL-P (6 axes) | XSEL-Q (6 axes) | XSEL-J (4 axes) | XSEL-K (4 axes) | SSEL (2 axes) | SCON (1 axis)FS Flexible System Belt Drive Series Catalog
The FS series single-axis actuator was designed for light work, and high speed positioning. The timing belt enables the FS series to perform quietly at high speeds. This high speed capability combined with high acceleration allows for short cycle times.1stFS_Catalog92011-07
Single-Axis ActuatorSplash-proof
ISWA-S | ISPWA-S | ISWA-M | ISPWA-M | ISWA-L | ISPWA-L
Applicable controllers: XSEL-P (6 axes) | XSEL-Q (6 axes) | XSEL-J (4 axes) | XSEL-K (4 axes) | SSEL (2 axes) | SCON (1 axis)ISWA / ISPWA Splash-Proof Robot Catalog
The lineup of Splash-Proof Sliders has been extended. You can now choose a splash-proof actuator of desired size to match your specific application.2ndISWA-CJ0069-2A-UST-1-100982009-10
Single-Axis ActuatorStandard
NS-SXMS | NS-SXMM | NS-SZMS | NS-SZMM | NS-MXMS | NS-MXMM | NS-MXMXS | NS-MZMS | NS-MZMM | NS-LXMS | NS-LXMM | NS-LXMXS | NS-LZMS | NS-LZMM
Applicable controllers: XSEL-P (6 axes) | XSEL-Q (6 axes) | SSEL (2 axes) | SCON (1 axis)NS Rotating Nut Linear Actuator Catalog
A nut rotating single-axis actuator that provides long stroke and high speed. Maximum speed of 2400mm/s and a maximum acceleration of 1G greatly reduces cycle time.4thCJ0108-4A-1-UST-0709242009-07
Single-Axis ActuatorStandard
IF-SA | IF-MA
Applicable controllers: XSEL-P (6 axes) | XSEL-Q (6 axes) | XSEL-J (4 axes) | XSEL-K (4 axes) | SSEL (2 axes) | SCON (1 axis)IF Belt Drive Type Actuator Catalog
The IF is a high-rigidity belt-driven single-axis actuator. The IF Series has proven itself in providing torsional rigidity, reliability, and high speeds.5thIF-UST-5-040982009-04
Single-Axis ActuatorDust-proof
Applicable controllers: XSEL-P (6 axes) | XSEL-Q (6 axes) | XSEL-J (4 axes) | XSEL-K (4 axes) | SSEL (2 axes) | SCON (1 axis)ISDA/ ISPDA ISDACR/ ISPDACR Dust-Proof / Cleanroom Actuators Catalog
The dust-proof type and cleanroom type both adopt a protective structure made of a stainless steel. You can set a maximum acceleration / deceleration of up to 1 G.2ndISDA_CJ0085-2-UST-2A202008-06
Single-Axis RotaryStandard
Applicable controllers: SCON-CB | SCON-CGB | SCON-LC | SCON-LCG | XSEL-P | XSEL-Q | XSEL-R | XSEL-SDDA Direct Drive Motor Series Catalog
Introducing the direct drive motor DDA Series boasting ultimate usability with high speed, high payload, high accuracy, and easy to control.
Learn More1stCE0242-1A (0916)202016-09
Single-Axis RotaryStandard
DD-T18S | DD-T18P | DD-LT18S | DD-LT18P | DD-H18S | DD-H18P | DD-LH18S | DD-LH18P
Applicable controllers: SCON-CA | XSEL-P | XSEL-Q | XSEL-R | XSEL-S* DD Direct Drive Motor Series Catalog (version 2A)
* Additional Model list
The Direct Drive Motor is a rotary actuator that directly drives a rotary table with a motor without using any speed reducing mechanism. Eliminating the speed reducing mechanism explains why high speed and excellent response can be achieved with such a compact frame. Index Absolute Type or Multi-rotation Absolute Type Can be Selected.
Learn More2ndCJ0199-2A-UST-1-0814122014-08
Single-Axis RotaryStandard
RS-I-30 | RS-A-30 | RS-I-60 | RS-A-60
Applicable controllers: XSEL-P (6 axes) | XSEL-Q (6 axes) | XSEL-J (4 axes) | XSEL-K (4 axes) | SSEL (2 axes) | SCON (1 axis)RS Rotary System Series Catalog
The RS series rotary actuator is compact, powerful and lightweight. Small size (RS-30) and Medium size (RS-30) are available for your particular application.
