Automation
JUMO SVS3000
Visualization software
Base model: 700755
Sampling rate 0.7 to 2 seconds
Group pictures
Data export to ASCII
JUMO mTRON T
Central processing unit for measuring, control, and automation system
Base model: 705001
9 program generators
OPC server (CODESYS V3.5)
PLC according to IEC 61131-3
JUMO variTRON 500
Central processing unit for an automation system
Base model: 705002
State-of-the-art interfaces such as OPC UA, MQTT
EtherCAT, Modbus-TCP/RTU
800 MHz quad-core processor
Multichannel controller module
Module for automation system
Base model: 705010
2 digital inputs DC 0/24 V
Counter input up to 10 kHz
2 digital outputs as a relay
Relay module 4-channel
Module for automation system
Base model: 705015
4 relay outputs
Changeover contact AC 230 V; 3 A
Ambient temperature: -20 to +55 °C
Module for automation system
Analog input module 4-channel
Base model: 705020
4 universal analog inputs
16-bit A/D converter
1 digital input DC 0/24 V
Analog input module 8-channel
Module for automation system
Base model: 705021
8 analog inputs
16-bit A/D converter
1 digital input DC 0/24 V
Analog output module 4-channel
Module for automation system
Base model: 705025
4 analog outputs (user configurable)
0(2) to 10 V; 0(4) to 20 mA output
Ambient temperature: -20 to +55 °C
Digital input/output module 12-channel
Module for automation system
Base model: 705030
12 digital inputs or outputs
Input signal: DC 0/24 V
Output signal: DC 0/24 V; max. 500 mA
Digital input/output module 32-channel
Module for JUMO variTRON automation system
Base model: 705031
32 channels, thereof 17 digital outputs
up to 15 additional inputs or outputs
Signals: DC 0/24 V; Output: max. 500 mA
Router module
Module for measuring, control, and automation system JUMO mTRON T
Base model: 705040
3 system bus connections
Galvanically isolated interfaces
Voltage supply output
Router module 2-port
Module for automation system JUMO variTRON
Base model: 705041
2 system bus connections
Galvanically isolated interfaces
Voltage supply output
Router module 3-port
Module for automation system JUMO variTRON
Base model: 705042
3 system bus connections
Galvanically isolated interfaces
Voltage supply output
Multifunction panel 840
For measuring, control, and automation system JUMO mTRON T
Base model: 705060
2 serial interfaces
2 RJ45 system bus connections
IP67 protection on front
Operating panels
For measuring, control, and automation system JUMO mTRON T
Base model: 705065
Ethernet interface
3.5", 5.7", and 10.4" TFT color screens
IP65 protection on front
Web panels
For automation system JUMO vari TRON
Base model: 705070
up to 3 Ethernet interfaces
TFT-touchscreens 4.3 to 21.5 inch
Protection class on front: IP54 to IP69
Power supply units
Module for automation system
Base model: 705090
150 % load capacity
AC 100 to 240 V wide-range input
Efficiency up to 93.5 %
JUMO thermoCOR
Portable measuring system for AMS2750 and CQI-9
Base model: 987050
12 thermocouple inputs
4 universal inputs
Simple operation via color touchscreen
Paperless recorders
JUMO LOGOSCREEN 600
Paperless recorder with touchscreen
Base model: 706520
Max. 6 analog and max. 12 digital inputs
Max. 12 digital inputs/outputs
Batch report recording
JUMO LOGOSCREEN 601
Paperless recorder with touchscreen
Base model: 706521
Max. 6 analog and max. 6 digital inputs
Max. 12 digital inputs/outputs
Batch report recording
JUMO LOGOSCREEN 700
Highly scalable paperless recorder
Base model: 706530
Max. 18 analog inputs and max. 18 digital inputs
Max. 24 digital inputs/outputs
Up to 5 batch reports at the same time
JUMO LOGOSCREEN nt
Paperless recorder
Base model: 706581
Max. 18 analog inputs, max. 24 digital inputs
Max. 24 digital inputs/outputs
Up to 3 batch reports at the same time
JUMO LOGOSCREEN fd
Data management and FDA-compliant measured data acquisition
Base model: 706585
Max. 18 analog inputs, max. 24 digital inputs
Max. 24 digital inputs/outputs
Up to 3 batch reports at the same time
JUMO thermoCOR
Portable measuring system for AMS2750 and CQI-9
Base model: 987050
12 thermocouple inputs
4 universal inputs
Simple operation via color touchscreen
Digital indicators
JUMO diraVIEW 104/108/116/132
Digital indicator
Base model: 701510
One universal analog input
Galvanic isolation 3000 V
5 DIN formats (size)
JUMO di eco
Digital indicator
Base model: 701540
Different measurement inputs can be chosen from
No galvanic isolation
Size: 76 × 36 mm
JUMO di 308
Digital indicator
Base model: 701550
Up to 2 universal analog inputs
Galvanic isolation 500 V
Size: 96 × 48 mm
JUMO TDA-300 and JUMO TDA-3000
Handheld thermometer
Base model: 702540
Replaceable probes
RTD temperature probe and thermocouples
Battery operating life 400 hours
Precision indicating device
Test equipment for temperature and its traceability
Base model: 902722
Precision indicating device
RTD temperature probe / thermocouple
Measuring range: -200 to +1200 °C
Transmitters
JUMO dTRANS T01
Two-wire transmitter
Base model: 707010
Pt100 internal
Sampling rate: > 1 measurement per second
Output signal 4 to 20 mA
JUMO dTRANS T02
Four-wire transmitter
Base model: 707020
Sampling rate: > 1 measurement per second
Two-wire, three-wire, or four-wire circuit
Output 0/4 to 20 mA
JUMO dTRANS T03
Two-wire or three-wire transmitter
Base model: 707030
Smallest measuring span 25 Kelvin
Two-wire, 4 to 20 mA, three-wire, 0 to 10 V
Pt100 (two-wire, three-wire connection)
JUMO dTRANS T04
Four-wire transmitter
Base model: 707040
Output 4 to 20 mA, 0 to 10 V
Design width 22.5 mm
Pt100, Pt1000, potentiometer
JUMO dTRANS T05
Programmable transmitter in two-wire technology
Base model: 707050
Output signal 4 to 20 mA/0 to 10 V
Temp in °C or °F
Voltage signals -100- 1100 mV
JUMO Wtrans B
Head transmitter with wireless data transmission
Base model: 707060
Radio frequency 868.4 MHz
Transmission interval (1 to 3600 s)
Range up to 300 m
JUMO dTRANS T06 Junior
Multifunctional four-wire transmitter in mounting rail case
Base model: 707070
1 universal input
Small size 17.5 mm
High level of galvanic isolation
JUMO dTRANS T06
Multifunctional four-wire transmitter in mounting rail case
Base model: 707071
1 universal measurement input
RS485 interface Modbus-RTU
SIL 2/SIL 3 according to DIN EN 61508
JUMO dTRANS T06 Ex
Multifunctional four-wire transmitter in mounting rail case with SIL and Ex approval
Base model: 707075
1 universal measurement input
RS485 interface with Modbus RTU
SIL 2/SIL 3 according to DIN EN 61508
JUMO dTRANS T07
Two-channel temperature transmitter with HART®/Ex/SIL
Base model: 707080
2 universal measuring inputs
HART® 7 protocol
SIL 2/3 hardware/software
JUMO dTRANS T09
Cable transmitter for temperature
Base model: 707090
For Pt100 or Pt1000
M12 connection on both sides
Output: 4 to 20 mA or IO-Link
JUMO dTRANS T08 xx
Temperature transmitter series 6 mm
Base model: 707101
Ambient temperature: -25 to 70 °C
Selectable response time < 30 ms/300 ms
Low power consumption: <0.65 to 1.2 W
JUMO dTRANS S08 xx
Signal and isolating converter – 6 mm series
Base model: 707203
Ambient temperature: -25 to 70 °C
Response time <7 ms
Power consumption <0.65 to 1.2 W
Power supply unit
For temperature transmitters
Base model: 707500
Design width 22.5, 30, 45, 75 mm
Output DC 24 V
DIN, G-rail
JUMO Ex-i repeater power supply and input isolating amplifier
For intrinsically safe [Ex i] transmitters
Base model: 707530
Analog 0/4-20 mA measured values
Supply 24 V to 230 V
Galvanic three-way isolation
JUMO Wtrans receiver
Universal receiver for JUMO wireless measuring probes
Base model: 902931
Signals (0(4)-20 mA, 0-10 V)
RS485 interface
Open air range 300 m
Platinum temperature sensors
Platinum-chip temperature sensors
With connection wires according to DIN EN 60751 (PCA design type)
Base model: 906121
Temp.: -70 to +600 °C
Pt100, Pt500, and Pt1000
Affordable
Platinum-chip temperature sensors
In SMD design type on epoxy PCB according to DIN EN 60751 (PCSE / PCSM design type)
Base model: 906122
Temp.: -20 to +150 °C
Pt100, Pt500, and Pt1000
Price benefit of SMD sensors
Platinum-chip temperature sensors
With terminal clamps according to DIN EN 60751 (PCKL design type)
Base model: 906123
Temp.: -30 to +105 °C
Pt100 or Pt1000
Protection against moisture and condensation
Platinum-chip temperature sensors
In SMD design type according to DIN EN 60751 (PCS design type)
Base model: 906125
Temp.: -50 to +150 °C (-70 to 250 °C)
Pt100, Pt500, Pt1000
Not to be used unprotected in humid ambient conditions
Controllers
Panel-mounted thermostat
EM series to 500 °CBase model: 602021
Material: stainless steel/copper
Max. capillary: 5000 mm
Control range: up to 500 °C
Panel-mounted thermostats
EM series up to 650 °CBase model: 602025
Material: stainless steel
Max. capillary: 3000 mm
Control range: up to 650 °C
Panel-mounted thermostat
EM seriesBase model: 602026
Material: stainless steel
Max. capillary: 5000 mm
Control range: up to 300 °C
JUMO heatTHERM
Panel-mounted thermostatBase model: 602031
Max. switching capacity 16 A, 230 V
Max. capillary: 2000 mm
Control range: up to 350 °C
JUMO heatTHERM P100
Panel-mounted thermostatBase model: 602051
Material: copper
Max. capillary: 2000 mm
Control range: 30 to 120 °C
JUMO heatTHERM P300
3-phase panel-mounted thermostatBase model: 602090
Max. switching capacity 30 A, 480 V
Max. capillary length 1000 mm
Max. control range up to 365 °C
Surface-mounted single thermostats
ATH seriesBase model: 603021
Material: stainless steel/copper
Max. capillary: 5000 mm
Max. control range: 20 to 500 °C
Surface-mounted double thermostat
ATH seriesBase model: 603026
Material: stainless steel/copper
Max. capillary: 5000 mm
Max. control range: 20 to 500 °C
Surface-mounted thermostats
AMTHF seriesBase model: 603051
Material: stainless steel/copper
Max. capillary: 5000 mm
Max. control range: 50 to 300 °C
JUMO heatTHERM-AT and DR
Surface-mounted thermostatBase model: 603070
Switching point with rotary knob
Surface-mounted thermostat or DIN-rail thermostat
Max. control range up to 350 °C
JUMO frostTHERM-ATE
Electronic frost protection thermostatBase model: 604170
Max. probe line length 6000 m
Control range: 1 to 10 °C
Protection type IP42
Contact dial thermometers
For temperature controlBase model: 608425
Max. case size: ø 160 mm
Measurement range: -40 to +450 °C
Max. switching capacity: 50 VA/30 W
MICROSTAT-M
Temperature controllerBase model: 608501
Max. case size: ø 100 mm
Measuring range: -40 to +600 °C
Max. switching capacity: AC 230 V, 10 A
Contact dial thermometer
For temperature controlBase model: 608520
Max. case size: ø 100 mm
Measuring range: -30 to +500 °C
With 1 or 2 microswitches
Contact dial thermometer
For temperature controlBase model: 608523
