Trang chủ » Automation » Cấp nguồn | Power supply » Biến áp DC | DC/DC Converters
Bộ biến áp DC Phoenix Contact MINI-PS- 12- 24DC/ 5-15DC/2 - 2320018

Bộ biến áp DC Phoenix Contact MINI-PS- 12- 24DC/ 5-15DC/2 - 2320018

502
Nhà sản xuất:

Phoenix Contact

;   

Xuất xứ: Germany

Giá sỉ:

Giá tốt nhất xem...0909186879 dienelectrics@gmail.com

Khuyến mãi:Có Discount
Bảo hành:12 Tháng (Chính hãng)
Thanh toán:C.O.D / Bảo lãnh TT / Link hoạt
Vận chuyển:Miễn phí Tp.HCM, vùng lân cận
Thông tin nổi bật
Bộ chuyển đổi điện áp chuyển mạch sơ cấp DC/DC MINI lắp DIN Rail, đầu vào 12- 24VDC, đầu ra 5-15VDC 2A

Bộ biến áp Phoenix Contact MINI-PS- 12- 24DC/ 5-15DC/2 - 2320018

 

 

Mô tả

- Bộ chuyển đổi điện áp DC/DC MINI cho công nghệ MCR.
- Bộ chuyển đổi điện áp DC/DC làm thay đổi mức điện áp, tái tạo điện áp ở cuối cáp dài hoặc cho phép tạo ra hệ thống cung cấp độc lập bằng phương pháp cách ly điện.


Thông số kỹ thuật

Thông số đầu vào

DC operation
Nominal input voltage range 12 V DC ... 24 V DC
Input voltage range 10 V DC ... 32 V DC (> 10.5 V DC start)
Wide-range input yes
Input voltage range DC 10 V DC ... 32 V DC (> 10.5 V DC start)
Inrush current < 10 A (typical)
Inrush current integral (I2t) 0.2 A2s
Frequency range DC 0 Hz
Mains buffering time typ. 4 ms (12 V DC)
typ. 18 ms (24 V DC)
Current consumption 2.3 A (12 V DC)
1.1 A (24 V DC)
Typical response time < 0.5 s
Input fuse 6.3 A (slow-blow, internal)
 

Thông số đầu ra

Efficiency > 88 % (at 24 V DC and nominal values)
Output characteristic U/I
Nominal output voltage 12 V DC ±1 %
Setting range of the output voltage (USet) 5 V DC ... 15 V DC
Nominal output current (IN) 2 A (-25 °C ... 60 °C)
Derating 60 °C ... 70 °C (2.5%/K)
Feedback voltage resistance 30 V DC
Protection against overvoltage at the output (OVP) < 25 V DC
Residual ripple < 20 mVPP (20 MHz)
Output power 24 W
Peak switching voltages nominal load < 10 mVPP (20 MHz)
Maximum no-load power dissipation < 1 W
Power loss nominal load max. < 4.2 W
Connection in parallel yes, for assembling redundant systems and increasing efficiency
Connection in series yes
Signal: DC OK active
Output description UOUT > 0.9 x UN: High signal
Continuous load current ≤ 20 mA
 

Thông số kết nối

Input
Connection method Pluggable screw connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 14
Stripping length 7 mm
Screw thread M3
Tightening torque, min 0.5 Nm
Tightening torque max 0.6 Nm
Output
Connection method Pluggable screw connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 14
Stripping length 7 mm
Screw thread M3
Tightening torque, min 0.5 Nm
Tightening torque max 0.6 Nm
Signal
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 14
Screw thread M3
Tightening torque, min 0.5 Nm
Tightening torque max 0.6 Nm
 

Thông số LED tín hiệu

Types of signaling LED
Active switching output
Signal output: DC OK active
Status display "DC OK" LED green
Note on status display UOUT > 0.9 x UN: LED ON
Color green
Note on status display LED on
 

Thuộc tính về điện

Number of phases 1.00
Insulation voltage input/output 1.5 kV (type test)
1 kV (routine test)
 

Thuộc tính về sản phẩm

Product type DC/DC converters
MTBF (IEC 61709, SN 29500) > 2072000 h (40 °C)
Insulation characteristics
Protection class III
Degree of pollution 2
 