(Compact, Mini, Small Size)1stRS-3A-UST-1-021362013-02
Single-Axis Linear Servo ActuatorStandard
Applicable controllers: XSEL-P (6 axes) | XSEL-Q (6 axes) | SSEL (2 axes)LSAS-N10/N15 Linear Servo Actuator Quasi-Absolute Type Catalog
Introducing a new type of absolute linear servo actuator requiring no battery — The Quasi-Absolute Encoder is a new encoder offering the advantages of both incremental and absolute encoders.
* High-precision. The positioning repeatability is up to ±5µm.1stCJ0174-1A-UST-1-0111162011-01
Single-Axis Linear Servo ActuatorStandard
LSA-N10SS | LSA-N10SM
Applicable controllers: XSEL-P (6 axes) | XSEL-Q (6 axes) | SSEL (2 axes) | SCON (1 axis)LSA-N10 Mid-Size Linear Servo Actuators Catalog
The New LSA-N10 medium sized linear servo actuator features high performance 3G acceleration, max speed of 2,500mm/s and thrusts of up to 162N. Available in strokes up to 4,100mm.
* High-precision. The positioning repeatability is up to ±5µm.1stCJ0141-1A-UST-1-040942009-04
Single-Axis Linear Servo ActuatorStandard
Applicable controllers: XSEL-P (6 axes) | XSEL-Q (6 axes) | SSEL (2 axes) | SCON (1 axis)LSA Linear Servo Actuator Series Catalog
Replacing the ball screw with no-friction magnets, the LSA series delivers exceptional repeatability at ultra-high speeds. To dramatically reduce cycle time, the LSA can accelerate or decelerate much faster (3G) than advanced ball screw actuators.
* High-precision. The positioning repeatability is up to ±5µm.3rdCJ0094-3A-UST-2-1108682008-11
Cartesian 6-Axis RobotStandard
CRS-XBA-1-WA (24V stepper motor) |
CRS-XBA-3-WA (24V stepper motor) |
Controller: RSEL-SXBA (for CRS)
Applicable controllers: Contact IAI. The controller for this system needs to be purchased/prepared separately. XSEL-P (6 axes) | XSEL-Q (6 axes) | XSEL-RA | XSEL-SA | SSEL (2 axes) | SCON (1 axis)ICSB/ICSPB Cartesian Catalog
ICS(P)B Cartesian configuration type with battery-less absolute encoder equipped as standard.
- Home return and home sensor not necessary.
- Removal of current work-pieces is not necessary even in emergency stop.
From 2-axis to 6-axis specifications and small to large models.
Learn More1stCE0247-1A (0417)3702017-04
Cartesian Multi-axisStandard
CT4-G1RT | CT4-G1PR | CT4-G1
Applicable controllers: XSEL-PCT (6 axes) | XSEL-QCT (6 axes)CT4 High-speed Cartesian Robot Catalog
Higher rigidity, more efficient operation range, and greater high-speed performance can be achieved than standard parallel-linked robots!
Learn More
Note: The CT4 Series has been moved to the Obsolete Products Archive.
Notice of Discontinuation for CT4 Series - March 20213rdCJ0194-3A-UST-1-0115202015-01
Cartesian Multi-axisStandard
IK2-PXBD1 | IK2-PXBD2 | IK2-PXBC1 | IK2-PXBC2 | IK2-PXBB1 | IK2-PXBB2 | IK2-PXZB1 | IK2-PYBB1 | IK2-SXBD1 | IK2-SXBD2 | IK2-SXBC1 | IK2-SXBC2 | IK2-SXBB1 | IK2-SXBB2 | IK2-SXBA1 | IK2-SXBA2 | IK2-SXZB1 | IK2-SYBB1 | IK3-PBBG1 | IK3-SBBG1
Applicable controllers: Please contact IAI. The controller for this system needs to be purchased/prepared separately. PSEL-C | SSEL-C | RPCON | RACON | XSEL-J | XSEL-K | XSEL-P | XSEL-Q
NOTE: PSEL, ASEL, SSEL controllers updated to PSEL-CS, ASEL-CS, & SSEL-CS controllers.IK Series Multi-Axes Systems Catalog
The extensive lineup of the IK Series offers many multi-axes variations and can be easily integrated and prepared to your specific needs. The IK Series includes everything needed for fast and easy assembly.2ndCJ0120-2A-UST-3-10121402012-10
Cartesian Multi-axisStandard
Applicable controllers: SCON | SSEL-C | XSEL-P | XSEL-QNS-ISA / LSA-ISA Multi-Slider Type Cartesian System Catalog
Multi-slider Type Cartesian robots both in the NS and LSA Linear Servo. Available in 2 to 6 axes, the high performance actuators will enable operations requiring long stroke and high acceleration / deceleration.2ndCJ0019-2A-UST-4-0310722010-03
TableTop RobotStandard
TTA-A2SLG | TTA-A2SHG | TTA-A2G | TTA-A3SLG | TTA-A3SHG | TTA-A3G | TTA-A4SLG | TTA-A4SHG | TTA-A4G | TTA-C2SLG | TTA-C2SHG | TTA-C2G | TTA-C3SLG | TTA-C3SHG | TTA-C3G | TTA-C4SLG | TTA-C4SHG | TTA-C4GTTA Series Tabletop Robot Catalog
All models are equipped with battery-less absolute encoder as standard. A new high-precision AC servo motor series has been added. A new PC software SEL Program Generator automatically generates a SEL program and positioning data simply by drawing the operation path on the screen.