Max. case size: ø 100 mm
Measuring range: -30 to +500 °C
Max. switching capacity: AC 230 V, 10 A
JUMO dicoTEMP 800
Dial thermometer with microswitchBase model: 608530
Max. case size: Ø 80 mm
Measuring range: 20 to 270 °C
Max. switching capacity: AC 230 V, 10 A
Contact dial thermometer
For temperature controlBase model: 608540
Max. case size: ø 80 mm
Measuring range: -30 to +500 °C
Max. switching capacity: AC 230 V, 10 A
JUMO IMAGO F3000
Process control for the meat processing industryBase model: 700101
4 control channels
5" color screen
315 × 171/171 × 315 mm formats
JUMO LR 316
Laboratory controller in desktop caseBase model: 700703
Desktop case
AC 50 Hz, 230 V
Pt100, Pt1000, Fe-CuNi "L", NiCr-Ni "K"
JUMO exTHERM-DR
Two-state controller with [Ex ia] input according to ATEXBase model: 701055
IECEx, ATEX
Controller output (relay)
Limit value output for alarm indication
JUMO eTRON M100
Electronic cooling controllerBase model: 701061
Pt100 two-wire, Pt1000 two-wire, KTY2X-6
DIN EN 12830 and DIN EN 13485
HACCP-compliant recording
JUMO eTRON M100
Electronic 2-channel microstatBase model: 701066
RS485 interface
Pt100, Pt1000, KTY1X-6/KTY2X-6
DIN EN 12830 and DIN EN 13485
JUMO Quantrol LC100/LC200/LC300
Universal PID Controller SeriesBase model: 702030
48 × 48 mm, 48 × 96 mm, 96 × 96 mm formats
RS485 interface (Modbus-RTU)
Two-state/three-state/continuous controller
JUMO iTRON DR 100
Compact controllerBase model: 702060
Mounting on DIN rail, 35 mm
Two-state/three-state controller
Design width 22.5 mm
Topseller
JUMO diraTRON
Compact controllerBase model: 702110
1 control channel
Display of individual texts
Service counter
JUMO dTRON 304/308/316
Compact controller with program functionBase model: 703041
4 limit value monitoring functions
Inputs/outputs can be expanded
Formats: 48 × 48 – 96 × 96 mm
JUMO dTRON 304/308/316 plast
Compact controller for the plastics industryBase model: 703046
Formats: 48 × 48 mm, 48 × 96 mm, 96 × 96 mm
PROFIBUS DP interface
Modbus master/slave interface
JUMO DICON touch
Two-channel/Four-channel process and program controllerBase model: 703571
Cascade control
Modbus master TCP/RTU
Up to 4 analog inputs
JUMO IMAGO 500
Multichannel process and program controllerBase model: 703590
Up to 8 control channels and 4 program channels
Up to 4 cascade controllers
50 programs with 100 sections
Switches
Bimetal temperature switch
For local temperature monitoring
Base model: 608301
Temp.: 0 to 140 °C
Normally closed contact or normally open contact
Switching capacity up to 10 A
JUMO DELOS T
Electronic temperature switch with display and analog output
Base model: 902940
Temp.: -50 to +260 °C (+500 °C)
M12 × 1 plug connection
Hygienic process connection
Thermocouples
JUMO TDA-300 and JUMO TDA-3000
Handheld thermometer
Base model: 702540
Replaceable probes
RTD temperature probe and thermocouples
Battery operating life 400 hours
Screw-in thermocouples
With terminal head form B
Base model: 901020
Temp.: -200 to +800 °C
Insertion length 160 to 600 mm
Thermocouples type J, K, and L
Screw-in thermocouples
With terminal head form J
Base model: 901030
Temp.: -200 to +800 °C
Insertion length 50 to 300 mm
Thermocouples type J, K, and L
Screw-in thermocouples
With compensating cable
Base model: 901050
Temp.: -200 to +600 °C
Stainless steel 1.4571
Thermocouples type K and L
Thermocouples
For devices and plants tested according to DIN EN 14597
Base model: 901060
Temp.: -35 to +1500 °C
Stainless steel 1.4571
Thermocouples type B, K, L, and S
Screw-in melt thermocouples
With sharp or flat probe tips
Base model: 901090
Temp.: -40 to +600 °C
Ceramic insulated probe tip
Thermocouples type J, K, and L
Push-in thermocouples
With form A terminal head
Base model: 901110
Temp.: -200 to +1600 °C
Protection tube diameter 15 or 22 mm
Thermocouples type B, J, K, L, and S
Push-in thermocouples
With terminal head form B
Base model: 901120
Temp.: -200 to +1200 °C
Insertion length 100 to 960 mm
Thermocouples type B, J, K, L, and S
Push-in thermocouples
With compensating cable
Base model: 901150
Temp.: -50 to +600 °C
Stainless steel 1.4571
Thermocouples type J, K, and L
Push-in thermocouples
With bayonet fastener
Base model: 901190
Temp.: 0 to 400 °C
Compensating cable Silicone/PTFE/metal braiding
Thermocouples type J, K, and L
Mineral-insulated thermocouples
According to DIN 43710 and DIN EN 60584 with bare connection wires
Base model: 901210
Temp.: -200 to +1200 °C
Thermocouples type J, K, L, N
Response time: t0.5 from 0.15 s
Mineral-insulated thermocouples
According to DIN 43710 and DIN EN 60584 with terminal head form B
Base model: 901220
Temp.: -200 to +1200 °C
With terminal head B
Response time: t0.5 from 0.15 s
Mineral-insulated thermocouples
According to DIN 43710 and DIN EN 60584 with terminal head form J
Base model: 901230
Temp.: -200 to +1200 °C
With terminal head J
Response time: t0.5 from 0.15 s
Mineral-insulated thermocouples
According to DIN 43710 and DIN EN 60584 with standard tab connector
Base model: 901240
Temp.: -200 to +1200 °C
With standard tab connector
Response time: t0.5 from 0.15 s
Mineral-insulated thermocouples
According to DIN 43710 and DIN EN 60584 with compensating cable
Base model: 901250
Temp.: -200 to +1200 °C
Thermocouples J, K, L
Response time: t0.5 from 0.15 s
JUMO FOODtemp
Food insertion thermocouples
Base model: 901350
Temp.: -100 to +260 °C
Suitable for the food industry
Thermocouple type K
Precision indicating device
Test equipment for temperature and its traceability
Base model: 902722
Precision indicating device
RTD temperature probe / thermocouple
Measuring range: -200 to +1200 °C
Thermostats
Exhaust gas temperature monitor
Type STM-RW-2
Base model: 601540
AC 230 V +10 %
Protection tube: 15 × 150 mm, steel
Limit value range: 40 to 120 °C
Panel-mounted thermostats
ETH series
Base model: 602010
Material: stainless steel/copper
Max. capillary: 5000 mm
Limit value range: 50 to 300 °C
Panel-mounted thermostat
EM series to 500 °C
Base model: 602021
Material: stainless steel/copper
Max. capillary: 5000 mm
Control range: up to 500 °C
Panel-mounted thermostats
EM series up to 650 °C
Base model: 602025
Material: stainless steel
Max. capillary: 3000 mm
Control range: up to 650 °C
Panel-mounted thermostat
EM series
Base model: 602026
Material: stainless steel
Max. capillary: 5000 mm
Control range: up to 300 °C
JUMO heatTHERM
Panel-mounted thermostat
Base model: 602031
Max. switching capacity 16 A, 230 V
Max. capillary: 2000 mm
Control range: up to 350 °C
JUMO heatTHERM P100
Panel-mounted thermostat
Base model: 602051
Material: copper
Max. capillary: 2000 mm
Control range: 30 to 120 °C
JUMO heatTHERM P300
3-phase panel-mounted thermostat
Base model: 602090
Max. switching capacity 30 A, 480 V
Max. capillary length 1000 mm
Max. control range up to 365 °C
Surface-mounted single thermostats
ATH series
Base model: 603021
Material: stainless steel/copper
Max. capillary: 5000 mm
Max. control range: 20 to 500 °C
Surface-mounted double thermostat
ATH series
Base model: 603026
Material: stainless steel/copper
Max. capillary: 5000 mm
Max. control range: 20 to 500 °C
Surface-mounted thermostats
ATH.-SE series
Base model: 603031
Max. control range: 50 to 300 °C
Material: stainless steel/copper
Max. capillary: 2000 mm
Surface-mounted single thermostat or surface-mounted double thermostat
ATH-SW series
Base model: 603035
Material: stainless steel/copper
Max. capillary: 5000 mm
Max. control range: 20 to 500 °C
JUMO heatTHERM S600
Surface-mounted double thermostat
Base model: 603045
Material: brass or stainless steel
Max. capillary: 5000 mm
Max. control range 300 °C
Surface-mounted thermostats
AMTHF series
Base model: 603051
Material: stainless steel/copper
Max. capillary: 5000 mm
Max. control range: 50 to 300 °C
JUMO heatTHERM-AT and DR
Surface-mounted thermostat
Base model: 603070
Switching point with rotary knob
Surface-mounted thermostat or DIN-rail thermostat
Max. control range up to 350 °C
JUMO frostTHERM-AT/-DR
Frost protection thermostat
Base model: 604100
Max. probe line length 12000 mm
Control range: -10 to +15 °C
Protection type (AT) up to IP65
JUMO frostTHERM-ATE
Electronic frost protection thermostat
Base model: 604170
Max. probe line length 6000 m
Control range: 1 to 10 °C
Protection type IP42
Hot air thermostats
WTHc series
Base model: 604514
Max. capillary: 1250 mm
Max. control range: 20 to 80 °C
Protection type IP40 or IP54
JUMO exTHERM-AT
Explosion-protected surface-mounted thermostat
Base model: 605055
Max. switching capacity: 25 A
Protection type IP66
Max. control range: 20 to 500 °C
ATEX thermowells
For zone separation 0/1 or 20/21
Base model: 605057
Max. pressure: 54 bar/36 bar
Max. insertion length 300 mm
Max. temp.: 400 °C
JUMO eTRON T
Digital thermostat
Base model: 701050
Design width 22.5 mm
Pt100, Pt1000, KTY2X-6
Therm.: Fe-CuNi "J, L"/NiCr "K"
JUMO eTRON T100
Electronic thermostat
Base model: 701052
Relay (changeover contact 10 A), PhotoMOS® relay
Pt100, Pt1000, KTY2X-6
Thermocouple type J, L, and K
JUMO eTRON M
Electronic microstat
Base model: 701060
Pt100 two-wire, Pt1000 two-wire, KTY2X-6
0(4) to 20 mA
Fe-CuNi "J, L", NiCr-Ni "K"
Monitors & limiters
Exhaust gas temperature monitor
Type STM-RW-2
Base model: 601540
AC 230 V +10 %
Protection tube: 15 × 150 mm, steel
Limit value range: 40 to 120 °C
Panel-mounted thermostats
ETH series
Base model: 602010
Material: stainless steel/copper
Max. capillary: 5000 mm
Limit value range: 50 to 300 °C
Panel-mounted thermostat
EM series to 500 °C
Base model: 602021
Material: stainless steel/copper
Max. capillary: 5000 mm
Control range: up to 500 °C
Panel-mounted thermostats
EM series up to 650 °C
Base model: 602025
Material: stainless steel
Max. capillary: 3000 mm
Control range: up to 650 °C
Panel-mounted thermostat
EM series
Base model: 602026
Material: stainless steel
Max. capillary: 5000 mm
Control range: up to 300 °C
JUMO heatTHERM
Panel-mounted thermostat
Base model: 602031
Max. switching capacity 16 A, 230 V
Max. capillary: 2000 mm
Control range: up to 350 °C
JUMO heatTHERM P300
3-phase panel-mounted thermostat
Base model: 602090
Max. switching capacity 30 A, 480 V
Max. capillary length 1000 mm
Max. control range up to 365 °C
Surface-mounted single thermostats
ATH series
Base model: 603021
Material: stainless steel/copper
Max. capillary: 5000 mm
Max. control range: 20 to 500 °C
Surface-mounted double thermostat
ATH series
Base model: 603026
Material: stainless steel/copper
Max. capillary: 5000 mm
Max. control range: 20 to 500 °C
Surface-mounted thermostats
ATH.-SE series
Base model: 603031
Max. control range: 50 to 300 °C
Material: stainless steel/copper
Max. capillary: 2000 mm
Surface-mounted single thermostat or surface-mounted double thermostat
