Inductive standard sensors with preferred types
Cylindrical sensors in Ø 6.5 mm, M8, M12, M18, M30 and block design 40 × 40 mm; Flush and non-flush versions; Flush ranges up to 50 mm; Non-flush ranges up to 105 mm; Plug or cable connection
Inductive 2-wire sensors
Our standard line of 2-wire versions
Sensors in M8 to M30 style
Range of 0…50 mm
Pressure-rated inductive sensors
Pressure-resistant to 500 bar
High-temperature-resistant up to 120 °C
Appropriate for use in explosion-protected areas
Overall dimensions from M5 to M18
Short and long configurations
With and without fixed stop
Hygienic inductive sensors
Custom stainless steel, such as 1.4404, 1.4571
High chemical resistance
High degree of protection IP67 to IP69K
Extended temperature range available
Ecolab, FDA certifications available
Safe cleaning (CIP)
Various configurations and sizes
Inductive Factor 1 sensors
High sensing distance without reduction factor for all metals
Magnetic field immune
Installation in different metals possible
High-precision and flexible use
Various configurations and sizes
Inductive full-metal sensors
Stainless steel: Form factors from M8 to M30 and block-style housings
Switching distances from 1.5...8 mm
Extremely rugged
High switching distance
Factor 1 sensors and selective sensors (ferrous/non-ferrous)
Resistant to abrasive media and cleaning agents
Various configurations and sizes
Magnetic-field-resistant inductive sensors
Extremely rugged
Magnetic field immune
Weld-spatter-resistant
Resistant to abrasive media and cleaning agents
Various configurations and sizes
Weld-immune inductive sensors
Extremely rugged
Magnetic field immune
Weld-spatter-resistant
Resistant to abrasive media and cleaning agents
Various configurations and sizes
Temperature-rated inductive sensors
Switching distance temperature compensated
Temperature ranges to 230 °C available
High IP68 rating
Stainless steel housing 1.4571
Various configurations and sizes
Inductive sensors for hazardous areas
Applicable for zones 2G/1D and 3G/3D
Pressure-resistant to 500 bar
High-temperature-resistant up to 120 °C
Can be combined with NAMUR amplifiers
Non-contacting and thus free from wear
Impervious to contamination
Short-circuit protected
Media-resistant
Inductive NAMUR sensors
Consist essentially of an oscillator with a dampable oscillator coil and a demodulator
For end-of-travel monitoring on hydraulic cylinders or position detection on valves
For use in Zone 1 or Zone 2 explosion hazard areas when used with suitable isolating switching amplifiers
Inductive ring and tube sensors
Easy installation (since they can be mounted side-by-side and universally installed and can be stacked with a spacing of ≥ 20 mm)
Very reliable (due to inductive sensor principle)
Optimal for detecting small parts (with integrated pulse extension, permanently set)
Simple attachment to the infeed tube
With pulse extension of 150 ms for reliable detection of fast-moving parts
Object speed max. 20 m/s
Inductive distance sensors
Tubular types from Ø 6.5 mm to M30 and many block-style housings
Compact, solid and reliable
Non-contacting and thus free from wear
Absolute measuring principle
Measurement range from 0.2 to 50 mm, also teachable
Short response time, high reproducibility and linearity
Broad temperature range, minimal temperature drift
Simple to use with absolute analog voltage, current or IO-Link signal
Inductive positioning systems
Measurement ranges adjustable from 0…133 mm
No mechanical adjustment is necessary
Non-contacting and thus free from wear
