The Function Signal Converter DN 2050 offers four individually configurable I/O ports that can be used as analog or digital inputs or outputs. These I/O ports, as well as an additional switching output, can be combined as required using DRAGO's cross-port technology to implement various device functions. All I/O ports are fully isolated and protected against overvoltage, short-circuit and reverse polarity.
With the free PC software DRAGOset all parameters can be set individually and thus numerous additional functions can be realized.
2-Channel Isolation Amplifier DN 26000
The first active 2-channel isolation amplifier with a channel width of only 3 mm is suitable for a variety of automation tasks, especially for
applications with a high number of measuring points and where space is limited.
The input and output ranges can be selected individually for each channel via DIP switches; subsequent readjustment is not necessary thanks to the calibrated measuring range selection. A signal clipping and the cut-off frequency can also be adapted to the measuring task.
Power is supplied via the In-Rail-Bus, which ensures pre-wiring on a standard DIN rail. This significantly reduces the wiring effort.
Loop-Powered isolator
Passive Isolator DH 11000
Input: 0(4) to 20 mA 1- or 2-channel
Output: 0(4) to 20 mA
Voltage drop: < 2.3 V
Features: Protective separation, housing width: 6.2 mm
Passive Isolator DH 18
Input: 0(4) to 20 mA 1- and 2-channel versions
Output: 0(4) to 20 mA
Voltage drop: < 3 V
Features: Protective separation, housing width: 11.2 mm
Passive Isolator DH 1000
Input: 0(4) to 20 mA 1- or 2-channel
Output: 0(4) to 20 mA
Voltage drop: < 2.0 V
Features: Pluggable screw clamp terminals, protective separation,
housing width: 12.5 mm
Transmitter repeater
Repeater Power Supply DC 52100
Input: 0 to 20 mA, 4 to 20 mA, 0 to 10 V, 2 to 10 V, calibrated switchable
Output: 0 to 20 mA, 4 to 20 mA, 0 to 10 V, 2 to 10 V, calibrated switchable
Power supply: 24 V DC
Features: Protective separation, housing width: 6.2 mm
Repeater Power Supply HART DC 52500
Input: 0/4 to 20 mA Energization of 2-wire transmitters
Output: 0/4 to 20 mA Bidirectional HART communication
Power supply: 24 V DC
Features: Protective separation, housing width: 6.2 mm
Passive Transmitter Repeater DC 58
Input: 4 to 20 mA
Output: 4 to 20 mA
Voltage drop: Approx. 4.7 V
Features: Protective separation, housing width: 11.2 mm
Isolation amplifier
2-Channel Isolation Amplifier DN 26000
Inputs: 0...20 mA, 4...20 mA, 0...5 V, 0...10 V
Outputs: 0...20 mA, 4...20 mA, 0...5 V, 0...10 V
Power Supply: 24 V DC via In-Rail-Bus
Features: Calibrated signal setting, protective separation,
housing width: 6.2 mm
Isolation Amplifier DN 25000
Input: 0 to 20 mA, 4 to 20 mA, 0 to 10 V, 2 to 10 V, calibrated switchable
Output: 0 to 20 mA, 4 to 20 mA, 0 to 10 V, 2 to 10 V, calibrated switchable
Power supply: 24 V DC
Features: Calibrated signal setting, protective separation, housing width: 6.2 mm
Isolation Amplifier DN 28
Input: 0 to 20 mA, 4 to 20 mA, 0 to 10 V
Output: 0 to 20 mA, 4 to 20 mA, 0 to 10 V
Power supply: 24 V AC/DC
Features: Protective separation, housing width: 11.2 mm
Isolation Amplifier DN 2000
Input: 0...20 mA, 4...20 mA, 0...10 V
Output: 0...20 mA, 4...20 mA, 0...10 V
Power supply: 20 ... 253 V AC/DC
Features: Pluggable screw clamp terminals, calibrated signal setting,
protective separation, housing width: 12.5 mm
