Cảm biến nhiệt độ | Temperature sensors

Temperature sensors THTE-, Dòng cảm biến nhiệt độ của Sick -Hợp vệ sinh và linh hoạt nhờ ống bảo vệ

Hợp vệ sinh và linh hoạt: Cảm biến nhiệt độ với ống bảo vệ/ Hygienic and flexible: Temperature sensor with protection tube
- Pt100, cấp chính xác A (IEC 60751)/ Pt100, accuracy class A (IEC 60751)
- Dải đo –50 °C ... +150 °C và –50 °C ... +250 °C/ Measuring ranges –50 °C ... +150 °C and –50 °C ... +250 °C
- Đầu dò cảm biến được nạp vào lò xo trong ống bảo vệ/ Sensor probe spring-loaded in protective pipe
- Các bộ phận được làm ướt: thép không gỉ chống ăn mòn 316L / 1.4435, Ra ≤ 0.8 µm/  Wetted parts: corrosion-resistant stainless steel 316L/1.4435, Ra ≤ 0.8 µm
- Kết nối quy trình hợp vệ sinh/ Hygienic process connections
- Pt100 (4 dây dẫn) hoặc 4 mA ... 20 mA (2 dây dẫn)/ Pt100 (4-conductor) or 4 mA ... 20 mA (2-conductor)
- Đầu nối tròn M12 x 1/ M12 round connector x 1
Temperature sensors THTE-, Dòng cảm biến nhiệt độ của Sick -Hợp vệ sinh và linh hoạt nhờ ống bảo vệ

Ưu điểm/ Your Benefits

- Cảm biến có thể được trao đổi mà không cần mở quy trình, mang lại tính sẵn sàng thiết bị cao và giảm thiểu rủi ro vệ sinh/ The sensor can be exchanged without opening the process, providing high equipment availability and minimizing hygienic risks
- Hoạt động vệ sinh an toàn: Các bộ phận được làm ướt được làm từ thép không gỉ cao cấp, bề mặt hoàn thiện được phân loại hợp vệ sinh và thiết kế không có khe hở và kẽ hở/ Safe hygienic operation: Wetted parts are made from high-grade stainless steel, hygienically-graded surface finish, and a gap- and crevice-free design
- Chắc chắn: Vỏ kết nối dễ lau chùi và chống nước văng/ Rugged: Connection housing is easy to clean and splash water proof
- Cài đặt nhanh chóng và an toàn/ Quick and safe installation
- Độ ổn định lâu dài, độ chính xác và tuyến tính rất tốt/ Very good long-term stability, accuracy and linearity
- Thời gian phản hồi nhanh chóng/ Quick response time
- Các giải pháp tối ưu cho các yêu cầu cá nhân do khả năng cấu hình linh hoạt/ Optimal solutions for individual requirements due to versatile configurability
 

Overview

Hygienic and flexible: Temperature sensor with protection tube
Cảm biến nhiệt độ THTE là một nhiệt kế điện trở Pt100 được phân loại hợp vệ sinh cho các ứng dụng trong ngành thực phẩm và đồ uống, dược phẩm, mỹ phẩm và công nghệ sinh học. Với sự trợ giúp của một tế bào nhiệt nhô ra trong quá trình này, cảm biến có thể được trao đổi "khô". Điều đó có nghĩa là tàu vẫn đóng và các rủi ro vệ sinh tiềm ẩn được giảm thiểu. Thermowell có sẵn với nhiều chiều dài chèn và được lắp đặt tại bình bằng các kết nối quy trình thông thường được phân loại hợp vệ sinh. Thép không gỉ cao cấp và thiết kế không có khe hở và kẽ hở cho phép chế biến an toàn và sạch sẽ. THTE rất thích hợp cho các quy trình CIP và SIP. Điều này cho phép vận hành hợp vệ sinh an toàn kết hợp với tính sẵn có của thiết bị được tối ưu hóa./ The THTE temperature sensor is a hygienically-graded Pt100 resistance thermometer for applications in the food and beverage, pharmaceutical, cosmetics, and biotechnology industries. With the help of a thermowell that protrudes into the process, the sensor can be exchanged “dry“. That means that the vessel remains closed and potential hygienic risks are minimized. The thermowell is available in multiple insertion lengths and is installed at the vessel by common hygienically-graded process connections. High-grade stainless steel and a gap- and crevice-free design enable safe and clean processing. The THTE is well suited for CIP and SIP processes. This enables safe hygienic operation in conjunction with optimized equipment availability.

