AGC 150 Hybrid
Minimum Genset load
Load calculation in terms of solar power
Genset start/stop based on mains import/export
AGC-4 Mk II
Automatic Mains Failure sequence
Multi-master Power Management
Power Management Core (32dg)
AGC 150 Remote Display
Product solutionIntegrable renewable hybrid power solution
Product solutionBasic control package for mobile generators
Product solutionControl solution for generator manufacturers
Product solutionSwitchboard control package
Product solutionSafe substation maintenance
Product solutionAdvanced control package for mobile generators
208 & 212
2EQ & 2EVQ
Dual pointers on common scale
Robust and thoroughly tested construction
Available in Q96 DIN size design
2FTQ & 2FQ
Standard pointers, diagonal. 45 to 65 Hz, 150 to 600 V AC.
Robust and thoroughly tested construction
Available in Q96 DIN size design
AAL-111Q96
ADL-111Q96
AEM 380 & 305
AFC plant management
AGC 100
AGC 150 Generator
Synchronization
Power Management Core (32dg)
-40 degree support
AGC 150 BTB
Automatic close of bus tie breaker if the system requests help
Manual control of bus tie breaker
Section management
AGC 150 Mains
Mains (Utility)
power monitoring (kW, kV, A & pf)
decoupling protection
kW export protection
AGC 150 Stand alone
-40 degree support
PLC logic
Engine and Generator protection
AGC 200
Up to 32 gensets in one plant
Synchronisation of up to 56 breakers in one plant
Multiple operating modes in one software
AGC plant management
Fully scalable multi-master system of up to 992 gensets
Simple graphical configuration
Easy control from one central point of intelligence
AGC-2
AGC-3
AGC-4
Up to 32 gensets in one plant
The intuitive, preprogrammed touch display saves you time and smoothes operation
Four general purpose PID regulators that control auxiliary systems
AGI 100 series
AGI 300
Robust aluminium housing
Resistive and capacitive touch screen variants
True glass front (capacitive touch screen variants only)
AGI 400
Wide screen format
True glass front
Capacitive touch screen
ALC-4
Prioritised load groups
Anticipated load-dependent start
Integrated in power management system
APU-4
Complies with G59/3 and G99
Includes free utility software – available for download
Modbus TCP/IP communication
ASC plant management
Maximising PV penetration
Spinning reserve demand
Minimum genset load requirement
ASC-4 Battery
Solar, storage, wind, Mains and genset integration in hybrid applications
ASC-4 sustainable controllers and AGC-4 Mk II/AGC 150 let you control up to 32 gensets
Applications with up to 16 sustainable power plants
ASC-4 Solar
Solar, storage, wind, Mains and genset integration in hybrid applications
ASC-4 sustainable controllers and AGC-4 Mk II/AGC 150 let you control up to 32 gensets
Simple graphical configuration
ASK & ASR
Designed for cables and busbar
Primary current: 40 to 7,500 A
Secondary current: 5 or 1 A
AWC 500
Cold start-up/Operating temperature: -40 to 70°C
Storage temperature: -40 to 85 °
Climate: 55 °C 97 % RH condensing
BEQ
3.0 accuracy class (1.5 for moving iron)
90 ° pointer deflection
IP52 protection
BQ
3.0 accuracy class
90 ° pointer deflection
IP52 protection
CGC 200
Engine and Generator protection
Front mount
Generator voltage measuring
CGC 400
PLC logic
Engine and Generator protection
Engine CANbus
CIO 116
16 digital inputs
Positive or negative common for 2x8 inputs
CAN bus interface
CIO 208
8 relay outputs
240 V AC or 30 V DC relay contacts
8 A relay rating
CIO 308
8 multi-functional inputs
Wire break detection
CAN bus interface
CODESYS
CODESYS-based (compliant with other PLCs. Programmes based on CODESYS V2)
Integrated HMI/Web visualisation
Graphical PLC configuration
CODESYS External C lib package
Windows XP, 7 or later
AWC 500 CODESYS development package
AWC 500 C/C++ development package
CSQ-3
Multi-function precision LED synchroscope
Easy push-button programming of all set points
Very high user safety
D45, E45 & B45
DIN rail mounting
Class 1.5
90 ° pointer deflection
DBC-1
Automatic and electronic protection features
Automatic restart after fault condition
Alarm relay
DCP2 (24V)
Automatic and electronic protection features
Automatic restart after fault conditions