Learn More4thCE0206-4A-0716642016-10
TableTop RobotStandard
TT-A2-I-2020 | TT-A2-I-4040 | TT-A3-I-2020 | TT-A3-I-4040 | TT-C2-I-2020 | TT-C2-I-4040 | TT-C3-I-2020 | TT-C3-I-4040TT Series Tabletop Robot Catalog
Compact, easy to use, high-performance tabletop robots are available at amazingly low prices. The TT employs a rigid base, ball screw and servo control motor for precision and eliminating missteps.1stCJ0082-1A-UST-3-0612242012-06
SCARA RobotStandard
* Max. arm length: 1200mm
* Max. Payload: 47kg
* Standard Cycle Time 0.30 seconds (when transporting 2kg, Horizontal movement 300mm, Vertical movement 25mm)
IXA Series (SCARA robot) Lineup Flyer
A handy chart that conveniently lists all IXA SCARA models and specifications.
Applicable controller: XSEL-RAX4 (for IXA) | XSEL-SAX4 (for IXA)IXA-4NSC Cleanroom Specification SCARA Robot Catalog
For assembling and handling applications in a clean environment.
* ISO Class 3 compliant
* Fastest in the industry!
* Standard Cycle Time 0.28 seconds (when transporting 2kg, Horizontal movement 300mm, Vertical movement 25mm)1stCE0291-1A (2022JAN)
IXA Series Lineup
IXALineupChart (2022NOV)
282022-01
SCARA RobotStandard
Dust-proof
Splash-proof
High Payload type: IXA-4NHN10040 | IXA-4NHN12040
Applicable controller: XSEL-SAX
Standard Type: IXA-3NNN1805 | IXA-4NNN1805 | IXA-3NNN3015 | IXA-4NNN3015 | IXA-3NNN4518 | IXA-4NNN4518 | IXA-3NNN4533 | IXA-4NNN4533 | IXA-3NNN6018 | IXA-4NNN6018 | IXA-3NNN6033 | IXA-4NNN6033 |
NEW IXA-4NNN8020 | NEW IXA-4NNN8040 | NEW IXA-4NNN10020 | NEW IXA-4NNN10040
High-speed Type: IXA-3NSN3015 | IXA-4NSN3015 | IXA-3NSN4518 | IXA-4NSN4518 | IXA-3NSN4533 | IXA-4NSN4533 | IXA-3NSN6018 | IXA-4NSN6018 | IXA-3NSN6033 | IXA-4NSN6033 |
NEW IXA-4NSN8020 | NEW IXA-4NSN8040 | NEW IXA-4NSN10020 | NEW IXA-4NSN10040
Dust / Splash-proof, High-speed Type: IXA-4NSW3015 | IXA-4NSW4518 | IXA-4NSW4533 | IXA-4NSW6018 | IXA-4NSW6033
Applicable controllers: XSEL-RAX | XSEL-SAX | XSEL-RAX3 (for IXA) | XSEL-SAX3 (for IXA) | XSEL-RAX4 (for IX and IXA) | XSEL-SAX4 (for IX and IXA)Download two of the IXA SCARA Robot Series.
Includes both IXA Main catalog and IXA High Payload catalog in one set.