ATH-SW series
Base model: 603035
Material: stainless steel/copper
Max. capillary: 5000 mm
Max. control range: 20 to 500 °C
JUMO heatTHERM S600
Surface-mounted double thermostat
Base model: 603045
Material: brass or stainless steel
Max. capillary: 5000 mm
Max. control range 300 °C
Surface-mounted thermostats
AMTHF series
Base model: 603051
Material: stainless steel/copper
Max. capillary: 5000 mm
Max. control range: 50 to 300 °C
JUMO heatTHERM-AT and DR
Surface-mounted thermostat
Base model: 603070
Switching point with rotary knob
Surface-mounted thermostat or DIN-rail thermostat
Max. control range up to 350 °C
JUMO frostTHERM-AT/-DR
Frost protection thermostat
Base model: 604100
Max. probe line length 12000 mm
Control range: -10 to +15 °C
Protection type (AT) up to IP65
JUMO frostTHERM-ATE
Electronic frost protection thermostat
Base model: 604170
Max. probe line length 6000 m
Control range: 1 to 10 °C
Protection type IP42
Hot air thermostats
WTHc series
Base model: 604514
Max. capillary: 1250 mm
Max. control range: 20 to 80 °C
Protection type IP40 or IP54
JUMO exTHERM-AT
Explosion-protected surface-mounted thermostat
Base model: 605055
Max. switching capacity: 25 A
Protection type IP66
Max. control range: 20 to 500 °C
JUMO safetyM STB/STW
Safety temperature limiter, safety temperature monitor according to DIN EN 14597
Base model: 701150
AC 110 to 240 V; +10/-15 %; ACDC 20 to 30 V
2 relay outputs
1oo2D architecture
JUMO safetyM STB/STW Ex
Safety temperature limiters and monitors according to DIN EN 14597 and ATEX approval
Base model: 701155
DIN EN14597/ATEX/IECEx/PED/DNVGL/SIL/PL
1oo2D structure
EN 13463 IPL 2
JUMO safetyM TB/TW
Temperature limiter/monitor
Base model: 701160
Temperature up to max. 2495 °C
DIN EN 14597, cULus
Input: Pt100, Pt1000, and thermocouple
JUMO safetyM TB/TW08
Temperature limiter/monitor according to DIN EN 14597
Base model: 701170
2 × Pt100
DIN EN 14597
Protection type on the front IP65
Heat meters
JUMO HEATtemp
Screw-in RTD temperature probe for heat meters with terminal head for direct mounting (type DL)
Base model: 902427
Temp.: 0 to 180 °C
Temperature sensor: Pt100, Pt500, Pt1000
Insertion length 85 to 280 mm
JUMO HEATtemp
Screw-in RTD temperature probes for heat meters with connecting cable for direct mounting (type DS/DL)
Base model: 902428
Temp.: 0 to 180 °C
Sensor: Pt100, Pt500, or Pt1000
Insertion length: 25 to 60 mm/60 to 280 mm
JUMO HEATtemp
Push-in RTD temperature probes for heat meters with terminal head for immersion sleeves (type PL)
Base model: 902437
Temp.: 0 to 180 °C
Temperature sensor: Pt100, Pt500, Pt1000
Insertion length 85 to 400 mm
JUMO HEATtemp
Push-in RTD temperature probe for heat meters with connecting cable for thermowells (type PS/PL)
Base model: 902438
Temp.: 0 to 180 °C
Sensor: Pt100, Pt500, or Pt1000
Insertion length: 45-85 mm / 85-450 mm
Thermowells
for heat meter temperature probes
Base model: 902440
Insertion length 35 or 120 or 400 mm
Max temp.: 105 / 150 / 180 °C
Stainless steel or brass protection tube
Installation locations and accessories
for temperature probes
Base model: 902442
Max. temp.: 150 °C
PN = 16 bar
Accessories: sealing sets, extension socket
JUMO HEATtemp
Screw-in RTD temperature probe for combined cold/heat meters with terminal head for direct mounting (type DL)
Base model: 902454
Temp.: 0 to 120 °C (cold) / 180 °C (heat)
Temperature sensor: Pt100, Pt500, Pt1000
Insertion length 85 to 280 mm
JUMO HEATtemp
Screw-in RTD temperature probe for combined cold and heat meters for direct mounting (type DS/DL)
Base model: 902455
Temp.: 0 to 120 °C (cold) / 180 °C (heat)
Temperature sensor: Pt100, Pt500, Pt1000
Insertion length: 25 to 60 mm / 60 to 210 mm
JUMO HEATtemp
Push-in RTD temperature probes for combined cold and heat meters with terminal head for thermowells (type PL)
Base model: 902464
Temp.: 0 to 120 °C (cold) / 180 °C (heat)
Temperature sensor: Pt100, Pt500, Pt1000
Insertion length: 85 to 400 mm
JUMO HEATtemp
Push-in RTD temperature probes for combined cold and heat meters with connecting cable for thermowells (type PS/PL)
Base model: 902465
Temp. 0 to 150 °C (cold)/180 °C (heat)
Temperature sensor: Pt100, Pt500, Pt1000
Insertion length: 45 to 85 mm/85 to 450 mm
RTD temperature probes
JUMO TDA-300 and JUMO TDA-3000
Handheld thermometer
Base model: 702540
- Replaceable probes
- RTD temperature probe and thermocouples
- Battery operating life 400 hours
Screw-in RTD temperature probe
With terminal head form B
Base model: 902020
Temp.: -50 to +600 °C
Terminal heads BUZ/BUZH/BBK
Temperature sensor Pt100/Pt500/Pt1000
JUMO Etemp B
Screw-in RTD temperature probe with terminal head form B
Base model: 902023
Temperature: -50 to +400 °C
Design type B and BUZ available
Temperature sensor: Pt100
Screw-in RTD temperature probe
With terminal head form J
Base model: 902030
Temp.: -50 to +400 °C
Reliable seal in the event of vacuum and overpressure
Temperature sensor Pt100
JUMO VIBROtemp
Screw-in RTD temperature probe with plug connector
Base model: 902040
Pt100 temperature sensor
Protection type: IP67/IP69
Temp.: -50 to +270 °C
Screw-in RTD temperature probe
With plug connector according to DIN EN 175301
Base model: 902044
Pt100 temperature sensor
Temp.: -50 to +260 °C
Two-wire or four-wire circuit
Screw-in RTD temperature probe
With connecting cableBase model: 902050
Two-wire, three-wire, four-wire
Temp.: -50 to +400 °C
Pt100 temperature sensor
RTD temperature probe
For devices and plants tested according to DIN EN 14597
Base model: 902060
Two-wire as standard
Temperatures up to 700 °C
Pt100 temperature sensor
Screw-in melt RTD temperature probe
For application in the plastics industry
Base model: 902090
Temp.: -50 to +400 °C
Pt100 temperature sensor
Two-wire, three-wire, or four-wire
Push-in RTD temperature probe
With terminal head form B
Base model: 902120
Temp.: -50 to +600 °C
Sensor: Pt100, Pt500, or Pt1000
Two-wire, three-wire, or four-wire
JUMO Etemp B
Push-in RTD temperature probe with terminal head (form B) for standard applications
Base model: 902123
Temp.: -50 to +400 °C
Terminal head B or BUZ
Sensor: Pt100, Pt500, or Pt1000
Push-in RTD temperature probe
With terminal head form J
Base model: 902130
Temp.: -50 to +400 °C
Protection tube, continuous or stepped down
Pt100 temperature sensor
Push-in RTD temperature probe
With connecting cable
Base model: 902150
Temp.: -50 to +400 °C
Sensor Pt100, Pt500, or Pt1000
Optionally with bend protection
Push-in RTD temperature probe
With connecting cable for solar thermal systems
Base model: 902153
Temp.: -50 to +260 °C
Pt1000 temperature sensor
Response time: 0.4 m/s
Push-in RTD temperature probe
With bayonet fastener
Base model: 902190
Temp.: -50 to +400 °C
Insertion length 20 to 190 mm
Pt100 temperature sensors
Mineral-insulated RTD temperature probe
With bare connection wires according to DIN EN 60751
Base model: 902210
Temp.: -50 (-200) to +600 °C
Temperature sensor: Pt100 or Pt1000
Response time: t0.5 from 0.7 s
Mineral-insulated RTD temperature probe
With terminal head form B according to DIN EN 60751
Base model: 902220
Temp.: -50 (-200) to +600 °C
Pt100 temperature sensor
Response time: t0.5 from 0.7 s
Mineral-insulated RTD temperature probe
With terminal head form J according to DIN EN 60751
Base model: 902230
Temp.: -50 (-200) to +600 °C
Pt100 temperature sensor
Response time: t0.5 from 0.7 s
Mineral-insulated RTD temperature probe
With LEMO coupling according to DIN EN 6075
Base model: 902240
Temp.: -50 (-200) to +600 °C
Temperature sensor: Pt100 or Pt1000
Response time: t0.5 from 0.7 s
Mineral-insulated RTD temperature probe
With connecting cable according to DIN EN 60751
Base model: 902250
Temp.: -50 (-200) to +600 °C
Temperature sensor: Pt100 or Pt1000
Response time: t0.5 from 0.7 s
JUMO FOODtemp
Food insertion RTD temperature probe
Base model: 902350
Temp.: -50 to +260 °C
Pt100 temperature sensor
Two-wire/three-wire circuit as a standard feature
JUMO HEATtemp
Screw-in RTD temperature probe for heat meters with terminal head for direct mounting (type DL)
Base model: 902427
Temp.: 0 to 180 °C
Temperature sensor: Pt100, Pt500, Pt1000
Insertion length 85 to 280 mm
JUMO HEATtemp
Screw-in RTD temperature probes for heat meters with connecting cable for direct mounting (type DS/DL)
Base model: 902428
Temp.: 0 to 180 °C
Sensor: Pt100, Pt500, or Pt1000
Insertion length: 25 to 60 mm/60 to 280 mm
JUMO HEATtemp
Push-in RTD temperature probes for heat meters with terminal head for immersion sleeves (type PL)Base model: 902437
Temp.: 0 to 180 °C
Temperature sensor: Pt100, Pt500, Pt1000
Insertion length 85 to 400 mm
JUMO HEATtemp
Push-in RTD temperature probe for heat meters with connecting cable for thermowells (type PS/PL)
Base model: 902438
Temp.: 0 to 180 °C
Sensor: Pt100, Pt500, or Pt1000
Insertion length: 45-85 mm / 85-450 mm
JUMO HEATtemp
Screw-in RTD temperature probe for combined cold/heat meters with terminal head for direct mounting (type DL)
Base model: 902454
Temp.: 0 to 120 °C (cold) / 180 °C (heat)
Temperature sensor: Pt100, Pt500, Pt1000
Insertion length 85 to 280 mm
JUMO HEATtemp
Screw-in RTD temperature probe for combined cold and heat meters for direct mounting (type DS/DL)
Base model: 902455
Temp.: 0 to 120 °C (cold) / 180 °C (heat)
Temperature sensor: Pt100, Pt500, Pt1000
Insertion length: 25 to 60 mm / 60 to 210 mm
JUMO HEATtemp
Push-in RTD temperature probes for combined cold and heat meters with terminal head for thermowells (type PL)
Base model: 902464
Temp.: 0 to 120 °C (cold) / 180 °C (heat)
Temperature sensor: Pt100, Pt500, Pt1000
Insertion length: 85 to 400 mm
RTD temperature probes
for indoors, walls and outside
Base model: 902520
Temp.: -50 to +90 °C
Protection type IP20 to IP65
Sensor: Pt100, Pt1000, or Ni1000
RTD temperature probes
for channel mounting
Base model: 902524
Insertion length 50 to 500 mm
Sensor: Pt100, Pt1000, Ni1000, amongst others
Temp.: -50 to +200 °C
Surface RTD temperature probes
with connecting cable
Base model: 902550
Two-wire or three-wire circuit
Sensor Pt100, Pt500, or Pt1000
Temp.: -50 to +260 °C
Pt100 precision RTD temperature probe
Test equipment for temperature and its traceability
Base model: 902721
Pt100 ceramic temperature sensor
Silicone-insulated connecting cable
Temp.: -200 to +450 °C
Precision indicating device
Test equipment for temperature and its traceability
Base model: 902722
Precision indicating device
RTD temperature probe / thermocouple
Measuring range: -200 to +1200 °C
RTD temperature probe
For the food and pharmaceutical industry
Base model: 902810
Stainless steel terminal head
Temp.: -50 to +250 °C
Insertion length 25 to 400 mm
JUMO Dtrans T100
Screw-in RTD temperature probe with/without transmitter