Automatic output power derating for high ambient temperatures
DM 400 gas
Gas engine and generator control, protection, synchronising and load sharing for both active and reactive power
Mains protection including loss of mains detection
Control of aux systems: gas mixture and gas circuit, air circuits/exhaust gas, cooling circuits/ emergency coolers, heating circuits etc
DM 400 hydro
Hydro Turbine Controller for parallel with mains or stand-alone generator
Valve controls (main/drain/fill)
Water level control
DM-4 gas
DQ & VDQ
Accuracy class: 1.5
90 ° or 240 ° pointer deflection
IP52 protection (IP54 on request)
DVC 310
Start management capability with start on threshold, soft start, and Close Before Excitation (CBE) functions
Voltage regulation accuracy +/-0.25 %
Optimise genset performance and size using exclusive engine help functions (load acceptance module, negative forcing, U/f, soft voltage recovery and stator current limitation)
DVC 550
Unique CANbus integration between DVC 550 and AGC genset controller
Start management capability with start on threshold, soft start and close before excitation (run-up sync)
Intelligent drying and ventilation mode for generators
Eclipse
Open development environment
One-click target-built and upload
Debugging
Emulation solution
Power management test before installation
Customer approval of sequences before installing
Breaker/engine/mains failure, load change and digital input signals test with only DEIF controllers, but no other external equipment
EPN-110DN
Control of electronic speed governors
Setting of integrating time
Adjustment of output signal
EPQ96-2
Control of electronic speed governors
Setting of integrating time (like variable gearboxes)
Adjustment of output signal
FAS-113DG
Automatic.
Voltage regulation
Breaker-time compensation.
FAS-115DG
Automatic.
Voltage regulation
Breaker-time compensation.
FCT
The flexible current transformer is designed for easy integration in a variety of applications and systems
Ideal for power quality monitoring
≤ 1% Maximum measurements error (of final range value). MIC-2 MKII FCT and MIC-2 MKII FCT DIN including flexible current transformer
Flexible Multi-line 300 test switchboard
FQ & FTQ
Q72 and Q96
90 ° movement pointer
Exchangeable scale
GC-1F
GPC-3
Synchronization
PLC logic
Engine and Generator protection
GPC-3 gas
Mains/Generator/Motor protection
The unique M-Logic, a simple configuration tool
Engine protection with backup on shutdown channels
GPC-3 hydro
Mains/Generator/Motor protection
The unique M-Logic, a simple configuration tool
Turbine protection with back-up on shut-down channels
GPU-3
PLC logic
Engine and Generator protection
Engine CANbus
GPU-3 gas
Generator/busbar protection
Synchronisation
Multiple display units and operator panels possible
GPU-3 hydro
Generator/busbar protection
Synchronisation
Multiple display units and operator panels possible
HAS-111DG
Synchronisation of generator to busbar
Circuit breaker time compensation
Voltage control
HC 36/24
36 × 24 mm. for flush mounting.
For AC or DC measuring voltage
Synchronous motor (AC version)
HC 48
48 × 48 mm.
IP40 or IP65
Adapter frames: 55 × 55 mm, 72 × 72 mm. for panel mounting
Insight
Visualised solution overview via customisable dashboard
World map overview and GPS tracking
Alarm notifications (email)
KBU
Primary current: 100 to 5,000 A
Secondary current: 5 or 1 A
Burden: 1.25 to 30 VA
KSU & SUSK
Primary current: 1 or 5 A
Secondary current: 5 or 1 A
Accuracy class/protection class: 0.5 or 1.0
LMR-111D
Vector shift
Detection of vector shift
ANSI code 78
LMR-122D
Vector shift and df/dt (ROCOF)
Detection of vector shift
ANSI code 78
LSQ
3-lamp synchroscope. For indication of phase and voltage accordance
For indication of phase and voltage accordance
DIN standard size: Q96
LSU-112DG
Frequency and power control
Built-in power and frequency transducer
Constant power or isochronous mode
LSU-113DG
Frequency and power control. With -P>
Built-in power and frequency transducer
Constant power or isochronous mode
LSU-114DG
Frequency and power control. With start/stop
Built-in power and frequency transducer
Constant power or isochronous mode
LSU-122DG
Reactive. U and Q control