IXA High-speed SCARA Robot Series Catalog
* Fastest in the Industry
* Achieves Lower Price
* Low Vibration, Accurate Positioning
* Equipped with a Battery-less Absolute Encoder as standard
* Dust / Splash-proof Specification Suitable for Environment
* Compliance Control and Collision Detection Function
IXA High Payload SCARA Robot Series Catalog
* Maximum Payload 50kg
* Arm Length 1,200mm
* Verticle Stroke 400mm
* Standard Cycle Time 0.61 seconds
* Collision Detection function
* Battery-less Absolute Encoder as standardCE0287-1A (2021OCT)
and
CE0256-4A (2021APR)
IXA Series Lineup
IXALineupChart (2022NOV)
2021-10
SCARA RobotStandard
High Payload type: IXA-4NHN10040 | IXA-4NHN12040
Applicable controller: XSEL-SAX
IXA High Payload SCARA Robot Catalog
Introducing the New High Payload IXA Series SCARA Robot.
* Maximum Payload 50kg
* Arm Length 1,200mm
* Verticle Stroke 400mm
* Standard Cycle Time 0.61 seconds
* Collision Detection function
* Battery-less Absolute Encoder as standard1stCE0287-1A (2021OCT)
IXA Series Lineup
IXALineupChart (2022NOV)
242021-10
SCARA RobotStandard
Dust-proof
Splash-proof
Standard Type: IXA-3NNN1805 | IXA-4NNN1805 | IXA-3NNN3015 | IXA-4NNN3015 | IXA-3NNN4518 | IXA-4NNN4518 | IXA-3NNN4533 | IXA-4NNN4533 | IXA-3NNN6018 | IXA-4NNN6018 | IXA-3NNN6033 | IXA-4NNN6033 |
NEW IXA-4NNN8020 | NEW IXA-4NNN8040 | NEW IXA-4NNN10020 | NEW IXA-4NNN10040
High-speed Type: IXA-3NSN3015 | IXA-4NSN3015 | IXA-3NSN4518 | IXA-4NSN4518 | IXA-3NSN4533 | IXA-4NSN4533 | IXA-3NSN6018 | IXA-4NSN6018 | IXA-3NSN6033 | IXA-4NSN6033 |
NEW IXA-4NSN8020 | NEW IXA-4NSN8040 | NEW IXA-4NSN10020 | NEW IXA-4NSN10040
Applicable controllers: XSEL-RAX | XSEL-SAX | XSEL-RAX3 (for IXA) | XSEL-SAX3 (for IXA) | XSEL-RAX4 (for IX and IXA) | XSEL-SAX4 (for IX and IXA)IXA SCARA Robot Catalog
Introducing the New High-speed IXA Series SCARA Robot.
New Models Added!
* Fastest in the Industry
* Achieves Lower Price
* Low Vibration, Accurate Positioning
* Equipped with a Battery-less Absolute Encoder as standard
* Dust / Splash-proof Specification Suitable for Environment
* Compliance Control and Collision Detection Function
Applicable controllers: MSEL-PCX3 | MSEL-PGX3 | MSEL-PCX4 | MSEL-PGX4IXP Series PowerCON SCARA Catalog
Cleanroom specification and Dust/Splash-proof specification added in cost-effective IXP Series giving more Variations to the Line up. All models come standard with battery-less absolute encoders.
Learn More5thCE0219-5A (1217)422018-01
SCARA RobotStandard
IX-NNN10040 | IX-NNN12040
Applicable controller: XSEL-SX4IX-1000/1200 Super-Large SCARA Robot Catalog
The super-large SCARA series boasting an arm length of 1200 mm and payload of 50 kg, both of which are the largest among all our SCARA robots.1stCJ0198-1A-UST-1-031382013-03
SCARA RobotStandard
Applicable controllers: XSEL-PX | XSEL-QXIX High-Speed SCARA Robot Catalog
The new IX High-speed SCARA has been improved to achieve higher speeds and reduced cycle times. The easy to program SCARA is offered in a wide variety of sizes and mounting options.1stCJ0150-1A-UST-1-1109482009-09
SCARA RobotStandard
ZR-S | ZR-M | ICSA4-BB | ICSPA4-BB | ICSA4-BE | ICSPA4-BE
Applicable controllers: XSEL-P | XSEL-QZR-S / M High Speed Vertical/ Rotation Axis Unit Catalog
The ZR Unit offers high-speed vertical and rotation motion; the perfect addition to a 2-axis system. Available in two sizes to suit your application.1stZR-UST-1-0309112009-03
SCARA RobotStandard
Applicable controllers: XSEL-PX | XSEL-QXIX-NNN / NNC Ultra Compact / Cleanroom SCARA Robot Catalog
A palm-sized unit capable of driving a maximum payload of 1kg. New models of 180-mm arm length and cleanroom specification were added to the lineup, further extending the utility and applications of the IX-NNN / NNC series.1stCJ0096-1A (May 2006)122006-05
Controller
Gateway units (Positioner type):
(For situations where the stop position will be registered in the position data, and then the position number will be specified for operation.)
