Sleeve bushing or ball bearing versions
12-bit resolution and resolution field programmable from 2 to 4,096 codes per revolution (3,600 factory default)
Full 360-degree range, 7 msec update time
Low power drain of 18.5 mA max., and 2.5 mA in sleep mode ...
A2K
ABSOLUTE OPTICAL ENCODER: KIT VERSION
Installs onto shafts up to 10mm diameter
12-bit resolution, and resolution field programmable from 2 to 4,096 codes per revolution (3,600 factory default)
Full 360 degrees range, 7 msec update time
Low power drain of 18.5 mA max., and 2.5 mA in sleep mode ...
DISK-1
1 IN. TRANSMISSIVE ROTARY ENCODER DISK
1 in. outside diameter
Mylar film construction
32 to 5,000 CPR
Index track option ...
DISK-2
2 IN. TRANSMISSIVE ROTARY ENCODER DISK
2 in. outside diameter
Mylar film construction
64 to 10,000 CPR
Index track option
E2
OPTICAL KIT ENCODER
Quick, simple assembly, and disassembly
Rugged screw-together housing
Accepts .010 in. axial shaft play
32 to 5,000 cycles per revolution (CPR) ...
E3
OPTICAL KIT ENCODER
Quick, simple assembly, and disassembly
Rugged screw-together housing
Accepts .010 in. axial shaft play
Small size ...
E4T
MINIATURE OPTICAL KIT ENCODER
Push-on hub - spring loaded collet design
Minimum shaft length of .275 in.
Fits shaft diameters of .079 in. to .250 in.
100 to 1,000 cycles per revolution (CPR) ...
E5
OPTICAL KIT ENCODER
Quick, simple assembly, and disassembly
Rugged screw-together housing
Positive latching connector
Accepts .010 in. axial shaft play ...
E6
OPTICAL KIT ENCODER
Quick, simple assembly, and disassembly
Rugged screw-together housing
Positive latching connector
Accepts .010 in. axial shaft play ...
E8
TMINIATURE OPTICAL KIT ENCODER
Push-on hub - spring loaded collet design
Minimum shaft length of .295 in.
Fits shaft diameters of .118 in. to .375 in.
180 to 720 cycles per revolution (CPR) ...
E16
MICRO OPTICAL KIT ENCODER
Push-on hub - spring loaded collet design
Fits shaft diameters of 1.5mm (0.059 in.) and 2mm (0.079 in.)
250/256 to 4,000/4096 cycles per revolution (CPR)
1,000/1024 to 16000/16384 pulses per revolution (PPR) ...
EC35
OPTICAL COMMUTATION KIT ENCODER
Now 500 to 60,000 CPR
Quick, simple assembly
A/B/Z differential outputs
U/V/W commutation outputs (differential or open-collector) ...
EM1
TRANSMISSIVE OPTICAL ENCODER MODULE
Two-channel quadrature with optional index
Improved replacement for HEDS-9000 Series
Single 5 VDC supply
Resolutions from 32 to 2,500 CPR ...
EM2
TRANSMISSIVE OPTICAL ENCODER MODULE
Two-channel quadrature with index
High-resolution version of EM1
Single 5V supply
Rotary versions up to 10,000 CPR ...
H1
BALL BEARING OPTICAL SHAFT ENCODER
Ball-bearing option tracks to 10,000 RPM
2-channel quadrature, TTL squarewave outputs
3rd channel index option available on some resolutions
32 to 5,000 cycles per revolution (CPR) ...
H3
BALL BEARING OPTICAL SHAFT ENCODER
Ball-bearing option tracks to 10,000 RPM
2-channel quadrature, TTL squarewave outputs
3rd channel index option available on some resolutions
64 to 10,000 cycles per revolution (CPR) ...
H5
BALL BEARING OPTICAL SHAFT ENCODER
Ball-bearing option tracks to 10,000 RPM
2-channel quadrature, TTL squarewave outputs
3rd channel index option available on some resolutions
32 to 5,000 cycles per revolution (CPR) ...
H6
BALL BEARING OPTICAL SHAFT ENCODER
Ball-bearing option tracks to 10,000 RPM
2-channel quadrature, TTL squarewave outputs
3rd channel index option available on some resolutions
64 to 10,000 cycles per revolution (CPR) ...
Hollow bore (hollow shaft/thru-bore) bearing design
Rugged anodized aluminum housing
Industrial duty 6,805 series bearings
Heavy-duty ball bearings track up to 6,000 RPM ...
