Thiết bị chống sét lan truyền đường nguồn T1 + T2 3P (L1, L2, L3, PE, N) - Phoenix Contact - FLT-SEC-T1+T2-3S-350/25-FM - 2905470

Thiết bị chống sét lan truyền đường nguồn T1 + T2 3P (L1, L2, L3, PE, N) - Phoenix Contact - FLT-SEC-T1+T2-3S-350/25-FM - 2905470

3,093
Nhà sản xuất:

Phoenix Contact

;   

Xuất xứ: Germany

Giá sỉ:

Giá tốt nhất xem...0909186879 dienelectrics@gmail.com

Khuyến mãi:Có Discount
Bảo hành:12 Tháng (Chính hãng)
Thanh toán:C.O.D / Bảo lãnh TT / Link hoạt
Vận chuyển:Miễn phí Tp.HCM, vùng lân cận
Thông tin nổi bật
Thông tin chi tiết của sản phẩm

Thiết bị chống sét lan truyền đường nguồn T1 + T2 3P (L1, L2, L3, PE, N) - Phoenix Contact - FLT-SEC-T1+T2-3S-350/25-FM - 2905470



 

Đặt điểm nổi bật

- Phối hợp trực tiếp kết hợp của bộ chống sét loại 1 T1 với thành phần chống sét sừng không có  dòng liên tục (line follow current) và bộ chống sét loại 2 T2 với điện trở phi tuyến (biến đổi); 
- Đặc biệt thích hợp để bảo vệ tối đa các thiết bị nhạy cảm trong môi trường khắc nghiệt;
- Điện áp xoay chiều cao 350 V AC cho các mạng AC 230/400 V với biến động điện áp cao;
- Pluggable: Có thể tháo rời;
- Mức bảo vệ điện áp thấp 1,5 kV;
- Chỉ báo trạng thái quang học, cơ học;
- Với tiếp điểm tải chỉ báo từ xa;
- Có thể kiểm tra phích cắm bằng CHECKMASTER 2


 Logo Logo


 

Bản vẽ kỹ thuật

Application drawing Thiết bị chống sét lan truyền đường nguồn T1 + T2 3P (L1, L2, L3, PE, N) - Phoenix Contact - FLT-SEC-T1+T2-3S-350/25-FM - 2905470
Application drawing

Dimensional drawing Thiết bị chống sét lan truyền đường nguồn T1 + T2 3P (L1, L2, L3, PE, N) - Phoenix Contact - FLT-SEC-T1+T2-3S-350/25-FM - 2905470
Dimensional drawing

Thiết bị chống sét lan truyền đường nguồn T1 + T2 3P (L1, L2, L3, PE, N) - Phoenix Contact - FLT-SEC-T1+T2-3S-350/25-FM - 2905470
Product drawing

Circuit diagram Thiết bị chống sét lan truyền đường nguồn T1 + T2 3P (L1, L2, L3, PE, N) - Phoenix Contact - FLT-SEC-T1+T2-3S-350/25-FM - 2905470
Circuit diagram


 

Thông số kích thước tiêu chuẩn

Height 95.2 mm
Width 142.4 mm
Depth 74.5 mm (incl. DIN rail 7.5 mm)
Horizontal pitch 8 Div.


 

Thông số điều kiện môi trường hoạt động tiêu chuẩn

Degree of protection IP20 (only when all terminal points are used)
Ambient temperature (operation) -40 °C ... 80 °C
Ambient temperature (storage/transport) -40 °C ... 80 °C
Altitude ≤ 2000 m (amsl (above mean sea level))
Permissible humidity (operation) 5 % ... 95 %
Shock (operation) 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (operation) 5g (5 - 500 Hz/2.5 h/X, Y, Z)


 