RCON-GWG-CC (CC-Link)
RCON-GWG-CIE (CC-Link IE Field)
RCON-GWG-DV (DeviceNet)
RCON-GWG-EC (EtherCAT)
RCON-GWG-EP (EtherNet/IP)
RCON-GWG-ECM (EtherCAT motion)
RCON-GWG-PR (PROFIBUS-DP)
RCON-GWG-PRT (PROFINET IO)
RCON-GWG-ML3 (MECHATROLINK III)
RCON-GWG-SSN (SDCNET III/H)
Program type:
(For situations where Cartesian coordinate system operation is performed for multiple axes combining single axes.)
RSEL-G-E
RSEL-G-NP (NPN PIO specification)
RSEL-G-PN (PNP PIO specification
RSEL-G-CC (CC-Link)
RSEL-G-CC2 (CC-Link)(bifurcated connector supplied)
RSEL-G-CIE (CC-Link IE Field)
RSEL-G-DV (DeviceNet)
RSEL-G-DV2 (DeviceNet)(bifurcated connector supplied)
RSEL-G-EC (EtherCAT)
RSEL-G-EP (EtherNet/IP)
RSEL-G-PR (PROFIBUS-DP)
RSEL-G-PRT (PROFINET IO)
ELECYLINDER Unit:
(For situations where ELECYLINDER with ACR option is operated over a fieldbus.)
REC-GW-CC (CC-Link)
REC-GW-CIE (CC-Link IE Field)
REC-GW-DV (DeviceNet)
REC-GW-EC (EtherCAT)
REC-GW-EP (EtherNet/IP)
REC-GW-PR (PROFIBUS-DP)
REC-GW-PRT (PROFINET IO)R-Unit Catalog
This series of unit-connecting controllers allows you to freely select and combine connected actuators and control methods.
- Unit-connecting controllers support a wide array of combinations! This allows for mixed control of actuators with both a 24V motor and 200V motor.
- You can use the same driver units if you want to switch the master unit based on the control method.
- Saves space inside the control panel. RCON can control driver units for up to 16 axes of actuators with a single gateway.2ndCE0272-2.15A (2022MAR)922022-03
Controller
Driver units:
RCON-PC-1 (Stepper motor 1-axis)
RCON-PC-2 (Stepper motor 2-axis)
RCON-PCF-1 (High thrust stepper motor 1-axis)
RCON-PCF-1 (High thrust stepper motor 2-axis)
RCON-AC-1 (AC servo motor 1-axis)
RCON-AC-2 (AC servo motor 2-axis)
RCON-DC-1 (DC brush-less motor 1-axis)
RCON-DC-2 (DC brush-less motor 2-axis)
Expansion unit: RCON-EXT
Simple absolute unit:
RCON-ABU-P (Stepper motor)
RCON-ABU-A (AC servo motor)RCON Catalog
RCON is recommended for actuators with two axes or more.
Save up to 85% of control panel space.
- Up to 16 axes of actuators can be connected
- Can be connected to various field networks.
- Predictive maintenance/preventative maintenance function
Learn More
1stCE0264-1A (0619)402019-06
ControllerPCON-CYB | PCON-PLB | PCON-POB | ACON-CYB | ACON-PLB | ACON-POB | DCON-CYB | DCON-PLB | DCON-POBPCON ACON DCON CYB/PLB/POB?
Compact controller that can be connected to the battery-less absolute encoder. Equipped with useful functions for a low price.
* For product with battery-less absolute encoder
* Power CON type
* Equipped with Smart tuning function enhanced monitor function
* Preventative maintenance1stCE0240-1A (1217)222018-01
Teach Pendant
TB-03E | TB-02ETB-03E/TB-02E ELECYLINDER® teaching pendant with dedicated power supply unit?
Trial operation and data setting of an ELECYLINDER® prior to system electric wiring are possible since the teaching pendant has its own power supply unit!
* Wireless connection enables configuration and trial operation even in places out of reach.
* Monitor the operating status for up to 16 axes while receiving wireless data from the ELECYLINDER®.1stCE0275-1A (2020DEC)122020-12
Teach Pendant
TB-03TB-03 Touch Panel Teaching Pendant Catalog with Wireless Data Setting Function for ELECYLINDER® ?
Less wiring, simple and swift with wireless connection.
