OPTEX Products

Intruder Detection Sensors and Systems

We support the safety of people from important facilities related to social infrastructure to ordinary homes with advanced safety management technologies such as "security sensor system" which detects intruders and deters crimes in advance.
 

Photoelectric Detectors

Detected by blocking the infrared beam emitted from the transmitter. It can be used for a wide range of applications such as security, parking alarm and camera linkage.
 

Long Range Models : SL Series

SL series is designed to lighten your workload with achieving perfect alignment.
Long Range Models : SL Series
 

QDM Series (Advanced Model)

SL-200QDM[60m]
SL-350QDM[100m]
SL-650QDM[200m]
QDP Series (Standard Model)
SL-200QDP[60m]
SL-350QDP[100m]
SL-650QDP[200m]
QN Series (Basic Model)
SL-200QN[60m]
SL-350QN[100m]
SL-650QN[200m]
 

Long Range Models for Beam Tower : SL-BT Series

These models are designed for use in beam tower, therefore these are not included the cover and chassis.
 

Long Range Models for Beam Tower : SL-BT Series

Wired Model
SL-200QDP-BT[60m]
SL-350QDP-BT[100m]
SL-650QDP-BT[200m]
Wireless Model
SL-350QFR-BT[100m]
 

Short Range Models : AX-TF Series

Short range photoelectric detectors are compact in design with selectable beam frequencies.
 

Short Range Models : AX-TF Series

AX-100TF[30m]
AX-200TF[60m]
 

Short Range Models : AX-TN Series

The short-range photoelectric detector has a compact design and a durable IP65 construction. Delivers reliable performance even under harsh outdoor environmental conditions.
 

Short Range Models : AX-TN Series

AX-70TN[20m]
AX-130TN[40m]
AX-200TN[60m]
 

Short Range Model for Building Perimeter : BX-100PLUS

Attractive slender design photoelectric detector for building perimeter.
 

Short Range Model for Building Perimeter : BX-100PLUS

BX-100PLUS[30m]
 

Battery Operated Long Range Model : SL-QFR and QNR Series

Typical perimeter systems require expensive trenching or much time for installation. Expensive wire conduit runs and concrete work is unnecessary, allowing installers to save time and money.
 

Battery Operated Long Range Model : SL-QFR and QNR Series

SL-350QFR[100m]
SL-350QNR[100m]
SL-350QFR : 4ch. Beam Frequencies Selectable Model
SL-350QNR : Standard Model
 

Battery Operated Short Range Model : SL-TNR Series

The SL-TNR offers a cost-effective and versatile solution to protect a perimeter lineup to 60 m long, where cabling is an issue or inconvenient.
 

Battery Operated Short Range Model : SL-TNR Series

SL-100TNR[30m]
SL-200TNR[60m]
 

Battery Operated Short Range Model : AX-TFR Series

The AX-100/200TFR series is a "REVOLUTION" in the perimeter security industry,offering a significant cost saving alternative to a traditional hardwired system.
 

Battery Operated Short Range Model : AX-TFR Series

AX-100TFR[30m]
AX-200TFR[60m]
 

PIR Detectors

It detects far-infrared emitted from human body, and can be used to detect it from outside to inside.
 

Outdoor PIR Detectors

180 Degree Panoramic Outdoor PIR Detector : WX SHIELD Series

Integration of 4 PIR and 2 microwave sensors and SHIELD concept design

180 Degree Panoramic Outdoor PIR Detector : WX SHIELD Series
Wired Model
WXS-AM[Active IR anti-masking]
 
WXS-DAM[with Dual technology]
Battery Operated Model
WXS-RAM[Active IR anti-masking]
 
WXS-RDAM[with Dual technology]
 

Wide Angle Outdoor PIR Detector : VX SHIELD Series

12 m (40 ft.) by 90 degrees

Wide Angle Outdoor PIR Detector : VX SHIELD Series
Wired Model
VXS-AM[Active IR anti-masking model]
 
VXS-DAM[with Dual technology]
Battery Operated Model
VXS-RAM[Battery operated with active IR anti-masking]
 
VXS-RDAM[with Dual technology]

Color variations
White/Black
 

Boundary Outdoor PIR Detector : BX SHIELD Series

24 m (12 m on each side) narrow detection areas

Boundary Outdoor PIR Detector : BX SHIELD Series
Wired Model
BXS-ST[Standard]
 
BXS-AM[Active IR anti-masking]
Battery Operated Model
BXS-R[Battery operated]
 
BXS-RAM[Battery operated model with active IR anti-masking]

Color variations
White/Black
 

180 Degree Panoramic Outdoor PIR Detector : WX INFINITY Series

180 degree wall-to-wall coverage for right coverage with flexibility to eliminate blind spots

180 Degree Panoramic Outdoor PIR Detector : WX INFINITY Series
Wired Model
WXI-ST[Standard]
 
WXI-AM[Active IR anti-masking]
Battery Operated Model
WXI-R[Battery operated]
 
WXI-RAM[Battery operated with active IR anti-masking]
 

Wide Angle Outdoor PIR : VX INFINITY Series

Wide angle (90 degrees) with 40 ft (12 m) detection range

Wide Angle Outdoor PIR : VX INFINITY Series
Wired Model
VXI-ST[Standard]
 
VXI-AM[Active IR anti-masking]
 
VXI-DAM[with Dual technology]
Battery Operated Model
VXI-R[ Battery operated]
 
VXI-RAM[with active IR anti-masking]
 
VXI-RDAM[with Dual technology]
 

Outdoor PIR Detector for Building Perimeter : BX-80N Series

24 m (12 m on each side) narrow detection areas

Outdoor PIR Detector for Building Perimeter : BX-80N Series
Wired Model
BX-80N
Battery Operated Model
BX-80NR
 

High Mount Outdoor PIR / Combination Detector : HX-40 Series

High mount (2.5 m - 3 m) out door PIR with 40 ft range

High Mount Outdoor PIR / Combination Detector : HX-40 Series
Wired Model
HX-40[Standard]
 
HX-40AM[with active IR anti-masking]
Battery Operated Model
HX-40DAM[Dual technology with active IR anti-masking]
 
HX-40RAM[Battery Operated]
High mount (2.5 m - 3 m) outdoor PIR with 40 ft range
 

24M Long and Narrow Range High Mount Outdoor PIR Detector : HX-80N Series

High mount (2.5 m - 3 m) out door PIR with 80 ft (24 m) range

24M Long and Narrow Range High Mount Outdoor PIR Detector : HX-80N Series
Wired Model
HX-80N[Standard model]
 
HX-80NAM[Active IR anti-masking model]
Battery Operated Model
HX-80NRAM[Battery operated model with active IR anti-masking model]
High mount (2.5 m - 3 m) out door PIR with 80 ft (24 m) range
 

Wide Angle Outdoor Detector : QX INFINITY Series

120 degree wide and 12 m (40 ft.) detection area. Either high or low mount are selectable.

