PHV
Sensor for Iron & Steel IndustryCMD
High performance design with using LED
This series are ideal for detection steel materials in harsh environments at steel plants and heavy industry.
PRV
Sensor for Iron & Steel IndustryHMD
Fiber optic type HMD.
It operates by detecting infrared rays (heat rays) radiated from the heat material.
It is ideal for detecting steel materials at steel plants and heavy industry in harsh environments. Detectable hot metal temp is 360 to 1,200 degrees C
PH-DX/PH-WX
Sensor for Iron & Steel IndustryCMD
LED type CMD.
It uses a robust die-casting case and is ideal for detecting steel materials at steel plants and heavy industry. A lineup of water-cooled case type is also available.
MBX-301CA
Sensor for Iron & Steel IndustryMicrowave-guide type Detector
Microwave type not affected by vapor, disturbance light or smoke
MBX-211
Sensor for Iron & Steel IndustryClose Crane Warning
Detecting accuracy is high because of geometrical setting system
MBF
Sensor for Iron & Steel IndustryClose Crane Warning
Stable operation under severe environment because of using microwave
LAV
Sensor for Iron & Steel IndustryCMD
High performance design with using semiconductor laser.
This series are ideal for detection steel materials in harsh environments at steel plants and heavy industry.
Sensor Head and Fiber Unit for CMD/HMD
Sensor for Iron & Steel IndustryFiber Unit & Sensor Head for CMD/HMD
Semiconductor laser type detectors and other various products suitable for severe environments
PD-10M/8NM
Photoelectric SwitchOptical Distance Measurement
By phase difference between the benchmark projected optical signal and the received optical signal from the reflector, the distance between 2 points will be calculated.
Featured points:
Analog output in proportion to distance
Two comparator outputs within any distance
FG-31C/51C
Photoelectric SwitchU-Shaped
Case: die casting
Width: 31mm and 51mm
Suitable for various positioning control applications with the sensor’s fast response and high repeatability
FC-51C
Photoelectric SwitchU-Shaped
Width: 50mm
Suitable for various positioning control applications with the sensor’s fast response and high repeatability
FBX-25
Photoelectric SwitchU-Shaped
One-beam and two-beam types available
Width: 25mm, repeatability: +/-0.1mm
Suitable for various positioning control applications with the sensor’s fast response and high repeatability
DMS-G/H-E
Optical Data Transmission DeviceParallel type
Optical Data Transmission Device with high-frequency noise resistance.
This is Parallel I/O with 4-bit and 8-bit type. It communicates wirelessly (infrared ray) between mobile vehicles sides such as AGVs (Automated Guided Vehicles) and the station sides by using this. Compatible with SEMI E84 standard.
DMS-G/H-V
Optical Data Transmission DeviceParallel type
This is Parallel I/O with 4-bit and 8-bit type. It communicates wirelessly (infrared ray) between mobile vehicles sides such as AGVs (Automated Guided Vehicles) and the station sides by using this. Model numbers corresponded to SEMI E84 are lined up.
DMG
Optical Data Transmission DeviceParallel type
This is Parallel I/O with 4-bit and 8-bit type.
It communicates wirelessly (infrared ray) between mobile vehicles sides such as AGVs (Automated Guided Vehicles) and the station sides by using this.
Model numbers corresponded to SEMI E84 are lined up.
This is provided a logging function and it is useful to solve some troubles such as interlocking.
DMJ-G/HB1
Optical Data Transmission DeviceParallel type
This is Parallel I/O (8-bit) with RJ-11 modular cable type.
It communicates wirelessly (infrared ray) between mobile vehicles sides such as AGVs (Automated Guided Vehicles) and the station sides by using this.
This is provided with a logging function and corresponded to SEMI E84.
This composes of Head, Connector and RJ-11 cable, it is user friendly to make wiring.
DMH-GC/HC
Optical Data Transmission DeviceParallel type
More compact and lighter compare with previous models.
With light emission adjuster, the transmission distance can be easily customized.
DMH-GB/HB
Optical Data Transmission DeviceParallel type
The transmission time is 7ms which is 5 times faster than the normal 8-bit DM series.
So it’s possible to transfer and receive more data within limited time.
DMM
Optical Data Transmission DeviceOpen Network (Parallel)
There are compatibilities between:
DMM-GB/HB and DMS-GB/HB-V
DMM-GC/HC (16 bit) and DMH-GC/HC
Therefore they can be used together as the communication partners.
With detachable connectors, maximum 64 units can be connected to a master unit.
BWF-11/21/31/41
Optical Data Transmission DeviceSerial type
Long distance Optical Data Transmission Device with serial interfaces.
Sophisticated functions are available even with the compact size and light weight.
The long distance transmission is enabled by our own data signal processing technologies.
Transmission speed: up to 19.2kbps
Interface: RS-232C/422 and Current loop/RS-232C etc.