Bên cạnh kết nối điện trực tiếp với phần tử Pt100, THTE còn có sẵn một máy phát tích hợp với tín hiệu đầu ra 4 mA ... 20 mA./ Besides its direct electrical connection to the Pt100 element, the THTE is available with an integrated transmitter with 4 mA ... 20 mA output signal.

At a glance
- Pt100, cấp chính xác A (IEC 60751)/ Pt100, accuracy class A (IEC 60751)
- Dải đo –50 °C ... +150 °C và –50 °C ... +250 °C/ Measuring ranges –50 °C ... +150 °C and –50 °C ... +250 °C
- Đầu dò cảm biến được nạp vào lò xo trong ống bảo vệ/ Sensor probe spring-loaded in protective pipe
- Các bộ phận được làm ướt: thép không gỉ chống ăn mòn 316L / 1.4435, Ra ≤ 0.8 µm/  Wetted parts: corrosion-resistant stainless steel 316L/1.4435, Ra ≤ 0.8 µm
- Kết nối quy trình hợp vệ sinh/ Hygienic process connections
- Pt100 (4 dây dẫn) hoặc 4 mA ... 20 mA (2 dây dẫn)/ Pt100 (4-conductor) or 4 mA ... 20 mA (2-conductor)
- Đầu nối tròn M12 x 1/ M12 round connector x 1
 

Ứng dụng/ Applications

Lĩnh vực ứng dụng/ Fields of applications
- Đo nhiệt độ vệ sinh trong bình và đường ống/ Hygienic temperature measurement in vessels and pipes
- Giám sát và kiểm soát nhiệt độ trong ngành thực phẩm và đồ uống/ Temperature monitoring and control in the food and beverage industry
- Đo nhiệt độ trong ngành mỹ phẩm, dược phẩm và công nghệ sinh học/ Temperature measurement in the cosmetics, pharmaceutical and biotechnology industries

Ứng dụng điển hình / Examples of application
- Đo nhiệt độ trong bể cung cấp cho hệ thống đóng chai/ Measurement of temperature in supply tanks for bottling systems
 

Technical overview

 Technical data overview
Measuring range: –50 °C +150 °C
                             –50 °C +250 °C
Accuracy of sensor element: Class A according to IEC 60751 1)
Accuracy of the opt. measuring transducer: ± 0,25 K
Signal outputs and maximum ohmic load RA: Pt100, 4-wire, 4 mA ... 20 mA, 2-wire (RA ≤ (L+ – 10 V) / 0.023 A [Ohm])
Electrical connection: M12 round connector x 1, 4-pin
1) Class B (measuring range –50 ° C ... –30 ° C).
 

Product Selection

THTE-1PAC30506MZ 
Part no.: 6047749 
Measuring range: –50 °C +150 °C
Accuracy of sensor element: Class A according to IEC 60751
Response time: t50 ≤ 4,7 st90: ≤ 12.2 s
Process connection: Clamp (ISO 2852) DN 25, DN 33.7, DN 38
Insertion length/diameter of probe: 50 mm / 6 mm
Output signal: Pt100, 4-wire
Electrical connection: Round connector M12 x 1, 4-pin, IP 67and IP69
 
THTE-1PAC30256MZ 
Part no.: 6067146 
Measuring range: –50 °C +150 °C
Accuracy of sensor element: Class A according to IEC 60751
Response time: t50 ≤ 4,7 st90: ≤ 12.2 s
Process connection: Clamp (ISO 2852) DN 25, DN 33.7, DN 38
Insertion length/diameter of probe: 25 mm / 6 mm
Output signal: Pt100, 4-wire
Electrical connection: Round connector M12 x 1, 4-pin, IP 67and IP69
 
THTE-1PAT12006MZ 
Part no.: 6047621 
Measuring range: –50 °C +150 °C
Accuracy of sensor element: Class A according to IEC 60751
Response time: t50 ≤ 4,7 st90: ≤ 12.2 s
Process connection: Tri-clamp 1'', 1 ½''
Insertion length/diameter of probe: 200 mm / 6 mm
Output signal: Pt100, 4-wire
Electrical connection: Round connector M12 x 1, 4-pin, IP 67and IP69
 
