Width: 17,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: DC
Thermal current Ith max.: 5 A
1- / 2-channel: 1, 2
Emergency stop module UF 6925
Width: 17,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: DC
Thermal current Ith max.: 8 A
1- / 2-channel: 2
Emergency stop module BG 5924
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: AC, DC, AC/DC
Thermal current Ith max.: 5 A
1- / 2-channel: 1, 2
Emergency stop module BG 5925
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: DC, AC/DC
Thermal current Ith max.: 5 A
1- / 2-channel: 1, 2
Emergency stop module LG 5924
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: AC, DC
Thermal current Ith max.: 5 A
1- / 2-channel: 1, 2
Emergency Stop Module LG 5925
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: AC, AC/DC
Thermal current Ith max.: 8 A
1- / 2-channel: 1, 2
Safety Module for Elevator Controls LG 5925/034
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: AC/DC
Thermal current Ith max.: 5 A
1- / 2-channel: 1, 2
Emergency Stop Module With Time Delay LG 5928
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: DC
Thermal current Ith max.: 8 A
1- / 2-channel: 1, 2
Emergency stop module BD 5935
Width: 45 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: AC, DC
Thermal current Ith max.: 10 A
1- / 2-channel: 1, 2
Emergency stop module BD 5987
Width: 45 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: AC, DC
Thermal current Ith max.: 10 A
1- / 2-channel: 1, 2
Emergency stop module with voltage failure detection BH 5903
Width: 45 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: DC
Thermal current Ith max.: 5 A
1- / 2-channel: 1, 2
Emergency stop module with time delay BH 5928
Width: 45 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: DC, AC/DC
Thermal current Ith max.: 5 A
1- / 2-channel: 1, 2
Emergency Stop Module With Time Delay BI 5928
Width: 67,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: DC
Thermal current Ith max.: 5 A
1- / 2-channel: 1, 2
Emergency stop module IP 5924
Width: 70 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: AC, AC/DC
Thermal current Ith max.: 5 A
1- / 2-channel: 1, 2
Emergency stop module with voltage failure detection BL 5903
Width: 90 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: AC
Thermal current Ith max.: 5 A
1- / 2-channel: 1, 2
Emergency stop module BN 5930.48/203
Width: 100 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: AC, DC
Thermal current Ith max.: 10 A
1- / 2-channel: 1, 2
Emergency stop module BN 5930.48/204
Width: 100 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: AC, DC
Thermal current Ith max.: 10 A
1- / 2-channel: 1, 2
Emergency stop module BN 5983
Width: 100 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: AC, DC
Thermal current Ith max.: 10 A
1- / 2-channel: 1, 2
Speed monitor, speed monitoring
Speed or standstill monitor BH 5932
Width: 45 mm
Classification: For initiators and encoders
Cat. / PL acc. to EN ISO 13849-1: 3/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: AC, AC/DC
Thermal current Ith max.: 4 A
1- / 2-channel: 2
Standstill monitor LH 5946
Width: 45 mm
Classification: Sensorless
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: AC, DC
Thermal current Ith max.: 5 A
1- / 2-channel: 2
Measuring motor voltage max.: 690 V
Speed and standstill monitor UH 5947
Width: 45 mm
Classification: For initiators and encoders
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: DC, AC/DC
Thermal current Ith max.: 5 A
1- / 2-channel: 2
Speed monitor UH 6932
Width: 45 mm