Built-in power and frequency transducer
Constant power or isochronous mode
MDR-2
Short response time (70 ms)
3-phase current detection on both generator sides
Active adjustment of non-balanced current measurements
MIB 7000
1- or 3-phase TRMS measurements
Voltage inputs 690 L-L AC
Accuracy: 0.5 or 1.0
MIC
3-phase TRMS measurements
Voltage inputs 400 L-L AC
Accuracy: 0.2 or 0.5
MIC-2 MKII
Measures voltage, current/active/reactive and apparent power, frequency, energy kWh/kvarh, PF, THD, demand
For all 2- and 3-phase AC network topologies
Suitable for Power quality analysis
MIC-2 MKII DIN
Measures voltage, current/active/reactive and apparent power, frequency, energy kWh/kvarh, PF, THD, demand
For all 2- and 3-phase AC network topologies
Suitable for Power quality analysis
MIC-2 MKII FCT
Measures voltage, current/active/reactive and apparent power, frequency, energy kWh/kvarh, PF, THD, demand
For 2- and 3-phase AC network topologies
Compatible with DEIF’s FCT flexible current transformers (up to 6,000A measuring range) which are ideal for if space is limited
MIC-2 MKII FCT DIN
Measures voltage, current/active/reactive and apparent power, frequency, energy kWh/kvarh, PF, THD, demand
For 2- and 3-phase AC network topologies
Compatible with DEIF’s FCT flexible current transformers (up to 6,000A measuring range) which are ideal for if space is limited
MTR-3
Suitable for all 1- and 3-phase network topologies
Up to 1000 VL-L AC input
Accuracy class: 0.5 or 0.4
MTR-3 Wind
Suitable for all 1- and 3-phase network topologies
Up to 1000VL-L AC input
Accuracy class: 0.5 or 0.3
MTR-4P
Up to 1,000 V L-L AC voltage input
Up to 20 A AC current input
Accuracy class: 0.5
MVR-200 series
Three phase overcurrent protection stages INST, DT or IDMT
(Sensitive) Earth-fault protection stages INST, DT or IDMT
Harmonic overcurrent protection / inrush blocking stages INST, DT or IDMT
NEQ
Simple and thoroughly tested synchronisation supervision
Easy-to-read scale
DIN standard sizes: Q72 and Q96
PCM5٠1
50 W power supply with redundant inputs and 50 ms power fail protection. Input range: 18…36 V
1 × digital relay output: 24 V, maximum 1 A resistive
1 × digital input 9…36 V
PCT
Current Transformer with Voltage Tab
Voltage Output, with Fuse
Primary Current 32 A or 64 A
PHQ
PLC Link
Translate Simulink models and Stateflow charts automatically into IEC 61131-3 structured text (ST), ANSI C and Pascal (DELPHI)
Build stand-alone applications and download directly to your PLC or generate code for implementation into existing PLC projects
Make you own code intergration, test systems, 3rd party system interfacing, code wrapping and many others with the Plugin Interface allowing custom user interaction with PLC Link.
Power supply
Power Boost function
Low voltage detection output
Side-by-side mounting
Remote Access Support
RMB
Safe interruption of transformer substations
Handles load jumps during synchronisation
Voltage remains stable during load jumps, with max 2 % deviation
RMC-111D
Short circuit relay (I>>)
ANSI code 50 and 51
Measurement of 3-phase currents
RMC-121D
Short circuit and over-current circuit relay (I> + I>>)
ANSI code 50 and 51
Measurement of 3-phase currents
RMC-122D
Short circuit and over-current
I>>: 100 to 400 %, I>: 50 to 150 %
Combined functionality
RMC-131D
Differential current relay
ANSI code 87
Measurement of 3-phase currents
RMC-132D
Double over-current relay (I> + I>)
ANSI code 50 and 51
Measurement of 3-phase currents
RMC-142D
Earth fault protection at two levels
Built-in filter for 3rd harmonic
LED indication of fault condition
RMF-112D
Combined under-frequency/over-frequency
For 1- and 3-phase networks
LED indication of fault condition
RMT-111Q96
Sequence check (relay)
230 or 400 V AC, 47 to 63 Hz
Continuous operation
RMV-112D
Under- and over-voltage.
U>: 100 to 120 %, U<: 80 to 100 %.
Under-voltage/over-voltage (U< + U>)
RMV-122D
Over-voltage (double).
U>: 100 to 120 %,U>: 100 to 120 %.
Under-voltage/over-voltage (U< + U>)
RMV-132D
Under-voltage (double).
U<: 80 to 100 %, U<: 80 to 100 %.
Under-voltage/over-voltage (U< + U>)
RMV-142D
Under- and Over-voltage.
U>: 100 to 120 %, U<: 80 to 100 %.
Single phase measurement.
