FRASER PRODUCT CATEGORIES

DC SHORT RANGE ANTI-STATIC BARS

Ideal for eliminating static electricity at distances of 25 mm to 150 mm and at speeds of up to 1500 m/minute. Powered by 24 V DC, these short-range ionisers have all of the electronics and controls built into the body of the bar. They are suitable for most industrial processes including food manufacture and pharmaceutical, printing, plastics and packaging applications. In fact, anywhere there is a sheet or web that requires neutralisation.

X-12L
INTELLIGENT STATIC ELIMINATOR
X-12L
INTELLIGENT STATIC ELIMINATOR
The X-12L is a powerful and intelligent 24 V DC static eliminator, providing 12 kV of ionising power for longer distances up to 600 mm.
X-12F
INTELLIGENT STATIC ELIMINATOR
X-12F
INTELLIGENT STATIC ELIMINATOR
The X-12F supersedes NEOS 12F as the most powerful 24 V DC short range intelligent ionising bar with 12 kV of neutralisation power for high speed applications.
NEOS 12F
INTELLIGENT STATIC ELIMINATOR
NEOS 12F
INTELLIGENT STATIC ELIMINATOR
The NEOS 12F is the most powerful 24 V DC short range intelligent ionising bar with 12 kV of neutralisation power for high speed applications.
3024F
STATIC ELIMINATOR
3024F
STATIC ELIMINATOR
The 3024F is a compact and powerful short range static eliminator, with built-in electronics and 24 V DC supply.
3014
STATIC ELIMINATOR
3014
STATIC ELIMINATOR
The 3014 Static Eliminator offers all of the performance and control benefits of 24 V DC technology in a compact and inexpensive design.
3024 ULTRA-COMPACT
STATIC ELIMINATOR
3024 ULTRA-COMPACT
STATIC ELIMINATOR
The 3024 Ultra-Compact provides powerful, close-range ionisation in confined spaces.
3024 COMPACT
STATIC ELIMINATOR
3024 COMPACT
STATIC ELIMINATOR
The 3024 Compact is a short range static eliminator that brings the benefits of 24 V DC technology to smaller applications.
3024 DC
RING IONISER
 

DC LONG RANGE ANTI-STATIC BARS

Fraser’s pulsed-DC static eliminators with built-in electronics and controls can provide long range or wide area ionisation where a short range bar cannot be fitted. They can neutralise static charges at distances from 150 mm to 1500+ mm, with or without air assistance. High-power ionisation and in-built intelligence mean some models are ideally suited to accommodate the changing geometry associated with winders or 3-dimensional products.

X-33
INTELLIGENT STATIC ELIMINATOR
X-33
INTELLIGENT STATIC ELIMINATOR
The X-33 is a 33 kV static eliminator with built-in field polarity sensing and adaptive ionisation for long range and wide area applications.
NEOS 30
INTELLIGENT STATIC ELIMINATOR
NEOS 30
INTELLIGENT STATIC ELIMINATOR
The NEOS 30 pulsed DC bar provides an integrated 30 kV of neutralisation power with intelligent sensing for distances between 200 -1500mm.
NEOS 20
INTELLIGENT STATIC ELIMINATOR
NEOS 20
INTELLIGENT STATIC ELIMINATOR
The NEOS 20 is a high performance, pulsed DC 20 kV anti-static bar with reactive intelligence for operating distances up to 800 mm.
X-20
INTELLIGENT STATIC ELIMINATOR
X-20
INTELLIGENT STATIC ELIMINATOR
The X-20 is a high performance, pulsed DC 20 kV anti-static bar with adaptive intelligence for operating distances up to 800 mm.
NEOS 12L
INTELLIGENT STATIC ELIMINATOR
NEOS 12L
INTELLIGENT STATIC ELIMINATOR
The NEOS 12L is a powerful and intelligent 24 V DC static eliminator, providing 12 kV of ionising power for longer distances up to 600 mm.
3024L
STATIC ELIMINATOR
3024L
STATIC ELIMINATOR
The 3024L is a compact and powerful static eliminator, with built-in electronics and 24 V DC supply.
3850 IONSTORM
STATIC ELIMINATOR
3850 IONSTORM
STATIC ELIMINATOR
The 3850 Ionstorm system uses advanced pulsed DC ionisation technology for static neutralisation at long distances without air assistance.
NEOS 30 OEM
STATIC ELIMINATOR
NEOS 30 OEM
STATIC ELIMINATOR
The NEOS 30 OEM is a long range 24 V DC ioniser with PLC-automated range control for manufacturers of converting and winding machinery.
2050 SERIES
IONISED AIR BLOWERS
 