Isolation Amplifier DN 2400
Input: 0 to 20 mA, 4 to 20 mA, 0 to 10 V
Output: 0 to 20 mA, 4 to 20 mA, 0 to 10 V
Power supply: 20 to 253 V AC/DC
Features: Pluggable screw clamp terminals, calibrated signal setting,
housing width: 12.5 mm
Isolation Amplifier Module DN 240M
Input: 0 to 20 mA, 4 to 20 mA, 0 to 10 V terminal selectable
Output: 0 to 20 mA, 4 to 20 mA, 0 to 10 V terminal selectable
Power supply: 24 V DC
Features: solder-in module, Calibrated signal setting, 3-port isolation,
flat module housing for PCB assembling
Isolation signal splitter
Signal Splitter/Repeater DN 21000
Input: 0 to 20 mA, 4 to 20 mA, 0 to 5 V, 1 to 5 V, 0 to 10 V, 2 to 10 V
Output 1: 0 to 20 mA, 4 to 20 mA, 0 to 5 V, 1 to 5 V, 0 to 10 V, 2 to 10 V
Output 2: 0 to 20 mA, 4 to 20 mA, 0 to 5 V, 1 to 5 V, 0 to 10 V, 2 to 10 V
Power supply: 24 V DC
Features: Calibrated signal setting, protective separation,
housing width: 6.2 mm
Bipolar isolation amplifier
Bipolar Isolation Amplifier DB 64000
Input: 0 to ±20 mA, 0 to ±10 mA, 0 to ±10 V, 0 to ±5 V, live/dead-zero
Output: 0 to ±20 mA, 0 to ±10 mA, 0 to ±10 V, 0 to ±5 V, live/dead-zero
Power supply: 24 V DC
Features: calibrated signal setting, zero/span compensation, protective separation, housing width: 6.2 mm
Bipolar Isolation Amplifier DB 68
Input: ±10 V, ±5 V, ±20 mA, ±10 mA,
0 to 10 V, 0 to 5 V, 0 to 20 mA,
2 to 10 V, 1 to 5 V, 4 to 20 mA
Output: 0 to 10 V, 0 to 5 V, 0 to 20 mA,
2 to 10 V, 1 to 5 V, 4 to 20 mA
Power supply: 24 V AC/DC
Features: Protective separation, housing width: 11.2 mm
Bipolar Isolation Amplifier DB 6200
Input: 0 to ±20 mA, 0 to ±10 mA, 0 to ±10 V, 0 to ±5 V, live/dead-zero
Output: 0 to ±20 mA, 0 to ±10 mA, 0 to ±10 V, 0 to ±5 V, live/dead-zero
Power supply: 20 to 253 V AC/DC
Features: Pluggable screw clamp terminals, zero/span compensation, protective separation, housing width: 12.5 mm
Filter Isolation Amplifier DB 6230
Input: 0 to ±20 mA, 0 to ±10 mA, 0 to ±10 V, 0 to ±5 V, live/dead-zero
Output: 0 to ±20 mA, 0 to ±10 V
Filter function Cut-off frequency: 10 Hz, 1 Hz, 0.5 Hz, 0.1 Hz
Power supply: 20 to 253 V AC/DC
Features: Pluggable screw clamp terminals, zero/span compensation, protective separation, housing width: 12.5 mm
Inverse Isolation Amplifier DB 6250
Input: 0 to 20 mA, 0 to 10 mA, 0 to 10 V, 0 to 5 V, live/dead-zero
Output: 0 to 20 mA, 0 to 10 mA, 0 to 10 V, 0 to 5 V, live/dead-zero
Characteristic: inverse characteristic
Power supply: 20 to 253 V AC/DC
Features: Pluggable screw clamp terminals, zero/span compensation, protective separation, housing width: 12.5 mm
Customer-Specific Isolation Amplifier DK 8000
Input: customer-specific
Output: customer-specific
Power supply: 20 to 253 V AC/DC
Features: Pluggable screw clamp terminals, zero/span compensation optional, protective separation, housing width: 12.5 mm
Shunt isolation amplifier
Shunt / mV Isolation Amplifier DS 75000
Input: 0 to ±60 mV, 0 to ±100 mV, 0 to ±150 mV, 0 to ±250 mV, 0 to ±300 mV, 0 to ±500 mV
Output: 0 to ±20 mA, 0 to ±10 mA, 0 to ±10 V, 0 to ±5 V, live/dead-zero
Power supply: 24 V DC
Features: signal setting with DIP switches, zero/span compensation,
protective separation, housing width: 6.2 mm
Shunt / mV Isolation Amplifier DS 78
Input: 0 to ±60 mV, 0 to ±100 mV, 0 to ±150 mV, 0 to ±300 mV
Output: 0 to 10 V, 2 to 10 V, 0 to 5 V, 1 to 5 V, 0 to 20 mA, 4 to 20 mA
Power supply: 24 V AC/DC
Features: Protective separation, housing width: 11.2 mm