* Status monitoring makes daily maintenance easier and shortens trouble recovery time
* Supports position/program controller
Learn More1stCE0254-1A (1117)42017-11
Teach Pendant
TB-02TB-02 Touch Panel Teaching Pendant Catalog
With the 7-inch touch panel equipped, it is easier to see, and with new functions equipped, it is easier to use. Anyone can operate with ease.
Learn More2ndCE0239-2A-061682016-06
Teach PendantTB-01TB-01 Teaching Pendant Catalog
Your controllers can be operated with one unit. The TB-01 supports both programmable controllers and position controllers.1stCJ0208-1A-UST-5-081442014-08
Controller
SCON-LC | SCON-LCG??SCON-LC/LCG Position controller with PLC function Catalog?
Capable of operating actuators by a ladder program and ON/OFF control of I/O (input and output) signals. In addition, the LC-LADDER editing software can be used to easily create, monitor and debug a ladder program.
Learn More1stCE0244-1A (1216)162016-12
Controller
XSEL-RA | XSEL-SAXSEL-RA/SA Program Controller Catalog
This controller can operate up to 40 axes. Greater capacity as compared with the conventional XSEL controller.1stCE0243-1A (0916)202016-10
Controller
MCON-C | MCON-CGMCON position controller for ROBO Cylinder® Catalog
One unit can control the stepper motor, AC servo motor, and brush-less DC motor. 8-axis controller that achieves high functionality in a small size.1stCE0233-1A-0916202016-10
Controller
EIOU-1Remote I/O Unit for SEL Related Controllers Catalog
Allows you to easily expand the number of I/O points on the controller. The small product size allows easy installation using DIN rail mounts.
Learn More1stCE0228-1A (1115)82015-11
Controller
LC-LADDERLadder Programming Software for MSEP-LC: LC-LADDER Catalog
The MSEP-LC's DFC command makes programming simple, providing static allocation of internal memory and timing-free command sending.
Learn More1stCJ0214-1A-UST-1-111482014-11
Controller
MSEL-PC | MSEL-PGMSEL-PC/PG Program Controller for ROBO Cylinder® Catalog
For RCP5 / RCP4 / RCP3 / RCP2. Control a maximum of 4 axes available with pulse motor mounted ROBO Cylinder. Also available for interpolation operation.
Learn More1stCJ0222-1A-UST-1-1214122014-12
Controller
SCON-CAL | SCON-CGALSCON-CAL: Position Controller for Single-axis Robots / Cartesian Robots / ROBO Cylinder® RCS2/RCS3 Catalog
The SCON-CAL measures only 49 mm wide, 158 mm high and 116 mm deep, making it substantially smaller than the SCON-CA. Multiple SCON-CALs can be installed without leaving any space in between.
Learn More1stCJ0221-1A-UST-1-1214162014-12
Controller
MSEP-C | MSEP-LCMSEP-C / LC Position Controller for ROBO Cylinder® Catalog
Operating the actuator and controlling the ON/OFF of I/O signals using a ladder logic program is now possible.
Learn More2ndCJ0216-2A-UST-1-0215282015-02
Controller
ACON-CA | DCON-CAACON-CA / DCON-CA Positioner Controllers for RCA/ RCA2/ RCL/ RCD Catalog
The offboard tuning function lets you set an optimal gain for the load. With the DCON-CA, the Micro cylinder can handle multi-point positioning of 512 positions.
