General Purpose Dispense Tips
Made from burr-free, polished passivated stainless steel, Optimum® general purpose dispense tips are ideal for handling a wide range of assembly fluids.VIEW DETAILSGENERAL PURPOSE DISPENSE TIPS
Optimum Syringe Barrels
Optimum® syringe barrels feature ZeroDraft™ walls with consistent internal diameters that maintain a perfect seal with pistons to ensure accurate, consistent filling and dispensing with virtually no fluid waste.VIEW DETAILSOPTIMUM SYRINGE BARRELS
Ultimus I-II Dispensers
High-precision benchtop fluid dispensing control for advanced applications of glues, oils, greases, epoxy, silicones, sealants, cyanoacrylates, solder pastes, and other assembly fluids dispensed with syringe barrels.VIEW DETAILSULTIMUS I-II DISPENSERS
ProBlue® Flex Melter with BBconn Controls
The ProBlue Flex melter from Nordson is advanced technology that adapts to any operation with ease and simplicity. Depending on your unique circumstances, you can choose from factory options direct from Nordson, or smart and simple field upgrades, supported by Nordson’s seasoned technical support representatives.VIEW DETAILSPROBLUE® FLEX MELTER WITH BBCONN CONTROLS
Performus Series Dispensers
Nordson EFD Performus™ Series fluid dispensers provide reliable benchtop dispensing control for general application of glues, oils, greases, epoxy, silicones, sealants, cyanoacrylates, solder pastes, and other assembly fluids dispensed with syringe barrels.VIEW DETAILSPERFORMUS SERIES DISPENSERS
WaferSense® Auto Multi Sensor™ (AMS)
Speed vibration, leveling and humidity measurements with an all-in-one measurement device. Improve yields.

Semiconductor fabs and OEMs worldwide value the accuracy, precision and versatility of the WaferSense AMS. The most efficient and effective wireless measurement device for leveling, vibration and humidity.
VIEW DETAILSWAFERSENSE® AUTO MULTI SENSOR™ (AMS)
BKG® Combi-Line™ Tempered Water System
The BKG® Combi-Line™ is our tempered water system with advanced features for demanding materials. Increase your flexibility and benefit from various filtration and drying options to suit your process perfectly.VIEW DETAILSBKG® COMBI-LINE™ TEMPERED WATER SYSTEM
Blue Series™ II Hoses with RediFlex™ II Mounts
Increase productivity with the improved Blue Series II hot melt adhesive hoses. Advanced thermal management enables reduced energy consumption, shorter warm-up times, and precise adhesive application.VIEW DETAILSBLUE SERIES™ II HOSES WITH REDIFLEX™ II MOUNTS
Optimum PTFE-coated Tips
Optimum® PTFE-coated dispense tips control wicking to stop dripping. By providing fast, clean cutoff they increase productivity and reduce material waste.VIEW DETAILS
797PCP-2K Progressive Cavity Pumps
Continuous volumetric meter mix dispensing for two-component (2K) fluids provides industry-leading process control for manufacturers.VIEW DETAILS797PCP-2K PROGRESSIVE CAVITY PUMPS
PPS Technology Centers and Lab Services
We offer our polymer processing and fluid coating customers extensive laboratory, technology, and training center capabilities. VIEW DETAILSPPS TECHNOLOGY CENTERS AND LAB SERVICES
QX600™ & QX250i™
The SIM (Strobed Inspection Module) is at the core of every CyberOptics’ 2D AOI system. Designed and manufactured exclusively by CyberOptics, the SIM delivers high performance inspection at 110cm²/sec – And, it is absolutely calibration-free.

AI² (Autonomous Image Interpretation) technology in the QX250i ensures ultrafast programming and is capable of getting you from zero to production ready in less than 13 minutes*. Powered by an 80-megapixel sensor, QX250i™ significantly improves solder joint and 01005 inspection performance.
VIEW DETAILSQX600™ & QX250I™
SE3000™/ SE3000-X™ 3D SPI
Maximize yields with the World’s First SPI system incorporating the MRS® Sensor technology. When only the very best will do.VIEW DETAILSSE3000™/ SE3000-X™ 3D SPI
EDI® Aftermarket Services
Whether you need new parts, on-site technical service, or it's time to refurbish your equipment, the EDI® Aftermarket Services team has the skills and know-how to help you get the job done.VIEW DETAILSEDI® AFTERMARKET SERVICES
Optimum Flexible Tips
Optimum® flexible dispensing tips provide accurate, repeatable deposits in areas that are normally too difficult to reach.VIEW DETAILSOPTIMUM FLEXIBLE TIPS
EDI® Lip Adjustment Systems
Nordson offers a variety of lip adjustment systems, from manual systems that enable direct coarse tuning for each set-up, to automatic systems that deliver fine adjustments in reduced time. VIEW DETAILSEDI® LIP ADJUSTMENT SYSTEMS
Optimum Chamfered Tips
Perfect for micro-deposit applications of low-viscosity fluids, Optimum® chamfered tips are designed with a special outer diameter taper that prevents wicking for greater deposit accuracy.VIEW DETAILSOPTIMUM CHAMFERED TIPS
BKG® Aftermarket Services
Whether you need parts, on-site technical service, or it's time to refurbish your melt delivery or pelletizing equipment, the BKG® Aftermarket Services team has the skills and know-how to help you get the job done.VIEW DETAILS
Harmony® Modules
The Harmony dispensing modules support applications ranging from continuous spray or slot coating to demanding ultra-high-speed intermittent applications.VIEW DETAILSHARMONY® MODULES
AP Batch Series
The AP Batch Series offers high-performance plasma treatment for batch manufacturing and R&D environments.VIEW DETAILSAP BATCH SERIES
DIN-NX Volumetric Pump Controllers
Control 797PCP and 797PCP-2K Series progressive cavity pumps using Ethernet compatibility with NX protocol via TCP/IP for Smart Factory integration.VIEW DETAILSDIN-NX VOLUMETRIC PUMP CONTROLLERS
Assure Component Counter
The correct material in the correct quantity at the right time in the right place.
Ensure your production is smooth running and cost efficient with Assure™, the world first X-ray component counter.
VIEW DETAILSASSURE COMPONENT COUNTER
SELECT Synchro
The SELECT Synchro system uses patent-pending synchronous motion technology to reduce conveyance time dramatically and boost throughput by 20-40% for most applications. Single-sided, double-sided through-hole, mixed-technology surface mount, and through-hole assemblies travel non-stop through the system for outstanding productivity.VIEW DETAILSSELECT SYNCHRO
781S General Purpose Spray Valves
The 781S Series general purpose spray valve provides exceptional control for reliable, consistent coatings of low- to medium-viscosity fluids using Low Volume Low Pressure (LVLP) technology.VIEW DETAILS781S GENERAL PURPOSE SPRAY VALVES
2K Dispense Guns
Nordson EFD offers a wide range of reliable 2K dispensers. Lightweight and durable, these tools make applying two-component adhesives quick and easy. VIEW DETAILS2K DISPENSE GUNS
Portable Fluid Dispensers
Nordson EFD’s line of portable fluid dispensers is easy to use and offer durable, fail-safe construction with less hand fatigue.VIEW DETAILSPORTABLE FLUID DISPENSERS
4-Axis PROPlus Series Automated Fluid Dispensing Robot
The vision-guided 4-axis PROPlus Series dispensing system features a rotating table for less wear and tear and unmatched R-axis repeatability of 0.005°.VIEW DETAILS
ProcessMate Temperature Controllers
Prevent material degradation and eliminate deposit size variation with ProcessMate™ Temperature Control Units from Nordson EFD.VIEW DETAILSPROCESSMATE TEMPERATURE CONTROLLERS
3-Axis PROX / PROPlus / PRO Series Automated Fluid Dispensing Robot
The vision-guided PROX / PROPlus / PRO Series is Nordson EFD's most advanced automated dispensing system, designed and configured for precision and simplified usability.VIEW DETAILS3-AXIS PROX / PROPLUS / PRO SERIES AUTOMATED FLUID DISPENSING ROBOT
ProcessMate 5000 Universal Centrifuge
Quickly and efficiently remove entrapped air from fluid packaged in syringes with the benchtop ProcessMate™ 5000 Universal Centrifuge.VIEW DETAILSPROCESSMATE 5000 UNIVERSAL CENTRIFUGE
Plastic Nozzles
Polyethylene nozzles securely thread into all Optimum® cartridge sizes, 725 Series piston valves, and 736HPA-NV high pressure valves.VIEW DETAILSPLASTIC NOZZLES
Optimum PTFE-lined Tips
Our clog-free, PTFE-lined dispense tips are ideal for dispensing low-viscosity cyanoacrylates and other assembly fluids.VIEW DETAILSOPTIMUM PTFE-LINED TIPS
Optimum Angled Tips
Optimum® angled stainless steel tips with SafetyLok™ hubs are available in 45° and 90° bends. They deliver accurate, repeatable fluid dispensing in challenging applications.VIEW DETAILSOPTIMUM ANGLED TIPS
Radial Spinner Valve System
Nordson EFD radial spinner valve system provides an efficient, cost-effective way to apply production fluids inside cylindrical parts between 10.2 mm (0.4”) and 127 mm (5”) in diameter.VIEW DETAILSRADIAL SPINNER VALVE SYSTEM
ProcessMate 100 Vacuum Pickup System
The ProcessMate™ 100 Vacuum Pickup System provides a simple, efficient way to lift and position small or delicate components in benchtop assembly processes to maximize efficiency.VIEW DETAILSPROCESSMATE 100 VACUUM PICKUP SYSTEM
4-Axis R Series Automated Fluid Dispensing Robot
The R Series automated fluid dispensing system features specialized TeachMotion™ Teach Pendant software for market-leading repeatability and accuracy in fluid placement and positioning.VIEW DETAILS