HD25
INDUSTRIAL RUGGED METAL OPTICAL ENCODER
NEMA size 25 package
Anodized aluminum housing
64 to 10,000 cycles per revolution (CPR)
256 to 40,000 pulses per revolution (PPR) ...
HD25A
ABSOLUTE INDUSTRIAL RUGGED METAL OPTICAL ENCODER
NEMA size 25 package
Anodized milled aluminum housing with O-ring housing seal
3/8 in. diameter shaft
Up to 15 devices on a single 6-pin telephone-type cable ...
HUBDISK-1
1 IN. TRANSMISSIVE ROTARY DISK
1 in. disk with hub
32 to 5,000 CPR (128 to 20,000 PPR)
HUBDISK-22 IN. TRANSMISSIVE ROTARY DISK
MORE HUBDISK-2 DETAILS
2 in. outside diameter
64 to 10,000 CPR (256 to 40,000 PPR)
LIN
TRANSMISSIVE LINEAR ENCODER STRIP
Up to 35.5 in. long
Up to 2000 LPI (when paired with the EM2)
Index track option
M3K
MINIATURE MAGNETIC INCREMENTAL KIT ENCODER
Available in incremental and incremental/absolute configurations
Push-on hub spring loaded collet design
Motor shaft length of 0.500 in. or 0.390 in.
Fits shaft diameters from 3mm to 0.250 in. ...
MA3
MINIATURE ABSOLUTE MAGNETIC SHAFT ENCODER
Miniature size (0.48 in. diameter)
Non-contacting magnetic single chip sensing technology
-40C to 125C operating temperature range
10-bit Analog output - 2.6 kHz sampling rate ...
MAE3
ABSOLUTE MAGNETIC KIT ENCODER
Quick, simple assembly, and disassembly
-40C to +125C operating temperature
ccepts +/- .025 in. axial shaft play
Mounts to 0.750 in., 1.280 in. and 1.812 in. bolt circles ...
S1
OPTICAL SHAFT ENCODER
Ball-bearing option tracks to 10,000 RPM
2-channel quadrature, TTL squarewave outputs
3rd channel index option available on some resolutions
32 to 5,000 cycles per revolution (CPR) ...
S2
OPTICAL SHAFT ENCODER
2-channel quadrature, TTL square wave outputs
3rd channel index option
64 to 10,000 CPR (256 to 40,000 PPR)
Ball-bearing option tracks to 10,000 RPM ...
S4T
MINIATURE OPTICAL SHAFT ENCODER
Small size
Low cost
High retention snap-in polarized connector
-20C to 100C operating temperature ...
S5
OPTICAL SHAFT ENCODER
Small size
32 to 5,000 CPR (128 to 20,000 PPR)
Optional differential/line-driver output
Positive latching connector ...
S6
OPTICAL SHAFT ENCODER
Small size
64 to 10,000 CPR (256 to 40,000 PPR)
Optional differential / line-driver output
Positive latching connector ...
S16
MICRO OPTICAL SHAFT ENCODER
NEW FOR '22!
Small size (16mm OD)
Low Cost
Snap-in polarized connector ...
Inclinometers
A2T
ABSOLUTE OPTICAL INCLINOMETER
12-bit resolution field programmable from 2 to 4,096 codes per revolution (3,600 factory default)
Full 360° range, 7 msec update time
Low power drain of 18.5 mA max., and 2.5 mA in sleep mode
Field programmable parameters such as setting zero position point (free demo software provided) ...
T7
NETWORKED ABSOLUTE INCLINOMETER
Full 360° operation
± 0.1 degree accuracy
IP68 rated
RS232 or RS485 interface ...
Accessories
CA-C5-SH-C5
5-PIN STANDARD CONNECTOR / 5-PIN STANDARD CONNECTOR, SHIELDED CABLE
5-pin female standard (friction, not latching) right-angle connectors on both ends of a 5-conductor round shielded 24 AWG cable....
CA-C5-SH-FC5
5-PIN STANDARD CONNECTOR / 5-PIN LATCHING CONNECTOR, SHIELDED CABLE
A 5-pin female standard (friction, not latching) connector connected to a 5-pin female polarized latching connector via a 5-conductor round shielded 24 AWG cable....