Learn More1stCJ0211-1A-UST-2-0914122014-09
Controller
MSCON-CMSCON ROBO Cylinder® Position Controller 6-axis Type Catalog
- Space-saving, low-cost, and easy to use
- Movement by numerical specification via Field network
- Offboard tuning function to enhance actuator payload capacity
- Vibration control function for shorter cycle time1stCJ0193-1A-UST-1-0313122013-03
ControllerXSEL-R | XSEL-SXSEL-R/S Program Controller XSEL Series 8-axis Specification Catalog
- Capable of operating up to 8 axes
- DeviceNet master function (RC Gateway function)
- Supports EtherCAT and EtherNet/IP1stCJ0197-1A-USA-1-031382013-03
Controller
PCON-CA | PCON-CFA
Notice for Discontinuation of PCON-CA/CFA - October 2021PCON-CA/ CFA Field Network Controllers Catalog
- DeviceNet, CC-Link, PROFIBUS-DP, CompoNet, MECHATROLINK (I, II), EtherCAT and EtherNet/IP are supported
- Key features include wire-saving, position number specification, and current position read
- PCON-CFA is for High-thrust Motors2ndCJ0192-2A-UST-1-121242012-12
Controller
MSEP-CMSEP Position Controller for ROBO Cylinder® 8-axes Catalog
- Compact Design
- Supports major field networks
- Supports both the pulse motor and the servo motor
- Absolute position encoder is available1stCJ0187-1A-UST-1-0712162012-07
Controller
SCON-CASCON-CA Single-axis/ Linear Servo Actuator Position Controller for RCS2/RCS3 Catalog
- Offboard tuning to increase the actuator's load capacity
- Supports major field networks
- Vibration control function that shortens cycle time
- Force control function for accurate push-motion1stCJ0173-1A-UST-1-0312162012-03
ControllerPCON-C | PCON-CG | ACON-C | ACON-CGPCON-C/CG ACON-C/CG EtherNet/IP Field Network Controllers Flyer
PCON / ACONs are now available in EtherNet/IP-ready versions. International Standard Network allows high-speed communication with its peripheral devices.1stCJ0179-1A-UST-1-101122011-10
ControllerPCON-C | PCON-CG | ACON-C | ACON-CGPCON-C/CG ACON-C/CG EtherCAT Field Network Controllers Flyer
High-speed communication to eliminate the bottlenecks of networks. PCON/ACONs are now available in EtherCAT-ready versions.1stCJ0176-1A-UST-1-031122011-03
Controller
XSEL-P | XSEL-QX-SEL Controller Vision System Interface Function Flyer
You can use high-functional vision systems from specialized manufacturers, such as Omron, Keyence and Cognex. Camera can capture up to 5 mega pixels.1stCJ0171-1A-UST-1-011122011-01
Controller
XSEL-P | XSEL-QXSEL-P/Q Electronic Cam Function Controller Option Catalog
The controller recreates the movements of mechanical cams! An electronic cam controls the slave axis in synchronization with the master axis, using pulse trains, according to a pre-defined electronic cam table.1stCJ0152-1A-UST-1-101042010-10
Controller
XSEL-PX4 | XSEL-PX5 | XSEL-PX6 | XSEL-QX4 | XSEL-QX5 | XSEL-QX6XSEL-PX/QX Large Capacity SCARA Controller Catalog
A large-capacity SCARA controller capable of controlling up to six axes. The X-SEL PX/QX can control SCARA robots plus up to two axes in a combination of single-axis and/or cartesian robots. Conveyor tracking function is also possible.1stCJ0091-Mar.0106-142006-03
Controller
PMEC-C | AMEC-CPMEC / AMEC 3 Position Controller for ROBO Cylinder® Catalog
The new revolutionary MEC controller is designed with easy operation in mind. Get setup and running in record time with the intuitive user panel of the MEC controller.
Acceleration and speed can easily be adjusted by a turn of the knob.
Note: The PMEC / AMEC Controller has been moved to the Obsolete Products Archive.
Notice of Discontinuation for PMEC/AMEC-C, PSEP/ASEP/DSEP-C controllers - October 20201stCJ0153-1B-UST-0510322010-05
Teach PendantCON-PT-M-ENG | CON-PD-M-ENG | CON-PG-M-S-ENGCON-PT ROBO Cylinder® Teaching Pendant Catalog
The CON-PT touch panel teaching pendant allows for easy configuration and use even for the first time user. The display is able to show all the position information on one screen, making editing position data easy.1stCONPT-UST-1A-021042010-02
Teach PendantCON-T | CON-TG-S | SEL-T | SEL-T-J | SEL-TD | SEL-TD-J | SEL-TGCON-TG / SEL-TG Safety Category 4 Compatible Teaching Pendant Catalog
The TP adapter accessory makes it possible to add an external safety circuit so that controllers that were not safety category compatible in the past can be made compatible with, at most, Safety Category Class 4.
Note: The CON-TG / SEL-TG Series has been moved to the Obsolete Products Archive.
Notice of Discontinuation for CON-T/TG/TGS and SEL-T/TD/TG Teaching Box - October 20201stCJ0135-1A-UST-1-120842008-12
Controller
PSEL-C | PCON-ABU
NOTE: PSEL, ASEL, SSEL controllers updated to PSEL-CS, ASEL-CS, & SSEL-CS controllers.PSEL-C-ABU Program Controllers that support Simple Absolute Flyer
- The simple absolute eliminates the need for a home return. The unit works immediately when connected to a power source.
- The controller can interpolate 2 axes. The proprietary SEL language enables easy programming of difficult operations.
