Omron OMRON ZX-GT28R + ZX-GT28E11 & ZX-GTC11 | Smart measurement Sensor & Controller

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm OMRON

• 

  Bạn đã biết: Cảm biến đo lường thông minh sử dụng công nghệ CCD scan?

• 

  Các models thuộc dòng cảm biến Thu-phát E3Z-LT... của Omron | E3Z-LT... Series Through-beam photoelectric Sensor

• Xem thêm

Smart measurement Sensor & Controller Omron OMRON ZX-GT28R + ZX-GT28E11 & ZX-GTC11

 

Output type	NPN
Appearance	Separate type
Light source	Visible semiconductor laser diode (wavelength 650 nm, CLASS 1 of EN60825-1/
	IEC60825-1, CLASS II of FDA (21CFR 1040.10 and 1040.11)
Measuring width	28 mm
Sensing distance	0 to 500 mm
Minimum sensing object	0.5 mm dia. *1
Linearity	±0.1%F.S. *2
Resolution	10 μm (number of process values to average: 16) *3
Temperature	0.01%F.S/°C *4
characteristic
Indicators (emitter)	Laser ON indicator (green), laser alarm indicator (red)
Indicators (receiver)	Optical axis setting indicator (green)
Laser OFF input/sync	ON: Short-circuited with 0 V or 1.5 V max.
input	OFF: Open (leakage current: 0.1 mA max.)
Laser deterioration	NPN open-collector output
alarm output	30 VDC 20 mA max.
	Residual voltage 1.2 V max.
Power consumption	30 mA max.
(emitter)
Power supply voltage	24 VDC +10%, -15% ripple (p-p) 10% max.
(emitter)
Dielectric strength	1,000 VAC, 50/60 Hz for 1 min
Insulation resistance	20 MΩ (at 500 VDC)
Operating ambient	3,000 lx (incandescent light)
illumination (emitter)
Operating ambient	1,000 lx (incandescent light) *5
illumination (receiver)
Ambient temperature	Operating: 0 to 40°C Storage: -15 to 50°C (with no icing or condensation)
Ambient humidity	Operating and storage: 35% to 85% (with no condensation)
Vibration resistance	10 to 150 Hz Single-amplitude: 0.75 mm for 80 min each in X, Y and Z directions
(durability)
Shock resistance	300 m/s2 3 times each in six directions (up/down, left/right, forward/backward)
(durability)
Degree of protection	IEC60529 IP40
Cable length	2 m
Material	Case: aluminum die-cast, Lens: glass
Weight (packed state)	Approx. 550 g
Accessories	Laser warning labels, Instruction Sheet

F.S.: 28 mm measuring range of receiver
*1. Distance between emitter and receiver: 500 mm, measurement object at 250 mm from receiver.
       Glass ends of chamfer 0.1 mm or more can be detected in glass edge measurement mode. (at binary level 70%)
*2. Linearity is given to be a typical error with respect to an ideal straight line when the distance between the emitter
       and receiver is 100 mm and light is blocked at a distance of 50 mm from the receiver.
       (On the ZX-GT2840[][], the measurement object is measured at a distance of 20 mm from the receiver.)
*3. The amount of fluctuation (±3σ) in the analog output when the distance between the emitter and receiver is 100 mm
       and a ZX-GTC[][] is connected
*4. Change in the light cutoff value on one side when the distance between the emitter and receiver is 100 mm and the
       light is half-cutoff at a distance of 50 mm from the receiver
       (On the ZX-GT2840[][], the measurement object is measured at a distance of 20 mm from the receiver.)
*5. Standard mode (NORM) used
 