CA-C5-SH-NC
5-PIN STANDARD CONNECTOR / UNTERMINATED, SHIELDED CABLE
5-pin female standard (friction, not latching) right-angle connector on one end of a 5-conductor round shielded 24 AWG cable; the other end is unterminated. This cable is...
CA-C5-W4-NC
5-PIN STANDARD CONNECTOR / UNTERMINATED, 4-WIRE DISCRETE CABLE
5-pin female standard (friction, not latching) right-angle connector on one end of four individual discrete 22 AWG wires. Please note: There is no wire at pin 2; this cable...
CA-C5-W5-NC
5-PIN STANDARD CONNECTOR / UNTERMINATED, 5-WIRE DISCRETE CABLE
A 5-pin female standard (friction, not latching) right-angle connector on one end of five individual discrete 22 AWG wires....
CA-C10-F-C10
10-PIN IDC CONNECTOR / 10-PIN IDC CONNECTOR, FLAT CABLE
10-pin insulation displacement female connectors (IDC) on both ends of a 10-wire flat 28 AWG ribbon cable. This cable is primarily used with Avago/Agilent direct...
CA-C10L-SH-NC
10-PIN STANDARD CONNECTOR / UNTERMINATED, SHIELDED CABLE (AVAGO PIN-OUT)
A 10-pin female standard connector on one end of an 8-conductor round shielded twisted pair 24 AWG cable. This cable is primarily used with Avago/Agilent direct replacements...
CA-C10-SH-C10
10-PIN STANDARD CONNECTOR / 10-PIN STANDARD CONNECTOR, SHIELDED CABLE
10-pin female standard (friction, not latching) connectors on both ends of an 8-conductor round shielded twisted pair 24 AWG cable....
CA-C10-SH-NC
10-PIN STANDARD CONNECTOR / UNTERMINATED, SHIELDED CABLE
The CA-C10-SH-NC cable has a 10-pin female standard (non-latching) connector on one end of an 8-conductor round shielded twisted pair 24 AWG cable; the other end is...
CA-CFR-PS-DB9P
T7-232 POWER AND SERIAL COMMUNICATION CABLE
This cable connects the 5-pin J1 connector of a T7 Networked Absolute Inclinometer (RS232 interface) to a standard PC's DB9 RS-232 serial COM port. The power connector is used...
CA-CFR-PS-NC
T7 PUR SHIELDED CABLE WITH LEADS
This PUR (polyurethane) shielded cable has a T7 right angle connector at one end and unterminated wires at the other end. This cable is used with the RS232 or RS485 versions...
CA-CFTR-PS-NC
T7 PUR SHIELDED CABLE WITH LEADS AND TERMINATING RESISTOR
This PUR (polyurethane) shielded cable has a T7 right angle connector at one end and unterminated wires at the other end. The cable has a built-in 120-ohm terminating resistor...
CA-CM-PS-CFR
T7 PUR SHIELDED CABLE
This shielded PUR (polyurethane) cable has a T7 straight connector and a right-angle connector at the other end. You can use this cable with the CON-CAN-MFF splitter to...
CA-CM-PS-CFTR
T7 PUR SHIELDED CABLE WITH TERMINATING RESISTOR
This shielded PUR (polyurethane) cable has a T7 straight connector at one end and a right-angle connector at the other end. The cable has a built-in 120-ohm terminating...
CA-DF5-SH-NC
5-PIN DF52 CONNECTOR / UNTERMINATED, SHIELDED CABLE
A 5-pin Hirose DF52 series, 0.8mm pitch plug connector on one end of a 5-conductor round shielded 30 AWG cable. This cable has a temperature range of -40C to 105C....
CA-E15-SH-NC
15-PIN CONNECTOR / UNTERMINATED, SHIELDED CABLE
A 15-pin standard cable, 28 AWG.
CA-FC5-SH-FC5
5-PIN LATCHING CONNECTOR / 5-PIN LATCHING CONNECTOR, SHIELDED CABLE
5-pin female polarized latching connector on both ends of a 5-conductor round shielded 24 AWG cable....
CA-FC5-SH-LC5
5-PIN LATCHING CONNECTOR / 5-PIN LOCKING CONNECTOR, SHIELDED CABLE
A 5-pin female polarized latching connector connected to a 5-pin female locking connector via a 5-conductor round shielded 24 AWG cable. The locking connector is typically...