Reliably detect travel using a simple target – a simple machine member can be used as the target
High repeat accuracy and precise positioning
Analog and digital interfaces
BCC02NW
BCC M313-0000-10-001-VX8334-050
Single-Ended Cordsets
Connection=M8x1-Female, straight, 3-pin, A-coded, Cable=PVC gray, 5.00 m, Drag chain compatible, Number of conductors=3, Cable temperature, fixed routing=-40...105 °C, Cable temperature, flexible routing=-5...105 °C, Operating voltage Ub=60 VDC / 60 VAC, Rated current (40 °C)=4.0 A, Protection degree=IP67, IP69K, Approval/ Conformity= CE/ cULus/ EAC/ WEEE
BCS00NA
BCS M30BBI2-PSC15D-S04K
Capacitive Sensors
Dimension=Ø 30 x 79 mm, Series=M30, Thread (A)=M30x1.5, Installation=for flush mounting, Connection=Connector, M12x1-Male, 3-pin, Switching output=PNP normally open (NO), Switching frequency=100 Hz, Range=2...15 mm, Sensitivity=Switching distance adjustable, Housing material=PBT, Material sensing surface=PBT, Ambient temperature=-25...85 °C, Operating voltage Ub=10...30 VDC, Approval/ Conformity= CE/ cULus/ WEEE, IP rating=IP67
BES01H6
BES 516-356-S4-C
Inductive Sensors
Dimension=Ø 12 x 70 mm, Style=M12x1, Installation=non-flush, Range=4 mm, Switching output=PNP normally open (NO), Switching frequency=2500 Hz, Housing material=Stainless steel, Material sensing surface=PBT, Connection=Connector, M12x1-Male, 4-pin, Operating voltage Ub=10...30 VDC, Ambient temperature=-40...85 °C, IP rating=IP68, Approval/ Conformity= CE/ cULus/ EAC/ WEEE
BMF0043
BMF 303K-PS-C-2A-SA2-S49-00,3
Magnetic Sensors
Dimension=25.5 x 3 x 4.5 mm, Connection=M8x1-Male, 3-pin, Cable=PUR, 0.3 m, Application=miniaturized actuators, Mounting=Mounting bracket BMF 303-HW*, Housing material=LCP, Switching output=PNP normally open (NO), Switching frequency=30000 Hz, Operating voltage Ub=10...30 VDC, Ambient temperature=-25...85 °C, IP rating=IP67, Approval/ Conformity=cULus/ CE/ WEEE
BFB0004
BFB 75K-001-P-S75
Photoelectric Sensors
Series=75K, Dimension=10.4 x 35.4 x 84 mm, Interface=PNP normally open/normally closed (NO/NC), Principle
of operation=Fiber optic device, Input function=Same function as button/Key disable on/off,
Setting=Light-on/dark-on/Factory setting (Reset)/Sensitivity (Sn), Operating voltage Ub=10...30 VDC, Light
type=LED, red light, Connection=Connector, M8x1-Male, 4-pin, Housing material=ABS, Switching frequency=1500
Hz, Approval/ Conformity= CE/ cULus/ EAC/ WEEE
BES01PY
BES M12MD-PSC80F-S04G
Inductive Sensors
Dimension=Ø 12 x 45 mm, Style=M12x1, Installation=non-flush, Range=8 mm, Switching output=PNP normally
open (NO), Switching frequency=1000 Hz, Housing material=Brass, Surface protection=Nickel-free coated,
Material sensing surface=PBT, Connection=Connector, M12x1-Male, 4-pin, Operating voltage Ub=10...30 VDC, Ambient temperature=-25...70 °C, IP rating=IP68, Approval/ Conformity = CE/ cULus/ EAC/ WEEE
BES01TH
BES Q08ZC-POC30B-S49G
Inductive Sensors
Dimension=59 x 8 x 8 mm, Style=8x8, Installation=for flush mounting, Range=3 mm, Switching output=PNP normally closed (NC), Switching frequency=1000 Hz, Housing material=Zinc, Die casting, Material sensing surface=PBT, Connection=Connector, M8x1-Male, 3-pin, Operating voltage Ub=10...30 VDC, Ambient temperature=-25...70 °C, IP rating=IP67, Approval/ Conformity=cULus/ CE/ EAC/ WEEE
BOS0128
BOS 5K-PS-RD11-S75
Photoelectric Sensors