Shunt / mV Isolation Amplifier DS 7200
Input: 0 to ±60 mV, 0 to ±100 mV, 0 to ±150 mV, 0 to ±250 mV, 0 to ±300 mV, 0 to ±500 mV
Output: 0 to ±20 mA, 0 to ±10 mA, 0 to ±10 V, 0 to ±5 V, live/dead-zero
Power supply: 20 to 253 V AC/DC
Features: Pluggable screw clamp terminals, zero/span compensation,
protective separation, housing width: 12.5 mm
Shunt / mV Isolation Amplifier DS 7400
Input: 0 to 60 mV, 0 to 150 mV
Output: 0 to 20 mA, 4 to 20 mA, 0 to 10 V
Power supply: 20 to 253 V AC/DC
Features: Pluggable screw clamp terminals, calibrated signal setting, housing width: 12.5 mm
Alarm units
Limit Alarm Unit DG 35200
Input: 0(4) to 20 mA, ±20 mA, 0 to 10 mA, ±10 mA, ABS 20 mA
0 to 10 V, ±10 V, 0 to 5 V, ±5 V, ABS 10 V
4 to 20 mA / NE43
Output relay: 250 V AC, 30 V DC, 2 A
Power supply: 24 V DC
Features: Signal on In-Rail-Bus E (supply circuit) at device failure, cable break und short circuit
Housing width: 6.2 mm
Current Monitoring Relay DG 35300
Input: 0 to 5 A AC/DC
0 to 150 mV
Output relay: 250 V AC, 30 V DC, 2 A
Power supply: 24 V DC
Features: Group message at In-Rail-Bus E at device failure and alarm
Housing width: 6.2 mm
Switch Amplifier DG 31000
Input: NAMUR, SN, S0, DC sensor, contact, V AC/DC, PNP, NPN and Push-Pull
Output relay: 250 V AC, 30 V DC, 2 A
Power supply: 24 V DC
Features: Signal on In-Rail-Bus E (supply circuit) at device failure, cable break und short circuit
Housing width: 6.2 mm
Alarm Unit DG 3200
Input: Standard signals 0(4) to 20 mA, ±20 mA, 0 to 10 V, ±10 V (switchable)
Output relays: 250 V AC/DC, 6 A
Power supply: 24 V AC/DC
Features: Relay with high power handling, protective separation,
housing width: 22.5 mm
Current Measuring Contactor DG 3300
Input: 0 to 1 A, ±1 A, 0 to 5 A, ±5 A (switchable)
Output relays: 250 V AC/DC, 6 A
Power supply: 24 V AC/DC
Features: Relay with high power handling, protective separation,
housing width: 22.5 mm
Voltage Measuring Contactor DG 3400
Input: 24 V, 48 V, 100 V, 120 V, 250 V, 500 V (switchable)
Output relays: 250 V AC/DC, 6 A
Power supply: 24 V AC/DC
Features: Relay with high power handling, protective separation,
housing width: 22.5 mm
Temperature Alarm Unit DG 3600
Sensor input: Pt100, Pt200, Pt500, Pt1000 (switchable)
Output relays: 250 V AC/DC, 6 A
Power supply: 24 V AC/DC
Features: Relay with high power handling, protective separation,
housing width: 22.5 mm
Transmitter
Temperature Transmitter DT 45000
Sensor Input: Resistors: Pt 100, Pt 200, Pt 500, Pt 1000, Ni 100, Ni 200, Ni 500, Ni 1000;
Thermocouple: B, E, J, K, L, N, R, S, T, U, W5Re_W26Re, W3Re_W25Re;
KTY, resistor, mV and potentiometer measuring
Output: 0 to 20 mA, 4 to 20 mA, 0 to 10 mA, 2 to 10 mA
0 to 5 V, 0 to 10 V, 1 to 5 V, 2 to 10 V
Measurement Ranges: -270 to +2315 °C, according to sensor type
Power Supply: 24 V DC
Features: Protective Separation, Housing width: 6.2 mm
Pt Temperature Transmitter DT 45200
Sensor Input: Pt 100, Pt 200, Pt 500, Pt 1000, Pt 2000
JPt 50, JPt 100
Output: 0 to 20 mA, 4 to 20 mA, 0 to 5 V, 0 to 10 V
Measurement Ranges: -200 to +850 °C, according to sensor type
Power Supply: 24 V DC
Features: Protective Separation, Housing width: 6.2 mm
Ni Temperature Transmitter DT 45400
Sensor Input: Ni 100, Ni 200, Ni 500, Ni 1000 acc. DIN 43760 (TK6180)
Ni 120 (TK6720), Ni 1000 (TK5000), Ni 1000 (TK6370)
Output: 0 to 20 mA, 4 to 20 mA, 0 to 5 V, 0 to 10 V
Measurement Ranges: -50 to +250 °C, according to sensor type