Base model: 902815
Machine connector M12 × 1
ATEX/IECEx version possible
Temp.: -50 to +260 °C
JUMO PROCESStemp
RTD temperature probes for process technology with Ex approval
Base model: 902820
Temp.: -200 to +600 °C
Available with an Ex transmitter
Interchangeable measuring insert
ATEX/IECEx RTD temperature probe
With connecting cable according to DIN EN 60751
Base model: 902821
Temp.: -100 to +600 °C
Temperature sensor: Pt100/Pt1000
Individual design types
JUMO STEAMtemp
Push-in RTD temperature probe (steam-tight)
Base model: 902830
Pt100 temperature sensor
Temp.: -70 to +200 °C
Protection type IP69
JUMO MarineTemp
Screw-in RTD temperature probe for marine applications
Base model: 902850
Temperature: -50 to +400 °C
Pt100 or Pt1000 temperature sensor
Maritime type approval Bureau Veritas
Level and temperature probes
For commercial vehicles
Base model: 902880
Measuring path: 50 mm or 62 mm
Temp.: -40 to +140 °C
Pt1000 temperature sensor
JUMO CANtrans T
RTD temperature probe with CANopen output
Base model: 902910
Temp.: -50 to +450 °C
CANopen software
Pt1000 temperature sensor
JUMO dTRANS T1000
Temperature sensor with IO-Link
Base model: 902915
Temp.: -50 to +260 °C
Pt1000 temperature sensor
IO-Link interface
JUMO Wtrans E01
Measuring probe for humidity, temperature, and CO2
Base model: 902928
Measuring range: 0 to 100 % RH
CO2 measuring range: 0 to 10000 ppm
Open air range 300 m
JUMO Wtrans T
RTD temperature probe with wireless data transmission
Base model: 902930
Temp.: -200 to +600 °C
Pt1000 temperature sensor
Insertion length: 30 to 10000 mm
JUMO plastoSENS T01
Voltage-resistant plastic temperature probe
Base model: 904001
Temp.: -40 to +200 °C
Nominal voltage: up to AC 3500 V
SMD, NTC, PTC, or Pt sensor
JUMO plastoSENS T02
Vibration-resistant plastic temperature probe
Base model: 904002
Temp.: -40 to +180 °C
1 or 2 Pt100 or Pt1000
Heavy-duty plastic that can withstand high loads
JUMO plastoSENS T03
Steam-tight plastic temperature probe
Base model: 904003
2 Pt100 or 2 Pt1000
Temp.: 0 to +150 °C
Protection type IP69K
JUMO plastoSENS T04
Surface-optimized plastic temperature probe
Base model: 904004
Temp.: -40 to +180 °C
Sensor: Pt100 or Pt1000
Clip mounting
Dial thermometers
Dial thermometer
For local temperature measurement
Base model: 608001
Max. case size: Ø 100 mm
Measurement range: -10 to +450 °C
Accuracy class 1.5
Dial thermometer
In industry version
Base model: 608002
Max. case size: Ø 100 mm
Measurement range: -40 to +450 °C
Accuracy class 1
Dial thermometer
For chemical applications
Base model: 608003
Max. case size: Ø 160 mm
Measuring range: -40 to +500 °C
Accuracy class 1
Dial thermometer
Transformer version
Base model: 608005
Max. case size: Ø 80 mm
Measuring range: 0 to 120 °C
Accuracy class 1.5
Dial thermometer
Panel mounting
Base model: 608201
Max. case size: Ø 60 mm
Measuring range: -30 to +500 °C
Accuracy class 1.5
Dial thermometer
For local monitoring
Base model: 608225
Max. case size: Ø 160 mm
Measurement range: -40 to +450 °C
Accuracy class 1
Contact dial thermometers
Contact dial thermometers
For temperature control
Base model: 608425
Max. case size: ø 160 mm
Measurement range: -40 to +450 °C
Max. switching capacity: 50 VA/30 W
MICROSTAT-M
Temperature controller
Base model: 608501
Max. case size: ø 100 mm
Measuring range: -40 to +600 °C
Max. switching capacity: AC 230 V, 10 A
Contact dial thermometer
For temperature control
Base model: 608520
Max. case size: ø 100 mm
Measuring range: -30 to +500 °C
With 1 or 2 microswitches
Contact dial thermometer
For temperature control
Base model: 608523
Max. case size: ø 100 mm
Measuring range: -30 to +500 °C
Max. switching capacity: AC 230 V, 10 A
JUMO dicoTEMP 800
Dial thermometer with microswitch
Base model: 608530
Max. case size: Ø 80 mm
Measuring range: 20 to 270 °C
Max. switching capacity: AC 230 V, 10 A
Contact dial thermometer
For temperature control
Base model: 608540
Max. case size: ø 80 mm
Measuring range: -30 to +500 °C
Max. switching capacity: AC 230 V, 10 A
Liquid analysis
Automation system
JUMO SVS3000
Visualization software
Base model: 700755
Sampling rate 0.7 to 2 seconds
Group pictures
Data export to ASCII
JUMO mTRON T
Central processing unit for measuring, control, and automation system
Base model: 705001
9 program generators
OPC server (CODESYS V3.5)
PLC according to IEC 61131-3
JUMO variTRON 500
Central processing unit for an automation system
Base model: 705002
State-of-the-art interfaces such as OPC UA, MQTT
EtherCAT, Modbus-TCP/RTU
800 MHz quad-core processor
Multichannel controller module
Module for automation system
Base model: 705010
2 digital inputs DC 0/24 V
Counter input up to 10 kHz
2 digital outputs as a relay
Relay module 4-channel
Module for automation system
Base model: 705015
4 relay outputs
Changeover contact AC 230 V; 3 A
Ambient temperature: -20 to +55 °C
Module for automation system
Analog input module 4-channel
Base model: 705020
4 universal analog inputs
16-bit A/D converter
1 digital input DC 0/24 V
Analog input module 8-channel
Module for automation system
Base model: 705021
8 analog inputs
16-bit A/D converter
1 digital input DC 0/24 V
Analog output module 4-channel
Module for automation system
Base model: 705025
4 analog outputs (user configurable)
0(2) to 10 V; 0(4) to 20 mA output
Ambient temperature: -20 to +55 °C
Digital input/output module 12-channel
Module for automation system
Base model: 705030
12 digital inputs or outputs
Input signal: DC 0/24 V
Output signal: DC 0/24 V; max. 500 mA
Digital input/output module 32-channel
Module for JUMO variTRON automation system
Base model: 705031
32 channels, thereof 17 digital outputs
up to 15 additional inputs or outputs
Signals: DC 0/24 V; Output: max. 500 mA
Router module
Module for measuring, control, and automation system JUMO mTRON T
Base model: 705040
3 system bus connections
Galvanically isolated interfaces
Voltage supply output
Router module 2-port
Module for automation system JUMO variTRON
Base model: 705041
2 system bus connections
Galvanically isolated interfaces
Voltage supply output
Router module 3-port
Module for automation system JUMO variTRON
Base model: 705042
3 system bus connections
Galvanically isolated interfaces
Voltage supply output
Multifunction panel 840
For measuring, control, and automation system JUMO mTRON T
Base model: 705060
2 serial interfaces
2 RJ45 system bus connections
IP67 protection on front
Operating panels
For measuring, control, and automation system JUMO mTRON T
Base model: 705065
Ethernet interface
3.5", 5.7", and 10.4" TFT color screens
IP65 protection on front
Web panels
For automation system JUMO vari TRON
Base model: 705070
up to 3 Ethernet interfaces
TFT-touchscreens 4.3 to 21.5 inch
Protection class on front: IP54 to IP69
Power supply units
Module for automation system
Base model: 705090
150 % load capacity
AC 100 to 240 V wide-range input
Efficiency up to 93.5 %
Electrodes & Sensors
JUMO ecoLine/JUMO BlackLine pH
pH combination electrode with glass or plastic shaft
Base model: 201005
Measuring range: pH 0 to 12
Temperature: 0 to 60 °C
Insertion length: 120 mm
JUMO ecoLine/JUMO BlackLine Redox
Redox combination electrode with glass or plastic shaft
Base model: 201010
Measuring range: ± 2000 mV
Temperature: 0 to 60 °C
Process pressure up to 6 bar
JUMO tecLine pH
ph combination electrodes with ceramic or glass fiber diaphragm
Base model: 201020
Measuring range: pH 0 to 14
Temperature: -5 to +135 °C
Insertion length: 120 or 225 mm
JUMO tecLine HD
pH combination electrodes
Base model: 201021
Measuring range: pH 0 to 14
Temperature: 0 to 135 °C
Process pressures up to 13 bar
JUMO tecLine HY
pH combination electrodes for hygienic applications
Base model: 201022
Measuring range: pH 0 to 14
Temperature: 0 to 135 °C
Process pressures up to 6 bar
JUMO tecLine
Redox combination electrodes
Base model: 201025
Measuring range: ± 2000 mV
Temperature: -10 to +135 °C
Process pressure up to 10 bar
JUMO tecLine HD
Redox combination electrodes
Base model: 201026
Measuring range: ± 1500 mV
Temperature: 0 to 135 °C
Process pressure up to 13 bar
JUMO tecLine HY
Redox combination electrodes
Base model: 201027
Measuring range: ± 1500 mV
Temperature: 0 to 135 °C
Process pressure up to 6 bar
Laboratory pH combination electrodes
In glass or plastic shaft version
Base model: 201030
Measuring range: pH 0 to 12
Temperature: -5 to +80 °C
Insertion length: 120 mm
Laboratory redox combination electrodes
In glass or plastic shaft version
Base model: 201035
Measuring range: ± 2000 mV
Temperature: -10 to +135 °C
Insertion length 120 mm
Request a quote
DatasheetMore details
Ammonia sensitive sensor
For monitoring leaks
Base model: 201040
Measuring range: 0.01 to 9999 ppm
Temperature: -8 to +30 °C
Insertion length 120 mm
ISFET pH combination electrode
Glass-free pH electrode
Base model: 201050
Measuring range: 0 to 14 pH
Temperature: -10 to +110 °C
Sterilizable at 130 °C
JUMO pH glass electrodes
To pH measurement
Base model: 201081
Measuring range: pH 0 to 12
Temperature: 0 to 135 °C
Screw head Pg13.5
Redox single or double electrodes
With glass or plastic shaft
Base model: 201082
Measuring range: ± 2000 mV
Temperature: 0 to 135 °C
Process connection: Pg 13.5
JUMO reference electrodes/diaphragm tube
For acquiring pH and redox values
Base model: 201083
With plug head or screw head
Temperature 0 to 80 °C or 0 to 135 °C
Pressure range up to 10 bar
JUMO compensation thermometer
For temperature compensation during pH measurements
Base model: 201085
Measurement range: 0 to 150 °C
Glass shaft (DIN 19263)
Screw head Pg13.5
JUMO dTRANS O2 01
Transmitter and controller for dissolved oxygen
Base model: 202610
Measuring range: 0 to 50 mg/l
Response time: t90 < 180 s
Accuracy: ± 1 %
JUMO ecoLine O-DO
Optical sensor for dissolved oxygen
Base model: 202613
Measuring range: 0 to 20 mg/l
Response time: t90 < 60 s
Accuracy: ± 0.1 mg/l
JUMO tecLine Cl2
Sensor for free chlorine
Base model: 202630
Measuring range: 0.05 to 200 mg/l
Response time t90: approx. 30 s
Analog and digital outputs
JUMO tecLine TC
Sensor for total chlorine
Base model: 202631
Measuring range: 0 to 20 mg/l
Response time: approx. 2 min
Analog and digital outputs
JUMO tecLine ClO2 and O3
Sensor for chlorine dioxide and ozone
Base model: 202634
Measuring range: 0.05 to 20 mg/l
Response time: approx. 15 s
Analog and digital outputs
JUMO tecLine H2O2 and PAA
Sensor for hydrogen peroxide and peracetic acid
Base model: 202636
Measuring range: 0.05 to 200000 mg/l
Response time: 5 to 10 min
Analog and digital outputs
JUMO tecLine Br
Sensor for bromineBase model: 202637
Measuring range: 0.05 to 20 mg/l
Response time: approx. 2 min
Analog and digital outputs
JUMO ecoLine NTU