Classification: For initiators and encoders
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: DC
Thermal current Ith max.: 8 A
1- / 2-channel: 2
Speed and frequency monitor UH 6937
Width: 45 mm
Classification: Sensorless
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: DC
Thermal current Ith max.: 8 A
1- / 2-channel: 2
Measuring motor voltage max.: 690 V
Standstill monitor UG 6946
Width: 22,5 mm
Classification: Sensorless
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: DC
Thermal current Ith max.: 5 A
1- / 2-channel: 2
Measuring motor voltage max.: 690 V
Multifunctional safety solutions
Multifunctional safety timer with instantaneous contacts UG 6960
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: DC
Thermal current Ith max.: 8 A
1- / 2-channel: 2
Application: Not-Aus, Lichtgitter, Schaltmatte, Schutztür, Zweihand
Safe output contacts, redundant NO contacts: 4
Multifunctional safety timer UG 6961
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: DC
Thermal current Ith max.: 8 A
1- / 2-channel: 2
Application: Not-Aus, Lichtgitter, Schaltmatte, Schutztür, Zweihand
Safe output contacts, redundant NO contacts: 2
Multifunctional safety module UG 6970
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: DC
Thermal current Ith max.: 8 A
1- / 2-channel: 2
Application: Not-Aus, Lichtgitter, Schaltmatte, Schutztür, Zweihand
Safe output contacts, redundant NO contacts: 4
Multifunctional safety module UG 6980
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: DC
Thermal current Ith max.: 8 A
1- / 2-channel: 2
Application: Not-Aus, Lichtgitter, Schaltmatte, Schutztür, Zweihand
Safe output contacts, redundant NO contacts: 2
Multifunction safety module BH 5910
Width: 45 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Nominal voltage: DC
Thermal current Ith max.: 5 A
1- / 2-channel: 1, 2
Application: Not-Aus, Lichtgitter, Schutztür, Zweihand
Safe output contacts, redundant NO contacts: 3
Control Unit BH 5911
Width: 45 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Application: Not-Aus, Lichtgitter
Safe output contacts, redundant NO contacts: 2, 3
Input module BG 5913.08/_0___
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Application: Not-Aus, Lichtgitter, Schutztür, Zweihand
Safety integrity level according to EN 574: lll A, lll C
Input module BG 5913.08/_1___
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Application: Not-Aus, Lichtgitter, Schutztür, Zweihand
Safety integrity level according to EN 574: lll C
Input module BG 5913.08/_2___
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Application: Not-Aus, Lichtgitter, Schutztür, Zweihand
Safety integrity level according to EN 574: lll C
Input module BG 5913.08/_3___
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Application: Not-Aus, Lichtgitter, Zweihand
Safety integrity level according to EN 574: lll C
Input Module BH 5913.08/_0___
Width: 45 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Application: Not-Aus, Lichtgitter, Schutztür, Zweihand
Safety integrity level according to EN 574: lll A, lll C
Galvanically isolated inputs: Yes
Input Module BG 5914.08/_0___
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 2/d
SIL CL acc. to IEC/EN 62061: 2
Application: Not-Aus, Lichtgitter
Input Module BH 5914.08/_0___
Width: 45 mm
Cat. / PL acc. to EN ISO 13849-1: 2/d
SIL CL acc. to IEC/EN 62061: 2
Application: Not-Aus, Lichtgitter
Galvanically isolated inputs: Yes
Input Module BG 5915.08/_1___
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Application: Not-Aus, Lichtgitter, Schutztür