PICO Nexμs Jetting System
The PICO® Nexμs™ is a small, 24V, DIN-rail mounted jetting controller providing behind-the-scenes control of your PICO Pμlse® XP valves using Industrial Ethernet protocols to improve programming convenience and efficiency.VIEW DETAILSPICO NEXΜS JETTING SYSTEM
PICO XP Jetting System
The PICO XP jetting system takes the guesswork out of how to achieve the same extremely precise (XP), repeatable non-contact micro-dispensing from valve-to-valve, after maintenance, and as temperatures rise or fall.VIEW DETAILSPICO XP JETTING SYSTEM
PICO Toµch Controllers
The PICO® Toµch ™ controller’s intuitive touchscreen interface greatly simplifies setup and operation of the PICO Pµlse ® jet valve while allowing precise adjustment of dispensing parameters.VIEW DETAILSPICO TOΜCH CONTROLLERS
Liquidyn P-Dot Series Jetting Valves
Designed for medium-viscosity to highly viscous or thick fluids, the pneumatically actuated Liquidyn® P-Dot jet valve provides very precise, repeatable jetting in the form of dots, beads, and lines.VIEW DETAILSLIQUIDYN P-DOT SERIES JETTING VALVES
Liquidyn P-Jet Series Jetting Valves
Dispense low- to medium-viscosity fluids in extremely accurate, repeatable beads and lines with the high-performance Liquidyn® P-Jet jetting valve. Micro-deposits as small as 3 nL can be applied at up to 280Hz.VIEW DETAILSLIQUIDYN P-JET SERIES JETTING VALVES
AOI FX-940UV
The FX-940UV makes inspection of conformal coatings simple and convenient by automating the inspection process for quality, consistency and thickness of coatings under UV lighting with the use of proprietary inspection algorithms.


VIEW DETAILSAOI FX-940UV
Automatic Powder Coating Booths
Nordson automatic powder coating booths enable our customers to achieve more productivity and powder and energy savings. VIEW DETAILSAUTOMATIC POWDER COATING BOOTHS
Optimum Syringe Barrel Pistons
Optimum® SmoothFlow™ pistons feature unique channels that prevent air entrapment while providing a smooth profile radius to reduce fluid shear.VIEW DETAILSOPTIMUM SYRINGE BARREL PISTONS
Thermal Interface Materials (TIM)
Non-silicone thermal compounds are widely used in electronic and electromechanical applications because they offer resistance to thermal cycling degradation. Our thermal compounds are formulated to provide excellent heat transfer, long shelf life stability, and are RoHS and REACH compliant (lead-free).VIEW DETAILS
Optimum Cartridge Retainer Systems
Molded from high-tensile, clear plastic, Optimum® cartridge retainers make it easy to visually monitor fluid levels during dispensing – an industry first.VIEW DETAILSOPTIMUM CARTRIDGE RETAINER SYSTEMS
Optimum Cartridge End Caps & Outlet Caps
Optimum® cartridge end caps provide an airtight seal at the top of cartridges. Threaded, self-venting outlet caps prevent leaks and keep air from being introduced into the fluid.VIEW DETAILSOPTIMUM CARTRIDGE END CAPS & OUTLET CAPS
OptiSure Automated Optical Inspection (AOI)
Provides optical assurance of fluid deposit dimensions and deposit placement to determine if dispense requirements have been met.VIEW DETAILSOPTISURE AUTOMATED OPTICAL INSPECTION (AOI)
Side x Side Two-Component Cartridges
Nordson EFD offers a comprehensive selection of high-quality, competitively-priced Side x Side cartridges for packaging and dispensing two-component materials used in automotive, construction, and industrial applications.VIEW DETAILSSIDE X SIDE TWO-COMPONENT CARTRIDGES
4-Axis RV Series Automated Fluid Dispensing Robot
The RV Series automated fluid dispensing system features proprietary DispenseMotion™ software and a fully integrated CCD smart vision camera for best-in-class fluid placement accuracy and control at any angle along the 360° rotational plane.VIEW DETAILS4-AXIS RV SERIES AUTOMATED FLUID DISPENSING ROBOT
Optimum Syringe Barrel Adapters
Adapters assemblies connect the Nordson EFD Optimum® syringe barrels to the air output of the fluid dispenser unit.VIEW DETAILSOPTIMUM SYRINGE BARREL ADAPTERS
Optimum Syringe Barrel End Caps & Tip Caps
Optimum® end caps and tip caps provide an airtight seal that allow you to pre-fill syringe barrels to save time or seal partially-used syringes between shifts to reduce waste.VIEW DETAILSOPTIMUM SYRINGE BARREL END CAPS & TIP CAPS
Optimum Brush Tips
Ideal for spreading glues and greases, our high-quality nylon 6/12 brush dispense tips come with either soft or stiff bristles to meet your application needs.VIEW DETAILSOPTIMUM BRUSH TIPS
Optimum Cartridge Pistons
Optimum® cartridge pistons are precision molded from high-density polyethylene to fit perfectly within Nordson EFD cartridges, preventing blow-by and leakage during filling and storage.VIEW DETAILS