Series=5K, Dimension=10.8 x 43.5 x 19.5 mm, Interface=PNP normally open (NO), Principle of operation=Photoelectric sensor, Principle of optical operation=Diffuse sensor, energetic, Beam characteristic=Divergent, Light type=LED, red light, Light spot size=Ø 8 mm at 180 mm, Range=50...200 mm, Connection=Connector, M8x1-Male, 4-pin, Housing material=PC PBT, Material sensing surface=PC, Operating voltage Ub=10...30 VDC, Approval/ Conformity= cULus/ CE/ WEEE
BTL0R12
BTL5-T120-M0500-B-S103
Magnetostrictive Sensors
Magnetostrictive system
BES00JL
BES 516-3007-G-E4-C-S49-01
Inductive Sensors
Dimension=Ø 4 x 27 mm, Style=D4.0, Installation=for flush mounting, Range=1.5 mm, Switching output=PNP normally open (NO), Switching frequency=5000 Hz, Housing material=Stainless steel, Material sensing surface=PBT, Connection=Cable with connector, M8x1-Male, 3-pin, 1.00 m, PUR, Operating voltage Ub=10...30 VDC, Ambient temperature=-25...70 °C, IP rating=IP67, Approval/ Conformity= CE/ cULus/ EAC/ WEEE
BES01CW
BES 516-326-S4-C
Inductive Sensors
Dimension=Ø 18 x 83 mm, Style=M18x1, Installation=for flush mounting, Range=5 mm, Switching output=PNP normally open (NO), Switching frequency=900 Hz, Housing material=Brass, Surface protection=nickel plated, Material sensing surface=PA 12, Connection=Connector, M12x1-Male, 4-pin, Operating voltage Ub=10...30 VDC, Ambient temperature=-25...70 °C, IP rating=IP68, Approval/ Conformity= CE/ cULus/ EAC/ WEEE
BES03Y8
BES Q08MEC-PSC20B-S49G
Inductive Sensors
Dimension=27 x 8 x 8 mm, Style=8x8, Installation=for flush mounting, Range=2 mm, Switching output=PNP normally open (NO), Switching frequency=3000 Hz, Housing material=Brass, Surface protection=Nickel-free coated, Material sensing surface=PBT, Connection=Connector, M8x1-Male, 3-pin, Operating voltage Ub=10...30 VDC, Ambient temperature=-25...70 °C, IP rating=IP67, Approval/ Conformity= cULus/ CE/ EAC/ WEEE
BOS01Y4
BOS Q08M-PS-KE21-S49
Photoelectric Sensors
Series=Q08M, Dimension=8 x 59 x 8 mm, Interface=PNP normally open (NO), Principle of operation=Photoelectric sensor, Principle of optical operation=Through-beam sensor (receiver), Light type=Red light, Range=0...2.2 m, Connection=Connector, M8x1-Male, 3-pin, Housing material=Zinc, Die casting, Material sensing surface=PMMA, Operating voltage Ub=10...30 VDC, Approval/ Conformity= CE/ cULus/ EAC/ WEEE
BOS018K
BOS Q08M-X-LS20-S49
Photoelectric Sensors
Series=Q08M, Dimension=8 x 59 x 8 mm, Principle of operation=Photoelectric sensor, Principle of optical operation=Through-beam sensor (Emitter), Beam characteristic=divergent, 2 mrad, Light type=Laser red light, Light spot size=Ø 3.0 mm Light exit, Range=0...3 m, Connection=Connector, M8x1-Male, 3-pin, Housing material=Zinc, Die casting, Material sensing surface=PMMA, Operating voltage Ub=10...30 VDC, Approval/ Conformity= CE/ cULus/ EAC/ WEEE
BOS0199
BOS Q08M-PS-LE20-S49
Photoelectric Sensors
Series=Q08M, Dimension=8 x 59 x 8 mm, Interface=PNP normally open (NO), Principle of operation=Photoelectric sensor, Principle of optical operation=Through-beam sensor (receiver), Light type=Laser red light, Range=0...3 m, Connection=Connector, M8x1-Male, 3-pin, Housing material=Zinc, Die casting, Material sensing surface=PMMA, Operating voltage Ub=10...30 VDC, Approval/ Conformity= CE/ cULus/ EAC/ WEEE
BUS0026
BUS M18M1-XA-02/015-S92G
Ultrasonic Sensors
Style=Ø 18 mm, Analog output=Analog, voltage 0…10 V, Connection=Connector, M12x1-Male, 5-pin, Housing material=Nickel-plated brass PBT, Material sensing surface=PU foam/Epoxy resin/Glass, Range=25...250 mm, Approval/Conformity=cULus LISTED/CE/EAC/WEEE, Ambient temperature=-25...70 °C, IP rating=IP67, Repeat accuracy=± 0.15 %FS, Operating voltage Ub=15...30 VDC
dienelectrics@gmail.com
0909186879 