Optical sensor for turbidity measurements
Base model: 202670
Measuring range: 0 to 4000 NTU
90° scattered-light principle
Temperature: 0 to 50 °C
JUMO CTI-500
Inductive conductivity transmitter with switching contacts
Base model: 202755
For inductive conductivity sensors
Separate or compact design type
With desalination control
JUMO CTI-750
Inductive conductivity transmitter with switching contacts
Base model: 202756
For inductive conductivity sensors
Separate or compact design type
For CIP cleaning
JUMO digiLine Ci ST10
Transmitter for separate inductive conductivity sensor
Base model: 202760
Separate design type for inductive sensors
Measuring range: 50 µS/cm to 2000 mS/cm
JUMO digiLine or IO-Link interface
JUMO digiLine Ci HT10
Head transmitter with inductive conductivity sensor
Base model: 202761
Compact design type with inductive sensor
Measuring range: 50 µS/cm to 2000 mS/cm
JUMO digiLine or IO-Link interface
JUMO digiLine CR ST10
Transmitter for separate conductive conductivity sensor
Base model: 202762
Separate design type for conductive sensors
Measuring range: 0.05 µS/cm to 600 mS/cm
JUMO digiLine or IO-Link interface
JUMO digiLine CR HT10
Head transmitter with conductive two-electrode conductivity sensor type EC
Base model: 202763
Compact design type with conductive sensor
Measuring range: 0.1 µS/cm to 100 mS/cm
JUMO digiLine or IO-Link interface
JUMO digiLine CR HT20
Head transmitter with conductive two-electrode conductivity sensor type PVC
Base model: 202764
Compact design type with conductive sensor
Measuring range: 0.1 µS/cm to 15 mS/cm
JUMO digiLine or IO-Link interface
JUMO digiLine CR HT30
Head transmitter with conductive two-electrode conductivity sensor type VA
Base model: 202765
Compact design type with conductive sensor
Measuring range: 0.05 µS/cm to 1 mS/cm
JUMO digiLine or IO-Link interface
JUMO digiLine CR HT40
Head transmitter with conductive two-electrode conductivity sensor type SL
Base model: 202766
Compact design type with conductive sensor
Measuring range: 0.05 µS/cm to 1 mS/cm
JUMO digiLine or IO-Link interface
JUMO digiLine CR HT50
Head transmitter with conductive two-electrode conductivity sensor type PK
Base model: 202767
Compact design type with conductive sensor
Measuring range: 0.05 µS/cm to 1 mS/cm
JUMO digiLine or IO-Link interface
JUMO digiLine CR HT60
Head transmitter with conductive two-electrode conductivity sensor type GT
Base model: 202768
Compact design type with conductive sensor
Measuring range: 10 µS/cm to 15 mS/cm
JUMO digiLine or IO-Link interface
JUMO digiLine CR HT70
Head transmitter with conductive four-electrode conductivity sensor type 4P
Base model: 202769
Compact design type with conductive sensor
Measuring range: 1 µS/cm to 600 mS/cm
JUMO digiLine or IO-Link interface
JUMO BlackLine CR-GT/-EC/-GS
Conductive two-electrode conductivity sensor
Base model: 202922
Measuring range: 0.05 µS/cm to 100 mS/cm
Process pressure up to 6 bar
Cell constant: K = 0.01; 0.1 or 1.0
JUMO ecoLine CR-PVC
Conductive two-electrode conductivity sensor
Base model: 202923
Measuring range: 0.05 µS/cm to 15 mS/cm
Process pressure up to 6 bar
Cell constant: K = 0.1 or 1.0
JUMO tecLine CR
Conductive two-electrode conductivity sensor
Base model: 202924
Measuring range: 0.05 µS/cm to 1 mS/cm
Process pressure up to 16 bar
Cell constant K = 0.01 or 0.1
JUMO tecLine CR-GT
Conductive two-electrode conductivity sensor
Base model: 202925
Measuring range: 10 µS/cm to 15 mS/cm
Process pressure up to 16 bar
Cell constant K = 1.0
JUMO tecLine CR S01
Conductive two-electrode conductivity sensor
Base model: 202928
Measuring range: 0.1 to 5000 µS/cm
Process pressure up to 6 bar
Cell constant: K = 0.1 or 1.0
JUMO tecLine CR-4P
Conductive four-electrode conductivity sensor
Base model: 202930
Measuring range: 1 µS/cm to 600 mS/cm
Process pressure up to 16 bar
Cell constant K = 0.3 to 0.4
JUMO BlackLine CR 4P
Conductive 4 Electrode Conductivity Sensor
Base model: 202931
Measuring range: 1 µS/cm to 300 mS/cm
Process pressure up to 6 bar
Cell constant: K = 0.25
JUMO tecLine Ci
Hygienic conductivity sensor
Base model: 202941
Measuring range: 0 to 2000 mS/cm
Sensor material: PEEK
Medium temperature: -10 to +125 °C
JUMO tecLine Ci-S
Conductivity sensor for process technology
Base model: 202942
Measuring range: 0 to 2000 mS/cm
Sensor material: PVDF
Medium temperature: -10 to +125 °C
JUMO ecoLine Ci
Conductivity sensor for water technology
Base model: 202943
Measuring range: 0 to 2000 mS/cm
Sensor material: PP, EPDM
Medium temperature: -10 to +80 °C
Transmitter & Controllers
JUMO dTRANS pH 02
Compact multichannel transmitter and controller
Base model: 202551
For pH, redox, ammonia, and temperature
Electrode monitoring can be activated
Surface or control cabinet mounting
JUMO dTRANS CR 02
Compact multichannel transmitters and controllers for conductivity
Base model: 202552
For conductive conductivity, temperature
RS422/485 interface
Surface or control cabinet mounting
JUMO dTRANS AS 02
Compact multichannel transmitters and controllers for standard signals
Base model: 202553
For chlorine, bromine, ozone, H2O2
1-/2 point calibration routines
Surface or control cabinet mounting
JUMO AQUIS 500 pH
Transmitter and controller for pH value
Base model: 202560
Pt100/Pt1000/NTC/PTC
pH ISFET sensor connection
LCD graphic display
JUMO AQUIS 500 CR
Transmitter and controller for conductivity
Base model: 202565
For conductivity, temperature, TDS
LCD graphic display
Calibration option
JUMO AQUIS 500 Ci
Transmitter and controller for inductive conductivity
Base model: 202566
Inductive conductivity, temperature
LCD graphic display
Wall-surface-mounted housing
JUMO AQUIS 500 AS
Indicating device and controller for standard signals
Base model: 202568
Standard signals 0 to 20 mA; 0 to 10 V
LCD graphic display
Wall-surface-mounted housing
JUMO AQUIS 500 RS
Indicating device and controller for digital sensors
Base model: 202569
For digital sensors
Modbus RS485 interface
Wall-surface-mounted housing
JUMO AQUIS touch P
Modular multichannel measuring device (liquid analysis)
Base model: 202580
Panel built-in device
2 analysis sensors and 15 measuring signals
P, PI, PD, and PID behavior
JUMO AQUIS touch S
Modular multichannel measuring device (liquid analysis)
Base model: 202581
Wall-surface-mounted housing
4 analysis sensors and 21 measuring signals
P, PI, PD, and PID behavior
JUMO dTRANS O2 01
Transmitter and controller for dissolved oxygen
Base model: 202610
Measuring range: 0 to 50 mg/l
Response time: t90 < 180 s
Accuracy: ± 1 %
JUMO digiLine pH/ORP/T
Digital or analog interface for pH/ORP/T
Base model: 202705
For pH, redox, and temperature
M12 plug connection
Analog or digital output
JUMO ecoTRANS pH 03
Transmitter and switching device for pH, redox, and temperature
Base model: 202723
For pH, redox, and temperature
2 user configurable analog outputs
DIN rail mounting
JUMO ecoTRANS Lf 01/02
Transmitter and switching device for conductivity
Base model: 202731
For conductive conductivity sensors
1 analog output (Lf 01)
1 relay output (Lf 02)
JUMO ecoTRANS Lf 03
Transmitter and switching device for conductivity
Base model: 202732
For conductive conductivity sensors
2 actual value outputs, 1 switching output
Calibration timer
JUMO CTI-500
Inductive conductivity transmitter with switching contacts
Base model: 202755
For inductive conductivity sensors
Separate or compact design type
With desalination control
JUMO CTI-750
Inductive conductivity transmitter with switching contacts
Base model: 202756
For inductive conductivity sensors
Separate or compact design type
For CIP cleaning
JUMO digiLine Ci ST10
Transmitter for separate inductive conductivity sensor
Base model: 202760
Separate design type for inductive sensors
Measuring range: 50 µS/cm to 2000 mS/cm
JUMO digiLine or IO-Link interface
JUMO digiLine Ci HT10
Head transmitter with inductive conductivity sensor
Base model: 202761
Compact design type with inductive sensor
Measuring range: 50 µS/cm to 2000 mS/cm
JUMO digiLine or IO-Link interface
JUMO digiLine CR ST10
Transmitter for separate conductive conductivity sensor
Base model: 202762
Separate design type for conductive sensors
Measuring range: 0.05 µS/cm to 600 mS/cm
JUMO digiLine or IO-Link interface
JUMO digiLine CR HT10
Head transmitter with conductive two-electrode conductivity sensor type EC
Base model: 202763
Compact design type with conductive sensor
Measuring range: 0.1 µS/cm to 100 mS/cm
JUMO digiLine or IO-Link interface
JUMO digiLine CR HT20
Head transmitter with conductive two-electrode conductivity sensor type PVC
Base model: 202764
Compact design type with conductive sensor
Measuring range: 0.1 µS/cm to 15 mS/cm
JUMO digiLine or IO-Link interface
JUMO digiLine CR HT30
Head transmitter with conductive two-electrode conductivity sensor type VA
Base model: 202765
Compact design type with conductive sensor
Measuring range: 0.05 µS/cm to 1 mS/cm
JUMO digiLine or IO-Link interface
JUMO digiLine CR HT40
Head transmitter with conductive two-electrode conductivity sensor type SL
Base model: 202766
Compact design type with conductive sensor
Measuring range: 0.05 µS/cm to 1 mS/cm
JUMO digiLine or IO-Link interface
JUMO digiLine CR HT50
Head transmitter with conductive two-electrode conductivity sensor type PK
Base model: 202767
Compact design type with conductive sensor
Measuring range: 0.05 µS/cm to 1 mS/cm
JUMO digiLine or IO-Link interface
JUMO digiLine CR HT60
Head transmitter with conductive two-electrode conductivity sensor type GT
Base model: 202768
Compact design type with conductive sensor
Measuring range: 10 µS/cm to 15 mS/cm
JUMO digiLine or IO-Link interface
JUMO digiLine CR HT70
Head transmitter with conductive four-electrode conductivity sensor type 4P
Base model: 202769
Compact design type with conductive sensor
Measuring range: 1 µS/cm to 600 mS/cm
JUMO digiLine or IO-Link interface
Pressure
Automation system
JUMO SVS3000
Visualization software
Base model: 700755
Sampling rate 0.7 to 2 seconds
Group pictures
Data export to ASCII
JUMO mTRON T
Central processing unit for measuring, control, and automation system
Base model: 705001
9 program generators
OPC server (CODESYS V3.5)
PLC according to IEC 61131-3
JUMO variTRON 500
Central processing unit for an automation system
Base model: 705002
State-of-the-art interfaces such as OPC UA, MQTT
EtherCAT, Modbus-TCP/RTU
800 MHz quad-core processor
Multichannel controller module
Module for automation system
Base model: 705010
2 digital inputs DC 0/24 V
Counter input up to 10 kHz
2 digital outputs as a relay
Relay module 4-channel
Module for automation system
Base model: 705015
4 relay outputs
Changeover contact AC 230 V; 3 A