Power Supply: 24 V DC
Features: Protective Separation, Housing width: 6.2 mm
KTY Temperature Transmitter DT 45600
Sensor Input: Measuring input for all KTY temperature sensors
Output: 0 to 20 mA, 4 to 20 mA, 0 to 5 V, 0 to 10 V
Measurement Ranges: -50 to +300 °C, according to sensor type
Power Supply: 24 V DC
Features: Protective Separation, Housing width: 6.2 mm
TC Temperature Transmitter DT 45800
Sensor Input: Thermocouple Type A, B, C, D, E, J, K, L, N, R, S, T, U
Output: 0 to 20 mA, 4 to 20 mA, 0 to 5 V, 0 to 10 V
Measurement Ranges: -200 to +2500 °C, according to type of thermocouple
Power Supply: 24 V DC
Features: Protective Separation, Housing width: 6.2 mm
Resistance Transmitter DR 41
Mesuring ranges: Fixed ranges within 20 Ohm ... 1 MOhm, see product line
Output: 0 to 20 mA, 4 to 20 mA, 0 to 5 V, 1 to 5 V, 0 to 10 V, 2 to 10 V
Power supply: 24 V AC/DC
Features: Protective Separation, housing width: 11.2 mm
Temperature Transmitter DR 44
Sensor input: Pt 100, 4-wire connection
Output: 0 to 20 mA, 4 to 20 mA, 0 to 5 V, 1 to 5 V, 0 to 10 V, 2 to 10 V
Ranges: -100 to +450 °C (32 Types)
Power supply: 24 V AC/DC
Features: Protective Separation, housing width: 11.2 mm
Temperature Transmitter DR 48
Sensor input: Pt 100, 2- or 3-wire connection
Output: 0 to 20 mA, 4 to 20 mA, 0 to 5 V, 1 to 5 V, 0 to 10 V, 2 to 10 V
Ranges: -100 to +450 °C (32 types)
Power supply: 24 V AC/DC
Features: Protective Separation, housing width: 11.2 mm
Temperature Transmitter DR 49
Sensor input: Pt 1000, 2- or 3-wire connection
Output: 0 to 20 mA, 4 to 20 mA, 0 to 5 V, 1 to 5 V, 0 to 10 V, 2 to 10 V
Ranges: -100 to +450 °C (32 types)
Power supply: 24 V AC/DC
Features: Protective Separation, housing width: 11.2 mm
Potentiometer Transmitter DR 4310
Input signal: Potentiometer 500 Ohm to 100 kOhm
Output signal: 0 to 20 mA, 4 to 20 mA, ±20 mA, 0 to 10 mA, 2 to 10 mA, ±10 mA
0 to 10 V, 2 to 10 V, ±10 V, 0 to 5 V, 1 to 5 V, ±5V
Power supply: 20 to 253 V AC/DC
Features: Pluggable screw clamp terminals, zero/span compensation,
protective separation, housing width: 12.5 mm
Temperature Transmitter DR 4700
Sensor input: Pt 100, Pt 1000
Output: 0 to 20 mA, 4 to 20 mA, 0 to 10 V
Ranges: -100 to +600 °C
Power supply: 20 to 253 V AC/DC
Features: Pluggable screw clamp terminals, sensor diagnostics, protective separation, housing width: 12.5 mm
Modbus RTU
New ultra-compact Modbus RTU I/O Modules
- Freely scalable up to 247 units in one Modbus segment
- Extremely slim, only 6.2 mm installation width
- Easy configurable via DIP switches or USB interface
- Highest accuracy and temperature stability
- Protective galvanic separation between all circuits, test voltage 3 kV AC
- In-Rail-Bus Connector for Power and Modbus
- Protection against overvoltage, polarity error and short circuit at all terminals
- Long service life, extremely low failure rate due to reduced self-heating
- Made in Germany, 5 Years Warranty
The DRAGO Modbus RTU I/O Modules combine complex field and control requirements such as protective galvanic isolation, maximum signal integrity and highest reliability with fast measurement data conversion and field bus provision.
Up to 4 fully isolated I/Os are available in the 6.2 mm slim modules. The configuration can be made via DIP switch or USB interface. In addition to standard signals, mA, V, mV, R, Pot, Hz, PWM and all current industrial sensors can be processed.