BWF-17/27
Optical Data Transmission DeviceOpen Network (Serial)
Maximum 112 points, 16 words can be transmitted.
Maximum 42 units can be connected to a master unit.
BWF-3E/4E-CE
Optical Data Transmission DeviceOpen Network (Serial)
Optical Data Transmission Device / Open Network
CWF-01/02
Optical Data Transmission DeviceSerial type
All necessary features are included within the body size 80x80x40mm.
Applications are for controlling starker cranes of automatic warehouse and other overhead cranes which require certain distance.
CWF-11/12
Optical Data Transmission DeviceSerial type
Transmission distance is 80m that is the longer version of CWF-01/02.
Optical axis can be easily adjusted.
EWF-0/1E-N
Optical Data Transmission DeviceOpen Network (Serial)
100Mbps optical repeater which can directly connet to the Ethernet line.
Setting of MAC address or IP is not required and it can be used as LAN cables.Non-contact transmission is available for up to 100m between moving devices.
*This model integrates the conventional model.
BRS
Optical Data Transmission DeviceOptical Remote Controller
Compare with the traditional model, this new series is much smaller and thinner.
Backlight in the screen makes it easy to see.
Lifetime is improved by suing the sheet switch in the key board.
BRC-G
Optical Data Transmission DeviceOptical Remote Controller
4-point and 12-point type are available
Meet the industrial needs with its high reliability
BNC
Optical Data Transmission DeviceParallel type
You can confirm the operation quality before or after SEMI E84 communication using the device.
With 2 types of application software, you can read the following data in the form of timing chart through a computer:
a) Interlocks simulation before handling materials
b) Optical communication logging data in DMG sensor after handling materials, as a method of solving troubles
ISP-A1C
Optical Data Transmission DeviceSerial/Parallel Converter
Convert serial data to parallel format or the reverse
Transfer a large number of signals with a few wires
Wireless transmission can be sassily done with our Optical Data Transmission Devices.
Transmission speed is faster compare with the previous model.
YVT-35LX-F0/FK
Scanning RangefinderDistance Data Output
3D LRF
3D Scanning Range Finder.
The distance is measured by steering the laser beam vertically and horizontally.
In 1 frame, a point cloud with 2590 points is generated.
It is possible to increase the point cloud density using the interlacing mode.
This scanner is equipped with an acceleration sensor and a PPS input signal.
PBS-03JN
Scanning RangefinderArea Configuration
Infra-red LED light source, distance measurement type obstacle detector.
Fine settings available for each pattern,
greatly improved than normal reflective photo sensors.
Scanning angle: 180°
UTM-30LN
Scanning RangefinderArea Configuration
30m and 270° scanning range.
Working under 100,000lx with IP64 protection structure.
Suitable for security purpose as a monitor in outdoor environment.
25msec scanning time, also possible for sticking-out detection.
UTM-30LX
Scanning RangefinderDistance Data Output
30m and 270° scanning range.
Working under 100,000lx with IP64 protection structure.
Possible for outdoor applications such as service robots.
Suitable for robots with higher moving speed because of 25msec scanning time.
UTM-30LX-EW
Scanning RangefinderDistance Data Output
Ethernet interface type of Top-URG.
Protection structure is improved to IP67,
and it is more suitable for outdoor use even in the environment with 100,000lx.
UAM-05LECA-T301
Scanning RangefinderSafety Laser Scanner
New EtherCAT type added to the UAM series
A safety laser scanner with 5 meter protection zone and 270° scanning angle, allowing flexible area configuration. It also allows easy management of multiple sensors over a single network.
Ideal for managing multiple robots together and sharing AGV speed information across the network.
Certified safety device compliant with international safety standards.
UXM-30LX-EW
Scanning RangefinderDistance Data Output
Stable detection even targeting black objects.
Multi-echo functionality and IP67 available.
UXM-30LN-PW
Scanning RangefinderArea Configuration
Stable detection even targeting black objects.
Multi-echo functionality and IP67 protection,
and make it possible to operate under harsh environment such as rain, snow and fog.
UGM-50LXP/ UGM-50LXN
Scanning RangefinderDistance Data Output
Max. distance 120m for outdoor.
Maximum detection range is 120 meters and 190 degrees.
The metal housing protects internal system up to 50G(single).
Its protective structure is IP67.
UGM-50LAP/ UGM-50LAN
Scanning RangefinderArea Configuration
Max. distance 120m for outdoor.
Area Output Model
Maximum detection range is 120 meters and 190 degrees.
The metal housing protects internal system up to 50G(single).
Its protective structure is IP67.
URM-40LC-EWT
Scanning RangefinderArea Configuration /Distance Data Output
NEW MODEL
New 2D Scanning Range Finder for outdoor
Compact model and the 40m range.
Multi-echo functionality and IP67 protection with it.