Ambient temperature: -20 to +55 °C
Module for automation system
Analog input module 4-channel
Base model: 705020
4 universal analog inputs
16-bit A/D converter
1 digital input DC 0/24 V
Analog input module 8-channel
Module for automation system
Base model: 705021
8 analog inputs
16-bit A/D converter
1 digital input DC 0/24 V
Analog output module 4-channel
Module for automation system
Base model: 705025
4 analog outputs (user configurable)
0(2) to 10 V; 0(4) to 20 mA output
Ambient temperature: -20 to +55 °C
Digital input/output module 12-channel
Module for automation system
Base model: 705030
12 digital inputs or outputs
Input signal: DC 0/24 V
Output signal: DC 0/24 V; max. 500 mA
Digital input/output module 32-channel
Module for JUMO variTRON automation system
Base model: 705031
32 channels, thereof 17 digital outputs
up to 15 additional inputs or outputs
Signals: DC 0/24 V; Output: max. 500 mA
Router module
Module for measuring, control, and automation system JUMO mTRON T
Base model: 705040
3 system bus connections
Galvanically isolated interfaces
Voltage supply output
Router module 2-port
Module for automation system JUMO variTRON
Base model: 705041
2 system bus connections
Galvanically isolated interfaces
Voltage supply output
Router module 3-port
Module for automation system JUMO variTRON
Base model: 705042
3 system bus connections
Galvanically isolated interfaces
Voltage supply output
Multifunction panel 840
For measuring, control, and automation system JUMO mTRON T
Base model: 705060
2 serial interfaces
2 RJ45 system bus connections
IP67 protection on front
Operating panels
For measuring, control, and automation system JUMO mTRON T
Base model: 705065
Ethernet interface
3.5", 5.7", and 10.4" TFT color screens
IP65 protection on front
Web panels
For automation system JUMO vari TRON
Base model: 705070
up to 3 Ethernet interfaces
TFT-touchscreens 4.3 to 21.5 inch
Protection class on front: IP54 to IP69
Power supply units
Module for automation systemBase model: 705090
150 % load capacity
AC 100 to 240 V wide-range input
Efficiency up to 93.5 %
Digital indicators
JUMO DELOS SI
Precision pressure transmitter with switching contact and display
Base model: 405052
Measuring range: 0 to 60 bar relative/absolute
Accuracy as of 0.1 % from end value
Measuring range scaling 1:4
JUMO DELOS HP
Precision pressure transmitter with switching contacts and display
Base model: 405054
Measuring range: 0 to 600 bar relative
Accuracy as of 0.15 % from end value
Measuring range scaling 1:4
JUMO diraVIEW 104/108/116/132
Digital indicator
Base model: 701510
One universal analog input
Galvanic isolation 3000 V
5 DIN formats (size)
JUMO di eco
Digital indicator
Base model: 701540
Different measurement inputs can be chosen from
No galvanic isolation
Size: 76 × 36 mm
JUMO di 308
Digital indicator
Base model: 701550
Up to 2 universal analog inputs
Galvanic isolation 500 V
Size: 96 × 48 mm
Transmitters
JUMO MIDAS
Pressure transmitter
Base model: 401001
Measuring range: -1 to +100 bar rel.
High chemical resistance
Compact design type
JUMO MIDAS C08
OEM pressure transmitter for basic applications
Base model: 401002
Measuring range: -1 to +60 bar rel.
Compensates -20 to +100 °C
Elastomer seal
JUMO MIDAS SI
OEM pressure transmitter
Base model: 401006
Range: 1.6 bar rel or 25 bar abs
Welded measuring system
Silicon sensor
JUMO MIDAS S19 R
OEM pressure transmitter for railway applications
Base model: 401008
Range: 100 bar rel or 40 bar abs
High EMC requirements
Specifically for railway technology
JUMO MIDAS DR
Pressure transmitter for control cabinet mounting
Base model: 401009
Measuring range: 0 to 16 bar relative
Elastomer seal
Compact design type
JUMO MIDAS S05
OEM pressure transmitter for universal applications
Base model: 401010
Range: 100 bar rel or 40 bar abs
Compact design type
Piezoresistive silicon sensor
JUMO MIDAS S06
OEM pressure transmitter for low pressure applications
Base model: 401011
Measuring range: -400 to +400 mbar rel.
Compact design type
fulfils railway approvals
JUMO MIDAS C18 SW
OEM pressure transmitter for seawater applications
Base model: 401012
Measuring range: -1 to +100 bar rel.
Vibration resistance
DNVGL approval
JUMO MIDAS H20 HP
OEM pressure transmitter for high pressure applications
Base model: 401020
Measuring range: 100 to 1000 bar rel.
Protection type IP65 to IP69K
ECE type approval
JUMO MIDAS S07 MA
OEM pressure transmitter - maritime approved
Base model: 401021
Range: 100 bar rel or 25 bar abs
Reverse-polarity protection
DNVGL approval
JUMO MIDAS DP10
Differential pressure transmitter
Base model: 401050
Measuring range: 400 mbar to 16 bar
Compact design type
Fulfils railway approvals
JUMO Pressure and differential pressure transmitter
For non-aggressive gases
Base model: 402005
Measuring range: 2.5 hPa to 100 hPa DP
Adjustable attenuation
0 to 10 V or 0(4) to 20 mA
JUMO dTRANS p31
Pressure transmitter for increased medium temperatures
Base model: 402050
Range: 60 bar rel or 25 bar abs
Temperature: -30 to 200 °C
Protection type: max. IP67
JUMO dTRANS p32
Pressure transmitterBase model: 402051
0 to 1.6 bar relative pressure
Protection type: IP65/IP67
Sensitive pressure recording
JUMO CANtrans p ceramic
Pressure transmitter with CANopen output
Base model: 402055
Protection type: IP67
1.6 bar to 100 bar relative pressure
-20 to +85 °C
JUMO CANtrans p
Pressure transmitter with CANopen output
Base model: 402056
Protection type IP67
-40 to +125 °C
600 bar relative to 25 bar absolute
JUMO dTRANS p35
Pressure sensor with IO-Link
Base model: 402058
Measuring range from 400 mbar to 600 bar relative
Medium temperatures -40 to +125 °C
IO-Link interface
JUMO Wtrans p
Pressure transmitter with wireless data transmission
Base model: 402060
600 bar relative to 25 bar absolute
Range up to 300 m
Radio frequency: 868.4 MHz
JUMO dTRANS p20 DELTA Ex d
Differential pressure transmitter with flameproof enclosure
Base model: 403023
1 mbar to 100 bar DP
Explosion protection [Ex d]
Linearity: 0.07 %
JUMO dTRANS p20
Process pressure transmitter
Base model: 403025
Linearity: 0.05 %
High temperature up to 200 °C
-1 to +600 bar relative, 0 to 100 bar absolute
JUMO dTRANS p20 Ex d
Process pressure transmitter with a flameproof enclosure
Base model: 403026
-1 to +600 bar relative, 0 to 100 bar absolute
Linearity: 0.05 %
Deviation of 0.05 %
JUMO differential pressure monitor
For air, smoke, and exhaust gases
Base model: 404201
Temperature -15 to +70 °C
Parts made out of polycarbonate
Measuring ranges: from 0.4 mbar
JUMO Pressure and differential pressure transmitter
For non-aggressive gases
Base model: 404304
0.50 to 1200 mbar DP, relative
Temperature -10 to +50 °C
Characteristic line: linear/root extracted
Pressure transmitter
With analog actual value display
Base model: 404312
Measuring range: -1 to +400 bar
Protection type IP54
Deviation from characteristic line ≤ 0.5 %
JUMO dTRANS ceramic
For small measuring ranges
Base model: 404327
50 mbar to 1 bar relative pressure
Linearity: ≤ 0.2 % of end value
Protection type: IP67
JUMO dTRANS p30
Pressure transmitter
Base model: 404366
600 bar relative to 25 bar absolute
Temperature: -30 to +120 °C
Protection type: IP65/IP67
JUMO dTRANS p02 DELTA
Pressure transmitter
Base model: 404382
0 to 60 mbar DP – 0 to 25 bar DP
Temperature: -40 to +100 °C
Linearity: ≤ 0.1 % of end value
JUMO dTRANS p02
Pressure transmitter
Base model: 404385
600 bar relative - 25 bar absolute
Temperature -40 to +200 °C
Linearity: ≤ 0.1 %
JUMO dTRANS p02 CERAMIC
Pressure transmitter with display
Base model: 404387
Measuring range: -0.1 to +25 bar
Admissible medium temp.: -40 to +120 °C
Linearity: ≤ 0.1 %
JUMO MIDAS S21 Ex
Pressure transmitter for use in Ex areas
Base model: 404710
From 0.25 to 100 bar relative and absolute
Admissible medium temperature: -40 to +85 °C
Accuracy: as of 0.3 % MSP
JUMO dTRANS p33
Pressure transmitter and level probe for Ex areas
Base model: 404753
Admissible medium temperature: -40 to +200 °C
Up to 600 bar relative and 25 bar absolute
0.5 % MSP (linearity)
JUMO DELOS SI
Precision pressure transmitter with switching contact and display
Base model: 405052
Measuring range: 0 to 60 bar relative/absolute
Accuracy as of 0.1 % from end value
Measuring range scaling 1:4
JUMO DELOS HP
Precision pressure transmitter with switching contacts and display
Base model: 405054
Measuring range: 0 to 600 bar relative
Accuracy as of 0.15 % from end value
Measuring range scaling 1:4
JUMO CEROS S01 M
Digital pressure measuring cell
Base model: 405101
Measuring range from 100 mbar to 100 bar
for installation in one's own devices
Individual connection possibilities
Diaphragm seal with flange connection
DIN EN 1092-1 with sealing strip type B1Base model: 409784
Accessories: stainless steel flushing ring (1.4571)
Nominal pressure: PN 16 to PN 400
Process connection: DN 25, DN 50, DN 80, DN 100
JUMO Wtrans receiver
Universal receiver for JUMO wireless measuring probes
Base model: 902931
Signals (0(4)-20 mA, 0-10 V)
RS485 interface
Open air range 300 m
Measuring cells
Pressure measuring cells
For OEM applications
Base model: 404410
Silicon semiconductor thin-film strain gauge
Very good price-performance ratio
Material: stainless steel
JUMO CEROS S01 M
Digital pressure measuring cell
Base model: 405101
Measuring range from 100 mbar to 100 bar
for installation in one's own devices
Individual connection possibilities
Control
JUMO IMAGO F3000
Process control for the meat processing industry
Base model: 700101
4 control channels
5" color screen
315 × 171/171 × 315 mm formats
JUMO Quantrol LC100/LC200/LC300
Universal PID Controller Series
Base model: 702030
48 × 48 mm, 48 × 96 mm, 96 × 96 mm formats
RS485 interface (Modbus-RTU)
Two-state/three-state/continuous controller
JUMO iTRON DR 100
Compact controller
Base model: 702060
Mounting on DIN rail, 35 mm
Two-state/three-state controller
Design width 22.5 mm
JUMO diraTRON
Compact controller
Base model: 702110
1 control channel
Display of individual texts
Service counter
JUMO dTRON 304/308/316
Compact controller with program function
Base model: 703041
4 limit value monitoring functions
Inputs/outputs can be expanded
Formats: 48 × 48 – 96 × 96 mm
JUMO dTRON 304/308/316 plast
Compact controller for the plastics industry
Base model: 703046
Formats: 48 × 48 mm, 48 × 96 mm, 96 × 96 mm
PROFIBUS DP interface
Modbus master/slave interface
JUMO DICON touch
Two-channel/Four-channel process and program controller
Base model: 703571
Cascade control
Modbus master TCP/RTU
Up to 4 analog inputs
JUMO IMAGO 500
Multichannel process and program controller
Base model: 703590
Up to 8 control channels and 4 program channels
Up to 4 cascade controllers
50 programs with 100 sections