THTE-1PAT11006MZ 
Part no.: 6047563 
Measuring range: –50 °C +150 °C
Accuracy of sensor element: Class A according to IEC 60751
Response time: t50 ≤ 4,7 st90: ≤ 12.2 s
Process connection: Tri-clamp 1'', 1 ½''
Insertion length/diameter of probe: 100 mm / 6 mm
Output signal: Pt100, 4-wire
Electrical connection: Round connector M12 x 1, 4-pin, IP 67and IP69
 
THTE-1PAT11506MZ 
Part no.: 6047620 
Measuring range: –50 °C +150 °C
Accuracy of sensor element: Class A according to IEC 60751
Response time: t50 ≤ 4,7 st90: ≤ 12.2 s
Process connection: Tri-clamp 1'', 1 ½''
Insertion length/diameter of probe: 150 mm / 6 mm
Output signal: Pt100, 4-wire
Electrical connection: Round connector M12 x 1, 4-pin, IP 67and IP69
 
THTE-1PAT10506MZ 
Part no.: 6047616 
Measuring range: –50 °C +150 °C
Accuracy of sensor element: Class A according to IEC 60751
Response time: t50 ≤ 4,7 st90: ≤ 12.2 s
Process connection: Tri-clamp 1'', 1 ½''
Insertion length/diameter of probe: 50 mm / 6 mm
Output signal: Pt100, 4-wire
Electrical connection: Round connector M12 x 1, 4-pin, IP 67and IP69
 
THTE-1PAT10756MZ 
Part no.: 6047618 
Measuring range: –50 °C +150 °C
Accuracy of sensor element: Class A according to IEC 60751
Response time: t50 ≤ 4,7 st90: ≤ 12.2 s
Process connection: Tri-clamp 1'', 1 ½''
Insertion length/diameter of probe: 75 mm / 6 mm
Output signal: Pt100, 4-wire
Electrical connection: Round connector M12 x 1, 4-pin, IP 67and IP69
 
THTE-1AAT11506MZ 
Part no.: 6047633 
Measuring range: –50 °C +150 °C
Accuracy of sensor element: Class A according to IEC 60751
Response time: t50 ≤ 4,7 st90: ≤ 12.2 s
Process connection: Tri-clamp 1'', 1 ½''
Insertion length/diameter of probe: 150 mm / 6 mm
Output signal: 4 mA ... 20 mA, 2-wire (RA ≤ (L+ – 10 V) / 0.023 A [Ohm])
Electrical connection: Round connector M12 x 1, 4-pin, IP 67and IP69
 
THTE-1AAT10756MZ 
Part no.: 6047631 
Measuring range: –50 °C +150 °C
Accuracy of sensor element: Class A according to IEC 60751
Response time: t50 ≤ 4,7 st90: ≤ 12.2 s
Process connection: Tri-clamp 1'', 1 ½''
Insertion length/diameter of probe: 75 mm / 6 mm
Output signal: 4 mA ... 20 mA, 2-wire (RA ≤ (L+ – 10 V) / 0.023 A [Ohm])
Electrical connection: Round connector M12 x 1, 4-pin, IP 67and IP69
 
THTE-1AAT11006MZ 
Part no.: 6047632 
Measuring range: –50 °C +150 °C
Accuracy of sensor element: Class A according to IEC 60751
Response time: t50 ≤ 4,7 st90: ≤ 12.2 s
Process connection: Tri-clamp 1'', 1 ½''
Insertion length/diameter of probe: 100 mm / 6 mm
Output signal: 4 mA ... 20 mA, 2-wire (RA ≤ (L+ – 10 V) / 0.023 A [Ohm])
Electrical connection: Round connector M12 x 1, 4-pin, IP 67and IP69
 
THTE-1AAT10256MZ 
Part no.: 6047629 
Measuring range: –50 °C +150 °C
Accuracy of sensor element: Class A according to IEC 60751
Response time: t50 ≤ 4,7 st90: ≤ 12.2 s
Process connection: Tri-clamp 1'', 1 ½''
Insertion length/diameter of probe: 25 mm / 6 mm
Output signal: 4 mA ... 20 mA, 2-wire (RA ≤ (L+ – 10 V) / 0.023 A [Ohm])
Electrical connection: Round connector M12 x 1, 4-pin, IP 67and IP69
 