CA-FC5-SH-MIC3
5-PIN LATCHING CONNECTOR / 3-PIN MICRO CONNECTOR, SHIELDED CABLE
This cable consists of a 5-pin latching connector on one end of a shielded cable and a 3-pin micro connector on the other end. This cable is used to connect the PWM output...
CA-FC5-SH-MIC4
5-PIN LATCHING CONNECTOR / 4-PIN MICRO CONNECTOR, SHIELDED CABLE
This cable consists of a 5-pin latching connector on one end of a shielded cable and a 4-pin micro-connector on the other end. This cable is used with several different...
CA-FC5-SH-NC
5-PIN LATCHING CONNECTOR / UNTERMINATED, SHIELDED CABLE
A 5-pin female polarized latching connector on one end of a 5-conductor round shielded 24 AWG cable....
CA-FC5-SH-RC7
5-PIN LATCHING CONNECTOR / 7-PIN MIL-C-5015 CONNECTOR, SHIELDED CABLE
This shielded cable connects to US Digital's HD25 Industrial Rugged Metal Optical Encoder via a circular 7-pin screw-on connector, and it has a 5-pin latching connector on the...
CA-FC5-W4-NC
5-PIN LATCHING CONNECTOR / UNTERMINATED, 4-WIRE DISCRETE CABLE
The CA-FC5-W4-NC discrete wire encoder cable has a 5-pin female polarized latching connector on one end of four individual discrete 22 AWG wires; the other end is...
CA-FC5-W5-NC
5-PIN LATCHING CONNECTOR / UNTERMINATED, 5-WIRE DISCRETE CABLE
A 5-pin female polarized latching connector on one end of five individual discrete 22 AWG wires....
CA-FC10L-SH-FC10L
10-PIN LATCHING CONNECTOR / 10-PIN LATCHING CONNECTOR, SHIELDED CABLE (AVAGO PIN-OUT)
10-pin female polarized latching connectors on both ends with an 8-conductor round shielded twisted pair 24 AWG cable. This cable is primarily used with Avago/Agilent direct...
CA-FC10L-SH-NC
10-PIN LATCHING CONNECTOR / UNTERMINATED, SHIELDED CABLE (AVAGO PIN-OUT)
A 10-pin female polarized latching connector on one end of an 8-conductor round shielded twisted pair 24 AWG cable. This cable is primarily used with Avago/Agilent direct...
CA-FC10P-SH-NC
10-PIN LATCHING CONNECTOR / UNTERMINATED, SHIELDED CABLE (QSB-M PIN-OUT)
A 10-pin female polarized latching connector on one end of a 10-conductor round shielded twisted pair 24 AWG cable. Please note: This cable is intended for use with the...
CA-FC10-SH-FC10
10-PIN LATCHING CONNECTOR / 10-PIN LATCHING CONNECTOR, SHIELDED CABLE
10-pin female latching connectors on both ends of an 8-conductor round shielded twisted pair 24 AWG cable....
CA-FC10-SH-NC
10-PIN LATCHING CONNECTOR / UNTERMINATED, SHIELDED CABLE
A 10-pin female latching connector on one end of an 8-conductor round shielded twisted pair 24 AWG cable....
CA-FC10-W8-NC
10-PIN LATCHING CONNECTOR / UNTERMINATED, 8-WIRE DISCRETE CABLE
A 10-pin female polarized latching connector on one end of eight individual discrete 22 AWG wires....
CA-LC5-SH-LC5
5-PIN LOCKING CONNECTOR / 5-PIN LOCKING CONNECTOR, SHIELDED CABLE
5-pin female locking connectors on both ends of a 5-conductor round shielded 24 AWG cable....
CA-LC5-SH-NC
5-PIN LOCKING CONNECTOR / UNTERMINATED, SHIELDED CABLE
A 5-pin female locking connector on one end of a 5-conductor round shielded 24 AWG cable....
CA-LC5-W4-NC
5-PIN LOCKING CONNECTOR / UNTERMINATED, 4-WIRE DISCRETE CABLE
A 5-pin female locking connector on one end of four individual discrete 22 AWG wires....
CA-LC5-W5-NC
5-PIN LOCKING CONNECTOR / UNTERMINATED, 5-WIRE DISCRETE CABLE
A 5-pin locking connector on one end of five individual discrete 22 AWG wires.
CA-MD3
USB TO RS485 ADAPTER CABLE FOR MD3
The CA-MD3 is an interface cable that connects a PC's USB port to an RS485 interface. The RS485 connector is a 6-pin RJ25 modular connector, and designed for US Digital's MD3...