AC ANTI-STATIC BARS & POWER UNITS

For less demanding static elimination issues, Fraser’s AC anti-static bars can provide a lower cost alternative to DC bars. They are powered by an external high voltage power unit and benefit from a compact, low-profile design. AC bars can be installed in much smaller spaces within machinery or processes where short range neutralisation is needed. The ionisation range is up to approx. 150 mm but can be extended to beyond 500 mm with the addition of air.

1200 / 1250-S
STATIC ELIMINATORS
1200 / 1250-S
STATIC ELIMINATORS
Powerful performance and market-leading reliability make the 1250 and 1250-S the first choice AC static eliminators for manufacturers.
EX-1250
EX STATIC ELIMINATOR
EX-1250
EX STATIC ELIMINATOR
The EX-1250 is a high performance static eliminator with ATEX certification for use in hazardous areas.
1260 / 1265
SINGLE POINT IONISERS
1260 / 1265
SINGLE POINT IONISERS
The 1260 and 1265 are extremely compact, high performance static eliminators suitable for neutralising the static charge on small objects and in restricted spaces.
1100 / 1100-S
STATIC ELIMINATORS
1100 / 1100-S
STATIC ELIMINATORS
The compact 1100 and 1100-S Static Eliminators are shockless, high performance ionisers for modern manufacturing.
1255
STATIC ELIMINATOR
1255
STATIC ELIMINATOR
The 1255 Static Eliminator is a version of the best-selling 1250-S anti-static bar with a detachable cable.
1250 AIR BAR
STATIC ELIMINATOR
1250 AIR BAR
STATIC ELIMINATOR
The 1250 Air Bar uses low pressure compressed air to extend the effective static neutralisation range of the 1250, 1250-S or EX-1250 bars to over 500 mm.
HP50-ION
POWER UNIT
HP50-ION
POWER UNIT
The HP50-ION offers the added benefit of an Iontis performance monitoring system.
HP50-F
POWER UNIT
HP50-F
POWER UNIT
The HP50-F is a power unit designed to serve large systems
HP50-2
POWER UNIT
HP50-2
POWER UNIT
The HP 50-2 is a compact power unit designed to serve two static eliminators.
HP50-1
POWER UNIT
HP50-1
POWER UNIT
The HP50-1 is a compact power unit designed to serve one AC static eliminator.
EXHP
POWER UNIT
EXHP
POWER UNIT
The EXHP is a power unit designed to serve Fraser ATEX certified EX-1250 Static Eliminators for use in hazardous areas.
HP ILC
IN-LINE CONNECTOR
HP 4:1
CONNECTOR BOX
HP 4:1
CONNECTOR BOX
The HP 4:1 Connector Box allows the operator to have a cable disconnect feature anywhere in the cable system.
9055-2
POWER UNIT
9055-2
POWER UNIT
The 9055-2 is a compact power unit designed to serve up to two static eliminators.
HP50-4
POWER UNIT
HP50-4
POWER UNIT
The HP50-4 is a power unit designed to serve up to four static eliminators.
VIEW PRODUCT
2010
IONISED AIR BLOWER
2010
IONISED AIR BLOWER
The 2010 Ionised Air Blower is a long distance static eliminator with a robust aluminium construction and powerful ionisation performance.
4510
IONISED AIR NOZZLE
4510
IONISED AIR NOZZLE
The 4510 Ionised Air Nozzle produces a fast, quiet, flat jet of ionised air for efficient static neutralisation and cleaning.
6000 IONTUBE
IN-LINE IONISER
 

PASSIVE IONISERS

Fraser supplies a complete range of passive static-discharging products including brushes, tinsel and cord. Passive ionisers have an unrivalled ability to neutralise high charges and are used widely on high speed machinery processing sheets and webs. Versatile static dischargers represent a low cost static solution if they can be positioned close to two-dimensional product or typically 2-3 mm away from the material for brushes.