Power supply and bus connections are pre-wired on standard DIN rail by the In-Rail-Bus. All terminals are protected against short circuit, overvoltage and polarity reversal. The protective galvanic isolation with 3 kV test voltage permits working voltages up to 300 V. A low bus load allows up to 247 modules (988 I/Os) in one Modbus segment.
The low-power design ensures minimum self-heating for a wide temperature range. The high separation quality and short response time guarantee an economic integration in new plants and retrofit projects.
DMB 96500 - Universal AI/DI Module
- High performance measuring input for all industrial sensors
- Uni-/Bipolar and TRMS capture of current and voltage
- Easy configurable by DIP switch or USB interface
- 15 User Settings, directly selectable via DIP switches
- Highest accuracy, measuring resolution up to 24 bit
- Fast measured value processing, high data rate
- Input: Pt, Ni, TC, KTY, R, Pot, mV, V, mA DC/TRMS, Frequency, PWM
- Additional functions: Transmitter Supply 16 V; TRMS; NAMUR
DMB 96100 - Standard Signal AI Module
- Precise capture of industrial standard signals
- Excellent EMC performance and noise suppression
- Supply of 2/3-wire transmitters
- Easy configuration, fast commissioning
- Maximum reliability and durability
- Input: 0/4 to 20 mA; 0/2 to 10 V; 0/1 to 5 V
- Additional functions: Transmitter Supply 16 V
DMB 96200 - 4 Channel AI Module
- Measuring and processing of 4 industrial standard signals
- Each channel programmable as current or voltage input
- All inputs individually safely galvanically isolated
- Fast signal acquisition, short processing times
- Extremely low costs per input channel
- Input: 0/4 to 20 mA; 0/2 to 10 V
- Additional functions: 4 DI; 4 DO
DMB 96400 - 4 Channel 2 AI / 2 AO Module
- Measuring and processing of 2 industrial standard signals
- Each channel programmable as current or voltage in/output
- All inputs individually safely galvanically isolated
- Fast signal acquisition, short processing times
- Extremely low costs per input channel
- Input / Output: 0/4 to 20 mA; 0/2 to 10 V
- Additional functions: 2 DI; 4 DO
DMB 96700 - 4 Channel DI/DO Module
- 4 independent controllable digital I/O channels
- Each channel programmable as input or output
- Extensive programmable operating functions
- Universal Open-Collector output
- Status indication for each I/O channel
- Input / Output: DI: 5 V / 12 V / 24 V; DO: Open-Collector
- Additional functions: Frequency, Counter, Puls, PWM
DMB 96800 - 4 Channel Relay Module
- 4 independent power relays, make or break contact
- Programmable switch-ON and switch-OFF behavior
- Extensive programmable operating functions
- Monitoring functions for operating conditions
- Status indication for each relay
- Contact: AC: 250 V / 2 A; DC: 30 V / 2 A
- Additional functions: ON / OFF delay; Wiper contact; Power monitoring
Cross Reference List
For the listed device types you find the equivalent or replacement at DRAGO, e.g. for discontinued devices.
Small variations in the specifications or in the wiring are possible.
Manufacturer
Manufacturer Part No.
Manufacturer Order No.
DRAGO Part No.