Input Module BH 5915.08/_1___
Width: 45 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Application: Not-Aus, Lichtgitter, Schutztür
Galvanically isolated inputs: Yes
Output Module With Output Contacts BG 5912
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Safe output contacts, redundant NO contacts: 3, 4
Safe output contacts, time delay: 2, 3
Diagnostic Module for Profibus DP BH 5552
Width: 45 mm
Control unit UG 6911.10
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Safety inputs: 8
2-channel safety outputs OSSD: 2
Control unit UG 6911.12/080
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Safety inputs: 8
1-channel safety outputs OSSD: 4
Input / Output module UG 6916.10
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Safety inputs: 8
2-channel safety outputs OSSD: 2
Input / Output module UG 6916.12/080
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Safety inputs: 8
1-channel safety outputs OSSD: 4
Input module UG 6913.08
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Safety inputs: 8
Input module UG 6913.12
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Safety inputs: 12
Input module UG 6913.16
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Safety inputs: 16
Output module OSSD UG 6912.02
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
2-channel safety outputs OSSD: 2
Output module OSSD UG 6912.04
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
2-channel safety outputs OSSD: 4
Output module relay UG 6912.14
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Safety NO contacts: 1 x 2
NC contacts: 1 x 1
Output module relay UG 6912.28
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Safety NO contacts: 2 x 2
NC contacts: 2 x 1
Output module relay UG 6914.04/000
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Safety NO contacts: 4
Output module relay UG 6914.04/008
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Safety NO contacts: 4
Speed monitoring module UG 6917/002
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Signal generator: 2 Proximity sensors
Speed monitoring module UG 6917/102
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Signal generator: 2 Proximity sensors, 1 TTL Encoder
Speed monitoring module UG 6917/202
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Signal generator: 2 Proximity sensors, 1 HTL Encoder
Speed monitoring module UG 6917/302
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Signal generator: 2 Proximity sensors, 1 Sin/Cos Encoder
Speed monitoring module UG 6917/112
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Signal generator: 2 Proximity sensors, 2 TTL Encoder
Speed monitoring module UG 6917/222
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Signal generator: 2 Proximity sensors, 2 HTL Encoder
Speed monitoring module UG 6917/332
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Signal generator: 2 Proximity sensors, 2 Sin/Cos Encoder
Bus Extender UG 6918
Width: 22,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Fieldbus module CANopen UG 6951
Width: 22,5 mm
Fieldbus module PROFIBUS DP UG 6952
Width: 22,5 mm
Fieldbus module PROFINET UG 6954
Width: 22,5 mm
Fieldbus module Ethernet/IP UG 6955
Width: 22,5 mm
Fieldbus module EtherCAT UG 6956
Width: 22,5 mm
Fieldbus module Modbus TCP/IP UG 6958
Width: 22,5 mm
Fieldbus module Modbus RTU UG 6959
Width: 22,5 mm
Wireless Safety System
Radio controlled safety module UH 6900
Width: 45 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Frequency band: 433 / 434, 869 MHz