RSQ-3
Precision LED synchroscope
LED circle indicates the frequency difference
Galvanically separated
SASR & SASK
Designed for cables and busbar
Secondary current: 5 or 1 A
Accuracy class/protection class up to 10P10
SCT
SGC 110
Engine and Generator protection
Front mount
Generator voltage measuring
SGC 410
Engine and Generator protection
Engine CANbus
Front mount
Shunt resistors
Dimensions to DIN 43703
Class 0.5
Extensive programme
SIM-Q
TAC-311DG
TAC-321DG
TAS-311DG
Factory-configured transducer for voltage, current, frequency or phase angle measurement
Aux supply: from 57 to 690 V AC
Aux supply: 24 to 220 V DC
TAS-321DG
Factory-configured transducer for bidirectional current measurement.
Aux supply: from 57 to 690 V AC
Aux supply: 24 to 220 V DC
TAS-331DG
Factory-configured transducer for power or reactive power measurement.
Aux supply: from 57 to 690 V AC
Aux supply: 24 to 220 V DC
TAV-311DG
TAV-321DG
TDG-210DG
Converting one type of DC signal into another DC signal
Converting potentiometer input into a DC signal
Separating a number of earthing points
TDU series
Plug and play
Build in AOP (additional operators panel) customizable buttons and status lamps
Quick instrument selection directly from the screen
USW-3
Graphical tool for plant single line diagram
Set controller parameters and configure advanced logic
Configure controller I/O and external I/O equipment
WQ
1.5 accuracy class
90 ° and 240 ° pointer deflection
IP52 protection (IP54 on request)
WQR96 MKII, WQR96-x MKII & WQR96-c MKII
Accuracy class 1.0 (EN 62053-21)
For single-phase and 3-phase net-works
Microprocessor-controlled meters with pulse output (SO)
WSK
Primary current: 1 to 150 A
Secondary current: 5 or 1 A
Burden: 2.5 to 15 VA
ASC-4 Battery Single Controller
Storage integration in hybrid applications
ASC-4 sustainable controllers connect upto 16 gensets for Storage-Diesel
Simple graphical configuration
ASC-4 Solar Single controller
Solar integration in hybrid applications
ASC-4 sustainable controllers connect upto 16 gensets for PV-Diesel
Simple graphical configuration
ASC 150 Solar
Useful for brownfield applications
Makes sure that there is a minimum genset load
Optimises the diesel genset load for high efficiency and low carbon footprint
ASC 150 Storage
Useful for rental and brownfield applications
Automatically charges and discharges the ESS
Optimises the diesel genset load for high efficiency and low carbon footprint
WQ2R96 MKII
MIB 8000
1- or 3-phase TRMS measurements
Voltage inputs 690 L-L AC
Accuracy: 0.2 to 1.0, see datasheet
SGC 120
Engine and Generator protection
Front mount
Generator voltage measuring
SGC 121
Engine and Generator protection
Front mount
Generator voltage measuring
SGC 420
Engine and Generator protection
Engine CANbus
Front mount
SGC 421
Engine and Generator protection
Engine CANbus
Front mount
iE 250
AGC Steam
SGC 120 MK II
SGC 420 Mk II
Rudder system solution
Product solutionWind indicator system solution
Product solutionPower management solution
172 & 173
2EQ & 2EVQ
Dual pointers on common scale
Robust and thoroughly tested construction
Available in Q96 DIN size design
2FTQ & 2FQ
Standard pointers, diagonal. 45 to 65 Hz, 150 to 600 V AC.
Robust and thoroughly tested construction
Available in Q96 DIN size design
827
AAL-111Q96
AAL-2
Insulation monitoring of AC networks of up to 440 V AC
10 M or 1 M ranges
Adjustable warning set point
AEM 380 & 305
AGI 100 series
AGI 300
Robust aluminium housing
Resistive and capacitive touch screen variants
True glass front (capacitive touch screen variants only)
AGI 400
Wide screen format
True glass front
Capacitive touch screen
AL8-2
Compact Q96 design
Extremely easy push-button programming
Individual programming of each input: N/O or N/C, time delay, alarm inhibit, output and cable supervision
DBC-1
Automatic and electronic protection features
Automatic restart after fault condition
Alarm relay
DCP2 (24V)
Automatic and electronic protection features
Automatic restart after fault conditions
Automatic output power derating for high ambient temperatures
DM-4 marine
Internal system supervision
Engine control, monitoring and protection
3-phase generator protections
DQ & VDQ
Accuracy class: 1.5
90 ° or 240 ° pointer deflection
IP52 protection (IP54 on request)
ECU 100
Engine start/stop
Engine monitoring & protection
CAN bus engine communication, J1939
EPN-110DN
Control of electronic speed governors
Setting of integrating time
Adjustment of output signal
EPQ96-2
Control of electronic speed governors
Setting of integrating time (like variable gearboxes)
Adjustment of output signal
FAS-113DG
Automatic.