THTE-1AAT10506MZ 
Part no.: 6047630 
Measuring range: –50 °C +150 °C
Accuracy of sensor element: Class A according to IEC 60751
Response time: t50 ≤ 4,7 st90: ≤ 12.2 s
Process connection: Tri-clamp 1'', 1 ½''
Insertion length/diameter of probe: 50 mm / 6 mm
Output signal: 4 mA ... 20 mA, 2-wire (RA ≤ (L+ – 10 V) / 0.023 A [Ohm])
Electrical connection: Round connector M12 x 1, 4-pin, IP 67and IP69
 
THTE-1PA540256MZ 
Part no.: 6047622 
Measuring range: –50 °C +150 °C
Accuracy of sensor element: Class A according to IEC 60751
Response time: t50 ≤ 4,7 st90: ≤ 12.2 s
Process connection: Conical coupling (DIN 11851) DN 40 with union nut
Insertion length/diameter of probe: 25 mm / 6 mm
Output signal: Pt100, 4-wire
Electrical connection: Round connector M12 x 1, 4-pin, IP 67and IP69
 
THTE-1PA542006MZ 
Part no.: 6047628 
Measuring range: –50 °C +150 °C
Accuracy of sensor element: Class A according to IEC 60751
Response time: t50 ≤ 4,7 st90: ≤ 12.2 s
Process connection: Conical coupling (DIN 11851) DN 40 with union nut
Insertion length/diameter of probe: 200 mm / 6 mm
Output signal: Pt100, 4-wire
Electrical connection: Round connector M12 x 1, 4-pin, IP 67and IP69
 
THTE-1PA540756MZ 
Part no.: 6047625 
Measuring range: –50 °C +150 °C
Accuracy of sensor element: Class A according to IEC 60751
Response time: t50 ≤ 4,7 st90: ≤ 12.2 s
Process connection: Conical coupling (DIN 11851) DN 40 with union nut
Insertion length/diameter of probe: 75 mm / 6 mm
Output signal: Pt100, 4-wire
Electrical connection: Round connector M12 x 1, 4-pin, IP 67and IP69
 
THTE-1PA540506MZ 
Part no.: 6047623 
Measuring range: –50 °C +150 °C
Accuracy of sensor element: Class A according to IEC 60751
Response time: t50 ≤ 4,7 st90: ≤ 12.2 s
Process connection: Conical coupling (DIN 11851) DN 40 with union nut
Insertion length/diameter of probe: 50 mm / 6 mm
Output signal: Pt100, 4-wire
Electrical connection: Round connector M12 x 1, 4-pin, IP 67and IP69
 
THTE-1PA541006MZ 
Part no.: 6047626 
Measuring range: –50 °C +150 °C
Accuracy of sensor element: Class A according to IEC 60751
Response time: t50 ≤ 4,7 st90: ≤ 12.2 s
Process connection: Conical coupling (DIN 11851) DN 40 with union nut
Insertion length/diameter of probe: 100 mm / 6 mm
Output signal: Pt100, 4-wire
Electrical connection: Round connector M12 x 1, 4-pin, IP 67and IP69
 
THTE-1PA541506MZ 
Part no.: 6047627 
Measuring range: –50 °C +150 °C
Accuracy of sensor element: Class A according to IEC 60751
Response time: t50 ≤ 4,7 st90: ≤ 12.2 s
Process connection: Conical coupling (DIN 11851) DN 40 with union nut
Insertion length/diameter of probe: 150 mm / 6 mm
Output signal: Pt100, 4-wire
Electrical connection: Round connector M12 x 1, 4-pin, IP 67and IP69
 
THTE-1AA542006MZ 
Part no.: 6047641 
Measuring range: –50 °C +150 °C
Accuracy of sensor element: Class A according to IEC 60751
Response time: t50 ≤ 4,7 st90: ≤ 12.2 s
Process connection: Conical coupling (DIN 11851) DN 40 with union nut
Insertion length/diameter of probe: 200 mm / 6 mm
Output signal: 4 mA ... 20 mA, 2-wire (RA ≤ (L+ – 10 V) / 0.023 A [Ohm])
Electrical connection: Round connector M12 x 1, 4-pin, IP 67and IP69
 