Wide Angle Outdoor Detector : QX INFINITY Series
Wired model
QXI-ST[Standard]
 
QXI-DT[Dual technology]
Battery operated model
QXI-R[Standard]
 
QXI-RDT[Dual technology]
* MW frequency [10.525 GHz(X5), 10.587 GHz(X8), 9.425 GHz(X9)]
 

Outdoor PIR Detector : LX Series

A robust, weatherproof and specifically designed Outdoor PIR for short-range outdoor applications.

Outdoor PIR Detector : LX Series
LX-402[Standard]
 
LX-802N[Long range]
 

Compact Outdoor Detector : FTN Series

FTN Series offers the perfect solution for those outdoor areas where environmental disturbances and small animals may cause false alarms.

Compact Outdoor Detector : FTN Series
Wired Model
FTN-ST[Standard]
 
FTN-AM[Active IR anti-masking]
Battery Operated Model
FTN-R[ Battery operated]
 
FTN-RAM[Active IR anti-masking]
 

Indoor PIR Detectors

PIR Detector / PIR Microwave Combination Detector : FlipX Series

FlipX is the indoor motion detector with a lot of highly evaluated features for existing indoor motion detectors.

PIR Detector / PIR Microwave Combination Detector : FlipX Series
Standard Model
FLX-S-ST[Standard]
 
FLX-S-DT[Dual technology]
Professional Model
FLX-P-ST[Standard]
 
FLX-P-DT[Dual technology]
Advanced Model
FLX-A-AM[Active IR anti-masking]
 
FLX-A-DAM[Dual technology with active IR anti-masking]
Standard Model
-12 m (40 ft.) 85 degree Wide
-18 m (60 ft.) Narrow

FLX-S-DT-X5 : 10.525 GHz
FLX-S-DT-X8 : 10.587 GHz
FLX-S-DT-X9 : 9.425 GHz

Professional Model
-15 m (50 ft.) 85 degree Wide
-24 m (80 ft.) Narrow

FLX-P-DT-X5 : 10.525 GHz
FLX-P-DT-X8 : 10.587 GHz
FLX-P-DT-X9 : 9.425 GHz

Advanced Model
-15 m (50 ft.) 85 degree Wide
-24 m (80 ft.) Narrow

FLX-A-DAM-X5 : 10.525 GHz
FLX-A-DAM-X8 : 10.587 GHz
FLX-A-DAM-X9 : 9.425 GHz
 

PIR Detector / PIR Microwave Combination Detector : CDX Series

Grade 3 PIR and dual-technology with a range of 15 x 15 meters.

PIR Detector / PIR Microwave Combination Detector : CDX Series
CDX-AM[Active IR anti-masking]
 
CDX-NAM[Long range with active IR anti-masking]
 
CDX-DAM[Dual technology with active IR anti-masking]
CDX-AM : A Grade 3 (EN50131-2-2) PIR with a range of 15 x 15 meters.
CDX-NAM : A Grade 3 (EN50131-2-2) narrow-focus PIR with a range of 2 x 24 meters.
CDX-DAM : A Grade 3 (EN50131-2-4) dual-technology with a range of 15 x 15 meters.

CDX-DAM-X5 : 10.525 GHz
CDX-DAM-X8 : 10.587 GHz
 

Long Range PIR Detector : CX-702 Series

The CX-702 series is designed to give extremely stable long-range detection performance in a variety of internal commercial and industrial applications.

Long Range PIR Detector : CX-702 Series
Wired Model
CX-702[Standard]
 
CX-702MKII[Double detection zones]
Battery Operated Model
CX-702RS[Battery operated]
 

PIR Detector / PIR Microwave Combination Detector : FMX Series

High performance PIR indoor detector for high-end residential and light commercial installation.

PIR Detector / PIR Microwave Combination Detector : FMX Series
FMX-ST[Standard model]
 
FMX-DST[with double conductive filter]
 
FMX-DT[Dual technology]
FMX-DT-X5 : 10.525 GHz
FMX-DT-X8 : 10.587 GHz
 

Digital Quad Zone Logic PIR Detector : RXC Series

Quad Zone Logic PIR. Dual technology and battery operated models are available.

Digital Quad Zone Logic PIR Detector : RXC Series
Wired Model
RXC-ST[Standard]
 
RXC-DT[Dual technology]
Battery Operated Model
RXC-RST[Battery operated]
 
RXC-RDT[Battery operated & Dual technology]
RXC-DT-X5 ; 10.525 GHz
RXC-DT-X8 ; 10.587 GHz
 

PIR Detector with Small Animal Immunity : RX-40 Series

Quad Zone Logic PIR.

PIR Detector with Small Animal Immunity : RX-40 Series
RX-40QZ[Standard]
 
RX-40PT[Standard with pet tolerance]
-RX-40QZ – small animal immunity model
-RX-40PT – pet tolerance model
 

360 Degree Ceiling-Mount PIR Detector : SX-360 Series

A ceiling-mount detector, with its unique zoom function and highly dense, triple-element detection pattern.

360 Degree Ceiling-Mount PIR Detector : SX-360 Series
SX-360Z
 

360 Degree Ceiling-Mount PIR Detector : FX-360 Series

A ceiling-mount detector with its unique, highly durable spherical lens offers unparalleled 360°detection performance.

360 Degree Ceiling-Mount PIR Detector : FX-360 Series
FX360
 

Indoor Recessed Mount PIR Detector : AP-360B/20NB

Recessed mount indoor PIR detectors with low profile installation for various application scenes.