Syringe Barrel Filling Systems
Atlas™ syringe barrel filling systems provide fast, accurate filling of non-pourable assembly fluids, in addition to being easy to setup, cleanup, and use.VIEW DETAILSSYRINGE BARREL FILLING SYSTEMS
Optimum Precision Nozzles
Optimum® SmoothFlow™ stainless steel precision nozzles feature a tapered nozzle design ideal for micro-deposit dispensing in the compact camera module (CCM), LED, semiconductor, automotive electronics, and high-precision industrial markets.VIEW DETAILSOPTIMUM PRECISION NOZZLES
PICO Pµlse Jetting Valves
Nordson EFD’s PICO Pµlse ® exchangeable, modular jet valve technology dispenses with industry-leading accuracy and speed to apply very precise, repeatable micro-deposits at 1000Hz continuous and bursts up to 1500Hz*.VIEW DETAILSPICO PΜLSE JETTING VALVES
Optimum ECO Dispensing Components
Nordson EFD Optimum® ECO industrial syringe barrels and dispensing components feature sustainably-sourced polyethylene to help reduce the carbon footprint.VIEW DETAILSOPTIMUM ECO DISPENSING COMPONENTS
PICO Pµlse Contact Dispense Valves
Apply precise microdots and control surge when dispensing lines and stripes with the PICO Pµlse ® contact dispense valve.VIEW DETAILSPICO PΜLSE CONTACT DISPENSE VALVES
Optimum Oval Tips
Apply flat ribbons of thick assembly fluids, such as pastes, sealants, and epoxies, accurately and consistently with Optimum® oval dispensing tips.VIEW DETAILSOPTIMUM OVAL TIPS
MC781 Pulsed Lubrication Systems
Apply a fine, uniform coating of lubricants, corrosion inhibitors, and release agents from any angle with the MicroCoat® MC781 Pulsed Lubrication System from Nordson EFD.VIEW DETAILSMC781 PULSED LUBRICATION SYSTEMS
Disposable Square OptiMixers
Optimizing mix performance in a 20% shorter length than comparable square mixers, the OptiMixer™ allows users to get even closer to applications.VIEW DETAILSDISPOSABLE SQUARE OPTIMIXERS
MicroMark Spray Marking Valve Systems
Nordson EFD’s unique MicroMark® spray marking systems eliminate clogging, maintenance, and downtime by using a programmable air delay after each cycle to clean the spray nozzle.VIEW DETAILS
Metal Nozzles
Our metal nozzles are 100% stainless steel free of flash and burrs. With a 1/4 NPT (6.35 mm) thread, they fit Nordson EFD 725 Series and 736HPA-NV valves.VIEW DETAILSMETAL NOZZLES
Optimum Cartridges
Optimum® cartridges are molded from a proprietary formulation of Polypropylene and provide exceptional clarity, chemical compatibility, impact strength, and dimensional stability.VIEW DETAILSOPTIMUM CARTRIDGES
MicroCoat Six Gallon Reservoir System
Provide a consistent fluid feed to the MicroCoat® MC600 lubrication system with Nordson EFD reservoirs.VIEW DETAILSMICROCOAT SIX GALLON RESERVOIR SYSTEM
MC800 Continuous Lubrication Systems
Designed for continuous lubrication, Nordson EFD’s MicroCoat® MC800 Series system eliminates oil waste. Configure up to eight valves independently. VIEW DETAILSMC800 CONTINUOUS LUBRICATION SYSTEMS
MicroDot Dispense Tips
Improve the quality and repeatability of your micro-dispensing applications with Optimum® MicroDot dispense tips.VIEW DETAILSMICRODOT DISPENSE TIPS
Lubrication System Accessories
Control the pressure used to operate a MicroCoat® system or provide a consistent fluid feed to the MC800 lubrication system with these accessories from Nordson EFD.VIEW DETAILSLUBRICATION SYSTEM ACCESSORIES
Tip Shields
Reusable tip shields for light-sensitive and UV-cure adhesives. Tip shields fit over the dispensing tip hub.VIEW DETAILSTIP SHIELDS
Laser Light Barrier
Detect each fluid deposit dispensed by your Nordson EFD Liquidyn® jetting valve with our innovative, cost-effective Laser Light Barrier.VIEW DETAILSLASER LIGHT BARRIER
3-Axis GVPlus / GV Series Automated Fluid Dispensing Robot
The vision-guided GVPlus and GV Series gantry robots work as standalone systems or as part of fully automated solutions. The GVPlus supports heavier arm tooling and improved positional repeatability at ± 0.008 mm vs. ± 0.02 for the GV Series. Working envelopes range from 400 mm to 800 mm for precise fluid dispensing onto substrates requiring large work envelopes without sacrificing repeatability.VIEW DETAILS
HSS Spray Systems
Nordson EFD offers two-component (2K) high solid spraying solutions for pipe coating, manhole restoration, and other industrial applications with our HSS Spray System.VIEW DETAILSHSS SPRAY SYSTEMS
Cleaning Stations
For automated nozzle cleaning of jet valves and needle valves.VIEW DETAILSCLEANING STATIONS
In-line Plastic Mixers
Ideal for one-use fluid dispensing, Nordson EFD’s disposable static mixers eliminate the need to worry about premature curing of materials.VIEW DETAILSIN-LINE PLASTIC MIXERS
In-line Metal Mixers
Nordson EFD in-line metal mixers’ housings and elements are made primarily of stainless steel. This makes them ideal for high-pressure applications and easy to clean and reuse.VIEW DETAILSIN-LINE METAL MIXERS
SmoothFlow Tapered Dispense Tips
Ideal for use with medium-to-high viscosity fluids, Optimum® SmoothFlow™ tapered dispensing tips apply thick or particle-filled fluids with ease and accuracy.VIEW DETAILSSMOOTHFLOW TAPERED DISPENSE TIPS
HPx High-Pressure Dispensing Tool
Easily apply precise amounts of thick assembly fluids like epoxies and medical-grade adhesives through dispense tips as small as 0.004” with Nordson EFD HPx™ dispensing tools.VIEW DETAILSHPX HIGH-PRESSURE DISPENSING TOOL
BackPack Valve Actuator
Achieve valve actuation speeds as fast as 5 to 6 milliseconds by adding the BackPack™ valve actuator to your Nordson EFD precision dispense valve. Reduce the possibility of shot size variation due to fluctuating plant air supply or different line lengths.VIEW DETAILSBACKPACK VALVE ACTUATOR
UltimusPlus I-II Dispensers
Nordson EFD UltimusPlus™ fluid dispensers provide high-precision benchtop fluid dispensing control for advanced applications. These network capable dispensers use Ethernet compatibility with NX protocol via TCP/IP for Smart Factory integration.VIEW DETAILSULTIMUSPLUS I-II DISPENSERS
Ultimus V High Precision Dispensers
Ultimus™ V provides high-precision benchtop fluid dispensing control for advanced applications of fluids that change viscosity.VIEW DETAILS
FluxPlus Paste Flux
Formulated to work with any alloy and heating process, Nordson EFD’s FluxPlus™ is perfect for BGA rework, mobile device repair, reflowing solder paste, and more.VIEW DETAILSFLUXPLUS PASTE FLUX
Equalizer 2K Dispensing Tool
Dispense more accurate, repeatable amounts of two-component materials in 1:1, 2:1, and 4:1 ratios with the Nordson EFD Equalizer™ 2K Dispensing Tool.VIEW DETAILSEQUALIZER 2K DISPENSING TOOL
Atlas 2K Piston Inserter
The Nordson EFD Atlas™ 2K Piston Inserter is a fast, convenient, and cost-effective way to install our revolutionary AF Air Free pistons in 50mL, 200mL, and 300mL Side x Side cartridges.VIEW DETAILSATLAS 2K PISTON INSERTER
Analog Gauge Fluid Reservoirs
Nordson EFD analog gauge tank reservoirs not only maintain steady fluid pressure, but also prevent fluid contamination and evaporation, and contain fumes.VIEW DETAILSANALOG GAUGE FLUID RESERVOIRS
Disposable Spiral Mixers
Using simple, time-proven geometry, Nordson EFD’s patented disposable Spiral Mixers™ deliver complete and thorough mixing for a wide variety of two-part materials.VIEW DETAILSDISPOSABLE SPIRAL MIXERS
BaitGun and Syringe Systems
Nordson EFD BaitGun and bait syringe applicators and plungers provide a complete system for applying pastes and gel baits for roach and ant pest control.VIEW DETAILSBAITGUN AND SYRINGE SYSTEMS
3-Axis EV Series Automated Fluid Dispensing Robot
The EV Series automated fluid dispensing system is a tabletop robot that delivers easy automation for precise fluid applications with proprietary dispensing software and a simple vision pencil camera.VIEW DETAILS3-AXIS EV SERIES AUTOMATED FLUID DISPENSING ROBOT
Fluid Pressure Booster
Nordson EFD Fluid Pressure Booster is designed to help move thick materials from a tank or cartridge to an EFD precision valve by boosting dispense pressure up to 100 bar.VIEW DETAILSFLUID PRESSURE BOOSTER
Dispense Robot Accessories
Nordson EFD automated dispensing system accessories increase capabilities, and simplify integration into existing manufacturing lines.VIEW DETAILS