Status
Description
Phoenix Contact
MCR-1CLP-I-I-00
2814016
DH 1011
Active
Passiv Isolator
Phoenix Contact
MCR-2CLP-I-I-00
2814029
DH 1012
Active
Passiv Isolator
Phoenix Contact
MCR-C-I-I-00-DC
2814508
DN 2012
Active
Isolation Amplifier
Phoenix Contact
MCR-C-I-I-04-DC
2814540
DN 2014
Active
Isolation Amplifier
Phoenix Contact
MCR-C-I-I-40-DC
2814524
DN 2032
Active
Isolation Amplifier
Phoenix Contact
MCR-C-I-U-0-DC
2814498
DN 2016
Active
Isolation Amplifier
Phoenix Contact
MCR-C-I-U-4-DC
2814511
DN 2036
Active
Isolation Amplifier
Phoenix Contact
MCR-C-U-I-0-DC
2814472
DN 2052
Active
Isolation Amplifier
Phoenix Contact
MCR-C-U-I-4-DC
2814537
DN 2054
Active
Isolation Amplifier
Phoenix Contact
MCR-C-U-U-DC
2814469
DN 2056
Active
Isolation Amplifier
Phoenix Contact
MCR-FL-C-UI-2UI-DCI
2814854
DN 21000
Active
Isolation Signal Splitter
Phoenix Contact
MCR-FL-C-UI-2UI-DCI-NC
2814867
DN 21000
Active
Isolation Signal Splitter
Phoenix Contact
MCR-FL-C-UI-UI-B-DCI-24/230
2864325
DB 6200
Active
Universal Isolation Amplifier
Phoenix Contact
MCR-FL-C-UI-UI-DCI-24/230
2814838
DN 2000
Active
Isolation Amplifier
Phoenix Contact
MCR-PT100-I-DC
2810337
DR 4700
Active
Temperature Transmitter
Phoenix Contact
MCR-PT100-U-DC
2810311
DR 4700
Active
Temperature Transmitter
Phoenix Contact
MCR-SL-1CLP-I-I-00-4KV
2814841
DH 1021
Active
Passiv Isolator
Phoenix Contact
MCR-SL-PT100-SP
2814948
DG 3600
Active
Temperature Alarm Unit
Knick
IsoAmp3000/4000
3820Mh
DN 240M
Active
Isolation Amplifier Module
Knick
IsoAmp3000/4001
4820Mh
DN 240M
Active
Isolation Amplifier Module
Knick
IsoAmp3000/4002
3310Mg
DN 240M
Active
Isolation Amplifier Module
Knick
IsoAmp3000/4003
4310Mg
DN 240M
Active
Isolation Amplifier Module
Knick
IsoTrans A 47, 1-kanalig
A47H1/1
DH 1011
Active
Passiv Isolator
Knick
IsoTrans A 47, 2-kanalig
A47H1/2
DH 1012
Active
Passiv Isolator
Knick
VariTrans A 26000
A26000H1
DB 6200
Active
Universal Isolation Amplifier
Knick
VariTrans B 13000
B13000F1
DN 2400
Active
Isolation Amplifier
Knick
VariTrans P 15000
P15000H1
DN 2000
Active
Isolation Amplifier
Lütze
CCR 6-0100
750100
DG 3300
Active
Current Measuring Contactor
Lütze
CNAR 6-0110
750110
DG 3200
Active
Alarm Unit
Lütze
CTR 6-0130
750130
DG 3600
Active
Temperature Alarm Unit
Lütze
CVR 6-0120
750120
DG 3400
Active
Voltage Measuring Contactor
ioSelect
IOS-108
755110
DG 3200
Active
Alarm Unit
ioSelect
IOS-138
755100
DG 3300
Active
Current Measuring Contactor
ioSelect
IOS-148
755120
DG 3400
Active
Voltage Measuring Contactor
Cabur
CWCR 6-0100
756100
DG 3300
Active
Current Measuring Contactor
Cabur
CWNAR 6-0110
756110
DG 3200
Active
Alarm Unit
Cabur
CWVR 6-0120
756120
DG 3400
Active
Voltage Measuring Contactor
Accessories an spare parts
DZU 1451 / DZU 1452 :: In-Rail-Mini Analog
Power terminal for installation of small applications with In-Rail-Bus and up to 7 devices
DZU 1461 / DZU 1462 :: In-Rail-Mini Modbus
Power terminal for installation of small Modbus applications with In-Rail-Bus and up to 7 devices
DZU 0801 :: Cross-connector for Tiny Snap
Cross-connector for looping through the power supply for up to 10 Tiny Snap, splittable
DZU 1120 :: Euroboard for Analog Embedded modules
Europa card for up to 4 Analog Embedded modules
Module configuration: with solder jumpers at the europa card
Connector: Type F according to DIN 41612
Front construction: 128,7 mm x 20,0 mm (3HE x 4TE)
DZU 1201 :: Programming Interface
Programming interface for transmitters
USB programming cable
DZU 1401 :: In-Rail-Bus Power Terminal
Power terminal for installations with In-Rail-Bus system for standard applications with 4.5 A output current.
DZU 1402 :: In-Rail-Bus Power Terminal
Power terminal for installations with In-Rail-Bus system with two separate and reverse polarity protected voltage inputs allow a redundant voltage supply and a maximum current of 3 A.
DZU 1410 ... 1431 :: In-Rail-Bus Bus Connector Kit
5-wire bus system for DIN rail,
various DIN rail profiles and bus lengths
DZU 1439 :: In-Rail-Bus Safety Caps
Safety caps right/left as a spare part
(The kits includes safety caps)
dienelectrics@gmail.com
0909186879 