Indoor Recessed Mount PIR Detector : AP-360B/20NB
360-degree PIR
AP-360B(C)[Wired model]
 
AP-360BR(C)[Battery operated]
Curtain PIR
AP-20NB(C)[Wired model]
 
AP-20NBR(C)[Battery operated]
Battery operated models are available at limited regions
The AP-360B/20NB is a series of recessed mount indoor PIR detectors.
AP-360B provides a 360-degree volumetric detection area. AP-20NB provides a 20 ft. (6m) curtain area.

These detectors can offer low profile installation for various application scenes.
 

Options for PIR

Multi Angle Wall and Ceiling Mount Bracket (EN-Grade III) : CW-G3
For FLX-A series
Multi Angle Wall and Ceiling Mount Bracket (EN-Grade II) : CW-G2
For FLX-S and FLX-P series
Multi Angle Wall Mount Bracket : CA-1W
For CX-702, LX-402/802N and QXI
Multi Angle Ceiling Mount Bracket : CA-2C
For CX-702, LX-402/802N and QXI
Multi Angle Wall Mount Bracket : FA-1W
For EX-35, FX-40, CX-502, DX-40/60, OML and CDX
Multi Angle Wall and Ceiling Mount Bracket : FA-3
For CX-502, CDX, DX-40/60, EX-35, FX-40, FMX, MX-40, RX-40, RXC, WNX-40
Multi Angle Wall Mount Bracket : BA-1W
For the BX-80NR.
Pole Mount Plate : PMP-01
For WXS and WXI
Masking Plate : MKP-01
For WXS and WXI
Battery Box : RBB-01
For VXI-R/RAM/RDAM, VXS-RAM/RDAM
Battery Holder : BH-01
For WXS and WXI
Wall Tamper : WRS-02
For VXI-ST/AM, FTN-ST/AM
Wall Tamper : WRS-03
For FTN-R/RAM
Wall Tamper : WRS-04
For VXI-R/RAM/RDAM
Spacer Unit for BX-80N : SP-2
For BX-80N
Back Cover for CX-702 : BA-70
For CX-702
Selectable Plug-In End Of Line Unit : PEU
For WXS, WXI, VXS, VXI, BXS, CDX, FMX
Back Box for VXS
For VXS-AM/RAM/DAM/RDAM
Face Cover for VXS
For VXS-AM/RAM/DAM/RDAM
Cover Unit for VXS
For VXS-AM/RAM/DAM/RDAM
VXI-T-Bracket
For VXI (VXI-ST/AM/DAM only)
Back Box for WX : WXI-BB
For WXS and WXI
18M Long-Range Lens : FL-60N
For FX-40, RX-40QZ/PT and RXC-ST
 

Redwall/Redscan

Redwall/Redscan products are specialized for video surveillance applications.
 

REDSCAN mini-Pro Series

Advanced 2D LiDAR sensor for outdoor and indoor intrusion detection. Customizable zones and detection logic fully integrated with various VMS platforms.

REDSCAN mini-Pro Series
RLS-2020V[20 x 20 m with FHD camera]
 
RLS-2020A[20 x 20 m without camera]
Advanced 2D LiDAR sensor for outdoor and indoor intrusion detection. Customizable zones and detection logic fully integrated with various VMS platforms.
 

REDSCAN Pro Series

Highly accurate outdoor and indoor security sensor using LiDAR technology with advanced detection performance, long-range customisable detection and environment resistance.

REDSCAN Pro Series
RLS-50100V[50 x 100 m]
 
RLS-3060V[30 x 60 m]
Highly accurate outdoor and indoor security sensor using LiDAR technology with advanced detection performance, long-range customisable detection and environment resistance.

190 degree, PoE+ LiDAR sensor, ONVIF profile S compliant for outdoor and indoor high security applications
 

RLS-3060 Series

It can detect a moving object's size, speed, and distance from the detector and process that information with a unique algorithm, which results in hi-reliability detection of people with minimal false alarms.

RLS-3060 Series
RLS-3060L[Standard model]
 
RLS-3060SH[Advanced model]
 

RLS-2020 Series

An IP/PoE laser scan detector, providing up to 20 x 20 m ( 65 x 65 ft.) detection range horizontally or vertically.

RLS-2020 Series
RLS-2020I[Indoor model]
 
RLS-2020S[Indoor / outdoor model]
The REDSCAN mini RLS-2020I/RLS-2020S are IP/PoE laser scan detector providing 20 x 20 m vertical or horizontal detection area. The RLS-2020I/RLS-2020S help to protect assets, equipment, walls and ceilings by creating an invisible laser wall and detecting any intrusion breaching it. Its compact, cosmetic and versatile design makes it very easy to install and covers many different configurations. The RLS-2020I/RLS-2020S generate unique REDWALL Event Codes that are already integrated with many popular Video Management Systems (VMS), allowing it to trigger events.

In addition, it also supports multiple network protocols for integration with VMS platforms and Physical Security Information Management (PSIM) platforms which may require HTTP/HTTPS, SNMP, etc..Not impacted by any lighting conditions, the RLS-2020I/RLS-2020S will act as a trigger to enhance video surveillance or a wide range of security systems.

RLS-2020S is the detector for outdoor and indoor use. For indoor applications, the RLS-2020S can be set up in high resolution mode which enables very small object detection; it can also be set up in “indoor throwing mode” allowing to detect an object been thrown into a controlled area. 　

With the RLS-2020S firmware ver.3, Detection range expansion mode which contributes to reduce installation costs becomes available.

 

Synthesized Intelligent PIR : SIP-3020/4010/404 series

Detectors in the REDWALL-V Series are ideal for triggering outdoor camera systems where high performance is required.

Synthesized Intelligent PIR : SIP-3020/4010/404 series
Standard model
SIP-3020[30m x 20m]
 
SIP-4010[40m x 10m]
 
SIP-404[40m x 4m]
With PoE / IP encoder model
SIP-3020-IP[30m x 20m with PoE / IP encoder]
 
SIP-4010-IP[40m x 10m with PoE / IP encoder]
 
SIP-404-IP[40m x 4m with PoE / IP encoder]
The SIP-3020, SIP-4010, and SIP-404 detectors in the REDWALL-V Series are designed for use in small and mid-sized outdoor areas. They have an intelligent detection system that uses data on the ambient environment, such as temperature and illuminance conditions, to automatically adjust the sensitivity.