2-channel safety inputs max.: 3
Radio controlled safety module (Group controller) UH 6900 GC
Width: 45 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Frequency band: 433 / 434, 869 MHz
2-channel safety inputs max.: 3
Radio controlled safety module (Group receiver) UH 6900 GR
Width: 45 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
SIL CL acc. to IEC/EN 62061: 3
Frequency band: 433 / 434, 869 MHz
2-channel safety inputs max.: 3
Radio Controlled Safety Module BI 6910
Width: 67,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
Application: Not-Aus, Lichtgitter, Schutztür, Start, Wireless
Safe output contacts, redundant NO contacts: 3
NC contacts: 1
Radio controlled enabling switch RE 6910
Width: 75 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
Radio controlled safety module BI 5910
Width: 67,5 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
Application: Not-Aus, Lichtgitter, Schutztür, Start, Wireless
Safe output contacts, redundant NO contacts: 3
NC contacts: 1
Remote Control for E-Stop RE 5910
Width: 46 mm
Cat. / PL acc. to EN ISO 13849-1: 4/e
Residual current monitors, Residual current monitoring
Residual current monitor, Type A IL 5882
Width: 35 mm
Adjustable measuring ranges: 0,01 - 10, 0,01 - 30 A
Operate delay: Yes
Classification: Type A (AC, DC pulsating)
Residual current monitor, Type A SL 5882
Width: 35 mm
Adjustable measuring ranges: 0,01 - 10, 0,01 - 30 A
Operate delay: Yes
Classification: Type A (AC, DC pulsating)
Residual current monitor, Type B RN 5883
Width: 52,5 mm
Adjustable measuring ranges: 0,01 - 3 A
Operate delay: Yes
Classification: Type B (AC, DC even and pulsating)
Residual current monitor, Type A, with integrated transformer IR 5882
Width: 105 mm
Adjustable measuring ranges: 0,01 - 10, 0,01 - 30 A
Operate delay: Yes
Classification: Type A (AC, DC pulsating)
Insulation monitors
Insulation monitor MK 5880N
Width: 22,5 mm
Response value: 5 - 100 kΩ
IMD type: AC
Nominal voltage IT system: AC 0 - 500 V
Auxiliary voltage: AC, DC
Insulation monitor IL 5880
Width: 35 mm
Response value: 5 - 500 kΩ
IMD type: AC
Nominal voltage IT system: AC 0 - 500 V
Auxiliary voltage: AC, DC
Insulation monitor IL 5881
Width: 35 mm
Response value: 5 - 500 kΩ
IMD type: DC
Nominal voltage IT system: DC 12 - 280, DC 24 - 500 V
Auxiliary voltage: DC
Insulation monitor SL 5880
Width: 35 mm
Response value: 5 - 500 kΩ
IMD type: AC
Nominal voltage IT system: AC 0 - 500 V
Auxiliary voltage: AC, DC
Insulation monitor SL 5881
Width: 35 mm
Response value: 5 - 500 kΩ
IMD type: DC
Nominal voltage IT system: DC 12 - 280, DC 24 - 500 V
Auxiliary voltage: Without, AC, DC
Insulation monitor AI 897
Width: 45 mm
Response value: 10 - 80 kΩ
IMD type: AC
Nominal voltage IT system: AC 24 - 500 V
Auxiliary voltage: Without
Insulation Monitoring Relay BD 5877/241
Width: 45 mm
Response value: 200 - 2000 kΩ
IMD type: AC
Nominal voltage IT system: AC 0 - 400 V
Auxiliary voltage: AC
Insulation monitor MH 5880
Width: 45 mm
Response value: 5 - 100 kΩ
IMD type: AC
Nominal voltage IT system: AC 0 - 500 V
Auxiliary voltage: AC, DC
Insulation monitor UH 5892
Width: 45 mm
Response value: 50 kΩ
IMD type: AC, DC, AC/DC
Nominal voltage IT system: AC 0 - 400, DC 0 - 600 V
Auxiliary voltage: AC/DC
Insulation monitor IN 5880/711
Width: 52,5 mm
Classification: For medically used rooms
Response value: 50 - 500 kΩ
IMD type: AC
Nominal voltage IT system: AC 0 - 500 V
Auxiliary voltage: AC
Insulation monitor RN 5897/010
Width: 52,5 mm
Response value: 1 - 250 kΩ
IMD type: AC, DC, AC/DC