Controller

Model		ZX-GTC11
Output type		NPN
Measurement cycle *1		1.5 ms (standard mode (NORM)) 0.5 ms (high-speed mode (FAST)) *2
Samples to average		1/2/4/8/16/32/64/128/256/512/1,024/2,048/4,096
Analog output *3		For current output: 4 to 20 mA/F.S., max. load resistance 300 Ω For voltage output:
		±4 V, (±5 V, 1 to 5 V *4), output impedance 100 Ω
Timing input, bank switching		ON: short-circuited with 0 V or 1.5 V max.
input, zero reset input,		OFF: Open (leakage current: 0.1 mA max.)
reset input
HIGH/PASS/LOW Judgment		NPN open-collector output
output *5 Sync output *6		30 VDC 50 mA max.
		Residual voltage 1.2 V max.
Indicator		Judgment output indicator: HIGH (orange), PASS (green), LOW (orange)
		Main display (red) Sub-display (yellow) Bank 1/2 (orange), zero reset (green)
Main	Number of	2 banks
functions	registered setups
	Measurement	Interrupted beam width measurement, incident beam width measurement, outer
	Mode	diameter measurement, center position measurement, IC lead pitch, IC lead width
		judgment, specified edge measurement, wire position measurement, glass edge
		position measurement
	Display during	Measured value, resolution, threshold, voltage output value, current output value
	measurement	(number of display digits can be changed)
	Zero reset	Offset setting of zero reset value, zero reset value memory
	functions
	Hold	Sample hold, peak hold, bottom hold, peak-to-peak hold, average hold, delay hold
	Timer functions	ON delay, OFF delay, one-shot
	Adjustment	Optical Axis adjust mode/light intensityt writing mode, variable binary level, variable
	functions	edge filter, analog output scaling
	Calculation	2 Possible on up to two Controllers (Calculation Unit ZX-CAL2 is required for
		connecting Controllers to each other.) A-B, A+B, width
	Other	Measurement cycle setting, threshold setting, hysteresis setting, initialization, key lock
Temperature characteristic		0.005%F.S./°C
Current consumption		150 mA max. with power supply voltage of 24 VDC (including receiver) *7
Power supply voltage		24 VDC +10%, .15% ripple (p-p) 10% max.
Dielectric strength		1,000 VAC, 50/60 Hz for 1 min
Insulation resistance		20 MΩ (at 500 VDC)
Ambient temperature		Operating: 0 to 50°C Storage: .15 to 60°C (with no icing or condensation)
Ambient humidity		Operating and storage: 35% to 85% (with no condensation)
Vibration resistance		10 to 150 Hz Single-amplitude: 0.35 mm for 80 min each in X, Y and Z directions
(durability)
Shock resistance (durability)		300 m/s2 3 times each in six directions (up/down, left/right, forward/backward)
Degree of protection		IEC60529 IP20
Cable length		2 m
Material		Case: PBT (polybutylene terephthalate), Cover: Polycarbonate
Weight (packed state)		Approx. 330 g
Accessories		Instruction Sheet

*1. A simple average is used in IC lead pitch judgment mode or IC lead width judgment mode.
       The measurement cycle time can be calculated as follows: Specified measurement cycle time × (Number of samples
       to average + 1) + 1 ms max.
       In other measurement modes, a moving average is used. The first measurement cycle time can be calculated as
       follows: Specified measurement cycle time × (Number of samples to average + 1) + 1 ms max. The second and
       later measurement cycle times will be equal to the specified measurement cycle time.
*2. The response time in the high-speed mode (FAST) for the IC lead pitch and IC lead width judgment modes is 1 ms.
*3. Current/voltage can be switched using the switch provided on the rear of the Controller.
*4. Can be set by the analog output scaling function.
*5. The error (ERR) state is displayed when all HIGH/PASS/LOW outputs turn OFF.
*6. Normally, wire the sync output wire directly to the emitter’s sync input wire and run the Controller in the standard
       mode. On an NPN type Controller, use an NPN type emitter, and on a PNP type Controller, use a PNP type emitter.
       Wiring of the sync wires is not required when the Controller is run in the high-speed mode.
       (Note, however, that the Controller becomes more susceptible to the influence of ambient light in this case.)
*7. The value is 175 mA max. (including receiver) when current output is set.
 

Interface Unit

Model	ZX-GIF11/-GIF11A
Compatible Controller	ZX-GTC11
Indicator	Power ON (green), Controller communications (orange), Controller
	communications error (red), RS-232C communications (orange), RS-232C
	communications error (red), binary output (orange)
Communications port	RS-232C (9-pin D-sub connector)
12-bit binary output	NPN open-collector output
(D11 to D0, GATE)	30 VDC 20mA max.
	Residual voltage 1.2 V max.
Power supply voltage	Supplied from Controller (power consumption: 60 mA max.)
Dielectric strength	1,000 VAC, 50/60 Hz for 1 min
Insulation resistance	20 MΩ (at 500 VDC)
Ambient temperature	Operating: 0 to 50°C Storage: .15 to 60°C (with no icing or condensation)
Ambient humidity	Operating and storage: 35% to 85% (with no condensation)
Vibration resistance (durability)	10 to 150 Hz Single-amplitude: 0.35 mm for 80 min each in X, Y and Z directions
Shock resistance (durability)	300 m/s2 3 times each in six directions (up/down, left/right, forward/backward)
Degree of protection	IEC60529 IP20
Cable length	RS-232C 0.5 m, binary output 2 m
Materials	Case: PBT (polybutylene terephthalate), Cover: Polycarbonate
Weight (packed state)	ZX-GIF[]1A: Approx. 550 g
	ZX-GIF[]1: Approx. 330 g
Accessories	ZX-GIF[]1A: Setup Software (CD-ROM), 2 clamps, Instruction Sheet
	ZX-GIF[]1: 2 clamps, Instruction Sheet