Mechanisms for easy installation enable accurate adjustment of the detection area at setup, which results in more reliable operation. The optional AVF-1 Area View Finder allows the installer to visually identify the detection area.

The detectors are also equipped with anti-rotation and anti-masking. They can also detect vandalism or tampering on the units. These functions provide greater security in operations.

Detectors in the REDWALL-V Series are ideal for triggering outdoor camera systems where high performance is required.
 

Synthesized Intelligent PIR with creep zone : SIP-3020/5, 4010/5, 404/5 series

SIP-3020/4010/404 with creep zone

Synthesized Intelligent PIR : SIP-3020/4010/404 series
Standard model
SIP-3020[30m x 20m]
 
SIP-4010[40m x 10m]
 
SIP-404[40m x 4m]
With PoE / IP encoder model
SIP-3020-IP[30m x 20m with PoE / IP encoder]
 
SIP-4010-IP[40m x 10m with PoE / IP encoder]
 
SIP-404-IP[40m x 4m with PoE / IP encoder]
The SIP-3020, SIP-4010, and SIP-404 detectors in the REDWALL-V Series are designed for use in small and mid-sized outdoor areas. They have an intelligent detection system that uses data on the ambient environment, such as temperature and illuminance conditions, to automatically adjust the sensitivity.

Mechanisms for easy installation enable accurate adjustment of the detection area at setup, which results in more reliable operation. The optional AVF-1 Area View Finder allows the installer to visually identify the detection area.

The detectors are also equipped with anti-rotation and anti-masking. They can also detect vandalism or tampering on the units. These functions provide greater security in operations.

Detectors in the REDWALL-V Series are ideal for triggering outdoor camera systems where high performance is required.
 

Low Current Synthesized Intelligent PIR : SIP-3020WF/4010WF/404WF

The superior power management circuit achieves low current consumption without compromising the rich functionality.

Low Current Synthesized Intelligent PIR : SIP-3020WF/4010WF/404WF
SIP-3020WF[30m x 20m]
 
SIP-4010WF[40m x 10m]
 
SIP-404WF[40m x 4m]
The SIP-3020WF, SIP-4010WF and SIP-404WF are designed for use where a reliable low current detector is required. They have an intelligent detection system that monitors the temperature and illuminance of the environment and automatically adjusts the sensitivity. The detectors are also equipped with anti-rotation, anti-masking functions in addition to the anti-tamper feature which provides further security. The superior power management circuit achieves low current consumption without compromising the rich functionality.
 

Synthesized Intelligent PIR with creep zone : SIP-5030 / 100 series

Long Range SIP series with creep zone

Synthesized Intelligent PIR with creep zone : SIP-5030 / 100 series
SIP-5030[50m x 30m]
 
SIP-100[100m x 3m]
 
SIP-5030-IP[50m x 30m with PoE / IP encoder]
 
SIP-100-IP[with PoE / IP encoder]
 

GENIO Series

GENIO Wireeless Outdoor Control Panel and alarm monitoing software, GENIO Map
Video Verification

Outdoor Security Which Optex Believes
Home CCTV is a useful solution to record and know “What happened in the past". However, it does not give you any notifications when an intruder breaks into your house. Optex believes that having outdoor security is the most effective way to secure your safety. Imagine that you run into an intruder in your house. This is the worst situation. With outdoor security, it can notify you right after an intruder reaches your garden so that you can respond it earlier or even turn them away by the sound of outdoor siren.
Alarm Monitoring System
 

GENIO

GENIO is a wireless outdoor alarm system which can watch your home for 24 hours / 7 days including outdoor premises such as garden and backyar and enable to realize the most important measure for home security.
Wireless Outdoor Alarm System
Real-time Alarm Monitoring Software

For Perimeter Protection
Short Range Photoelectric Detector
SL-100/200TNR-GEN

For Window/ Shutter Protection
Outdoor PIR Detector
BXS-R-GEN / FTN-R-PT-GEN

For Garden / Parking Place And Balcony Protection
Outdoor PIR Detector
VXI-R-GEN

For Corridors/ Rooms Protection
Indoor PIR Detector
RXC-RST-GEN

For Neighbor Notification
Wireless Outdoor Siren
GEN-OSR

For Windows / Backdoors Protection
Wireless Magnetic Door Contact
DOOR CONTACT

Visual Verification (GENIO Advance only)
Indoor PIR Camera
GEN-IDCAM
Outdoor PIR Camera
GEN-ODCAM
 

GENIO Map

GENIO Map, real-time alarm monitoring software, is a simple all-in-one solution to manage the security workflow for alarm monitoring and management for small and medium sized operations such as gated communities, factories, and warehouses.
Alarm Monitoring Software
 

powered by CHeKT

OPTEX Bridge is a universal video communicator which can realize a professional integration of an alarm monitoring and CCTV surveillance system easily keeping expenses at the reasonable level.
 

Fiber-Optic Intrusion Detection System

Using both fiber optic and radar technology, the portfolio of outdoor security sensors by Fiber SenSys provides solutions for all types of perimeters.
 

Access Control Systems

The Access Control System, which was developed by a combination of our unique human tracking technology and access control systems, offers solutions to detect fraudulent tailgating by tracking people with a high degree of accuracy.
Automatic Door Sensors
This sensor is for opening and closing automatic doors. We place user safety first, and provide various types of sensors to suit the areas where they will be attached.
 

Access Control System

This series proposes various levels of action taken in case of tailgating, including “alert/deterrence,” “deterrence/simplified prevention” and “prevention,” according to the security levels customers demand and the situation.

Anti-tailgating system
ACCURANCE OV-102
OV-102S(E)[Camera]
 
OV-102CB(E)[Control box]
 

Anti-tailgating system

Accurance 3D is Anti-Tailgate & Anti-Piggyback sensor system that utilizes Time-of-Flight technology for high security two-door interlocks.

Anti-tailgating system
ACCURANCE-3D
A3001S[Camera]
 
A3001CB[Control box]
 

Reverse detection system

R1002 can recognize a movement flow of plural persons and detects only a person who goes opposite direction through. The system are suitable for applications to catch a suspicious individual an effcient facility management or security.

Reverse detection system
ACCURANCE R1002
R1002S(E)[Camera]
 
R1002CB(E)[Control box]
 

Automatic Door Sensors

This sensor is for opening and closing automatic doors. We place user safety first, and provide various types of sensors to suit the areas where they will be attached.

