Transducer điện trở nhiệt Phoenix Contact MINI MCR-2-RTD-UI-C - 2902048

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm PHOENIX CONTACT

• 

  Tìm hiểu về điều hòa, lọc nhiểu, khuếch đại, chuyển đổi tín hiệu điều khiển và đo lường MCR

• Xem thêm

Transducer điện trở nhiệt Phoenix Contact MINI MCR-2-RTD-UI-C - 2902048

 

Product Description

Configurable, 3-way isolated temperature transducer with plug-in connection technology. The device is suitable for the connection of resistance thermometers and remote resistance-type sensors with 2, 3, and 4-conductor connection technology. The measured values are converted into a linear and freely adjustable current or voltage signal. You can configure the device using one of the free software solutions. Default settings can also be made directly on the device by simply using the DIP switches (see configuration table). The measuring transducer supports fault monitoring and NFC communication.

 

Technical Data

Notes

Utilization restriction
EMC note	EMC: class A product, see manufacturer's declaration in the download area

 

Product properties

Product type	Temperature transmitter
Product family	MINI Analog Pro
Type	Signal conditioner
Configuration	DIP switches
	Software
	App
Insulation characteristics
Overvoltage category	II
Pollution degree	2

 

Electrical properties

Electrical isolation	3-way isolation
Protective circuit	Transient protection
Step response (0–99%)	200 ms (2-conductor)
	500 ms (3-conductor)
	500 ms (4-conductor)
Maximum temperature coefficient	0.01 %/K
Transmission error resistance-type sensor	2 Ω
Transmission error resistance thermometer	0.1 % * 350 K / set measuring range; 0.1 % > 350 K (Pt/Ni)
	0.3 % * 200 K / set measuring range; 0.3 % > 200 K (Cu)
Electrical isolation Input/output/power supply
Rated insulation voltage	300 Vrms
Test voltage	3 kV AC (50 Hz, 60 s)
Insulation	Reinforced insulation according to IEC/EN 61010-1
Supply
Supply voltage range	9.6 V DC ... 30 V DC (The DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, item no. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail in accordance with EN 60715)
Typical current consumption	32 mA (24 V DC)
	63 mA (12 V DC)
Power consumption	≤ 850 mW (at IOUT = 20 mA, 9.6 V DC, 600 Ω load)

 

Input data

Signal
Number of inputs	1
Measurement
Number of inputs	1
Configurable/programmable	Yes
Sensor types (RTD) that can be used	Pt, Ni, Cu sensors
Temperature measuring range	-200 °C ... 850 °C (Range depends on sensor type, range can be set freely via software or in increments from -150°C to 850°C via DIP switches)
Temperature measuring range	≥ 20 K
Sensor input current	approx. 200 µA
Max. permissible overall conductor resistance	≤ 25 Ω (Per line, RTD in 3- or 4-conductor technology)
	≤ 50 Ω (adjustable, RTD in 2-conductor technology)
Linear resistance measuring range	0 Ω ... 4000 Ω (Minimum measuring span: 10% of the selected measuring range)
Connection technology	2-, 3-, 4-conductor

 

Output data

Signal: Voltage/current
Number of outputs	1
Configurable/programmable	Yes
Voltage output signal	0 V ... 5 V (via DIP switch)
	1 V ... 5 V (via DIP switch)
	0 V ... 10 V (via DIP switch)
	10 V ... 0 V (via DIP switch)
	0 V ... 10.5 V (can be set via software)
Max. voltage output signal	approx. 12.3 V
Non-load voltage	< 17.5 V
Current output signal	0 mA ... 20 mA (via DIP switch)
	4 mA ... 20 mA (via DIP switch)
	20 mA ... 0 mA (via DIP switch)
	20 mA ... 4 mA (via DIP switch)
	0 mA ... 21 mA (can be set via software)
Max. current output signal	24.6 mA
Short-circuit current	< 31.5 mA
Load/output load voltage output	≥ 10 kΩ
Load/output load current output	≤ 600 Ω (at 20 mA)
Ripple	< 10 mVrms
	< 10 mVrms (at 600 Ω)
Resolution, outputs (voltage)	1 mV
Resolution, outputs (current)	2 µA
Behavior in the event of a sensor error	configurable