Humidity & CO2
Automation system
JUMO mTRON T
Central processing unit for measuring, control, and automation system
Base model: 705001
9 program generators
OPC server (CODESYS V3.5)
PLC according to IEC 61131-3
JUMO variTRON 500
Central processing unit for an automation system
Base model: 705002
State-of-the-art interfaces such as OPC UA, MQTT
EtherCAT, Modbus-TCP/RTU
800 MHz quad-core processor
Multichannel controller module
Module for automation system
Base model: 705010
2 digital inputs DC 0/24 V
Counter input up to 10 kHz
2 digital outputs as a relay
Relay module 4-channel
Module for automation system
Base model: 705015
4 relay outputs
Changeover contact AC 230 V; 3 A
Ambient temperature: -20 to +55 °C
Module for automation system
Analog input module 4-channel
Base model: 705020
4 universal analog inputs
16-bit A/D converter
1 digital input DC 0/24 V
Analog input module 8-channel
Module for automation system
Base model: 705021
8 analog inputs
16-bit A/D converter
1 digital input DC 0/24 V
Analog output module 4-channel
Module for automation system
Base model: 705025
4 analog outputs (user configurable)
0(2) to 10 V; 0(4) to 20 mA output
Ambient temperature: -20 to +55 °C
Digital input/output module 12-channel
Module for automation system
Base model: 705030
12 digital inputs or outputs
Input signal: DC 0/24 V
Output signal: DC 0/24 V; max. 500 mA
Router module
Module for measuring, control, and automation system JUMO mTRON T
Base model: 705040
3 system bus connections
Galvanically isolated interfaces
Voltage supply output
Router module 2-port
Module for automation system JUMO variTRON
Base model: 705041
2 system bus connections
Galvanically isolated interfaces
Voltage supply output
Router module 3-port
Module for automation system JUMO variTRON
Base model: 705042
3 system bus connections
Galvanically isolated interfaces
Voltage supply output
Multifunction panel 840
For measuring, control, and automation system JUMO mTRON T
Base model: 705060
2 serial interfaces
2 RJ45 system bus connections
IP67 protection on front
Operating panels
For measuring, control, and automation system JUMO mTRON T
Base model: 705065
Ethernet interface
3.5", 5.7", and 10.4" TFT color screens
IP65 protection on front
Web panels
For automation system JUMO vari TRON
Base model: 705070
up to 3 Ethernet interfaces
TFT-touchscreens 4.3 to 21.5 inch
Protection class on front: IP54 to IP69
Power supply units
Module for automation system
Base model: 705090
150 % load capacity
AC 100 to 240 V wide-range input
Efficiency up to 93.5 %
Hygrostats
Hygrometric
Base model: 907032
Measuring range: 30 to 100 % RH
Temperature: -30 to +60 °C
Can be used permanently in high humidity
Hygro- & Hygrothermo sensor
JUMO Wtrans E01
Measuring probe for humidity, temperature, and CO2
Base model: 902928
Measuring range: 0 to 100 % RH
CO2 measuring range: 0 to 10000 ppm
Open air range 300 m
Hygro transducer and hygrothermal transducer (capacitive)
For applications in the air-conditioning sector
Base model: 907020
Measuring range: 0 to 100 % RH
Medium: air, pressureless (non-aggressive)
Pt100 temperature output
Hygro transducer, hygrothermal transducer and CO2 measuring probe
For facility management and climate monitoring
Base model: 907021
Measuring range: 0 to 100 % RH
Medium: air, pressureless
CO2 measuring range: 0 to 10000 ppm
Humidity and temperature measuring probe
For industrial applications
Base model: 907023
Measuring range: 0 to 100 % RH
Medium: air, compressed air, vacuum
Pressure resistant up to 100 bar
Intrinsically safe industrial measuring probe
For humidity, temperature, and derived variables
Base model: 907025
Measuring range: 0 to 100 % RH
ATEX approval up to zone 0
Pressure resistant up to 100 bar
Capacitive hygrothermal transducer
With intelligent interchangeable probes
Base model: 907027
Measuring range: 0 to 100 % RH
Medium: air, pressureless
Separate probes for humidity & temperature
Hygro transducer and hygrothermal transducer
Hygrometric
Base model: 907031
Measuring range: 0 to 100 % RH
Medium: air, pressureless (non-aggressive)
Can be used permanently in high humidity
Flow
Automation system
JUMO SVS3000
Visualization software
Base model: 700755
Sampling rate 0.7 to 2 seconds
Group pictures
Data export to ASCII
JUMO mTRON T
Central processing unit for measuring, control, and automation system
Base model: 705001
9 program generators
OPC server (CODESYS V3.5)
PLC according to IEC 61131-3
JUMO variTRON 500
Central processing unit for an automation system
Base model: 705002
State-of-the-art interfaces such as OPC UA, MQTT
EtherCAT, Modbus-TCP/RTU
800 MHz quad-core processor
Multichannel controller module
Module for automation system
Base model: 705010
2 digital inputs DC 0/24 V
Counter input up to 10 kHz
2 digital outputs as a relay
Relay module 4-channel
Module for automation system
Base model: 705015
4 relay outputs
Changeover contact AC 230 V; 3 A
Ambient temperature: -20 to +55 °C
Module for automation system
Analog input module 4-channel
Base model: 705020
4 universal analog inputs
16-bit A/D converter
1 digital input DC 0/24 V
Analog input module 8-channel
Module for automation system
Base model: 705021
8 analog inputs
16-bit A/D converter
1 digital input DC 0/24 V
Analog output module 4-channel
Module for automation system
Base model: 705025
4 analog outputs (user configurable)
0(2) to 10 V; 0(4) to 20 mA output
Ambient temperature: -20 to +55 °C
Digital input/output module 12-channel
Module for automation system
Base model: 705030
12 digital inputs or outputs
Input signal: DC 0/24 V
Output signal: DC 0/24 V; max. 500 mA
Digital input/output module 32-channel
Module for JUMO variTRON automation system
Base model: 705031
32 channels, thereof 17 digital outputs
up to 15 additional inputs or outputs
Signals: DC 0/24 V; Output: max. 500 mA
Router module
Module for measuring, control, and automation system JUMO mTRON T
Base model: 705040
3 system bus connections
Galvanically isolated interfaces
Voltage supply output
Router module 2-port
Module for automation system JUMO variTRON
Base model: 705041
2 system bus connections
Galvanically isolated interfaces
Voltage supply output
Router module 3-port
Module for automation system JUMO variTRON
Base model: 705042
3 system bus connections
Galvanically isolated interfaces
Voltage supply output
Multifunction panel 840
For measuring, control, and automation system JUMO mTRON T
Base model: 705060
2 serial interfaces
2 RJ45 system bus connections
IP67 protection on front
Operating panels
For measuring, control, and automation system JUMO mTRON T
Base model: 705065
Ethernet interface
3.5", 5.7", and 10.4" TFT color screens
IP65 protection on front
Web panels
For automation system JUMO vari TRON
Base model: 705070
up to 3 Ethernet interfaces
TFT-touchscreens 4.3 to 21.5 inch
Protection class on front: IP54 to IP69
Power supply units
Module for automation system
Base model: 705090
150 % load capacity
AC 100 to 240 V wide-range input
Efficiency up to 93.5 %
Paperless recorders
JUMO LOGOSCREEN 600
Paperless recorder with touchscreen
Base model: 706520
Max. 6 analog and max. 12 digital inputs
Max. 12 digital inputs/outputs
Batch report recording
JUMO LOGOSCREEN 601
Paperless recorder with touchscreen
Base model: 706521
Max. 6 analog and max. 6 digital inputs
Max. 12 digital inputs/outputs
Batch report recording
JUMO LOGOSCREEN 700
Highly scalable paperless recorder
Base model: 706530
Max. 18 analog inputs and max. 18 digital inputs
Max. 24 digital inputs/outputs
Up to 5 batch reports at the same time
JUMO LOGOSCREEN nt
Paperless recorder
Base model: 706581
Max. 18 analog inputs, max. 24 digital inputs
Max. 24 digital inputs/outputs
Up to 3 batch reports at the same time
JUMO LOGOSCREEN fd
Data management and FDA-compliant measured data acquisition
Base model: 706585
Max. 18 analog inputs, max. 24 digital inputs
Max. 24 digital inputs/outputs
Up to 3 batch reports at the same time
Digital indicators
JUMO diraVIEW 104/108/116/132
Digital indicator
Base model: 701510
One universal analog input
Galvanic isolation 3000 V
5 DIN formats (size)
JUMO di eco
Digital indicator
Base model: 701540
Different measurement inputs can be chosen from
No galvanic isolation
Size: 76 × 36 mm
JUMO di 308
Digital indicator
Base model: 701550
Up to 2 universal analog inputs
Galvanic isolation 500 V
Size: 96 × 48 mm
Measuring devices
JUMO flowTRANS MAG I02
Plug-in magnetic-inductive flow transmitter with display
Base model: 406011
Total and daily counter
Configurable inputs and outputs
Temperatures up to 110 °C
JUMO flowTRANS MAG S01
Electromagnetic flowmeter
Base model: 406012
Nominal widths DN 3 to DN 2000
Nominal pressure PN 6 to PN 100
Medium temp. 180 °C
JUMO flowTRANS MAG H01
Electromagnetic flowmeter – hygienic version
Base model: 406015
Nominal widths DN 1 to DN 100
Vacuum proof
Medium temp. 180 °C
JUMO flowTRANS PW I01
Plug-in paddlewheel flow sensor
Base model: 406020
Pulse frequency signal
Pressures up to PN 10
Temperatures up to 70 °C
JUMO flowTRANS MAG S10
Electromagnetic flowmeter
Base model: 406060
Nominal widths DN 3 to DN 2000
Nominal pressure PN 10 to PN 40
Medium temp. 130 °C
JUMO flowTRANS MAG H10
Electromagnetic flowmeter
Base model: 406061
Nominal widths DN 3 to DN 100
Nominal pressure PN 10 to PN 40
Medium temp. 130 °C
JUMO flowTRANS DP P01/P02/P03/P04
Flow measurement with pitot tube
Base model: 409601
Optional condensate traps for steam
Cost benefits with large nominal widths
Suitable for flue gas applications
JUMO flowTRANS DP R01/R02
Flow measurement with orifice plate
Base model: 409602
Available as a complete meter run
Replaceable measuring insert possible
Proven measuring principle
Controllers
JUMO IMAGO F3000
Process control for the meat processing industry
Base model: 700101
4 control channels
5" color screen
315 × 171/171 × 315 mm formats
JUMO diraTRON
Compact controller
Base model: 702110
1 control channel
Display of individual texts
Service counter
JUMO dTRON 304/308/316
Compact controller with program function
Base model: 703041
4 limit value monitoring functions
Inputs/outputs can be expanded
Formats: 48 × 48 – 96 × 96 mm
JUMO dTRON 304/308/316 plast
Compact controller for the plastics industry
Base model: 703046
Formats: 48 × 48 mm, 48 × 96 mm, 96 × 96 mm
PROFIBUS DP interface
Modbus master/slave interface
JUMO DICON touch
Two-channel/Four-channel process and program controller
Base model: 703571
Cascade control
Modbus master TCP/RTU
Up to 4 analog inputs
JUMO IMAGO 500
Multichannel process and program controller
Base model: 703590
Up to 8 control channels and 4 program channels
Up to 4 cascade controllers
50 programs with 100 sections
Flow sensor
JUMO flowTRANS MAG I01