Combination sensor OAM-DUAL T
OAM-DUAL T is especially designed for applications which require high safety and reliability such as in hospitals, airports, and big shopping malls.
Combination sensor X-ZONE T
X-ZONE T is especially designed for applications which require high safety and reliability such as in hospitals, airports, and big shopping malls.
Active infrared sensor i-oneX T
The extra-wide detection area covers the door opening plus sidelights, providing fast detection for traffic approaching from any angle.
Active infrared sensor OA-FLEX T
OA-FLEX T combines activation and safety functions into one sensor based on the OPTEX full active infrared technology.
Active infrared sensor OA-FLEX T#
Whole presence detection capability OA-FLEX T can use detection area as presence detection area and possible to utilize for various applications.
Active infrared sensor OA-FLEX AIR T
This sensor is designed to detect a hand approaching to a touchless plate as plate as knowing activation device.
Active infrared sensor AIR-SLIDE T
This sensor is designed to detect a hand approaching to a touchless plate as plate as knowing activation device.
Active infrared sensor AIR-SLIDE 2
This sensor is designed to detect a hand approaching to a touchless plate as plate as knowing activation device.
Active infrared sensor OA-FUNXION
New!
OA-FUNXION combines activation and safety functions into one sensor based on the OPTEX full active infrared technology.
Active infrared sensor OA-FUNXION V
New!
OA-FUNXION V combines activation and safety functions into one sensor based on the OPTEX full active infrared technology.
Image-Recognition Sensor VVS-1
Improving the hospitality of automatic doors. OPTEX’s VVS-1 embodies the perfect balance of safety and comfort.
Active infrared sensor OA-AXIS T
The angular settings of the activation area (2 external rows) and safety area (3 internal rows) can be adjusted independently.
Active infrared sensor OA-AXIS I / AXIS II
The angular settings of the activation area (2 external rows) and safety area (3 internal rows) can be adjusted independently.
Active infrared sensor MIRAGE
The Mirage is OPTEX best active infrared recessed sensor for installing in the header or in the ceiling.
Active infrared sensor OA-72C
The OA-72C infrared sensor is specially designed for discreet ceiling installation for activation and safety sensing.
Activation
Microwave sensor OM-105C / 106C
The OM-105C/106C are especially designed to increase comfort on opening all types of automatic doors.
Microwave sensor OM-104C
Highly protective housing (airtight) housing preventing Insects, Dust, and Water drops into the sensor.
Passive infrared sensor OP-08C
The reliable OP-08C passive infrared door sensor features a compact housing suitable for recessed mounting.
Safety
Active infrared sensor OS-12C T
An active infrared safety beam system compatible with all types of automatic doors. Designed for easy installation.
Active infrared sensor OS-12C
An active infrared safety beam system compatible with all types of automatic doors. Designed for easy installation.
Side Screen Safety
Active infrared sensor OA-PRESENCE TN
The OA-PRESENCE TN can be used as a side screen safety sensor.

Swing Door Sensors
Activation&Safety
Active infrared sensor ELITE PRO series
New!
ELITE PRO series is innovative safety sensor system for Full and Low Energy Swing Doors.
Active infrared sensor ELITE T
The Pro-Swing ELITE T is designed to detect moving and stationary people, staying active even during door motion.
Activation
Microwave sensor OM-105C / 106C
The OM-105C/106C are especially designed to increase comfort on opening all types of automatic doors.
Passive infrared sensor OP-08C
The reliable OP-08C passive infrared door sensor features a compact housing suitable for recessed mounting.
Safety
Active infrared sensor OA-EDGE T
The wide detection area of each module secures a high level of safety around the door and will prevent the door leaf fromhitting an object or person near the door.
Active infrared sensor OA-EDGE1/EDGE2
The wide detection area of each module secures a high level of safety around the door and will prevent the door leaf fromhitting an object or person near the door.
Active infrared sensor PREMIER T
The Pro-Swing PREMIER T detects moving and stationary people in the door swing path for safety and style.
Active infrared sensor OS-12C T
An active infrared safety beam system compatible with all types of automatic doors. Designed for easy installation.
Active infrared sensor OS-12C
An active infrared safety beam system compatible with all types of automatic doors. Designed for easy installation.
 

Industrial Door Sensors 

This sensor is for opening and closing shutters. We offer various types of optimal sensors that can make production sites more efficient.

Activation&Safety
Combination sensor OAM-EXPLORER
The OAM-EXPLORER is an infrared and microwave combination sensor designed for industrial door applications.
Combination sensor OAM-EXPLORER AS
The OAM-EXPLORER AS is an infrared and microwave combination sensor designed for industrial door applications.
Combination sensor OAM-EXPLORER US
The OAM-EXPLORER US is an infrared and microwave combination sensor designed for industrial door applications.
Active infrared sensor OA-6500S T
The OPTEX OA-6500 is based on active infrared technique, combining activation and safety into one sensor.
Active infrared sensor OA-6000 series
OPTEX OA-6000 detection area adjusts 160 vertically and 360 horizontally, detecting from high mounting positions up to 6 meters
Active infrared sensor OA-4500S(E)
The OPTEX OA-4500 is based on active infrared technique, combining activation and safety into one sensor.
Active infrared sensor OA-203C
The OA-203C is optimal for safety and activation on all automatic doors. Easy settings and a slim profile.
Activation
Passive infrared sensor OP-08C
The reliable OP-08C passive infrared door sensor features a compact housing suitable for recessed mounting.
Microwave sensor OM-105C / 106C
The OM-105C/106C are especially designed to increase comfort on opening all types of automatic doors.
Safety
Active infrared sensor OS-12C
An active infrared safety beam system compatible with all types of automatic doors. Designed for easy installation.
Active infrared sensor OS-12C T
An active infrared safety beam system compatible with all types of automatic doors. Designed for easy installation.
 

Environmental Sensors

We developed the world's first automatic transparency measurement system. This technology can accurately measure the turbidity and color of the liquid continuously. Our sensors support safety monitoring in the water environment manufacturing process.
 

Transmitter

New transmitter which provide excellent usability and operability.
Our sensors can be connected multiply.

Universal Transmitter SC Series
SC-U1(E)[Parts No. 05324]
New transmitter which provide excellent usability and operability.
Our sensors can be connected multiply.