Bait Dispense Tips
Nordson EFD bait dispense tips provide pest control professionals with the ability to accurately apply paste and gel baits for roach and ant pest control applications.VIEW DETAILSBAIT DISPENSE TIPS
Dial-A-Dose Industrial Syringes
Nordson EFD offers a comprehensive selection of disposable syringes used for packaging sealants and adhesives for dispensing applications in the electronics rework, industrial, dental, and do-it-yourself markets.VIEW DETAILSDIAL-A-DOSE INDUSTRIAL SYRINGES
3-Axis E Series Automated Fluid Dispensing Robot
The E Series automated fluid dispensing system is a desktop robot that features a simple-to-use Teach Pendant for quick setup and easy programming.VIEW DETAILS3-AXIS E SERIES AUTOMATED FLUID DISPENSING ROBOT
Disposable Square Turbo Mixers
Shorter than comparable spiral mixers, Nordson EFD’s square Turbo™ Mixers allow users to get closer to their application while reducing adhesive waste.VIEW DETAILSDISPOSABLE SQUARE TURBO MIXERS
Animal Health Disposable Dosing Syringes
Nordson EFD offers best-in-class Dial-A-Dose® and Posi-Dose® one-component (1K) disposable dosing syringes used for primary packaging and drug delivery of creams, gels, and pastes in the animal health industry.VIEW DETAILSANIMAL HEALTH DISPOSABLE DOSING SYRINGES
Unity HiTemp Syringe Barrels
Unity™ HiTemp™ syringe barrels feature proprietary materials that maintain integrity for hot melt adhesive dispensing at high temperatures for up to eight hours.VIEW DETAILSUNITY HITEMP SYRINGE BARRELS
Digital Gauge Fluid Reservoirs
Our Precision Regulator/Digital Gauge tank reservoirs offer exceptional full-to-empty fluid pressure control. They feature a precision regulator that holds output pressure consistently, regardless of input pressure fluctuations.VIEW DETAILSDIGITAL GAUGE FLUID RESERVOIRS
ValveMate Spray Valve Controllers
Nordson EFD ValveMate™ spray valve controllers allow the use of Low Volume Low Pressure air to the nozzle to achieve exceptional spray pattern definition.VIEW DETAILSVALVEMATE SPRAY VALVE CONTROLLERS
Do-It-Yourself (DIY) Dual Syringes
Nordson EFD offers disposable dual syringes and static mixers that provide controlled mixing and placement of two-part epoxies, adhesives, sealants, gels, pastes, and compounds used in a range of DIY home improvement, automotive, health and beauty, and dental applications.VIEW DETAILS


787MS MicroSpray Valves
The 787MS-SS MicroSpray™ valve’s innovative design incorporates a small gauge disposable dispensing tip to apply a precise, uniform spray pattern more than 30% smaller than standard spray valves.VIEW DETAILS787MS MICROSPRAY VALVES
752V Diaphragm Valves
The 752V Series diaphragm valve delivers fine flow control when dispensing solvents, cyanoacrylates, anaerobics, fluxes, UV-cure adhesives, and other low- to medium-viscosity fluids.VIEW DETAILS752V DIAPHRAGM VALVES
794 / 794-TC Auger Valves
The 794 Series auger valve makes precise, repeatable deposits without damage to the metal alloy particles in fluids such as solder paste and silver epoxies. For highly abrasive fluids such as thermal interface materials (TIM), use the 794-TC Auger Series with tungsten carbide wetted parts.VIEW DETAILS794 / 794-TC AUGER VALVES
782RA Radial Spray Valves
The 782RA Series radial spray valve’s unique design allows it to apply a precise, uniform 360° coating of lubricants, primers, and other low- to medium-viscosity fluids inside cylinders.VIEW DETAILS782RA RADIAL SPRAY VALVES
754V Aseptic Valves
Nordson EFD's 754V aseptic dispense valve features a smooth fluid flow path that is free of any entrapment areas. FDA-compliant wetted parts make the valve suitable for CIP (Clean-In-Place) and SIP (Sterilize-In-Place) medical assembly processes.VIEW DETAILS754V ASEPTIC VALVES
797PCP Progressive Cavity Pumps
Continuous volumetric dispensing independent of fluid viscosity or changes in viscosity over time gives you reliable, repeatable process control.VIEW DETAILS797PCP PROGRESSIVE CAVITY PUMPS
Liquidyn V200 Valve Controllers
The multi-functional Liquidyn® V200 controller provides safe, easy operation of the Liquidyn P-Jet and Liquidyn P-Dot series jet valves and greater control over dispensing outcomes.VIEW DETAILSLIQUIDYN V200 VALVE CONTROLLERS
781Mini Spray Valves
The 781Mini™ spray valve’s innovative design directs nozzle air pressure more consistently for exceptionally more uniform, narrower spray patterns than previously possible.VIEW DETAILS781MINI SPRAY VALVES
u-TAH Universal Cartridge
The breakthrough, two-component u-TAH® Universal Cartridge looks identical to standard caulking cartridges, yet delivers the most effective, highest quality dispensing of two-part fluids in the industry.VIEW DETAILS