 

Connection data

Connection method	Screw connection
Stripping length	10 mm
Screw thread	M3
Conductor cross section rigid	0.2 mm² ... 1.5 mm² (with ferrule)
	0.14 mm² ... 2.5 mm² (without ferrule)
Conductor cross section flexible	0.14 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 12 (flexible)
Tightening torque	0.5 Nm ... 0.6 Nm

 

Ex data

Ex installation (EPL)	Gc
	Div. 2

 

Interfaces

Data: IFS interface
Connection method	Micro USB type B

 

Signaling

Status display	Green LED (supply voltage)
Error indication	Red LED

 

Dimensions

Width	6.2 mm
Height	109.81 mm
Depth	119.2 mm

 

Material specifications

Fire protection for rail vehicles (DIN EN 45545-2) R22	HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R23	HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24	HL 1 - HL 2
Housing material	PBT

 

Environmental and real-life conditions

Ambient conditions
Degree of protection	IP20 (not assessed by UL)
Ambient temperature (operation)	-40 °C ... 70 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Altitude	≤ 2000 m
Permissible humidity (operation)	5 % ... 95 % (non-condensing)

 

Approvals

CE
Certificate	CE-compliant
ATEX
Identification	 II 3 G Ex ec IIC T4 Gc
Certificate	BVS 20 ATEX E 024 X
UKCA Ex (UKEX)
Identification	 II 3 G Ex ec IIC T4 Gc
Certificate	PxCIF21UKEX2902049X
IECEx
Identification	Ex ec IIC T4 Gc
Certificate	IECEx BVS 20.0017X
UL, USA/Canada
Identification	UL 508 Listed
	Class I, Div. 2, Groups A, B, C, D T6
	Class I, Zone 2, Group IIC T6
Shipbuilding approval
Certificate	DNV GL TAA00002UA
EAC Ex
Identification	 2Ex ec IIC T4 Gc
Certificate	BY/112 02.01 TP012 103.01 00079
DNV GL data
Temperature	B
Humidity	B
Vibration	A
EMC	A
Enclosure	Required protection according to the Rules shall be provided upon installation on board

 

EMC data

Noise immunity	EN 61000-6-2
Note	When being exposed to interference, there may be minimal deviations.
Electromagnetic compatibility	Conformance with EMC directive
Noise emission	EN 61000-6-4
Electrostatic discharge
Standards/regulations	EN 61000-4-2
Electrostatic discharge
Comments	Safety measures must be taken to prevent electrostatic discharge.
Electromagnetic HF field
Designation	Electromagnetic RF field
Standards/regulations	EN 61000-4-3
Typical deviation from the measuring range final value	0.06 %
Fast transients (burst)
Designation	Fast transients (burst)
Standards/regulations	EN 61000-4-4
Typical deviation from the measuring range final value	0.1 %
Surge current load (surge)
Standards/regulations	EN 61000-4-5
Conducted interference
Designation	Conducted interferences
Standards/regulations	EN 61000-4-6
Typical deviation from the measuring range final value	0.07 %

 

Standards and regulations

Electrical isolation

3-way isolation

 

Mounting

Mounting type	DIN rail mounting
Assembly instructions	The DIN rail connector can be used for bridging the supply voltage. It can be snapped onto a 35 mm EN 60715 DIN rail.
Mounting position	any

 

Commercial Data

Item number	2902048
Packing unit	1 pc
Minimum order quantity	1 pc
Note	Made to Order (non-returnable)
Sales Key	CK1421
Product Key	CK1421
Catalog Page	Page 82 (C-5-2019)
Weight per Piece (including packing)	126.5 g
Weight per Piece (excluding packing)	110 g
Customs tariff number	85437090
Country of origin	DE