Voltage regulation
Breaker-time compensation.
FAS-115DG
Automatic.
Voltage regulation
Breaker-time compensation.
FCT
The flexible current transformer is designed for easy integration in a variety of applications and systems
Ideal for power quality monitoring
≤ 1% Maximum measurements error (of final range value). MIC-2 MKII FCT and MIC-2 MKII FCT DIN including flexible current transformer
Flexible Multi-line 300 test switchboard
FQ & FTQ
Q72 and Q96
90 ° movement pointer
Exchangeable scale
GCU 100
Engine start/stop
Engine monitoring & protection
CAN bus engine communication, J1939
GPU-3
PLC logic
Engine and Generator protection
Engine CANbus
HAS-111DG
Synchronisation of generator to busbar
Circuit breaker time compensation
Voltage control
HC 36/24
36 × 24 mm. for flush mounting.
For AC or DC measuring voltage
Synchronous motor (AC version)
HC 48
48 × 48 mm.
IP40 or IP65
Adapter frames: 55 × 55 mm, 72 × 72 mm. for panel mounting
KBU
Primary current: 100 to 5,000 A
Secondary current: 5 or 1 A
Burden: 1.25 to 30 VA
KSU & SUSK
Primary current: 1 or 5 A
Secondary current: 5 or 1 A
Accuracy class/protection class: 0.5 or 1.0
LMR-111D
Vector shift
Detection of vector shift
ANSI code 78
LMR-122D
Vector shift and df/dt (ROCOF)
Detection of vector shift
ANSI code 78
LSQ
3-lamp synchroscope. For indication of phase and voltage accordance
For indication of phase and voltage accordance
DIN standard size: Q96
LSU-112DG
Frequency and power control
Built-in power and frequency transducer
Constant power or isochronous mode
LSU-113DG
Frequency and power control. With -P>
Built-in power and frequency transducer
Constant power or isochronous mode
LSU-114DG
Frequency and power control. With start/stop
Built-in power and frequency transducer
Constant power or isochronous mode
LSU-122DG
Reactive. U and Q control
Built-in power and frequency transducer
Constant power or isochronous mode
MDR-2
Short response time (70 ms)
3-phase current detection on both generator sides
Active adjustment of non-balanced current measurements
MIB 7000
1- or 3-phase TRMS measurements
Voltage inputs 690 L-L AC
Accuracy: 0.5 or 1.0
MIC
3-phase TRMS measurements
Voltage inputs 400 L-L AC
Accuracy: 0.2 or 0.5
MIC-2 MKII
Measures voltage, current/active/reactive and apparent power, frequency, energy kWh/kvarh, PF, THD, demand
For all 2- and 3-phase AC network topologies
Suitable for Power quality analysis
MIC-2 MKII DIN
Measures voltage, current/active/reactive and apparent power, frequency, energy kWh/kvarh, PF, THD, demand
For all 2- and 3-phase AC network topologies
Suitable for Power quality analysis
MIC-2 MKII FCT
Measures voltage, current/active/reactive and apparent power, frequency, energy kWh/kvarh, PF, THD, demand
For 2- and 3-phase AC network topologies
Compatible with DEIF’s FCT flexible current transformers (up to 6,000A measuring range) which are ideal for if space is limited
MIC-2 MKII FCT DIN
Measures voltage, current/active/reactive and apparent power, frequency, energy kWh/kvarh, PF, THD, demand
For 2- and 3-phase AC network topologies
Compatible with DEIF’s FCT flexible current transformers (up to 6,000A measuring range) which are ideal for if space is limited
MTR-3
Suitable for all 1- and 3-phase network topologies
Up to 1000 VL-L AC input
Accuracy class: 0.5 or 0.4
MTR-3 Wind
Suitable for all 1- and 3-phase network topologies
Up to 1000VL-L AC input
Accuracy class: 0.5 or 0.3
MTR-4
Suitable for all 1- and 3-phase network topologies
Up to 1,000 VL-L AC input
Accuracy class: 0.5 or 0.4
MTR-4P
Up to 1,000 V L-L AC voltage input
Up to 20 A AC current input
Accuracy class: 0.5
MVR-200 series
Three phase overcurrent protection stages INST, DT or IDMT
(Sensitive) Earth-fault protection stages INST, DT or IDMT
Harmonic overcurrent protection / inrush blocking stages INST, DT or IDMT
NEQ
Simple and thoroughly tested synchronisation supervision
Easy-to-read scale
DIN standard sizes: Q72 and Q96
PHQ
PIR25
Power supply
Power Boost function
Low voltage detection output
Side-by-side mounting
RMT-111Q96
Sequence check (relay)
230 or 400 V AC, 47 to 63 Hz
Continuous operation
RMV-112D
Under- and over-voltage.