752HF High Flow Diaphragm Valves
The 752HF Series high flow diaphragm valve provides precise, drip-free dispensing of UV-cure resins and similar fluids used in the media manufacturing of DVDs, Blu-Ray DVDs, and CDs.VIEW DETAILS752HF HIGH FLOW DIAPHRAGM VALVES
ValveMate Radial System Controllers
Nordson EFD’s ValveMate™ 7160RA radial system controllers provide built-in regulators to ensure high nozzle air efficiency without overspray.VIEW DETAILSVALVEMATE RADIAL SYSTEM CONTROLLERS
ValveMate Auger Valve Controllers
Nordson EFD ValveMate™ 7194 Series controllers provide precise time, fluid pressure, and speed control when used with our 794/794-TC Series auger dispense valves.VIEW DETAILSVALVEMATE AUGER VALVE CONTROLLERS
ValveMate Dispense Valve Controllers
Nordson EFD's ValveMate™ dispense valve controllers put push-button adjustment of valve open time where it needs to be — at the valve. Maximize automated assembly machine efficiency and convenience.VIEW DETAILSVALVEMATE DISPENSE VALVE CONTROLLERS
725D Piston Valves
The 725D Series piston valve delivers consistent, precise deposits of viscous fluids. Its unique diaphragm isolates wetted components from the actuator, providing superior wear resistance.VIEW DETAILS725D PISTON VALVES
741V Needle Valves
The 741V Series needle valve design applies low viscosity assembly fluids with accurate, extremely close repeat deposit control.VIEW DETAILS741V NEEDLE VALVES
xQR41 MicroDot Valves
The xQR41 Series MicroDot™ needle valve features QR (Quick Release) technology, a 60% smaller form factor, and modular design for new levels of customization in precision fluid dispensing.VIEW DETAILSXQR41 MICRODOT VALVES
xQR41V Needle Valves
Designed for precise, consistent fluid control, the xQR41V Series needle valve features a (QR) Quick Release clasp, modular design, and 60% smaller form factor.VIEW DETAILSXQR41V NEEDLE VALVES
741MD MicroDot Valves
The 741MD Series MicroDot™ needle valve dispenses very precise micro-deposits down to fractions of a microliter. Pneumatically operated and adjustable, it delivers superior fluid dispensing control.VIEW DETAILS


400 Series Autovalve
The Series 400 is a reliable and durable pneumatic meter mix autovalve built with PTFE seals that reduce maintenance in the shut-off area.VIEW DETAILS400 SERIES AUTOVALVE
2K Pistons
Nordson EFD offers three types of pistons for use with our cartridge systems – AF (Air Free) Pistons, Multi-seal with Integral Center Bleed Plug Pistons, and Solid Multi-Seal Pistons.VIEW DETAILS2K PISTONS
2K Mixer Accessories
Nordson EFD offers 2K mixer accessories for a variety of industrial mixing applications.VIEW DETAILS2K MIXER ACCESSORIES
725HF High Flow Piston Valves
The 725HF Series high flow piston valve fills small bottles, foil packs, and other packaging with absolute accuracy at up to 450 ml per second.VIEW DETAILS725HF HIGH FLOW PISTON VALVES
380mL Coaxial Cartridges
The 380mL coaxial cartridge's unique design features a center tube surrounded by an outer “doughnut” tube for consistent 10:1 ratio two-component dispensing.VIEW DETAILS380ML COAXIAL CARTRIDGES
ValveMate 2K Volumetric Pump Controllers
High-resolution touchscreen programming of 797PCP-2K Series progressive cavity pumps provides intuitive adjustment of meter mix dispensing parameters.VIEW DETAILSVALVEMATE 2K VOLUMETRIC PUMP CONTROLLERS
702 Mini-Diaphragm Valves
The 702 Series mini-diaphragm valve provides drip-free coating and consistent shot-to-shot bonding in optical media and other applications requiring smaller and lighter weight dispense valves.VIEW DETAILS702 MINI-DIAPHRAGM VALVES
736HPA-NV High Pressure Valves
Nordson EFD's 736HPA-NV Series high pressure valve applies uniform amounts of thick materials like greases and silicones at pressures up to 2500 psi (172 bar).VIEW DETAILS736HPA-NV HIGH PRESSURE VALVES
450 Series Autovalve
The Series 450 meter mix autovalve features shut-off pistons, which provide precise control of dot or shot volume. Adjust its seals without disassembly of the valve body for added convenienceVIEW DETAILS


2K 50mL Manual Cartridge Dispensers
For trouble-free point-of-use dispensing, select Nordson EFD’s 50mL manual 2K cartridge dispensers.VIEW DETAILS2K 50ML MANUAL CARTRIDGE DISPENSERS
ValveMate Volumetric Pump Controllers
Intuitive touchscreen control of 797PCP Series progressive cavity pumps for precise adjustments of volumetric dispensing parameters at your fingertips.VIEW DETAILSVALVEMATE VOLUMETRIC PUMP CONTROLLERS
Encore® nLighten LED Kit
Encore nLighten LED Kit is a fast, convenient and safety-approved accessory that instantly adds the power of an LED light to the already impressive capabilities of the Encore manual gun range.                     VIEW DETAILSENCORE® NLIGHTEN LED KIT
Nordson Oscillator Gun Mover - Automated Powder Coating
Nordson Oscillator gun movers combine high load capacity, durability and energy efficiency for consistent stroke patterns in a wide range of automated powder coating applications.
*Note: to reflect different regulatory requirements this product is not available in Europe
VIEW DETAILSNORDSON OSCILLATOR GUN MOVER - AUTOMATED POWDER COATING
Nordson Reciprocator Gun Mover - Automated Powder Coating
Nordson Reciprocator gun movers combine high load capacity and durability for consistent stroke patterns in powder coating applications.VIEW DETAILSNORDSON RECIPROCATOR GUN MOVER - AUTOMATED POWDER COATING
Nordson Excel 3000 - Powder Coating Booth
The Excel 3000® Powder Spray Booth provides efficiency, ease-of-use and fast color change in one great system. Compact, Modular and Durable Design.
*Note: This product is available only in North America
VIEW DETAILSNORDSON EXCEL 3000 - POWDER COATING BOOTH
ColorMax2 - Powder Coating Booth
The ColorMax® 2 quick color change powder spray system is optimized for efficient, repeatable powder application. Numerous features minimize powder in process and aid in system cleaning – providing you with fast, contamination-free color change.
*Note: to reflect different regulatory requirements this product is not available in Europe - please refer to the ColorMax3 Powder Coating Booth for Europe
VIEW DETAILSCOLORMAX2 - POWDER COATING BOOTH
2K Dispensing Systems - Micro-Meters
Precisely repeatable two-component metering to meet tight-tolerance manufacturing requirements – simple to configure and easy to maintainVIEW DETAILS2K DISPENSING SYSTEMS - MICRO-METERS
2K Dispensing Systems - Pro-Meter 2K 
The positive rod displacement metering of the Pro-Meter 2K proportions materials to the exact volumetric ratio time and time again; even with notoriously difficult materials like abrasives that can cause machine wear.VIEW DETAILS


Software SMT & Semi
The newly designed V5 series software delivers world-class user experience with its intuitive interface, completely changing the way users interact with our system. Yet, at the same time, the software is extremely stable and simple to use enabling shortest learning curve.
VIEW DETAILSSOFTWARE SMT & SEMI
High Precision Accuracy with Proprietary Multi-Reflection Suppression® (MRS®) Sensor Technology
Proprietary MRS® sensor technology, deemed best-in-class, enables metrology-grade accuracy by inhibiting optical measurement distortions and reflections. At the heart of the world’s cell phone manufacturing inspection systems and used in various applications where highly accurate inspection is critical.Nordson DAGE’s new micro materials tester – Prospector™ is designed for the most advanced failure analysis investigations. It brings 5 new test perspectives into the one instrument to ensure you can Find Every Failure™.