CA-MD6A-SS-MD6
6-PIN MODULAR CONNECTOR / 6-PIN MODULAR CONNECTOR, UNSHIELDED CABLE (A2 ANALOG)
6-pin modular connectors on both ends of an unshielded silver satin 28 AWG cable. This cable is intended for connecting a single analog output A2 version of US Digital's A2...
CA-MD6-SH-MD6
6-PIN MODULAR CONNECTOR / 6-PIN MODULAR CONNECTOR, SHIELDED CABLE
6-pin modular connectors on both ends of an 8-conductor shielded round twisted pair 26 AWG cable....
CA-MD6-SH-RC10
6-PIN MODULAR CONNECTOR / 10-PIN MIL-C-5015 CONNECTOR, SHIELDED CABLE
A 10-pin MIL-C-5015 female connector connected to a 6-pin modular connector via an 8 conductor shielded round twisted pair 26 AWG cable....
CA-MD6-SS-MD6
6-PIN MODULAR CONNECTOR / 6-PIN MODULAR CONNECTOR, UNSHIELDED CABLE
A 6-pin modular connector on both ends of an unshielded silver satin 28 AWG cable....
CA-MIC3-SH-NC
3-PIN MICRO CONNECTOR / UNTERMINATED, SHIELDED CABLE
A 3-pin micro mating connector on one end of a 4-conductor shielded round 26 AWG cable....
CA-MIC3-W3-NC
3-PIN MICRO CONNECTOR / UNTERMINATED, 3-WIRE DISCRETE CABLE
A 3-pin micro mating connector on one end of three individual discrete 26 AWG wires....
CA-MIC4-SH-NC
4-PIN MICRO CONNECTOR / UNTERMINATED, SHIELDED CABLE
A 4-pin micro mating connector on one end of a four-conductor round twisted pair 26 AWG cable....
CA-MIC4-W4-NC
4-PIN MICRO CONNECTOR / UNTERMINATED, 4-WIRE DISCRETE CABLE
A 4-pin micro mating connector on one end of four individual discrete 26 AWG wires....
CA-MIC6-SH-NC
6-PIN MICRO CONNECTOR / UNTERMINATED, SHIELDED CABLE
A 6-pin micro connector on one end of a 6-conductor round twisted pair 26 AWG cable....
CA-MIC6-W6-NC
6-PIN MICRO CONNECTOR / UNTERMINATED, 6-WIRE DISCRETE CABLE
A 6-pin micro connector on one end of six individual discrete 26 AWG wires.
CA-PCL6-SH-NC
6-PIN PICO-CLASP CONNECTOR / UNTERMINATED, SHIELDED
A 6-pin Molex Pico-Clasp (# 5013300600) series, 1.0mm pitch plug connector on one end of a 6-conductor round shielded 28 AWG cable. This cable has a temperature range of -40C...
CA-RC7-SH-NC
7-PIN MIL-C-5015 CONNECTOR / UNTERMINATED, SHIELDED CABLE
A 7-pin MIL-C-5015 female connector on one end of a 7-conductor shielded round 24 AWG cable. This low-temperature cable (-20C to +80C) is used with US Digital's HD25...
CA-RC10-SH-NC
10-PIN MIL-C-5015 CONNECTOR / UNTERMINATED, SHIELDED CABLE
A 10-pin MIL-C-5015 female connector on one end of a 12-conductor shielded round 24 AWG cable. This low-temperature version has a range of -20C to +80C....
CON-C5
5-PIN STANDARD CONNECTOR
A standard TE Connectivity MTA female connector with five pins for 22-26 AWG wires (Red 22 AWG TE# 3-640440-5, White 24 AWG TE# 3-640441-5, or Blue 26 AWG TE#...
CON-C10
10-PIN STANDARD CONNECTOR
A connector with ten pre-loaded IDC pins (TE# 1-102694-0), a shell with polarizing key (TE# 102537-3), and a back cover (TE# 102536-3) for 22-26 AWG wires....
CON-CAN-MFF
T7 BUS SPLITTER - 1M TO 2F CONNECTOR
A T7 RS232 or RS485 bus splitter, 1M to 2F, sealed against dust.