101 / 201
STATIC DISCHARGERS
101 / 201
STATIC DISCHARGERS
101 / 201 Static Dischargers offer high performance with unrivalled cost effectiveness.
EX-HPSD 101 / 201
EX STATIC DISCHARGERS
EX-HPSD 101 / 201
EX STATIC DISCHARGERS
EX-HPSD 101 and 201 Static Dischargers are powerful anti-static tools which have been ATEX certified for use in hazardous areas.
850 / 850E
ANTI-STATIC CORD
850 / 850E
ANTI-STATIC CORD
850 / 850E Anti-Static Cord is a versatile and cost-effective tool for neutralising unwanted static electricity.
801
ANTI-STATIC TINSEL
801
ANTI-STATIC TINSEL
801 Anti-Static Tinsel is a traditional and effective method of neutralising static electricity.
660
STATIC DISCHARGER
660
STATIC DISCHARGER
The 660 is a compact static discharger for low cost, effective static elimination.
406/7, 409/11
STATIC DISCHARGERS
 

ESD ANTI-STATIC

In electronics, the problematic levels of static electricity can be very small - just a few volts, compared to the thousands of volts which are typical in other applications. This requirement for ‘balanced ionisation’ makes many industrial static eliminators unsuitable. Fraser’s range includes low offset-voltage ionised air blowers for area coverage and compact precision ionisers for focused static neutralisation and cleaning.

8001
PRECISION POINT IONISER
8001
PRECISION POINT IONISER
The 8001 Precision Point Ioniser removes static electricity and contamination from small objects, including sensitive electronic components and assemblies.
2050 SERIES
IONISED AIR BLOWERS
 

CLEANING AND DUST REMOVAL

Static and contamination are closely connected. Fraser has developed a range of ionised air guns, air nozzles and air knives, supplemented by the powerful 4900 Roto-Clean, to neutralise the static charge and remove electrostatically attracted dust and other contaminants. Our solutions also prevent re-attraction of charged airborne particles, increasing yield and quality.

4125
IONISED AIR GUN
4125
IONISED AIR GUN
The 4125 is our most powerful ionised air gun for neutralising static electricity and removing dust and other contaminants.
4800
DC IONISED AIR NOZZLE
4800
DC IONISED AIR NOZZLE
The compact 4800 is the most powerful DC ionised air nozzle available - in both ionisation performance and cleaning capability.
4900
ROTO-CLEAN
4900
ROTO-CLEAN
The 4900 Roto-Clean combines an advanced circular ioniser with high speed, rotating air jets to create a uniquely effective tool for removing dust and contamination from industrial parts.
4510
IONISED AIR NOZZLE
4510
IONISED AIR NOZZLE
The 4510 Ionised Air Nozzle produces a fast, quiet, flat jet of ionised air for efficient static neutralisation and cleaning.
4400
IONISED AIR NOZZLE
4400
IONISED AIR NOZZLE
The 4400 is a compact, highly efficient ionised air jet consisting of a 1260 Single Point Ioniser and a proprietary air nozzle, mounted in a metal block.
4200SP
SINGLE POINT IONISED AIR NOZZLE
4200SP
SINGLE POINT IONISED AIR NOZZLE
The 4200SP Single Point Ionised Air Nozzle is a versatile and effective product for removing dust and static electricity.
4200
IONISED AIR NOZZLE SYSTEM
4200
IONISED AIR NOZZLE SYSTEM
The 4200 Ionised Air Nozzle System is a versatile and effective method of removing dust and static electricity.
8001
PRECISION POINT IONISER
8001
PRECISION POINT IONISER
The 8001 Precision Point Ioniser removes static electricity and contamination from small objects, including sensitive electronic components and assemblies.
5000 / 5100
IONISED AIR KNIVES
5000 / 5100
IONISED AIR KNIVES
The 5000 and 5100 Ionised Air Knives produce fast-moving ionised air which can neutralise static electricity and remove contaminants.
5500
IONISED AIR KNIFE SYSTEM
 

STATIC GENERATORS AND CHARGING ELECTRODES

Static Generators are widely used for providing clean, safe temporary adhesion in situations where glue or other adhesives are unsuitable, too expensive or inefficient. Complemented by our range of IML accessories, Fraser generators and charging electrodes are designed to be easily installed and integrated with your machinery. They are supplied with rugged mechanical enclosures for wall or bench mounting.