Our sensor line-up that can be connected
Turbidity Checker TC-D Series
It is compact, requires no complicated setup or maintenance, and allows for continuous monitoring. Measurement range: 0 - 3000 FTU.
Turbidity Checker (Middle Range) TSC-D Series
High cost performance model with separate transmitter and detector.
Turbidity Checker (Ultra Low Range)  TC Series
90-degree detector.
Measure turbidity to four decimal places.
It enables you to monitor the quality of water which is good to drink or not.
SS Checker (High Range) TS-D Series
Pursuing a balance between required functions and cost, and delivering a high level of cost performance.
SS Checker (Middle Range) TS-D Series
Measurement of SS and permeability can be switched.
*Simultaneous measurement is not possible.
Compact size of Φ32 mm. Easy maintenance with wiper cleaning method.
We have achieved maintenance-free compact size.
Optical Dissolved Oxygen Sensor DOS Series
Easy Installation, Simple Operation. Maintenance long-term unnecessary.
pH Sensor SE-pH-D Series
Assembled sensor with Digital output for pH.
Easy to replace the electrode.
No need of any tool when replacing.
ORP Sensor SE-ORP-D Series
Assembled sensor with Digital output for ORP.
Easy to replace the electrode.
No need of any tool when replacing.
Conductivity Sensor SE-Cond-D Series
Assembled sensor with Digital output for Conductivity
 

Turbidity

Measures the degree of turbidity of drinking water and sewage treatment plants, rivers and factory drainage.

Turbidity Checker

For Universal Transmitter Type

Turbidity Checker TC-D Series

It is compact, requires no complicated setup or maintenance, and allows for continuous monitoring. Measurement range: 0 - 3000 FTU.

TC-3000-D[Parts No. 05327]
 
TC-3000SP-D[Parts No. 05328][for sea water]
It is compact, requires no complicated setup or maintenance, and allows for continuous monitoring.
Measurement range: 0 - 3000 FTU.
 

Turbidity Checker (Middle Range) TSC-D Series

High cost performance model with separate transmitter and detector.

Turbidity Checker (Middle Range) TSC-D Series
TSC-10-D[Parts No. A10005337]
High cost performance model with separate transmitter and detector.

Standalone Type

Turbidity Checker (Ultra Low Range)  TC Series

90-degree detector.
Measure turbidity to four decimal places.
It enables you to monitor the quality of water which is good to drink or not.

Turbidity Checker (Ultra Low Range)  TC Series
TC-Mi[Display][Parts No. 05297]
90-degree detector.
Measure turbidity to four decimal places.
It enables you to monitor the quality of water which is good to drink or not.

Analog output type

Turbidity Checker TC Series

It is a compact turbidity meter that can be used as a sensor. Continuous monitoring with no complicated set up and maintenance.

Turbidity Checker TC Series
TC-100[Checker][Parts No. 05035]
 
TC-500[Checker][Parts No. 05036]
 
TC-3000[Checker][Parts No. 05049]
Make turbidity check easier and more compact. And realize significant cost savings.
 

SS

Measure Suspended Solids included in factory drainage etc.

SS Checker
For Universal Transmitter Type

SS Checker (Middle Range) TS-D Series

Measurement of SS and permeability can be switched.
*Simultaneous measurement is not possible.
Compact size of Φ32 mm. Easy maintenance with wiper cleaning method.
We have achieved maintenance-free compact size.

SS Checker (Middle Range) TS-D Series
TS-1000-D[Parts No. 05325]
 
TS-1000SP-D[Parts No. 05326][for sea water]
Measure SS and permeability with a single unit.
Compact size of Φ32 mm. Easy maintenance with wiper cleaning method.
We have achieved maintenance-free compact size.
 

SS Checker (High Range) TS-D Series

Pursuing a balance between required functions and cost, and delivering a high level of cost performance.

SS Checker (High Range) TS-D Series
TS-Mx-D[Parts No. A10005338]
Pursuing a balance between required functions and cost, and delivering a high level of cost performance.


Analog output type

SS Checker (Middle Range) TCS Series

Compact size of Φ32 mm. Easy maintenance with wiper cleaning method.
Advanced version of high performance SS sensor. We have achieved maintenance-free compact size.

SS Checker (Middle Range) TCS Series
TCS-1000(E)[Checker][Parts No. 05057]
Compact size of Φ32 mm. Easy maintenance with wiper cleaning method.
Advanced version of high performance SS sensor. We have achieved maintenance-free compact size.

 

Oxygen

Measure the oxygen dissolved in the water.

Optical Dissolved Oxygen Sensor DOS Series
DOS-20[Checker][Parts No. 05160]
Easy Installation, Simple Operation. Maintenance long-term unnecessary.
 

Cond

Measure the electrical conductivity of river water and aqueous solutions used in industry.

Conductivity Sensor SE-Cond-D Series
SE-Cond-D[Parts No. 05329]
Assembled sensor with Digital output for Conductivity.
 

pH

Measure the liquidity (degree of acidity or alkalinity) of a solution.

pH Sensor SE-pH-D Series
SE-pH-D[Parts No. 05330]
Assembled sensor with Digital output for pH.

 

ORP

Measurement of ORP (oxidation-reduction potential) of sewage treatment and plating process.

ORP Sensor SE-ORP-D Series
SE-ORP-D[Parts No. 05331]
Assembled sensor with Digital output for ORP.

 

Vehicle Detection Sensors and Systems

Optex's vehicle detection sensor prevents accidents and troubles in the parking lot, and guides the vehicle smoothly to realize efficient operation management and safety in the parking lot.

Applications

Gate

OPTEX Virtual Loop sensors can be used for gate activation and vehicle protection both.

Vehicle Detection Sensor
VIRTUAL LOOP OVS-02GT
Vehicle Detection Sensor
VIRTUAL LOOP OVS-01GT
Vehicle Detection Sensor
OVS-50TNR
 

Parking

Occupancy
OPTEX has a couple of solution for parking occupancy system.

Vehicle Detection Sensor
VIRTUAL LOOP OVS-01CL
Available in Japanese market only
Vehicle Detection Sensor
VIRTUAL LOOP OVS-01CLB
Available in Japanese market only
 

Car Counting

OPTEX Virtual Loop sensors can count cars, ignore pedestrian and be replaced from ground loops.