UXM-30LXH-EHA
Scanning RangefinderDistance Data Output
Upgraded with finer resolution.
Multi-echo functionality and IP67 protection
for harsh environments such as rain, snow and fog.
UXM-30LAH-EHA
Scanning RangefinderArea Configuration /Distance Data Output
Upgraded with finer resolution.
Multi-echo functionality and IP67 protection
for harsh environments such as rain, snow and fog.
UXM-30LXH-EWA
Scanning RangefinderDistance Data Output
Upgraded with finer resolution.
Multi-echo functionality and IP67 protection
for harsh environments such as rain, snow and fog.
UXM-30LAH-EWA
Scanning RangefinderArea Configuration /Distance Data Output
Upgraded with finer resolution.
Multi-echo functionality and IP67 protection
for harsh environments such as rain, snow and fog.
More flexible field setting is also available.
UST-30LX
Scanning RangefinderDistance Data Output
Outdoor model with Small Size
The smallest and lightest of its kind.
The lightness at only 130g make it easy to install on even smaller robots or Unmanned Aerial Vehicles.
UST-30LC/LCN
Scanning RangefinderArea Configuration /Distance Data Output
Scanning Rangefinder / Area configuration type
UST-15LX
Scanning RangefinderDistance Data Output
Outdoor model with Small Size
The smallest and lightest of its kind.
The lightness at only 130g make it easy to install on even smaller robots or Unmanned Aerial Vehicles.
UST-10/20LX
Scanning RangefinderDistance Data Output
The smallest and lightest of its kind.
The lightness at only 130g make it easy to install on
even smaller robots or Unmanned Aerial Vehicles.
UST-10/20LN
Scanning RangefinderArea Configuration
10m and 20m Scanning Range and Compact!
Upgraded with wider detection range and faster response time.
More flexible field setting is available,
and even more suitable for obstacle detection of AGVs or load shifting detection.
UST-05LA/05LAP
Scanning RangefinderArea Configuration /Distance Data Output
Upgraded with wider detection range and faster response time.
More flexible field setting is available,
and even more suitable for obstacle detection of AGVs or load shifting detection.
UST-05LX
Scanning RangefinderDistance Data Output
New model : Distance output type of the UST-05 series.
Upgraded with wider detection range and faster response time.
UST-05LN / UST-05LNP
Scanning RangefinderArea Configuration
Very compact!
NPN and PNP types are available.
Upgraded with wider detection range and faster response time.
More flexible field setting is available,
and even more suitable for obstacle detection of AGVs or load shifting detection.
KAD-300
Sensor for Iron & Steel IndustryClose Crane Warning
Distance measurement sensor, working with its reflector
By phase difference between the benchmark projected optical signal and the received optical signal from the reflector, the distance between 2 points will be calculated.
Output can be set at any distance of its detectable range. KAD-300 is the longer distance version of KAD-200
UAM-05LP-T301/T301C
Scanning RangefinderSafety Laser Scanner
Safety Sensor
A compact design for installation on AGVs, AGCs as well as in vertical guarding applications.
Conformity Standards
IEC61496-1/3: Type3
IEC61508: SIL2
ISO13849-1: PL d Category3
KAD-200
Sensor for Iron & Steel IndustryClose Crane Warning
Distance measurement sensor, working with its reflector
By phase difference between the benchmark projected optical signal and the received optical signal from the reflector, the distance between 2 points will be calculated.
Output can be set at any distance of its detectable range.
UAM-05LPA-T301/T301C
Scanning RangefinderSafety Laser Scanner
Safety laser scanner with 5m and 270°protection range.
It is compact, highly functional, and easy to use, and can improve the efficiency and operation rate of factories and logistics by providing safety measures for AGVs, robots, machinery, etc.
It can replace protective fences, light curtains and mat switches.
Safety standard certified.
*Improved environmental resistance compared to conventional UAM.
PGL-050W3/180W3
Photoelectric SwitchLaser Distance Measurement
NEW 180m Distance (maximum)
Laser Distance Measurement
Long distance type laser sensor
Two models are available
AreaDesigner for Tablet
Scanning RangefinderArea Configuration
Android/iOS app of AreaDesigner for tablet
Measurement monitoring and confirmation of area settings is possible from Android/iOS tablet device.
UCT-10LCM
Scanning RangefinderArea Configuration
Only 20 mm thick, this ultra-slim 3D LiDAR offers up to 10 m detection with a wide 100° (H) × 6° (V) scan,
It is ideal for forklift pallet hole detection, AGV/AMR step detection, and safety applications such as intrusion and door pinch detection.
UAM Monitor
Scanning RangefinderArea Configuration
UAM Monitor
Smartphone app for the UAM series (Android/iOS).
It enables monitoring of sensor measurement data and checking output status from Android/iOS devices.
Scanning Rangefinder
Photoelectric Switch
Sensor for Iron & Steel Industry
Optical Data Transmission