IONFIX COMPACT
STATIC GENERATOR
IONFIX COMPACT
STATIC GENERATOR
The IONFIX™ Compact is a medium performance static generator for powering many of the electrostatic charging applications in industry.
IONFIX PRO
STATIC GENERATOR
IONFIX PRO
STATIC GENERATOR
The IONFIX™ Pro range of high performance static generators delivers 150 W of power at high voltages up to 30 kV or 60 kV.
7130 / 7150 / 7160
GENERATOR BARS
7130 / 7150 / 7160
GENERATOR BARS
7130/7150/7160 Generator Bars provide a safe, controllable, reliable and cost-effective method of applying static charge for temporary adhesion.
7090 / 7095
STATIC PINNERS
7090 / 7095
STATIC PINNERS
The 7090 and 7095 are static pinners for electrostatic charging and pinning of small areas and objects.
7093
STATIC EDGE PINNER
7093
STATIC EDGE PINNER
The 7093 has been specifically designed to allow accurate, high performance edge pinning on film using Fraser market-leading static generation systems.
7080 / 7081
GENERATOR BARS
7080 / 7081
GENERATOR BARS
7080 and 7081 Generator Bars provide a safe, controllable, reliable and cost-effective method of applying static charge for temporary adhesion.
IONFIX IML
ACCESSORIES
 

STATIC MEASUREMENT

Scientific investigation of static problems is difficult and frustrating without a method of measurement. The Fraser range includes the handheld 715 Static Meter which is used throughout the industrial world. Additionally, the EX-715 Static Meter has unique ATEX and IECEx certification and the L40 Liquid Conductivity Meter is essential in combating electrostatic ignition hazards in flammable fuels and solvents.

715
STATIC METER
715
STATIC METER
The 715 Static Meter enables industrial engineers to investigate static electricity problems swiftly and accurately.
EX-715
EX STATIC METER
EX-715
EX STATIC METER
The EX-715 EX Static Meter enables investigation and monitoring of industrial static electricity problems and is certified for use in hazardous areas.
740
SURFACE RESISTANCE METER
740
SURFACE RESISTANCE METER
The 740 Surface Resistance Meter is a pocket-sized instrument providing fast and repeatable measurements of conductive, static dissipative and insulative surfaces.
720
AC STATIC BAR CHECKER
720
AC STATIC BAR CHECKER
The pocket-sized 720 provides a quick and accurate method of checking that AC static eliminator bars are working.
L40
LIQUID CONDUCTIVITY METER
 

EX-HAZARDOUS AREA STATIC CONTROL

The special requirements of dangerous or volatile environments are addressed by our ATEX and IECEx certified static neutralisation and measurement products. From static measurement and passive dischargers to an electrically-powered static elimination system with air knife options, Fraser’s EX range is trusted by industries worldwide.

EX-1250
EX STATIC ELIMINATOR
EX-1250
EX STATIC ELIMINATOR
The EX-1250 is a high performance static eliminator with ATEX certification for use in hazardous areas.
EX-715
EX STATIC METER
EX-715
EX STATIC METER
The EX-715 EX Static Meter enables investigation and monitoring of industrial static electricity problems and is certified for use in hazardous areas.
EX-HPSD 101 / 201
EX STATIC DISCHARGERS
EX-HPSD 101 / 201
EX STATIC DISCHARGERS
EX-HPSD 101 and 201 Static Dischargers are powerful anti-static tools which have been ATEX certified for use in hazardous areas.
5000 / 5100
IONISED AIR KNIVES
5000 / 5100
IONISED AIR KNIVES
The 5000 and 5100 Ionised Air Knives produce fast-moving ionised air which can neutralise static electricity and remove contaminants.
5500
IONISED AIR KNIFE SYSTEM
 

PNEUMATIC CONVEYING

Solutions for the neutralisation of static charge within pipework. Eliminates the static cling of material to itself, to delivery chutes or to the walls of the pipework. This leads to a decrease in blockages, less separation of mixed product, a reduction in spurious ‘hits’ by metal detectors and easier bagging of product. For industry-standard pipe diameters and flanges with custom sizes available.

3024 DC
RING IONISER
3024 DC
RING IONISER
The 3024 DC Ring Ioniser is a compact in-line static eliminator to neutralise charged material in pneumatic transport and polymer handling systems.
6000 IONTUBE
IN-LINE IONISER