CON-FC5
5-PIN LATCHING CONNECTOR
A Molex polarized latching connector shell and 5-pins for 22-26 AWG wires (22 AWG Molex# 14-56-7052, 24 AWG Molex# 14-60-0052, 26 AWG Molex# 14-60-0054), or 28 AWG Molex#...
CON-FC10
10-PIN LATCHING CONNECTOR
A polarized latching connector shell (Molex# 15-04-5104) and two IDC 5-pin inserts (Molex# 14-60-0058) for 24 AWG wires. The crimper module is Molex# 62100-0700, the...
CON-LC5
5-PIN LOCKING CONNECTOR
A locking connector shell (AMP# 1-87175-2) and 5 pins (AMP# 87165-1) for 22-26 AWG wires....
CON-MD6
6-PIN MODULAR CONNECTORS
6-pin modular connectors for flat or round cables (R Adam Tech# MTPR-66-G) and (F Adam Tech# MTP-66-G)....
CON-MIC3
3-PIN MICRO CONNECTOR
A micro mating connector shell (Molex# 51021-0300) and 3 pins for 26-28 AWG wires (Molex# 50079-8100)....
CON-MIC4
4-PIN MICRO CONNECTOR
A micro mating connector shell (Molex# 51021-0400) and 4 pins for 26-28 AWG wires (Molex # 50079-8100)....
CON-MIC6
6-PIN MICRO CONNECTOR
A micro mating connector shell (Molex# 51021-0600) and 6 pins for 26-28 AWG wires (Molex # 50079-8100)....
CON-RC7
7-PIN ROUND CONNECTOR
A 7-pin MIL-C-5015 female connector (Amphenol PN MS3106R16S-1S) for 18-24 AWG wire (solder pins)....
CON-RC10
10-PIN ROUND CONNECTOR
A 10-pin MIL-C-5015 female connector (Amphenol PN MS3106R18-1S) for 18-24 AWG wire (solder pins)....
CENTERING TOOL
CTOOL & MCTOOL
During assembly, this reusable tool is designed as a simple method for accurately locating the encoder base relative to the shaft to promote concentricity, thereby providing...
EA
INCREMENTAL ENCODER ADAPTER
Single-ended driver or differential driver/receiver available
Three digital channels (A/B/I encoder signals) per adapter
Variety of connector options
ED3
DIGITAL ENCODER DISPLAY
Seven 0.5 in. high numeric digits with blue backlight
Bidirectional counting, displays signed values from 0.000001 to 9999999
Programmable scale factor for output display
Three LEDs to indicate High, Match, or Low setpoints ...
HEXD-050
HEX DRIVER - .050 IN.
Hex driver, .050 in. flat-to-flat for #3-48 or #4-48 set screws.
HEXW
HEX WRENCH
Hex wrench. Available in .050 in., .078 in. (5/64 in.) and .094 in. (3/32 in.) flat-to-flat sizes. The .050 in. size is used with #3-48 and #4-48 set screws....
LS7082N
ENCODER TO COUNTER INTERFACE CHIP
x1, x2, and x4 mode selection
Index input
TTL and CMOS compatible
Low current (micro-amps) ...
LS7082N-S
ENCODER TO COUNTER INTERFACE CHIP
x1, x2, and x4 mode selection
Index input
TTL and CMOS compatible
Low current (micro-amps) ...
LS7083N
ENCODER TO COUNTER INTERFACE CHIP
x1 or x4 resolution multiplication
TTL and CMOS compatible
Low current (micro-amps)
8-pin DIP package ...
LS7083N-S
ENCODER TO COUNTER INTERFACE CHIP
The LSI Computer Systems IC allows incremental shaft encoders to drive standard up/down counters. Connect the encoder quadrature outputs to the A and B inputs. The LS7083N-S...
LS7084N
ENCODER TO COUNTER INTERFACE CHIP
x1 or x4 resolution multiplication
TTL and CMOS compatible
Low current (micro-amps)
8-pin DIP package ...
LS7084N-S
ENCODER TO COUNTER INTERFACE CHIP
x1 or x4 resolution multiplication
TTL and CMOS compatible
Low current (micro-amps)
8-pin SOIC package ...
LS7166A
24-BIT QUADRATURE COUNTER
US Digital is designating end-of-life status for the LSI LS7166A 24-Bit Quadrature Counter effective immediately. We have been informed by LSI Computer Systems that the...
LS7166A-S
24-BIT QUADRATURE COUNTER
Programmable count modes
DC to 40MHz count frequency
8-bit I/O bus for μP communication and control
24-bit comparator for pre-set count comparison ...