Nominal voltage IT system: AC 0 - 250, AC 0 - 690 (Vorschaltgerät), DC 0 - 300, DC 0 - 1000 (Vorschaltgerät) V
Auxiliary voltage: DC, AC/DC
Insulation monitor RN 5897/020
Width: 52,5 mm
Classification: For DC charging stations
Response value: 1 - 100 kΩ
IMD type: AC, DC, AC/DC
Nominal voltage IT system: AC 0 - 250, AC 0 - 690 (Vorschaltgerät), DC 0 - 300, DC 0 - 1000 (Vorschaltgerät) V
Auxiliary voltage: DC, AC/DC
Insulation monitor RN 5897/240
Width: 52,5 mm
Classification: For DC charging stations
Response value: 1 - 500 kΩ
IMD type: AC, DC, AC/DC
Nominal voltage IT system: AC 0 - 690 (Vorschaltgerät), DC 0 - 1000 (Vorschaltgerät) V
Auxiliary voltage: DC, AC/DC
Insulation monitor RN 5897/300
Width: 52,5 mm
Classification: For mobile power generators
Response value: 10 - 250 kΩ
IMD type: AC, DC, AC/DC
Nominal voltage IT system: AC 0 - 300, DC 0 - 300 V
Auxiliary voltage: DC, AC/DC
Insulation monitor RN 5897/320
Width: 52,5 mm
Classification: For DC charging stations
Response value: 1 - 100 kΩ
IMD type: AC, DC, AC/DC
Nominal voltage IT system: AC 0 - 690 (Vorschaltgerät), DC 0 - 1000 (Vorschaltgerät) V
Auxiliary voltage: DC, AC/DC
Insulation Monitor IP 5880
Width: 35 mm
Response value: 5 - 500 kΩ
IMD type: AC
Nominal voltage IT system: AC 0 - 500 V
Auxiliary voltage: AC/DC
Insulation monitor IP 5880/711
Width: 70 mm
Classification: For medically used rooms
Response value: 50 - 500 kΩ
IMD type: AC
Nominal voltage IT system: AC 0 - 500 V
Auxiliary voltage: AC
Insulation monitor RP 5888
Width: 70 mm
Response value: 5 - 5000 kΩ
IMD type: AC
Nominal voltage IT system: AC 0 - 500 V
Auxiliary voltage: AC/DC
Insulation monitor LK 5894
Width: 90 mm
Response value: 1 - 250 kΩ
IMD type: AC, DC, AC/DC
Nominal voltage IT system: AC 0 - 690, DC 0 - 690 V
Auxiliary voltage: DC
Insulation monitor LK 5895
Width: 90 mm
Classification: For photovoltaic systems
Response value: 1 - 250 kΩ
IMD type: AC, DC, AC/DC
Nominal voltage IT system: AC 0 - 1000, DC 0 - 1000 V
Auxiliary voltage: DC
Insulation monitor LK 5896
Width: 90 mm
Classification: For photovoltaic systems
Response value: 1 - 250 kΩ
IMD type: AC, DC, AC/DC
Nominal voltage IT system: AC 0 - 1000, DC 0 - 1000 V
Auxiliary voltage: DC
Insulation monitor LK 5896/900
Width: 90 mm
Response value: 1 - 250 kΩ
IMD type: AC, DC, AC/DC
Nominal voltage IT system: AC 0 - 1000, DC 0 - 1000 V
Auxiliary voltage: DC
Insulation Monitor EH 5878
Width: 96 mm
Response value: 50 kΩ
IMD type: AC
Nominal voltage IT system: AC 0 - 500 V
Auxiliary voltage: AC
Insulation monitor AN 5873
Width: 100 mm
Response value: 50 kΩ
IMD type: AC, DC, AC/DC
Nominal voltage IT system: 3AC 24 - 690, DC 0 - 1000 V
Auxiliary voltage: AC
Insulation Monitor AN 5892
Width: 100 mm
Response value: 50 kΩ
IMD type: AC, DC, AC/DC
Nominal voltage IT system: AC 0 - 1000, DC 0 - 1500 V
Auxiliary voltage: AC
Insulation monitor AN 5892/800
Width: 100 mm
Response value: 50 kΩ
IMD type: DC
Nominal voltage IT system: DC 100 - 1000 V
Auxiliary voltage: AC
IT Line Monitor IR 9112/710
Width: 105 mm
Response value: 50 kΩ
IMD type: AC
Nominal voltage IT system: AC 0 - 300 V
Auxiliary voltage: AC
IT Line Monitor IS 9112/711
Width: 140 mm
Response value: 50 - 500 kΩ
IMD type: AC
Nominal voltage IT system: AC 0 - 300 V
Auxiliary voltage: AC
IT Line Monitor IS 9112/712
Width: 140 mm
Response value: 50 - 500 kΩ
IMD type: AC
Nominal voltage IT system: AC 0 - 300 V
Auxiliary voltage: AC
Smart motor starters, multifunctional motor starters
Smart motorstarter UG 9256
Width: 22,5 mm
1- / 3-phase: 3
Auxiliary voltage: DC 24 V