U>: 100 to 120 %, U<: 80 to 100 %.
Under-voltage/over-voltage (U< + U>)
RMV-122D
Over-voltage (double).
U>: 100 to 120 %,U>: 100 to 120 %.
Under-voltage/over-voltage (U< + U>)
RMV-132D
Under-voltage (double).
U<: 80 to 100 %, U<: 80 to 100 %.
Under-voltage/over-voltage (U< + U>)
RMV-142D
Under- and Over-voltage.
U>: 100 to 120 %, U<: 80 to 100 %.
Single phase measurement.
RSQ-3
Precision LED synchroscope
LED circle indicates the frequency difference
Galvanically separated
RTA & RTC
Analogue.
2 wire 4 to 20 mA DC.
Ø19mm stainless steel shaft for direct rudder connection.
SASR & SASK
Designed for cables and busbar
Secondary current: 5 or 1 A
Accuracy class/protection class up to 10P10
SCT
Shunt resistors
Dimensions to DIN 43703
Class 0.5
Extensive programme
SIM-Q
SIM-Q MKII
Three functions: Normal, fast and test
Easy set-point
Leakage capacitance up to 2000 uF
TAC-311DG
TAC-321DG
TAS-311DG
Factory-configured transducer for voltage, current, frequency or phase angle measurement
Aux supply: from 57 to 690 V AC
Aux supply: 24 to 220 V DC
TAS-321DG
Factory-configured transducer for bidirectional current measurement.
Aux supply: from 57 to 690 V AC
Aux supply: 24 to 220 V DC
TAS-331DG
Factory-configured transducer for power or reactive power measurement.
Aux supply: from 57 to 690 V AC
Aux supply: 24 to 220 V DC
TAV-311DG
TAV-321DG
TDG-210DG
Converting one type of DC signal into another DC signal
Converting potentiometer input into a DC signal
Separating a number of earthing points
TRI-2
Analogue input
3 extra large, easy-to-read scales
Readable from up to 5 meters
USW-3
Graphical tool for plant single line diagram
Set controller parameters and configure advanced logic
Configure controller I/O and external I/O equipment
WAU 100
NMEA0183 input
1 channel for MWV (wind)
1 channel for UTC time (ZDA or RMC)
Easy installation, simple wiring
Touch screen
WQ
1.5 accuracy class
90 ° and 240 ° pointer deflection
IP52 protection (IP54 on request)
WQR96 MKII, WQR96-x MKII & WQR96-c MKII
Accuracy class 1.0 (EN 62053-21)
For single-phase and 3-phase net-works
Microprocessor-controlled meters with pulse output (SO)
WSDI-2
WSK
Primary current: 1 to 150 A
Secondary current: 5 or 1 A
Burden: 2.5 to 15 VA
WSS & WSS-L
WSS 550
Measures wind speed and direction
IP66 housing
Intelligent heating prevents icing up
WSS 750
Well-suited for dynamic positioning systems
All stainless steel construction
High power ultrasonic transducers in an equalsided triangle constellation
XDi
TFT graphical LED 3.5, 5 or 7" display
Multiple virtual indicator layouts selectable from library
Standard and custom scale designs
XDi-N (navigation)
TFT graphical LED 3.5, 5 or 7" display
Two CAN ports with CANopen and XDi-net
Redundant power inputs
XDi-N (wind)
TFT graphical LED 3.5, 5 or 7" display
96, 144 or 192 DIN cutouts
Two CAN ports for easy interfacing
XL
High shock/vibration resistance (robust)
Class 0.5 accuracy
360 ° deflection
PPM 300 Genset controller
Engine and Generator protection
Engine CANbus
Generator breaker control
PPM 300 Emergency genset controller
Engine and Generator protection
Engine CANbus
Generator breaker control
PPM 300 Shaft generator controller
Generator breaker control
Generator control and protection
Graphical based easy-to-use plant layout
PPM 300 Shore connection controller
Shore connection breaker control
Shore connection protection
Graphical based easy-to-use plant layout
PPM 300 Bus tie breaker controller
Bus tie breaker control
AC protection
Synchronization
PPM 300 Hybrid controller
Inverter AC protection
Inverter AC breaker control
Graphical based easy-to-use plant layout
PPU 300 Standard controller
Diesel Generator controller
Engine and Generator protection
Engine CANbus
PPU 300 Standard controller with CODESYS
Diesel Generator controller
Engine and Generator protection
Engine CANbus
PPU 300 Hybrid (battery) controller
Inverter control and monitoring, battery management system monitoring
Charging
Discharging
AGC 150 Engine Drive Marine
AGC 150 Generator Marine