Thông số chung tổng quát

IEC test classification I + II
  T1 + T2
  T1
  I
EN type T1 + T2
  T1
IEC power supply system TN-S
  TT
Mode of protection L-N
  L-PE
  N-PE
Mounting type DIN rail: 35 mm
Color light grey RAL 7035
  traffic grey A RAL 7042
Housing material PA 6.6-FR 20% GF
  PBT-FR
Degree of pollution 2
Flammability rating according to UL 94 V-0
Type DIN rail module, two-section, divisible
Number of positions 4
Surge protection fault message Optical, remote indicator contact


 

Thông số bảo vệ mạch

Nominal voltage UN 240/415 V AC (TN-S)
  240/415 V AC (TT)
Nominal frequency fN 50 Hz (60 Hz)
Maximum continuous voltage UC 350 V AC
Rated load current IL 125 A (< 55 °C)
Residual current IPE ≤ 0.01 mA
Nominal discharge current In (8/20) µs (L-N) 25 kA
Nominal discharge current In (8/20) µs (L-PE) 25 kA
Nominal discharge current In (8/20) µs (N-PE) 100 kA
Impulse discharge current (10/350) µs (L-N), charge 12.5 As
Impulse discharge current (10/350) µs (L-N), specific energy 160 kJ/Ω
Impulse discharge current (10/350) µs (L-N), peak current value Iimp 25 kA
Impulse discharge current (10/350) µs (L-PE), charge 12.5 As
Impulse discharge current (10/350) µs (L-PE), specific energy 160 kJ/Ω
Impulse discharge current (10/350) µs (L-PE), peak current value Iimp 25 kA
Impulse discharge current (10/350) µs (N-PE), charge 50 As
Impulse discharge current (10/350) µs (N-PE), specific energy 2500 kJ/Ω
Impulse discharge current (10/350) µs (N-PE), peak current value Iimp 100 kA
Follow current interrupt rating Ifi (L-N) 25 kA (264 V AC)
  3 kA (350 V AC)
Follow current interrupt rating Ifi (N-PE) 100 A (350 V AC)
Short-circuit current rating ISCCR 25 kA (264 V AC)
  3 kA (350 V AC)
Voltage protection level Up (L-N) ≤ 1.5 kV
Voltage protection level Up (L-PE) ≤ 2.2 kV
Voltage protection level Up (N-PE) ≤ 1.5 kV
Residual voltage Ures (L-N) ≤ 1.5 kV (at In)
  ≤ 1.2 kV (at 10 kA)
  ≤ 1 kV (at 5 kA)
  ≤ 0.9 kV (at 3 kA)
Residual voltage Ures (L-PE) ≤ 2.2 kV (at In)
  ≤ 2 kV (at 10 kA)
  ≤ 1.8 kV (at 5 kA)
  ≤ 1.6 kV (at 3 kA)
Residual voltage Ures (N-PE) ≤ 1.5 kV (at In)
  ≤ 1 kV (at 10 kA)
  ≤ 0.9 kV (at 5 kA)
  ≤ 0.8 kV (at 3 kA)
TOV behavior at UT (L-N) 415 V AC (5 s / withstand mode)
  457 V AC (120 min / safe failure mode)
TOV behavior at UT (N-PE) 1200 V AC (200 ms / withstand mode)
Response time tA (L-N) ≤ 25 ns
Response time tA (L-PE) ≤ 100 ns
Response time tA (N-PE) ≤ 100 ns
Max. backup fuse with V-type through wiring 125 A (gG)
Max. backup fuse with branch wiring 315 A (gG)


 

Thông số dữ liệu kỹ thuật bổ sung

Maximum discharge current Imax (8/20) µs (L-N) 50 kA
Maximum discharge current Imax (8/20) µs (L-PE) 50 kA
Maximum discharge current Imax (8/20) µs (N-PE) 100 kA


 