VIEW DETAILSHIGH PRECISION ACCURACY WITH PROPRIETARY MULTI-REFLECTION SUPPRESSION® (MRS®) SENSOR TECHNOLOGY
4000 Plus Bondtester
4000Plus bondtester sets the industry standard in bondtesting offering unsurpassed accuracy and repeatability of data, providing complete confidence in results.VIEW DETAILS4000 PLUS BONDTESTER
ASYMTEK Calibrated Process Jetting CPJ
Calibrated Process Jetting (CPJ) is an innovative, patented, closed-loop technology that produces consistent dispense amounts for high yield.VIEW DETAILSASYMTEK CALIBRATED PROCESS JETTING CPJ
SQ3000™+ Multi-Function for 3D AOI, SPI & CMM
SQ3000+ Multi-Function System with Multi-Reflection Suppression® (MRS®) sensor technology provides the ultimate combination of high resolution, high accuracy and high speed for inspection and metrology. It remains the only system on the market capable of performing AOI, SPI and CMM in-line.VIEW DETAILSSQ3000™+ MULTI-FUNCTION FOR 3D AOI, SPI & CMM
Fulfill® Retrofit Adhesive Fill Kit
Fulfill Retrofit adhesive fill kit allows operators to get the benefits of an automatic adhesive fill system with melters already installed. The Nordson Fulfill Retrofit kit is available as a simple field installation on most Nordson melters used in packaging.VIEW DETAILSFULFILL® RETROFIT ADHESIVE FILL KIT
SolidBlue Adhesive Applicators | Nordson Adhesive Dispensing Systems
SolidBlue applicators feature EasyOn™ module mounting. SolidBlue guns and modules provide up to twice the service life of other guns, reducing module replacement costs.VIEW DETAILSSOLIDBLUE ADHESIVE APPLICATORS | NORDSON ADHESIVE DISPENSING SYSTEMS
Spectra Control System | Nordson Adhesive Dispensing Systems
Advanced pattern control technology delivers simple, accurate and reliable pattern programming and control. Spectra systems, Nordson’s next generation pattern controls, reduce complexity while improving product quality and production efficiency.VIEW DETAILSSPECTRA CONTROL SYSTEM | NORDSON ADHESIVE DISPENSING SYSTEMS
Parent Machine Integration Starter Kits | Nordson Adhesive Dispensing Systems
Nordson’s all-inclusive starter kits make integrating melters into parent machines much easier and faster for PLC engineers. Offering better support for our customers at no additional cost, the starter kits reduce PLC programming time from over 50 hours to less than a day–in some cases, less than an hour.VIEW DETAILS


Saturn Nozzles | Nordson Adhesive Dispensing Systems
Saturn nozzles feature color-coded rings* that indicate the orifice and engagement, allowing you to select the correct replacement nozzle every time. Dual rings are your assurance of genuine Nordson quality and performance.VIEW DETAILSSATURN NOZZLES | NORDSON ADHESIVE DISPENSING SYSTEMS
SureBead Adhesive Guns | Nordson Adhesive Dispensing Systems
Self-cleaning SureBead guns minimize maintenance, downtime and replacement costs.  Integrated needle-and-seat, reduced cavity nozzle design provides virtually clog-free operation, even with aggressive hot melt adhesives.VIEW DETAILSSUREBEAD ADHESIVE GUNS | NORDSON ADHESIVE DISPENSING SYSTEMS
Saturn Solenoid Valves | Nordson Adhesive Dispensing Systems
Saturn solenoid valves are designed specifically for hot melt adhesive dispensing and feature high-temperature seals and components. These 3- and 4-way piloted valves deliver maximum shifting force in both directions for resistance-free shifting, increased reliability and consistent response times.VIEW DETAILSSATURN SOLENOID VALVES | NORDSON ADHESIVE DISPENSING SYSTEMS
MiniBlue II Hot Melt Applicator | Nordson
Nordson's MiniBlue II applicator provides the longest service life of any pneumatic gun in the packaging industry. MiniBlue II applicators apply adhesive at high speeds with dispensing times as low as 2 milliseconds.VIEW DETAILSMINIBLUE II HOT MELT APPLICATOR | NORDSON
Software SEMI
CyberSpectrum is a powerful yet extremely simple software with an intuitive interface providing numerical and visual feedback for real-time measurement and analysis for multiple applications. The WaferSense Software Development Kit provides the Application Programming Interface (API) to the WaferSense® and ReticleSense® family of devices. This allows direct integration of the device into user developed software applications.
VIEW DETAILSSOFTWARE SEMI
ReticleSense® Auto Multi Sensor™ (AMSR)
Speed vibration, leveling and humidity measurements with an all-in-one measurement device. Improve yields.
VIEW DETAILSRETICLESENSE® AUTO MULTI SENSOR™ (AMSR)
EcoBead™ E Electric Applicator Driver | Nordson Adhesive Dispensing Systems
The EcoBead E driver is a high-performance device that easily installs in a control cabinet to interface with a PLC. It is a two-trigger, two output-channel driver for electric applicators.VIEW DETAILSECOBEAD™ E ELECTRIC APPLICATOR DRIVER | NORDSON ADHESIVE DISPENSING SYSTEMS
ATS Retrofit Kits
An easy-to-use ATS retrofit kit contains all the pieces required to add adhesive tracking capabilities to any Nordson packaging melter.VIEW DETAILSATS RETROFIT KITS
BBconn Cloud and Control System | Nordson Adhesive Dispensing Systems
This dynamic new platform opens the door to complete machine integration, which means users can now operate all Nordson equipment from a single interface. VIEW DETAILS


E-400 Electric Applicators
For high-speed bead applications, E-400 series electric guns provide optimum performance and superior accuracy. With cycle rates below 6 milliseconds, E-400 guns accommodate a wide range of viscosities and provide superior repeatability for greater bead pattern control and consistency.VIEW DETAILSE-400 ELECTRIC APPLICATORS
e.dot+ Adhesive Applicators | Nordson Adhesive Dispensing Systems
e-dot+ applicators are all-electric and provide precise, high-speed dot and bead placement. These compact adhesive guns deliver quiet operation and a reliable, long service life.
 
VIEW DETAILSE.DOT+ ADHESIVE APPLICATORS | NORDSON ADHESIVE DISPENSING SYSTEMS
EcoBead ™ Inspect Pattern Generation and Verification
Reach continuous improvement goals through adhesive savings and reduced waste. Economical and easy to use, the EcoBead Inspect lets you dispense short, intermittent bead patterns and verify the placement of adhesive on a surface.VIEW DETAILSECOBEAD ™ INSPECT PATTERN GENERATION AND VERIFICATION
EcoBead Pattern Generator | Nordson Adhesive Dispensing Systems
Economical and easy to use, the EcoBead pattern generator lets you apply short, intermittent beads in place of long continuous beads by enabling your parent machine controls. The need to reprogram your PLC or add a conventional pattern controller is eliminated.VIEW DETAILSECOBEAD PATTERN GENERATOR | NORDSON ADHESIVE DISPENSING SYSTEMS
AMI SpinSAM - Scanning - Acoustic - Microscopy
Industry leading throughput on four 300mm wafer inspection
Best in class footprint / UPH
Leading defect capture and image quality
Modular design for ease of serviceability
Fully automated inspection and analysis with factory communication
 