WQ2R96 MKII
MIB 8000
1- or 3-phase TRMS measurements
Voltage inputs 690 L-L AC
Accuracy: 0.2 to 1.0, see datasheet
CODESYS
CODESYS-based (compliant with other PLCs. Programmes based on CODESYS V2)
Integrated HMI/Web visualisation
Graphical PLC configuration
CODESYS External C lib package
Windows XP, 7 or later
AWC 500 CODESYS development package
AWC 500 C/C++ development package
D45, E45 & B45
DIN rail mounting
Class 1.5
90 ° pointer deflection
DCP2 (24V)
Automatic and electronic protection features
Automatic restart after fault conditions
Automatic output power derating for high ambient temperatures
DPS-1
Switch mode power technology
Temperature range -40°C to +70°C
Both AC and DC input
DQ & VDQ
Accuracy class: 1.5
90 ° or 240 ° pointer deflection
IP52 protection (IP54 on request)
Eclipse
Open development environment
One-click target-built and upload
Debugging
FCT
The flexible current transformer is designed for easy integration in a variety of applications and systems
Ideal for power quality monitoring
≤ 1% Maximum measurements error (of final range value). MIC-2 MKII FCT and MIC-2 MKII FCT DIN including flexible current transformer
FQ & FTQ
Q72 and Q96
90 ° movement pointer
Exchangeable scale
IMD 100
Position, speed and torque control
Static and dynamic current limit
Distributed I/O over CAN Bus
KBU
Primary current: 100 to 5,000 A
Secondary current: 5 or 1 A
Burden: 1.25 to 30 VA
KSU & SUSK
Primary current: 1 or 5 A
Secondary current: 5 or 1 A
Accuracy class/protection class: 0.5 or 1.0
MIB 7000
1- or 3-phase TRMS measurements
Voltage inputs 690 L-L AC
Accuracy: 0.5 or 1.0
MIC
3-phase TRMS measurements
Voltage inputs 400 L-L AC
Accuracy: 0.2 or 0.5
MIC-2 MKII
Measures voltage, current/active/reactive and apparent power, frequency, energy kWh/kvarh, PF, THD, demand
For all 2- and 3-phase AC network topologies
Suitable for Power quality analysis
MIC-2 MKII DIN
Measures voltage, current/active/reactive and apparent power, frequency, energy kWh/kvarh, PF, THD, demand
For all 2- and 3-phase AC network topologies
Suitable for Power quality analysis
MIC-2 MKII FCT
Measures voltage, current/active/reactive and apparent power, frequency, energy kWh/kvarh, PF, THD, demand
For 2- and 3-phase AC network topologies
Compatible with DEIF’s FCT flexible current transformers (up to 6,000A measuring range) which are ideal for if space is limited
MIC-2 MKII FCT DIN
Measures voltage, current/active/reactive and apparent power, frequency, energy kWh/kvarh, PF, THD, demand
For 2- and 3-phase AC network topologies
Compatible with DEIF’s FCT flexible current transformers (up to 6,000A measuring range) which are ideal for if space is limited
MTR-3
Suitable for all 1- and 3-phase network topologies
Up to 1000 VL-L AC input
Accuracy class: 0.5 or 0.4
MTR-3 Wind
Suitable for all 1- and 3-phase network topologies
Up to 1000VL-L AC input
Accuracy class: 0.5 or 0.3
MTR-4P
Up to 1,000 V L-L AC voltage input
Up to 20 A AC current input
Accuracy class: 0.5
MVR-200 series
Three phase overcurrent protection stages INST, DT or IDMT
(Sensitive) Earth-fault protection stages INST, DT or IDMT
Harmonic overcurrent protection / inrush blocking stages INST, DT or IDMT
NEQ
Simple and thoroughly tested synchronisation supervision
Easy-to-read scale
DIN standard sizes: Q72 and Q96
PBC-2
Simple interface
Operational temperature : -25°C to +65°C
Convection cooled, no fan
PCM5٠1
50 W power supply with redundant inputs and 50 ms power fail protection. Input range: 18…36 V
1 × digital relay output: 24 V, maximum 1 A resistive
1 × digital input 9…36 V
PLC Link
Translate Simulink models and Stateflow charts automatically into IEC 61131-3 structured text (ST), ANSI C and Pascal (DELPHI)
Build stand-alone applications and download directly to your PLC or generate code for implementation into existing PLC projects
Make you own code intergration, test systems, 3rd party system interfacing, code wrapping and many others with the Plugin Interface allowing custom user interaction with PLC Link.