- Encoder data can be saved for a maximum of 20 days.1stCJ0142-1A-UST-1-060922009-06
ControllerPCON-C | PCON-CG | ACON-C | ACON-CG | SCON-C | PSEL-C | ASEL-C | SSEL-C | XSEL
NOTE: PSEL, ASEL, SSEL controllers updated to PSEL-CS, ASEL-CS, & SSEL-CS controllers.Field Network Controllers Catalog
The controller an be connected directly to major networks, DeviceNet, CC-Link, ProfiBus, Ethernet. The ROBONET, PCON and ACON controllers can operate actuators based on direct specification of target positions as numerical values.1stCJ0133-1A-UST-1-090842008-09
Teach PendantCON-TCON-T Teaching Pendant for Positioner Controllers Flyer
Dedicated keys have been set to significantly improve the ease of certain operations that had to be done by switching screens on previous models. The new CON-T teaching pendants comply with the CE/UL Standards, which means that you can use them overseas without problem.
Note: The CON-TG / SEL-TG Series has been moved to the Obsolete Products Archive.
Notice of Discontinuation for CON-T/TG/TGS and SEL-T/TD/TG Teaching Box - October 20201stCJ0112-1A22008-06
ControllerREXT-SIO | REXT-CTLRoboNet REXT (Extension Unit) Flyer
The units enable the reduction of horizontal width by using cross-over cabling with ROBONET, making smaller control panels possible.1stCJ0118-1A22008-06
ControllerPCON-CF-86PPCON-CF: Controller for RCP2 High-Output Motor Actuators Flyer
This model is a positioner type that can execute up to 512 positioning points. Tje I/O signal pin assignments can be changed for each function, from an available 6 or more pin patterns.1stCJ0111-1A22007-05
ControllerACON-ABU | PCON-ABUACON-ABU / PCON-ABU Simple Absolute Units Flyer
By simply connecting to the ACON / PCON controller, the RCA / RCP2 actuator is changed to the basic absolute specifications.1stCJ0110-1A22007-04
Teach PendantSEL-T | SEL-TD | SEL-T-J | SEL-TD-JSEL-T/TD SEL Controller Teaching Box Flyer
SEL-TD is equipped with a 3-position enable switch compatible with ANSI robot standard. In addition, the emergency stop switch is able to respond to safety category class 4 by making circuits redundant.1stCJ0113-1A (May 2007)22007-05
ControllerRGW-DV | RGW-CC | RGW-PR | RGW-SIO | RACON | RPCON | RABUROBONET Network Controller Catalog
RoboNet is a new type of controller unit that can freely operate robot cylinders via a field network. Reduce the time and effort of wiring installation compared to conventional controllers by reducing wiring, making the controller smaller, and using DIN rail installation.2ndCJ0109-2A (June 2007)122007-06
ControllerXSEL-J | XSEL-K | XSEL-KE | XSEL-KT | XSEL-P | XSEL-Q | XSEL-JX | XSEL-KX | XSEL-PX | XSEL-QXX-SEL High-Function Multi-Axes Controller Catalog
You can operate your single-axis/cartesian robot according to the preferred control method. The X-SEL controllers support representative field networks such as DeviceNet, CC-Link, ProfiBus and Ethernet.3rdXSEL-UST-3-0609362009-06
Circuit Breakers (CB) hoạt động thế nào?
Bộ ngắt điện hay còn gọi là máy cắt (Circuit breaker-CB) là thiết bị được thiết kế để bảo vệ một mạch điện khỏi bị hư hỏng gây ra bởi dòng điện
Programmable logic controller
A programmable logic controller (PLC), or programmable controller is an industrial digital computer which has been ruggedisedand adapted for the control of
Sensors In Agriculture (Comming soon)Sensors In Agriculture. Soil moisture sensors, Agricultural temperature sensors, GPS sensors, Weather sensors, Crop health sensors, Electronic sensors, Light
10 Dự báo về Internet Of Things (IoT) năm 2018Trong một báo cáo mới, dự đoán năm 2018: IoT chuyển từ thử nghiệm sang kinh doanh quy mô, Forrester Research dự đoán rằng IoT sẽ trở thành xương sống của
Năng lượng tương lai: Photovoltaic hay Hydrogen?Hydrogen là một nguyên tố chiếm tỷ lệ cao nhất so với tất cả các nguyên tố khác trên địa cầu. Nhưng hydrogen không hiện diện dưới dạng nguyên tử hay
Chất thải từ người là năng lượng tương lai?BBC Future - Hành tinh của chúng ta gặp một vấn đề. Con người, như tất cả các sinh vật sống khác, thải ra rất nhiều những chất thải không dễ chịu