Thông số chỉ báo/ điều khiển truyền tín hiệu

Switching function PDT contact
Operating voltage 12 V AC ... 250 V AC
  125 V DC (200 mA DC)
Operating current 10 mA AC ... 1 A AC
  1 A DC (30 V DC)
Connection method Plug-in/screw connection via COMBICON
Screw thread M2
Tightening torque 0.25 Nm
Stripping length 7 mm
Conductor cross section flexible 0.14 mm² ... 1.5 mm²
Conductor cross section solid 0.14 mm² ... 1.5 mm²
Conductor cross section AWG 28 ... 16


 

Thông số kết nối dữ liệu

Connection method Screw terminal blocks
Screw thread M5
Tightening torque 4.5 Nm
Stripping length 18 mm
Conductor cross section flexible 2.5 mm² ... 35 mm²
Conductor cross section solid 2.5 mm² ... 35 mm²
Conductor cross section AWG 13 ... 2
Connection method Fork-type cable lug
Conductor cross section flexible 1.5 mm² ... 16 mm²


 

Thông số kỹ thuật UL

SPD Type 4CA
Maximum continuous operating voltage MCOV (L-L) 528 V AC
Maximum continuous operating voltage MCOV (L-N) 264 V AC
Maximum continuous operating voltage MCOV (L-G) 528 V AC
Maximum continuous operating voltage MCOV (N-G) 264 V AC
Nom. voltage 240/415 V AC
Mode of protection L-L
  L-N
  L-G
  N-G
Power distribution system 3Y
Nominal frequency 50/60 Hz
Measured limiting voltage MLV (L-L) 2470 V
Measured limiting voltage MLV (L-N) 1340 V
Measured limiting voltage MLV (L-G) 1550 V
Measured limiting voltage MLV (N-G) 1080 V
Nominal discharge current In (L-L) 20 kA
Nominal discharge current In (L-N) 20 kA
Nominal discharge current In (L-G) 20 kA
Nominal discharge current In (N-G) 20 kA


 

Tiêu chuẩn UL về chỉ báo và điều khiển truyền tín hiệu

Operating voltage 125 V AC
Operating current 1 A AC
Tightening torque 4 lbf-in.
Conductor cross section AWG 30 ... 14


 

Tiêu chuẩn UL về kết nối dữ liệu

Conductor cross section AWG 12 ... 2
Tightening torque 40 lbf-in.


 

Tiêu chuẩn và Quy định

Standards/regulations IEC 61643-11 2011
  EN 61643-11 2012


 

Tiêu chuẩn thân thiện môi trường

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50
  For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”


 

Tiêu chuẩn phân lớp Classifications

 

eCl@ss

eCl@ss 5.1 27140200
eCl@ss 6.0 27130800
eCl@ss 7.0 27130808
eCl@ss 8.0 27130808
eCl@ss 9.0 27130808


 

ETIM

ETIM 5.0 EC001457
ETIM 6.0 EC001457


 

UNSPSC

UNSPSC 13.2 39121620
 

Approvals

Approvals Thiết bị chống sét lan truyền đường nguồn T1 + T2 3P (L1, L2, L3, PE, N) - Phoenix Contact - FLT-SEC-T1+T2-3S-350/25-FM - 2905470
Approvals Thiết bị chống sét lan truyền đường nguồn T1 + T2 3P (L1, L2, L3, PE, N) - Phoenix Contact - FLT-SEC-T1+T2-3S-350/25-FM - 2905470
 

- Download Tài liệu thông tin chi tiết Thiết bị chống sét lan truyền đường nguồn T1 + T2 3P (L1, L2, L3, PE, N) - Phoenix Contact - FLT-SEC-T1+T2-3S-350/25-FM - 2905470

 

- Download Tài liệu hướng dẫn lắp đặt Thiết bị chống sét lan truyền đường nguồn T1 + T2 3P (L1, L2, L3, PE, N) - Phoenix Contact - FLT-SEC-T1+T2-3S-350/25-FM - 2905470


Sản phẩm cùng loại
SẢN PHẨM XEM NHIỀU
Gọi điện thoại