VIEW DETAILSAMI SPINSAM - SCANNING - ACOUSTIC - MICROSCOPY
SQ3000™ 3D AOI - Automated Test and Inspection
The SQ3000 is an all-in-one solution that’s loaded with powerful tools that cover inspection and measurement for Automated Optical Inspection (AOI), Solder Paste Inspection (SPI) and coordinate measurement (CMM) applications.
SQ3000 for an AOI system is also available.
VIEW DETAILSSQ3000™ 3D AOI - AUTOMATED TEST AND INSPECTION
Encore® - Automatic Powder Coating Gun
A reliable and robust powder gun, producing up to 100 kV of electrostatic charge for the highest transfer efficiency. Designed for consistent superior coating and the fastest color changes in all industrial painting environments.VIEW DETAILSENCORE® - AUTOMATIC POWDER COATING GUN
Manual Powder Coating Systems
Encore manual powder coating guns are designed for rugged, everyday use. Incorporating all the right features at an affordable price, the guns are durable, easy to use and service, and offer superior transfer efficiency and overall coating performance for producing the highest quality finished products.VIEW DETAILSMANUAL POWDER COATING SYSTEMS
TrueCoat® HP Slot Applicators
TrueCoat® HP (High-Performance) Slot Applicators are developed to improve the industry standard for achieving high accuracy of adhesive distribution in cross-web and machine direction.VIEW DETAILS


TruFlow™ Flex Controllers
TruFlow Flex Controllers are an economical, easy-to-use monitoring and closed-loop control of material delivery that offers manufacturers enhanced product quality.VIEW DETAILSTRUFLOW™ FLEX CONTROLLERS
Universal™ Slice Applicator
Universal Slice applicators provide cost-efficient production flexibility by dispensing different hot melt adhesive spraying and coating patterns from a single applicator. VIEW DETAILSUNIVERSAL™ SLICE APPLICATOR
PatternJet Plus Hot Melt Dispensing Applicators
PatternJet applicators deliver precise, consistent adhesive placement and clean cut-off in high-speed, intermittent spray applications, leading to cost savings through less adhesive waste, cleaner operations and less maintenance. These versatile hot melt applicators also feature a flexible design that allows for custom configuration and speeds changeovers for cost-efficient production flexibility.VIEW DETAILSPATTERNJET PLUS HOT MELT DISPENSING APPLICATORS
TrueCoat FS Slot Applicator Series
TrueCoat FS slot applicators deliver operating efficiency and flexibility when applying coated substrates to boards / panels or profiles used in furniture, woodworking and building / construction applications. Accurate, reliable adhesive application in both cross-web and machine directions improves product quality and reduces adhesive consumption. TrueCoat FS applicators are available to handle traditional hot melt adhesives such as EVAs and polyolefins, or reactive moisture-cure polyurethanes (PUR).VIEW DETAILSTRUECOAT FS SLOT APPLICATOR SERIES
AltaBlue TT Melter for Precise Handheld Applications
The AltaBlue™ TT for Precise Handheld Applications are specially designed for mattresses and other handheld applications.VIEW DETAILSALTABLUE TT MELTER FOR PRECISE HANDHELD APPLICATIONS
AltaBlue TT Melters
AltaBlue melters are designed for precise delivery of a wide variety of hot melt adhesives. Metering spur-gear pumps, variable-speed AC motors and key-to-line functionality provide a flexible design.VIEW DETAILSALTABLUE TT MELTERS
OptiStroke™ Needle Stroke Detection System
The patented OptiStroke system reduces product waste and confirms hot melt adhesive dispensing performance by verifying valve actuation and fatigue. Ideal for applications where product-yield loss is critical, the system is compatible with Nordson Universal™ modules, Speed-Coat™ modules and Harmony modules.
 
VIEW DETAILSOPTISTROKE™ NEEDLE STROKE DETECTION SYSTEM
Universal™ Summit™ Nozzles
Universal Summit nozzles improve bond strength and product quality in hot melt adhesive nonwovens and product assembly laminating applications.VIEW DETAILSUNIVERSAL™ SUMMIT™ NOZZLES
Universal™ CF® Nozzles
Universal CF nozzles deliver consistent hot melt adhesive spray coverage, high bond strengths and low add-on rates.VIEW DETAILS


Allegro Elastic Attachment Nozzles
Patented Allegro nozzles use a novel air-assisted contact coating technology to apply hot melt adhesives to single or multiple elastic strands in nonwoven disposable hygiene article manufacturing.VIEW DETAILSALLEGRO ELASTIC ATTACHMENT NOZZLES
AltaPail II Bulk Melters
AltaPail II bulk melters use an intuitive touch-screen operator interface to simplify set-up, monitoring and operation of bulk adhesive delivery. The precise, variable-speed melter offers production flexibility while protecting adhesive integrity, even reactive hot melt polyurethane (PUR) adhesives.VIEW DETAILSALTAPAIL II BULK MELTERS
PureFlow™ Hoses with RediFlex™ II Mounting System
Innovative technology drastically reduces adhesive degradation and associated downtime.VIEW DETAILSPUREFLOW™ HOSES WITH REDIFLEX™ II MOUNTING SYSTEM
Universal™ Modules
Universal modules deliver advanced performance for accurate hot melt adhesive dispensing. A single-platform design simplifies in-house rebuilding and reduces maintenance and inventory costs. Modules accommodate many Nordson technologies, including Universal CF®, Summit™, SureWrap™, Control Coat®, Signature™, bead and dot nozzles.VIEW DETAILSUNIVERSAL™ MODULES
Unity 4axis Automated Dispensing Systems
The Unity 4axis robots offer a specialized rotation table, which provides a more stable and accurate dispensing in precise hot melt applications than traditional 4axis robots.VIEW DETAILSUNITY 4AXIS AUTOMATED DISPENSING SYSTEMS
FlexSeam Adhesive Applicator
Nordson FlexSeam™ adhesive applicators (for 4-axis robot) are designed to jet/ slot-coat hot melt PUR adhesives with various patterns on a wide range of fabric materials to support the PUR based fabric bonding applications.VIEW DETAILSFLEXSEAM ADHESIVE APPLICATOR
Pro-Meter VDK Module
The Pro-Meter VDK module combines gear-metering technology with compact size to precisely dispense high-viscosity hot melt adhesives, silicones, butyls and epoxies. It is compatible with Nordson melters, FoamMix® and FoamMelt® systems.VIEW DETAILSPRO-METER VDK MODULE
VersaPUR® Melters
VersaPUR melters efficiently process polyurethane (PUR) hot melt adhesives with an easy-to-use, easy-to-clean design to simplify operation and maintenance. Highly-versatile VersaPUR melters are configurable for specific applications and manufacturing processes.VIEW DETAILSVERSAPUR® MELTERS
Unity™ PURJet Series Dispensers
Nordson Unity PURJet dispensing systems provide accurate dispensing of heated PUR adhesives in 30 mL syringes and 300 mL cartridges. Unity dispensers help extend the useful life of the syringe to maximize material use and minimize residual waste.VIEW DETAILS