Load voltage up to: 3AC 200 - 480 V
Load current up to: 9 A
Smart motorstarter with autom. phase sequence correction UG 9256/804
Width: 22,5 mm
1- / 3-phase: 3
Auxiliary voltage: DC 24 V
Load voltage up to: 3AC 200 - 480 V
Load current up to: 9 A
Smart motorstarter with autom. phase sequence correction UG 9256/807
Width: 22,5 mm
1- / 3-phase: 3
Auxiliary voltage: DC 24 V
Load voltage up to: 3AC 200 - 480 V
Load current up to: 9 A
Smart motorstarter, for Modbus UG 9410
Width: 22,5 mm
1- / 3-phase: 3
Auxiliary voltage: DC 24 V
Load voltage up to: 3AC 200 - 480 V
Load current up to: 5 A
Bus interface: Modbus RTU
Smart motorstarter, for Modbus UG 9411
Width: 22,5 mm
1- / 3-phase: 1
Auxiliary voltage: DC 24 V
Load voltage up to: AC 230 V
Load current up to: 7 A
Bus interface: Modbus RTU
Softstarters
Softstarter with softstop UG 9019
Widths: 22,5 mm
Load voltage up to: 3AC 480 V
For three-phase motors, 400 V up to: 4 kW
Softstarter IL 9017
Widths: 35 mm
Load voltage up to: AC 230 V
For single-phase motors, 230 V up to: 1,5 kW
Softstarter with softstop IL 9017/300
Widths: 35 mm
Load voltage up to: AC 230 V
For single-phase motors, 230 V up to: 1,5 kW
Softstarter SL 9017
Widths: 35 mm
Load voltage up to: AC 230 V
For single-phase motors, 230 V up to: 1,5 kW
Softstarter BA 9010
Widths: 45 mm
Load voltage up to: 3AC 230 / 400 V
For three-phase motors, 400 V up to: 5,5 kW
For single-phase motors, 230 V up to: 3 kW
Softstarter With Softstop BA 9018
Widths: 45 mm
Load voltage up to: 3AC 400 V
For three-phase motors, 400 V up to: 5,5 kW
Softstarter with softstop BA 9019
Widths: 45 mm
Load voltage up to: 3AC 460 V
For three-phase motors, 400 V up to: 5,5 kW
Softstarter with softstop BA 9026
Widths: 45 mm
Load voltage up to: 3AC 460 V
For three-phase motors, 400 V up to: 5,5 kW
Softstarter and softstop device GF 9016
Widths: 52,5, 45 mm
Load voltage up to: 3AC 400 V
For three-phase motors, 400 V up to: 22 kW
Softstarter UH 9018
Widths: 45 mm
Load voltage up to: 3AC 400 V
For three-phase motors, 400 V up to: 7,5 kW
Softstarter PF 9015
Widths: 67,5 mm
Load voltage up to: 3AC 480 V
For three-phase motors, 400 V up to: 7,5 kW
Softstarter for heating pumps PF 9029
Widths: 67,5 mm
Load voltage up to: 3AC 460 V
For three-phase motors, 400 V up to: 18,5 kW
Softstart / Softstop with reverse function RP 9210/300
Widths: 72 mm
Load voltage up to: 3AC 400 V
For three-phase motors, 400 V up to: 0,75 kW
Softstarter BI 9025
Widths: 90 mm
Load voltage up to: 3AC 480 V
For three-phase motors, 400 V up to: 15 kW
Softstarter with DC-brake BI 9028
Widths: 90 mm
Load voltage up to: 3AC 480 V
For three-phase motors, 400 V up to: 15 kW
Softstarter For 1-phase Motors BI 9028/900
Widths: 90 mm
Load voltage up to: AC 230 V
For single-phase motors, 230 V up to: 5 kW
Softstarter BL 9025
Widths: 90 mm
Load voltage up to: 3AC 480 V
For three-phase motors, 400 V up to: 11 kW
Softstarter BN 9011
Widths: 100 mm
Load voltage up to: 3AC 230 / 400 V
For three-phase motors, 400 V up to: 11 kW
For single-phase motors, 230 V up to: 5,5 kW
Softstarter with DC-brake GF 9229
Widths: 103, 205 mm
Load voltage up to: 3AC 575 V
For three-phase motors, 400 V up to: 30 kW
Softstarter IR 9027
Widths: 105 mm
Load voltage up to: 3AC 400 V
For three-phase motors, 400 V up to: 5,5 kW
Softstarter with braking function BL 9028
Widths: 112,5 mm
Load voltage up to: 3AC 480 V
For three-phase motors, 400 V up to: 15 kW
Softstarter With DC-Brake BL 9228
Widths: 90, 112,5 mm
Load voltage up to: AC 480 V
For three-phase motors, 400 V up to: 15 kW