Thông số kích thước

Dimensional drawing
Width 22.5 mm
Height 99 mm
Depth 107 mm
Installation dimensions
Installation distance right/left 0 mm / 0 mm (≤ 70 °C)
Installation distance top/bottom 50 mm / 50 mm (≤ 70 °C)
 

Thông số lắp đặt

Assembly instructions alignable: horizontally 0 mm, vertically 50 mm
Mounting position horizontal DIN rail NS 35, EN 60715
With protective coating No
 

Thông số vật liệu

Color green
Housing material Plastic
Type of housing Polyamide PA, color: green
Housing material Polyamide (PA)
 

Điều kiện môi trường vận hành và Mức bảo vệ

Ambient conditions
Degree of protection IP20
Ambient temperature (operation) -25 °C ... 70 °C (> +60°C derating)
Ambient temperature (storage/transport) -40 °C ... 85 °C
Climatic class 3K3 (in acc. with EN 60721)
Max. permissible relative humidity (operation) ≤ 95 % (At +25°C, non-condensing)
Shock 18 ms, 30g, in each space direction (according to IEC 60068-2-27)
Vibration (operation) < 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6)
15 Hz ...150 Hz, 2.3g
 

Quy-Chuẩn

Rail applications EN 50121-4
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations EN 50178/VDE 0160 (PELV)
Standard - Electrical safety EN 60950-1/VDE 0805 (SELV)
Standard - Safe isolation DIN VDE 0100-410
DIN VDE 0106-101
 

Approval data

CSA CSA-C22.2 No. 107.1-01
UL approvals UL/C-UL listed UL 508
UL/C-UL Recognized UL 60950-1
UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous Location)
 

Thông số EMC

Low Voltage Directive Conformance with Low Voltage Directive 2014/35/EC
Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
EMC requirements for noise emission EN 61000-6-3
EN 61000-6-4
EMC requirements for noise immunity EN 61000-6-1
EN 61000-6-2
Noise emission EN 55011 (EN 55022)
Noise immunity EN 61000-6-2:2005
Electrostatic discharge
Standards/regulations EN 61000-4-2
Housing > Level 3
Electrostatic discharge
Contact discharge 8 kV (Contact discharge)
Discharge in air 8 kV (Air discharge)
Comments Criterion B
Electromagnetic HF field
Standards/regulations EN 61000-4-3
Electromagnetic HF field
Frequency range 80 MHz ... 3 GHz
Test field strength 10 V/m
Comments Criterion A
Fast transients (burst)
Standards/regulations EN 61000-4-4
Fast transients (burst)
Input 4 kV (level 4 - asymmetrical: conductor to ground)
Output 2 kV (level 3 - asymmetrical: conductor to ground)
Signal 1 kV (Level 2 - asymmetrical cable to ground)
Comments Criterion B
Surge voltage load (surge)
Standards/regulations EN 61000-4-5
Conducted interference
Standards/regulations EN 61000-4-6
Conducted interference
Input/Output Level 3
Frequency range 0.15 MHz ... 80 MHz (10 V)
Voltage dips
Standards/regulations EN 61000-4-11
Emitted interference
Standards/regulations EN 61000-6-3
Radio interference voltage in acc. with EN 55011 EN 55011 (EN 55022) Class B, area of application: Industry and residential
Emitted radio interference in acc. with EN 55011 EN 55011 (EN 55022) Class B, area of application: Industry and residential
 

Thông số thương mại

Item number 2320018
Packing unit 1 pc
Minimum order quantity 1 pc
Sales Key 090
Product Key CMDM42
Catalog Page Page 298 (C-4-2019)
GTIN 4046356478519
Weight per Piece (including packing) 230 g
Weight per Piece (excluding packing) 200 g
Customs tariff number 85044030
Country of origin CN


- Tài liệu kỹ thuật Phoenix Contact MINI-PS- 12- 24DC/ 5-15DC/2 - 2320018 ở đây.
Sản phẩm cùng loại
SẢN PHẨM XEM NHIỀU
Gọi điện thoại