PMC
Individual blade pitch control/pitch SW
RS485/CAN/Profibus interface for nacelle communication
I/O for control and safety functions
Power supply
Power Boost function
Low voltage detection output
Side-by-side mounting
RMC-111D
Short circuit relay (I>>)
ANSI code 50 and 51
Measurement of 3-phase currents
RMC-121D
Short circuit and over-current circuit relay (I> + I>>)
ANSI code 50 and 51
Measurement of 3-phase currents
RMC-122D
Short circuit and over-current
I>>: 100 to 400 %, I>: 50 to 150 %
Combined functionality
RMC-131D
Differential current relay
ANSI code 87
Measurement of 3-phase currents
RMC-132D
Double over-current relay (I> + I>)
ANSI code 50 and 51
Measurement of 3-phase currents
RMC-142D
Earth fault protection at two levels
Built-in filter for 3rd harmonic
LED indication of fault condition
RMF-112D
Combined under-frequency/over-frequency
For 1- and 3-phase networks
LED indication of fault condition
RMP-111D
Generator and prime mover protection
ANSI code 32
3-phase measurement
RMP-112D
Generator and prime mover protection
ANSI code 32
3-phase measurement
RMP-121D
Generator and prime mover protection
ANSI code 32
3-phase measurement
RMT-111Q96
Sequence check (relay)
230 or 400 V AC, 47 to 63 Hz
Continuous operation
RMV-112D
Under- and over-voltage.
U>: 100 to 120 %, U<: 80 to 100 %.
Under-voltage/over-voltage (U< + U>)
RMV-122D
Over-voltage (double).
U>: 100 to 120 %,U>: 100 to 120 %.
Under-voltage/over-voltage (U< + U>)
RMV-132D
Under-voltage (double).
U<: 80 to 100 %, U<: 80 to 100 %.
Under-voltage/over-voltage (U< + U>)
RMV-142D
Under- and Over-voltage.
U>: 100 to 120 %, U<: 80 to 100 %.
Single phase measurement.
RSQ-3
Precision LED synchroscope
LED circle indicates the frequency difference
Galvanically separated
SASR & SASK
Designed for cables and busbar
Secondary current: 5 or 1 A
Accuracy class/protection class up to 10P10
Shunt resistors
Dimensions to DIN 43703
Class 0.5
Extensive programme
TAS-311DG
Factory-configured transducer for voltage, current, frequency or phase angle measurement
Aux supply: from 57 to 690 V AC
Aux supply: 24 to 220 V DC
TAS-321DG
Factory-configured transducer for bidirectional current measurement.
Aux supply: from 57 to 690 V AC
Aux supply: 24 to 220 V DC
TAS-331DG
Factory-configured transducer for power or reactive power measurement.
Aux supply: from 57 to 690 V AC
Aux supply: 24 to 220 V DC
TCM-2
Operating temperature -25...70oC
Vibration DNV class A+C
110V AC to 690V AC
WAU 100
NMEA0183 input
1 channel for MWV (wind)
1 channel for UTC time (ZDA or RMC)
Easy installation, simple wiring
Touch screen
WQ
1.5 accuracy class
90 ° and 240 ° pointer deflection
IP52 protection (IP54 on request)
WQR96 MKII, WQR96-x MKII & WQR96-c MKII
Accuracy class 1.0 (EN 62053-21)
For single-phase and 3-phase net-works
Microprocessor-controlled meters with pulse output (SO)
WSK
Primary current: 1 to 150 A
Secondary current: 5 or 1 A
Burden: 2.5 to 15 VA
WSS 550
Measures wind speed and direction
IP66 housing
Intelligent heating prevents icing up
WSS 750
Well-suited for dynamic positioning systems
All stainless steel construction
High power ultrasonic transducers in an equalsided triangle constellation
WSS REC
Measures wind speed and direction – up to 60m/s
Waterproof IP66 housing
Intelligent heating prevents icing
ASC-4 Wind
Microgrid Wind power integration
Off-grid or Grid-tied applications
Maxising Wind power penetration
WQ2R96 MKII
MIB 8000
1- or 3-phase TRMS measurements
Voltage inputs 690 L-L AC
Accuracy: 0.2 to 1.0, see datasheet
dienelectrics@gmail.com
0909186879 