AltaPUR Adhesive Melters
AltaPUR melters efficiently process moisture-cure reactive adhesives, such as polyurethanes (PUR), from two-, three- or four-kilogram foil-encased slugs or form-liner slugs with foil bottoms. A user-friendly design combines simple, reliable operation with easy cleaning and maintenance. AltaPUR melters provide the ability to easily use small volumes of PUR for increased productivity and reduced adhesive waste.VIEW DETAILSALTAPUR ADHESIVE MELTERS
Universal™ TruFlow™ Dividers
Universal TruFlow dividers improve material add-on accuracy and reduce material consumption by providing passive metering closer to the point of application. A single incoming adhesive stream can be divided, or separated, into as many as eight individual streams.VIEW DETAILSUNIVERSAL™ TRUFLOW™ DIVIDERS
AltaSpray™-c Applicators
AltaSpray™-c applicators provide the flexibility and performance capabilities of a single-platform, hot melt adhesive dispensing design.VIEW DETAILSALTASPRAY™-C APPLICATORS
ECC 702 Cable Coating System
ECC 702 coating systems provide precise process control for applying various powders, including talcs and superabsorbent powders (SAPs), for cable coating applications. The systems charge powders for high-quality, reproducible application of desired coating thicknesses.VIEW DETAILSECC 702 CABLE COATING SYSTEM
AltaSpray™-i Applicators
AltaSpray-i applicators provide the flexibility and performance capabilities of a single-platform, hot melt adhesive dispensing design for mid-speed intermittent spray applications.VIEW DETAILSALTASPRAY™-I APPLICATORS
Ultra FoamMix® Processor Systems
Ultra FoamMix applicators dramatically improve performance of most hot melt adhesives by mixing them with inert gas. When the material is dispensed the gas expands to create a closed-cell foam. The foamed material provides many benefits over conventional adhesive dispensing.VIEW DETAILSULTRA FOAMMIX® PROCESSOR SYSTEMS
Piston and Diaphragm Pumps
A selection of piston and diaphragm pumps maximizes delivery of cold adhesives, including PVA, solvent-based, starch and dextrin adhesives for packaging, converting and product assembly applications.VIEW DETAILSPISTON AND DIAPHRAGM PUMPS
AltaSlot™ Applicators
AltaSlot applicators offer reliable performance and simplified set-up for thorough, consistent continuous or intermittent coating of customer specific applications. These applicators are designed to deliver long cycle life and repeatable application patterns.VIEW DETAILSALTASLOT™ APPLICATORS
DuraBlue II Melters
Provide easy, reliable material delivery for low to mid-speed adhesive bonding processes.VIEW DETAILS


Unity Pre-warmer Automated Dispensing Systems
The 30 and 300cc pre-warmer systems are engineered to provide fast heating speeds and stable performance to precise hot melt dispensing applications using Nordson Unity dispensing systems.VIEW DETAILSUNITY PRE-WARMER AUTOMATED DISPENSING SYSTEMS
Pressure Regulators
Pressure regulators reduce pressure drops during production line stops to provide accurate cold adhesive flow and improve pattern performance.VIEW DETAILSPRESSURE REGULATORS
OptiBond™ Nonwovens Solutions
Nordson variation management systems allow manufacturers to MEASURE, UNDERSTAND and IMPROVE material dispensing across the full machine speed range.VIEW DETAILSOPTIBOND™ NONWOVENS SOLUTIONS
DuraDrum Bulk Melters (Heated)
DuraDrum bulk melters deliver simple, low-maintenance application of hot melt adhesives, sealants and butyls. Modular, non-stick platens, available for 200-liter (55-gal) drums, melt adhesive on top surface of drum only, reducing thermal stress and protecting bonding characteristics.VIEW DETAILSDURADRUM BULK MELTERS (HEATED)
FoamMix Flex Dispensing System
The Nordson FoamMix Flex dispensing system mixes a variety of reactive and non-reactive materials, either heated or ambient, with inert gas to create a homogeneous mixture.VIEW DETAILSFOAMMIX FLEX DISPENSING SYSTEM
Sapphire™ Adhesive Applicators | Nordson Adhesive Dispensing Systems
Sapphire™ applicators are ultra-high speed adhesive guns that deliver precise and repeatable adhesive placement.VIEW DETAILSSAPPHIRE™ ADHESIVE APPLICATORS | NORDSON ADHESIVE DISPENSING SYSTEMS
PatternJet Hot Melt Dispensing Guns
Easily integrated into most packaging lines, these versatile hot melt guns maximize application flexibility and deliver sharp cut-off in high-speed lines. The PatternJet gun’s flexible design speeds product changeovers.VIEW DETAILSPATTERNJET HOT MELT DISPENSING GUNS
DuraPail Bulk Melters (Heated)
DuraPail bulk melters deliver simple, low-maintenance application of hot melt adhesives, sealants and butyls. Modular, non-stick platens, available for 20-liter (5-gal) pails, melt adhesive on top surface of pail only, reducing thermal stress and protecting bonding characteristics.VIEW DETAILSDURAPAIL BULK MELTERS (HEATED)
Concert™ Series Temperature Controllers
Concert temperature controllers are an easy, economical means to increase melter capacity and flexibility. Using a Concert temperature controller, a single melter can regulate up to three heating channels simultaneously.VIEW DETAILS


GP200 Remote Metering Station
GP200 remote metering stations expand production capabilities by increasing delivery points of existing melters with metered add-on precision. They provide an economical alternative to purchasing an additional melter, converting from non-metered delivery, or adding application points.VIEW DETAILSGP200 REMOTE METERING STATION
Vulcan Jet™ Dispensing Systems
Vulcan Jet series dispensing systems provide an advanced, intelligent dispensing solution with piezo-based jetting technology.VIEW DETAILSVULCAN JET™ DISPENSING SYSTEMS
SureFoam Dispensing System
SureFoam systems mix hot melt adhesives with inert gas to create a closed-cell foam when dispensed. The adhesive/gas mixture can be applied in a swirl or bead pattern for bonding applications. The foamed material increases manufacturing efficiency and improves finished product quality.VIEW DETAILSSUREFOAM DISPENSING SYSTEM
Unity Gantry Automated Dispensing Systems
The vision-guided gantry series system is engineered for precise hot melt dispensing using Nordson Unity dispensing systems.VIEW DETAILSUNITY GANTRY AUTOMATED DISPENSING SYSTEMS
Trio™ Variable Dispense Slot Applicator
Trio slot applicators produce patterns of differing add-on weights from a single applicator. Multiple dispensing modules and an array of three shims deliver tailored adhesive dispensing to improve product performance and production efficiency.VIEW DETAILSTRIO™ VARIABLE DISPENSE SLOT APPLICATOR
Precision Nozzles
Precision nozzles provide superior pattern placement to maximize product quality and reduce rejects. Flow accuracy and consistency increase control and reduce adhesive use.VIEW DETAILSPRECISION NOZZLES
BC Coating & Laminating Applicators
The BC coating and laminating applicators deliver complete coverage at low application weight tolerances for web widths up to 4000 mm (157 in.).VIEW DETAILSBC COATING & LAMINATING APPLICATORS
EB 60 Flex Edge Banding Slot Applicator
The EB 60 Flex applicator uses volume compensation during coating width changes to eliminate squeeze-out and/or excess air, thereby making saleable product from the very first panel of a production run. The flexible system for edge banding applications supports various adhesives; a range of coating widths; and a variety of panel shapes.VIEW DETAILSEB 60 FLEX EDGE BANDING SLOT APPLICATOR
EB 60V Edge Banding Slot Applicator
The EB60V edge banding applicator replaces open glue roller systems with slot nozzle technology for consistent adhesive application to the edge of the panel. Apply a wide range of hot melt adhesives, including EVA, polyolefin and PUR materials for edge banding and back-edge sealing.VIEW DETAILS