LS7183N
ENCODER TO COUNTER INTERFACE CHIP
x1, x2 or x4 resolution multiplication
TTL and CMOS compatible
Low current (micro-amps)
8-pin DIP package ...
LS7183N-S
ENCODER TO COUNTER INTERFACE CHIP
x1, x2 or x4 resolution multiplication
TTL and CMOS compatible
Low current (micro-amps)
8-pin SOIC package ...
LS7184N
ENCODER TO COUNTER INTERFACE CHIP
x1, x2 or x4 resolution multiplication
TTL and CMOS compatible
Low current (micro-amps)
8-pin DIP package ...
LS7184N-S
ENCODER TO COUNTER INTERFACE CHIP
x1, x2 or x4 resolution multiplication
TTL and CMOS compatible
Low current (micro-amps)
8-pin SOIC package ...
LS7267
24-BIT DUAL-AXIS QUADRATURE COUNTER
Dual 24-bit counters to support X and Y axes in motion control applications
Dual 24-bit comparators
Digital filtering of input quadrature clocks
Programmable 8-bit separate filter clock prescalers ...
LS7267-S
24-BIT DUAL-AXIS QUADRATURE COUNTER
Dual 24-bit counters to support X and Y axes in motion control applications
Dual 24-bit comparators
Digital filtering of input quadrature clocks
Programmable 8-bit separate filter clock prescalers ...
LS7366R-S
32-BIT QUADRATURE COUNTER WITH SERIAL INTERFACE
Operating voltage: 3V to 5.5V (VDD - VSS)
5V count frequency: 40MHz
3V count frequency: 20MHz
32-bit programmable counter ...
MD3
MICROSTEPPING MOTOR DRIVER
8 microstepping resolutions from 2 to 256 microsteps per step
-H option: 0.5 to 7.0 Amps peak phase current
-L option: 0.05 to 1.8 amps peak phase current
Single 9 to 50V supply voltage ...
PC3
ENCODER OPEN COLLECTOR CABLE DRIVER
The PC3 provides single-ended, open collector outputs and includes a switching power regulator that accepts a power supply from 9.5 to 32 volts. The PC3 is intended for...
PC4
INCREMENTAL ENCODER CABLE DRIVER
The PC4 is a small, plug-in RS-422 cable driver board that drives long cables up to one thousand feet using differential signaling to improve noise immunity. The PC4 can be...
PC6
ENCODER TO COUNTER INTERFACE BOARD
The PC6 decodes the quadrature outputs of an incremental shaft encoder to drive standard up/down counters. The PC6-U, up count / down count version, can be connected to the...
PS-12
REGULATED SWITCHING 12 V (1.5 A) POWER SUPPLY
CE Marking: Starting July 22nd, 2014, some US Digital products will contain the CE Marking. The PS-12 will not contain a CE Marking and will not be available for shipping to CE...
QSB
QUADRATURE TO USB ADAPTER
Low-cost, easy-to-use USB (Type A) adapter
QSB-S and QSB-D reads single-ended or differential quadrature, PWM and analog encoders
QSB-M adds four analog and four digital I/O pins and 1 channel stepper motor control to QSB-S
Reads quadrature count rate up to 6 MHz ...
SCREWS
THREAD FASTENERS
Unified National and Metric fasteners in a multitude of sizes and drive/head styles. Part #: SCREW-080-250-PHDescription: Pan Head, Philips #0-80 UNF x 1/4 in.Related...
SEI-USB
SEI TO USB ADAPTER
USB 1.1 device communicates at 12 Mbit/sec
Compatible with USB 2.0 hubs and host adapters
Supports up to 15 total devices on the SEI bus
Supports SEI bus lengths up to 1,000 feet, depending on the number of devices attached. ...
SPACER
SPACER TOOL
This reusable tool is used to provide and maintain the proper spacing between the encoder disk and the encoder base during assembly....
USB4
ENCODER DATA ACQUISITION USB DEVICE
Real-time tracking of up to 4 incremental encoders with or without index (up to 5 MHz encoder input frequency)
4 channel pulse width, pulse period and RPM measurement
Available with single-ended or differential encoder inputs, optional DIN rail mounting
8 digital outputs, 8 digital inputs, 4 A/D inputs , 4 D/A outputs ...
dienelectrics@gmail.com
0909186879 