Vehicle Detection Sensor
VIRTUAL LOOP OVS-01CC
Vehicle Detection Sensor
OVS-50TNR
 

Car Warning System

Vehicle warning system for pedestrian on walking path.When vehicle comes out from parking facility, the system activates rotating light and sounder.

Vehicle Detection Sensor
VIRTUAL LOOP OVS-01GT
Vehicle Detection Sensor
VIRTUAL LOOP OVS-01TCP
Available in Japanese market only
 

License Plate Recognition

OPTEX Virtual Loop sensors can increase accuracy for LPR (License Plate Recognition) system by using trigger from it.

Vehicle Detection Sensor
VIRTUAL LOOP OVS-02GT
Vehicle Detection Sensor
VIRTUAL LOOP OVS-01GT

LED lighting for LPR system
A lot of LPR system use infrared camera to have some high contrast image in order to analyze the captured image accurately. In this case, it is necessary to use infrared illumination instead of visible light.

LED lighting system from Raytec which is one of OPTEX group subsidiaries gives high performance. It is possible to adjust the FOV of lighting by changing a lens over the lighting and 5 level of light intensity by remote.

LED illuminators for Video Surveillance
Raytec LED illuminators are designed to help any video surveillance system deliver the very best performance at night. UK designed and manufactured, Raytec illuminators have been installed world-wide from the Arctic circle to the Jungles of Borneo.

 

Truck Occupancy System

OPTEX Virtual Loop sensors can be used on pole or ceiling instead of ground loops for truck guiding system.

Vehicle Detection Sensor
VIRTUAL LOOP OVS-01GT

Vehicle Detectors

Microwave sensors

FMCW method Microwave sensor enables to detect vehicle approach and presense.

Vehicle Detection Sensor
VIRTUAL LOOP OVS-02GT
Vehicle Detection Sensor
VIRTUAL LOOP OVS-01GT
Vehicle Detection Sensor
VIRTUAL LOOP OVS-01CC
Vehicle Detection Sensor
VIRTUAL LOOP OVS-01TCP
Available in Japanese market only
Vehicle Detection Sensor
VIRTUAL LOOP OVS-01CL
Available in Japanese market only
Vehicle Detection Sensor
VIRTUAL LOOP OVS-01CLB
Available in Japanese market only
 

Infrared photo beam

Point to point photo beam which is designed for reliable vehicle detection.

Infrared photo beam
Vehicle Detection Sensor
OVS-50TNR
 

Wireless Magnetometer

Measuring difference of earth magnetic field enable to detect vehicle presence.

Wireless Magnetometer
ViiK Parking Occupancy system
Available in Japanese market only

ViiK Parking Occupancy system
OPS-01SS[Wireless vehicle sensor]
 
OPS-01GW[Gateway]
 
OPS-01MF[Repeater]
Available in Japanese market only

Options for Vehicle Detection Sensors
Triangle bracket
Anti-Vandal Cage 
Mini-post
 

Occupancy Sensors & Switches

In order to operate the lighting and air conditioning equipment in the facility more effectively, it is automatically controlled by the presence detection sensor. As building automation advances, it will provide a comfortable environment and energy savings.
 

CPI series

Optimization of office space by assessing the usage of conference rooms and free spaces
- Waterproof IPx5
- Disturbance immunity
- Rigid body　

CPI series
CPI-E
 
CPI-E(WH)
 
CPI-U
 
CPI-U(WH)
Enocean ready and applicable to light and HVAC controls.
- Waterproof IPx5
- Disturbance immunity
- Rigid body　

Wireless rocker switch

CSW series

An innovative switch that does not require batteries
- Waterproof IPx5
- Disturbance immunity

CSW-1-E[Single][Square type]
 
CSW-2-E[Double][Square type]
 
CSW-1-U[Single][Rectangle type]
 
CSW-2-U[Double][Rectangle type]
An innovative switch that does not require batteries
- Waterproof IPx5
- Disturbance immunity
 

IoT Devices

IoT wireless unit can be easily IoT from a wide variety of contact output devices that are installed in existing facilities.

IoT wireless unit

Dry Contact Converter

This is sold only in Japan.
You can easily IoT the various contact output devices that are installed in existing facilities.
Prototype: Japan limited edition

Dry Contact Converter
OWU-101S[Battery type]
 
OWU-102S[External power supply type]
You can easily IoT the various contact output devices that are installed in existing facilities.

Sensor input format
- Contact signal
- Pulse signal

*This is sold only in Japan.
 

Analog Converter

Prototype: Japan limited edition
Can connect analog 4-20 mA output of various sensors and measuring instruments.
Realizes equipment remote monitoring of various facilities such as buildings and factories.

OWU-201S（Prototype: Japan limited edition）
Can connect analog 4–20 mA output of various sensors and measuring instruments.
Realizes equipment remote monitoring of various facilities such as buildings and factories.

Sensor input format
- Analog 4–20 mA signal

*Japan limited edition
 

LED illuminators for Video Surveillance 

Raytec LED illuminators are designed to help any video surveillance system deliver the very best performance at night. UK designed and manufactured, Raytec illuminators have been installed world-wide from the Arctic circle to the Jungles of Borneo.


Recess Plank
SPARTAN SPX Recess Luminaire, Plank, Zone 1/21
About SPARTAN Recess Plank Zone 1
Sector
Hazardous
Certification
ATEX, IECEx and UKEX
Classification
Zone 1 & 21
The brand new SPARTAN Recess range features a unique modular design, created to be light weight, with access from below and above the ceiling for ease of installation and maintenance. All SPARTAN luminaires are designed and manufactured in the UK and come with an industry-leading 5-year warranty.


Recess Modular
SPARTAN SPX Recess Luminaire, Modular, Zone 1/21
About SPARTAN Recess Modular Zone 1
Sector
Hazardous
Certification
ATEX, IECEx and UKEX
Classification
Zone 1 & 21
The brand new SPARTAN Recess range features a unique modular design, created to be light weight, with access from below and above the ceiling for ease of installation and maintenance. All SPARTAN luminaires are designed and manufactured in the UK and come with an industry-leading 5-year warranty.