Plug-in magnetic-inductive flow transmitter
Base model: 406010
Pressures up to PN 16
Stainless steel sensor
Temperatures up to 150 °C
JUMO flowTRANS PW I01
Plug-in paddlewheel flow sensor
Base model: 406020
Pulse frequency signal
Pressures up to PN 10
Temperatures up to 70 °C
JUMO PINOS L02
Calorimetric flow sensor
Base model: 406041
For liquid media
Switching points adjustable on the device
For temperatures of up to 90 °C
Fittings
For flow sensors
Base model: 406090
Pressure PN 10 to PN 16
Temperatures of 50 to 150 °C
Material PVC or 1.4404
Level
Automation system
JUMO mTRON T
Central processing unit for measuring, control, and automation system
Base model: 705001
9 program generators
OPC server (CODESYS V3.5)
PLC according to IEC 61131-3
JUMO variTRON 500
Central processing unit for an automation system
Base model: 705002
State-of-the-art interfaces such as OPC UA, MQTT
EtherCAT, Modbus-TCP/RTU
800 MHz quad-core processor
Multichannel controller module
Module for automation system
Base model: 705010
2 digital inputs DC 0/24 V
Counter input up to 10 kHz
2 digital outputs as a relay
Relay module 4-channel
Module for automation system
Base model: 705015
4 relay outputs
Changeover contact AC 230 V; 3 A
Ambient temperature: -20 to +55 °C
Module for automation system
Analog input module 4-channel
Base model: 705020
4 universal analog inputs
16-bit A/D converter
1 digital input DC 0/24 V
Analog input module 8-channel
Module for automation system
Base model: 705021
8 analog inputs
16-bit A/D converter
1 digital input DC 0/24 V
Analog output module 4-channel
Module for automation system
Base model: 705025
4 analog outputs (user configurable)
0(2) to 10 V; 0(4) to 20 mA output
Ambient temperature: -20 to +55 °C
Digital input/output module 12-channel
Module for automation system
Base model: 705030
12 digital inputs or outputs
Input signal: DC 0/24 V
Output signal: DC 0/24 V; max. 500 mA
Router module
Module for measuring, control, and automation system JUMO mTRON T
Base model: 705040
3 system bus connections
Galvanically isolated interfaces
Voltage supply output
Router module 2-port
Module for automation system JUMO variTRON
Base model: 705041
2 system bus connections
Galvanically isolated interfaces
Voltage supply output
Router module 3-port
Module for automation system JUMO variTRON
Base model: 705042
3 system bus connections
Galvanically isolated interfaces
Voltage supply output
Multifunction panel 840
For measuring, control, and automation system JUMO mTRON T
Base model: 705060
2 serial interfaces
2 RJ45 system bus connections
IP67 protection on front
Operating panels
For measuring, control, and automation system JUMO mTRON T
Base model: 705065
Ethernet interface
3.5", 5.7", and 10.4" TFT color screens
IP65 protection on front
Web panels
For automation system JUMO vari TRON
Base model: 705070
up to 3 Ethernet interfaces
TFT-touchscreens 4.3 to 21.5 inch
Protection class on front: IP54 to IP69
Power supply units
Module for automation system
Base model: 705090
150 % load capacity
AC 100 to 240 V wide-range input
Efficiency up to 93.5 %
Paperless recorders
JUMO LOGOSCREEN 600
Paperless recorder with touchscreen
Base model: 706520
Max. 6 analog and max. 12 digital inputs
Max. 12 digital inputs/outputs
Batch report recording
JUMO LOGOSCREEN 601
Paperless recorder with touchscreen
Base model: 706521
Max. 6 analog and max. 6 digital inputs
Max. 12 digital inputs/outputs
Batch report recording
JUMO LOGOSCREEN 700
Highly scalable paperless recorder
Base model: 706530
Max. 18 analog inputs and max. 18 digital inputs
Max. 24 digital inputs/outputs
Up to 5 batch reports at the same time
JUMO LOGOSCREEN nt
Paperless recorder
Base model: 706581
Max. 18 analog inputs, max. 24 digital inputs
Max. 24 digital inputs/outputs
Up to 3 batch reports at the same time
JUMO LOGOSCREEN fd
Data management and FDA-compliant measured data acquisition
Base model: 706585
Max. 18 analog inputs, max. 24 digital inputs
Max. 24 digital inputs/outputs
Up to 3 batch reports at the same time
Digital indicators
JUMO diraVIEW 104/108/116/132
Digital indicator
Base model: 701510
One universal analog input
Galvanic isolation 3000 V
5 DIN formats (size)
JUMO di eco
Digital indicator
Base model: 701540
Different measurement inputs can be chosen from
No galvanic isolation
Size: 76 × 36 mm
JUMO di 308
Digital indicator
Base model: 701550
Up to 2 universal analog inputs
Galvanic isolation 500 V
Size: 96 × 48 mm
Transmitters
JUMO dTRANS p02 DELTA
Pressure transmitter
Base model: 404382
0 to 60 mbar DP – 0 to 25 bar DP
Temperature: -40 to +100 °C
Linearity: ≤ 0.1 % of end value
JUMO dTRANS p02 CERAMIC
Pressure transmitter with display
Base model: 404387
Measuring range: -0.1 to +25 bar
Admissible medium temp.: -40 to +120 °C
Linearity: ≤ 0.1 %
JUMO NESOS R20 LT
Level transmitter via float
Base model: 408320
Guide tube length up to 4000 mm
Reed chain up to 5.5 mm resolution
Optional display
Level sensors
Level and temperature probes
For commercial vehiclesBase model: 902880
Measuring path: 50 mm or 62 mm
Temp.: -40 to +140 °C
Pt1000 temperature sensor
Request a quote
Level probes
JUMO MAERA S25
Level probe
Base model: 401015
Measuring range: 0.25 to 1 bar
Piezoresistive measuring cell
0.3 % MSP (linearity)
JUMO MAERA S26
Level probe
Base model: 402090
Reverse-polarity protection
0.3 % MSP (linearity)
250 mbar to 2.5 bar
JUMO MAERA F27
Level probe
Base model: 404391
Measuring range: 50 mbar to 1.6 bar
Admissible medium temperature: -20 to +60 °C
Linearity: 0.2 % MSP
JUMO MAERA S28
Level probe
Base model: 404392
Measuring range: 250 mbar to 10 bar
Admissible medium temperature: 0 to 50 °C
Reverse-polarity protection
JUMO MAERA S29 SW
Titanium level probe
Base model: 404393
Measuring range: 100 mbar to 10 bar
Admissible medium temperature: 0 to 50 °C
Linearity: 0.3 % MSP
JUMO dTRANS p33
Pressure transmitter and level probe for Ex areas
Base model: 404753
Admissible medium temperature: -40 to +200 °C
Up to 600 bar relative and 25 bar absolute
0.5 % MSP (linearity)
Controller
JUMO AQUIS touch S
Modular multichannel measuring device (liquid analysis)
Base model: 202581
Wall-surface-mounted housing
4 analysis sensors and 21 measuring signals
P, PI, PD, and PID behavior
JUMO IMAGO F3000
Process control for the meat processing industry
Base model: 700101
4 control channels
5" color screen
315 × 171/171 × 315 mm formats
JUMO Quantrol LC100/LC200/LC300
Universal PID Controller Series
Base model: 702030
48 × 48 mm, 48 × 96 mm, 96 × 96 mm formats
RS485 interface (Modbus-RTU)
Two-state/three-state/continuous controller
JUMO diraTRON
Compact controller
Base model: 702110
1 control channel
Display of individual texts
Service counter
JUMO DICON touch
Two-channel/Four-channel process and program controller
Base model: 703571
Cascade control
Modbus master TCP/RTU
Up to 4 analog inputs
JUMO IMAGO 500
Multichannel process and program controller
Base model: 703590
Up to 8 control channels and 4 program channels
Up to 4 cascade controllers
50 programs with 100 sections
Float switches
JUMO NESOS R01 LS
Float switch in miniature form
Base model: 408301
Guide tube length up to 500 mm
Up to 4 floats and 4 contacts
Optional temperature probe
JUMO NESOS R02 LS
Standard version of float switch
Base model: 408302
Guide tube length up to 5000 mm
Up to 5 floats and 5 contacts
Optional temperature probe/switch
JUMO NESOS R03 LS
Float switch with chamber
Base model: 408303
Guide tube length up to 111 mm
1 float and up to 2 contacts
Optional temperature probe/switch
JUMO NESOS R04 LS
Float switch in curved version
Base model: 408304
Guide tube length up to 200 cm
Up to 5 switching outputs user definable
Optional temperature probe/switch
JUMO NESOS R40 LSH
Float switch in horizontal design
Base model: 408340
Guide tube length up to 1000 mm
1 float and up to 2 contacts
Temperature probe or switch as a option
Actuator
Semiconductor relay
JUMO TYA 432
Thyristor power switch
Base model: 709010
Load currents 25 A and 50 A (max.)
Control voltage 4 to 32 V DC
Load voltages 230 V, 480 V (max.)
JUMO TYA 432
Thyristor power switch
Base model: 709020
Load currents 20 A, 25 A, 40 A, 60 A
Control voltage 5 to 32 V DC
Mains voltages 240 V, 600 V (max.)
Power control
JUMO TYA 201
Single-phase thyristor power controller
Base model: 709061
Single-phase operation
Load voltage 24 V to 500 V
PROFINET or EtherCAT
JUMO TYA 202
Three-phase thyristor power controller in three-phase economy circuit
Base model: 709062
Star-delta three-phase operation
Load voltage 24 V to 500 V
PROFINET or EtherCAT
JUMO TYA 203
Three-phase thyristor power controller
Base model: 709063
Star connection or delta connection
Load voltage 24 V to 500 V
PROFINET or EtherCAT
JUMO TYA S201
Single-phase thyristor power controller for burst-firing operation
Base model: 709065
Single-phase operation
Load voltage 230 V, 400 V, 460 V, 500 V
PROFINET or RS422/RS485
JUMO TYA S202
Three-phase thyristor power controller for burst-firing operation in economy circuit
Base model: 709066
Three-phase economy circuit
Load voltage 400 V, 460 V, 500 V
PROFINET or RS422/RS485
# Tags
Jumo Temperature, Jumo Temperature Automation, Jumo Temperature Paperless recorders, Jumo Temperature Digital indicators, Jumo Temperature Transmitters, Jumo Temperature Platinum temperature sensors, Jumo Temperature Controllers, Jumo Temperature Switches, Jumo Temperature Thermocouples, Jumo Temperature Thermostats, Jumo Temperature Monitors & limiters, Jumo Temperature Heat meters, Jumo Temperature RTD temperature probes, Jumo Temperature Dial thermometers, Jumo Temperature Contact dial thermometers, Jumo Liquid analysis, Jumo Liquid Automation system, Jumo Liquid Electrodes & Sensors, Jumo Liquid Transmitter & Controllers, Jumo Pressure, Jumo Pressure Automation system, Jumo Pressure Digital indicators, Jumo Pressure Transmitters, Jumo Pressure Measuring cells, Jumo Pressure Control, Jumo Humidity & CO2, Jumo Humidity & CO2 Automation system, Jumo Humidity & CO2 Hygrostats, Jumo Humidity & CO2 Hygro- & Hygrothermo sensor, Jumo Flow, Jumo Flow Automation system, Jumo Flow Paperless recorders, Jumo Flow Digital indicators, Jumo Flow Measuring devices, Jumo Flow Controllers, Jumo Flow sensor, Jumo Level, Jumo Level Automation system, Jumo Level Paperless recorders, Jumo Level Digital indicators, Jumo Level Transmitters, Jumo Level sensors, Jumo Level Level probes, Jumo Level Controller, Jumo Level Float switches, Jumo Actuator, Jumo Actuator Semiconductor relay, Jumo Actuator Power control
dienelectrics@gmail.com
0909186879 
GermanyCó Discount
1,740Jumo 701150/8-02-0253-2001-23/005 | STB/STW Temperature Limiter -Bộ giới hạn nhiệt độ 85x45mm 2Analogue-2Relay 110-240VAC