THTE-1AA541006MZ 
Part no.: 6047639 
Measuring range: –50 °C +150 °C
Accuracy of sensor element: Class A according to IEC 60751
Response time: t50 ≤ 4,7 st90: ≤ 12.2 s
Process connection: Conical coupling (DIN 11851) DN 40 with union nut
Insertion length/diameter of probe: 100 mm / 6 mm
Output signal: 4 mA ... 20 mA, 2-wire (RA ≤ (L+ – 10 V) / 0.023 A [Ohm])
Electrical connection: Round connector M12 x 1, 4-pin, IP 67and IP69
 
THTE-1AA541506MZ 
Part no.: 6047640 
Measuring range: –50 °C +150 °C
Accuracy of sensor element: Class A according to IEC 60751
Response time: t50 ≤ 4,7 st90: ≤ 12.2 s
Process connection: Conical coupling (DIN 11851) DN 40 with union nut
Insertion length/diameter of probe: 150 mm / 6 mm
Output signal: 4 mA ... 20 mA, 2-wire (RA ≤ (L+ – 10 V) / 0.023 A [Ohm])
Electrical connection: Round connector M12 x 1, 4-pin, IP 67and IP69
 
THTE-1AA540506MZ 
Part no.: 6047636 
Measuring range: –50 °C +150 °C
Accuracy of sensor element: Class A according to IEC 60751
Response time: t50 ≤ 4,7 st90: ≤ 12.2 s
Process connection: Conical coupling (DIN 11851) DN 40 with union nut
Insertion length/diameter of probe: 50 mm / 6 mm
Output signal: 4 mA ... 20 mA, 2-wire (RA ≤ (L+ – 10 V) / 0.023 A [Ohm])
Electrical connection: Round connector M12 x 1, 4-pin, IP 67and IP69
 
THTE-1AA540756MZ 
Part no.: 6047637 
Measuring range: –50 °C +150 °C
Accuracy of sensor element: Class A according to IEC 60751
Response time: t50 ≤ 4,7 st90: ≤ 12.2 s
Process connection: Conical coupling (DIN 11851) DN 40 with union nut
Insertion length/diameter of probe: 75 mm / 6 mm
Output signal: 4 mA ... 20 mA, 2-wire (RA ≤ (L+ – 10 V) / 0.023 A [Ohm])
Electrical connection: Round connector M12 x 1, 4-pin, IP 67and IP69
 
THTE-1AAT12006MZ 
Part no.: 6047634 
Measuring range: –50 °C +150 °C
Accuracy of sensor element: Class A according to IEC 60751
Response time: t50 ≤ 4,7 st90: ≤ 12.2 s
Process connection: Tri-clamp 1'', 1 ½''
Insertion length/diameter of probe: 200 mm / 6 mm
Output signal: 4 mA ... 20 mA, 2-wire (RA ≤ (L+ – 10 V) / 0.023 A [Ohm])
Electrical connection: Round connector M12 x 1, 4-pin, IP 67and IP69
 
THTE-1AA540256MZ 
Part no.: 6047635 
Measuring range: –50 °C +150 °C
Accuracy of sensor element: Class A according to IEC 60751
Response time: t50 ≤ 4,7 st90: ≤ 12.2 s
Process connection: Conical coupling (DIN 11851) DN 40 with union nut
Insertion length/diameter of probe: 25 mm / 6 mm
Output signal: 4 mA ... 20 mA, 2-wire (RA ≤ (L+ – 10 V) / 0.023 A [Ohm])
Electrical connection: Round connector M12 x 1, 4-pin, IP 67and IP69
 
THTE-1PAT10256MZ 
Part no.: 6047615 
Measuring range: –50 °C +150 °C
Accuracy of sensor element: Class A according to IEC 60751
Response time: t50 ≤ 4,7 st90: ≤ 12.2 s
Process connection: Tri-clamp 1'', 1 ½''
Insertion length/diameter of probe: 25 mm / 6 mm
Output signal: Pt100, 4-wire
Electrical connection: Round connector M12 x 1, 4-pin, IP 67and IP69
Gọi điện thoại