Recess Plank
SPARTAN SPZ Recess Luminaire, Plank, Zone 2/22
About SPARTAN Recess Plank Zone 2
Sector
Hazardous
Certification
ATEX, IECEx and UKEX
Classification
Zone 2 & 22
The brand new SPARTAN Recess range features a unique modular design, created to be light weight, with access from below and above the ceiling for ease of installation and maintenance. All SPARTAN luminaires are designed and manufactured in the UK and come with an industry-leading 5-year warranty.


Recess Modular
SPARTAN SPZ Recess Luminaire, Modular, Zone 2/22
About SPARTAN Recess Modular Zone 2
Sector
Hazardous
Certification
ATEX, IECEx and UKEX
Classification
Zone 2 & 22
The brand new SPARTAN Recess range features a unique modular design, created to be light weight, with access from below and above the ceiling for ease of installation and maintenance. All SPARTAN luminaires are designed and manufactured in the UK and come with an industry-leading 5-year warranty.


Mid Power Bay
SPARTAN Mid Power Bay, Zone 1/21, 5,000 - 15,000lm
About SPARTAN Mid Power Bay MPBY Zone 1
Sector
Hazardous
Certification
ATEX, IECEx and UKEX
Classification
Zone 1 & 21
NEW Intelligent Emergency variants! Available in 90-minute and 180-minute duration variants, as a standard (other options available). 
The SPARTAN Mid Power Bay range is designed to illuminate large, open spaces within hazardous area environments. Available with a range of different outputs from 5,000 to 15,000 lumens, the Mid Power Bay uses Raytec’s field-proven, long-life LED technology to ensure a lifetime of 10 years+. All SPARTAN luminaires come with an industry-leading 5-year warranty.


Mid Power Flood
SPARTAN Mid Power Flood, Zone 1/21, 5,000lm - 15,000lm
About SPARTAN Mid Power Flood MPFL Zone 1
Sector
Hazardous
Certification
ATEX, IECEx and UKEX
Classification
Zone 1 & 21
NEW Intelligent Emergency variants! Available in 90-minute and 180-minute duration variants, as a standard (other options available). 
The SPARTAN Mid Power Flood range is an ATEX LED floodlight designed to illuminate large, open spaces within hazardous area environments. Available with a range of different outputs from 5,000 to 15,000 lumens, the Mid Power Flood uses Raytec’s field-proven, long-life LED technology to ensure a lifetime of 10 years+. All SPARTAN luminaires come with an industry-leading 5-year warranty.


Linear WL84 High Output
SPARTAN Linear WL84, High Output, Zone 2/22, 7,048lm
About SPARTAN Linear WL84 High Output Zone 2/22
Sector
Hazardous
Certification
ATEX, IECEx and UKEX
Classification
Zone 2 & 22
The SPARTAN Linear WL84 High Output Zone 2/22 range is an ideal solution for new hazardous area installations, offering twice the lumen output than the standard SPARTAN Linear whilst retaining the same luminaire look and feel. The increase in power means fewer luminaires are required across an installation when compared to traditional Linear fittings, while SPARTAN Linear High Output can also be utilised as a cost-effective alternative to low bay luminaires.
SPARTAN Linear has been designed to provide extreme levels of durability and features a unique modular design which makes maintenance quick and easy. All SPARTAN luminaires are designed and manufactured in the UK and come with an industry-leading 5-year warranty.
 

Image Sharpening

Our image sharpening technology contributes to the improvement of on-site surveillance, by sharpening video images blurred by fog, haze or low illuminance.

FV-3011HS
Image clarifying unit compatible with HD-SDI signal. Adjustable intensity of various functions.
FV-3010HS
Image clarifying unit compatible with HD-SDI signal. Corresponding to 19inch EIA rack.
FF-100HM
Image clarifying unit compatible with HDMI like signals.
ZIPF005
Contrast improvement IP for YUV input compatible FPGA.
 

People Counting Systems

Counting the number of people entering a shop, the average time they stay there and other such data underlies the marketing of stores and commercial facilities. We compile this information on customer numbers into a database, and use it to offer effective solutions for store management.

Highly accurate people counting system
People Counting System, also known as Visitor Counting System or Customer Counting System.

Our people counting system uses proprietary high-accuracy sensors installed in ceilings at entrances and in walkways to automatically count the number of people passing through in real time.

The sensor image is processed within the device and the system does not store any images or data related to personal information. Only the count data (number and time only) is output or stored, so privacy is fully protected.

In addition to measuring the number of visitors, it is also possible to quantify the number of people in the facility (occupants) and the average length of stay (average dwell time).

Patented People Counting Technology
＊The images are not stored on the sensor

More than 95% Accuracy
Explore our robust people counting sensors and reporting software, designed for unmatched stability and versatility.

Our advanced people counting technology delivers more than 95% accuracy, even in challenging conditions such as crowded environments.

Discover how our reliable, adaptable solutions can meet the specific needs of any business, improving both operational efficiency and customer insight.

The Importance of High Accuracy
Our commitment to accuracy ensures that every decision you make is informed and strategic.

People counting sensors are essential tools for modern businesses, providing accurate data on foot traffic, occupancy, and customer behavior.

High accuracy in people counting is critical to making informed decisions.

Our sensor uses advanced technologies to ensure accurate people counting, enabling businesses to optimize operations and improve customer experiences.

People Counting Sensor

Product Lineup
People Counting Sensor
PALOSSIE AIO

PALOSSIE AIO VC-1020
Surface Mount Model
FTP(S)
HTTP(S)
MQTT(S)
PALOSSIE AIO VC-1050
Recess Mount model
FTP(S)
HTTP(S)
MQTT(S)
AIO CX1
Advanced Fish-eye 360 Model
HTTP(S)
MQTT(S)
Web-API


Accurate People Counting Sensors
FTP(S)
HTTP(S)
MQTT(S)

People Counting Camera
AIO CX1
360 degree Fish-eye People Counting Camera
HTTP(S)
MQTT(S)
Web-API

PALOSSIE AIO VC-1020
Suface Mount Model
FTP(S)
HTTP(S)
MQTT(S)
PALOSSIE AIO VC-1050
Recess Mount model
FTP(S)
HTTP(S)
MQTT(S)
AIO-CX1
Advanced Fish-eye 360 Model
HTTP(S)
MQTT(S)
Web-API

Options
Real-time Occupancy Alert