 

Classifications

ECLASS

ECLASS-11.0	27210129
ECLASS-12.0	27210129
ECLASS-13.0	27210129

 

ETIM

ETIM 8.0

EC002919

 

UNSPSC

UNSPSC 21.0

41112100

 

Approvals

DNV GL

Approval ID: TAA00002UA

L Listed

Approval ID: FILE E 238705

cUL Listed

Approval ID: FILE E 238705

IECEx

Approval ID: IECEx_BVS_20.0017X

cUL Listed

Approval ID: FILE E 196811

UL Listed

Approval ID: FILE E 196811

ATEX

Approval ID: BVS 20 ATEX E 024 X
 

Environmental Product Compliance

REACh SVHC	Lead 7439-92-1
China RoHS	Environmentally Friendly Use Period = 50 years
	For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

 

Compatible Products

Accessories

 All  Adapter  Communication module  Connector set  DIN rail bus connectors  Marker for end clamp  Marker strip  Module carrier  Monitoring module  Plastic label  Power supply unit  Power terminal block  Programming adapter  System adapter 

Product type
TC-D37SUB-AIO16-MP-PS-UNI - 2906640
Module carrier
TC-D37SUB-ADIO16-MP-P-UNI - 2906639
Module carrier
ME 6,2 TBUS-2 1,5/5-ST-3,81 GY - 2695439
DIN rail bus connectors
QUINT4-SYS-PS/1AC/24DC/2.5/SC - 2904614
Power supply unit
ME 6,2 TBUS-2 1,5/5-ST-3,81 GN - 2869728
DIN rail bus connectors
MINI MCR-2-PTB - 2902066
Power terminal block
MINI MCR-2-PTB-PT - 2902067
Power terminal block
MINI MCR-2-FM-RC - 2904504
Monitoring module
MINI MCR-2-FM-RC-PT - 2904508
Monitoring module
MINI MCR-2-V8-FLK 16 - 2901993
System adapter
MINI MCR-2-V8-MOD-RTU - 2905634
Communication module
MINI MCR-2-V8-MOD-TCP - 2905635
Communication module
MINI MCR-2-V8-PB-DP - 2905636
Communication module
MINI MCR-2-V8-PN - 2905637
Communication module
IFS-USB-PROG-ADAPTER - 2811271
Programming adapter
IFS-BT-PROG-ADAPTER - 2905872
Adapter
TWN4 MIFARE NFC USB ADAPTER - 2909681
Programming adapter
FASTCON PRO-SET - 2906227
Connector set
FASTCON PRO-SET-PT - 2906228
Connector set
UCT-EM (30X5) - 0801505
Marker for end clamp
UCT-EM (30X5) CUS - 0801589
Marker for end clamp
SK 5,0 WH:REEL - 0805221
Marker strip
UC-EMLP (15X5) - 0819301
Plastic label
UC-EMLP (15X5) YE - 0822615
Plastic label
UC-EMLP (15X5) CUS - 0824550
Plastic label
UC-EMLP (15X5) YE CUS - 0824551
Plastic label
UC-EMLP (15X5) SR - 0828095
Plastic label
UC-EMLP (15X5) SR CUS - 0828099
Plastic label
US-EMLP (15X5) - 0828790
Plastic label
US-EMLP (15X5) YE - 0828873
Plastic label
US-EMLP (15X5) SR - 0828874
Plastic label
US-EMLP (15X5) CUS - 0830076
Plastic label
US-EMLP (15X5) YE CUS - 0830077
Plastic label
US-EMLP (15X5) SR CUS - 0830078
Plastic label
UCT-EM (30X5) YE - 0830340
Marker for end clamp
UCT-EM (30X5) YE CUS - 0830348
Marker for end clamp