Bộ chuyển áp 24VDC 24VDC 20A Phoenix Contact QUINT-PS/24DC/24DC/20 - 2320102

Bộ chuyển áp 24VDC 24VDC 20A Phoenix Contact QUINT-PS/24DC/24DC/20 - 2320102

731
Nhà sản xuất:

Phoenix Contact

;   

Xuất xứ: Germany

Giá sỉ:

Giá tốt nhất xem...0909186879 dienelectrics@gmail.com

Khuyến mãi:Có Discount
Bảo hành:12 Tháng (Chính hãng)
Thanh toán:C.O.D / Bảo lãnh TT / Link hoạt
Vận chuyển:Miễn phí Tp.HCM, vùng lân cận
Thông tin nổi bật

Bộ chuyển đổi điện áp 24VDC 24VDC 20A Phoenix Contact QUINT-PS/24DC/24DC/20 - 2320102

 

 

Mô tả

- QUINT DC/DC converter with maximum functionality

- DC/DC converters alter the voltage level, regenerate the voltage at the end of long cables or enable the creation of independent supply systems by means of electrical isolation.
- QUINT DC/DC converters magnetically and therefore quickly trip circuit breakers with six times the nominal current, for selective and therefore cost-effective system protection. The high level of system availability is additionally ensured, thanks to preventive function monitoring, as it reports critical operating states before errors occur.


Thông số kỹ thuật

Thông số đầu vào

DC operation
Nominal input voltage range 24 V DC
Input voltage range 18 V DC ... 32 V DC
Extended input voltage range in operation 14 V DC ... 18 V DC (Derating)
Wide-range input no
Input voltage range DC 18 V DC ... 32 V DC
14 V DC ... 18 V DC (Consider derating during operation)
Inrush current < 26 A (typical)
Inrush current integral (I2t) < 11 A2s
Mains buffering time typ. 10 ms (24 V DC)
Current consumption 28 A (24 V, IBOOST)
Reverse polarity protection ≤ yes30 V DC
Protective circuit Transient surge protection; Varistor
Recommended breaker for input protection 40 A ... 50 A (Characteristics B, C, D, K)
 

Thông số đầu ra

Efficiency > 93 %
Output characteristic U/I
Nominal output voltage 24 V DC ±1 %
Setting range of the output voltage (USet) 18 V DC ... 29.5 V DC (> 24 V DC, constant capacity restricted)
Nominal output current (IN) 20 A (-25 °C ... 60 °C)
POWER BOOST (IBoost) 25 A (-25 °C ... 40 °C permanent, UOUT = 24 V DC )
Selective Fuse Breaking (ISFB) 120 A (12 ms)
Magnetic circuit breaker tripping B2 / B4 / B6 / B10 / B16 / C2 / C4 / C6
Derating 60 °C ... 70 °C (2.5%/K)
Protection against overvoltage at the output (OVP) < 35 V DC
Max. capacitive load unlimited
Active current limitation approx. 29 A
Control deviation < 1 % (change in load, static 10 % ... 90 %)
< 2 % (change in load, dynamic 10 % ... 90 %)
< 0.1 % (change in input voltage ±10 %)
Residual ripple < 20 mVPP
Output power 480 W
Peak switching voltages nominal load < 10 mVPP (20 MHz)
Maximum no-load power dissipation 2.2 W
Power loss nominal load max. 39 W
Rise time < 2 ms (UOUT (10 % ... 90 %))
Connection in parallel yes, for redundancy and increased capacity
Connection in series yes
Signal: DC OK active
Output description UOUT > 0.9 x UN: High signal
Switching voltage range 18 V DC ... 24 V DC
Maximum inrush current < 20 mA (short-circuit-proof)
Signal: POWER BOOST, active
Output description IOUT < IN: High signal
Switching voltage range 18 V DC ... 24 V DC
Maximum inrush current < 20 mA (short-circuit-proof)
Signal: UIN OK, active
Output description UIN > 19.2 V: High signal
Switching voltage range 18 V DC ... 24 V DC
Maximum inrush current ≤ 20 mA (short-circuit-proof)
Signal: DC OK floating
Output description Relay
Output voltage ≤ 30 V AC/DC
Maximum inrush current ≤ 100 mA
Signal: DC OK active
Output description UOUT > 0.9 x UN: High signal
Switching voltage range 18 V DC ... 24 V DC
Maximum inrush current < 20 mA (short-circuit-proof)
Signal: POWER BOOST, active
Output description IOUT < IN: High signal
Switching voltage range 18 V DC ... 24 V DC
Maximum inrush current < 20 mA (short-circuit-proof)
Signal: UIN OK, active
Output description UIN > 19.2 V: High signal
Switching voltage range 18 V DC ... 24 V DC
Maximum inrush current ≤ 20 mA (short-circuit-proof)
Signal: DC OK floating
Output description Relay
Output voltage ≤ 30 V AC/DC
Maximum inrush current ≤ 100 mA
Signal: DC OK active
Output description UOUT > 0.9 x UN: High signal
Switching voltage range 18 V DC ... 24 V DC
Maximum inrush current < 20 mA (short-circuit-proof)
Signal: POWER BOOST, active
Output description IOUT < IN: High signal
Switching voltage range 18 V DC ... 24 V DC
Maximum inrush current < 20 mA (short-circuit-proof)
Signal: UIN OK, active
Output description UIN > 19.2 V: High signal
Switching voltage range 18 V DC ... 24 V DC
Maximum inrush current ≤ 20 mA (short-circuit-proof)
Signal: DC OK floating
Output description Relay
Output voltage ≤ 30 V AC/DC
Maximum inrush current ≤ 100 mA
Signal: DC OK active
Output description UOUT > 0.9 x UN: High signal
Switching voltage range 18 V DC ... 24 V DC
Maximum inrush current < 20 mA (short-circuit-proof)
Signal: POWER BOOST, active
Output description IOUT < IN: High signal
Switching voltage range 18 V DC ... 24 V DC
Maximum inrush current < 20 mA (short-circuit-proof)
Signal: UIN OK, active
Output description UIN > 19.2 V: High signal
Switching voltage range 18 V DC ... 24 V DC
Maximum inrush current ≤ 20 mA (short-circuit-proof)
Signal: DC OK floating
Output description Relay
Output voltage ≤ 30 V AC/DC
Maximum inrush current ≤ 100 mA
 

Thông số kết nối

Input
Connection method Screw connection
Conductor cross section solid min. 0.5 mm²
Conductor cross section solid max. 16 mm²
Conductor cross section flexible min. 0.5 mm²
Conductor cross section flexible max. 16 mm²
Conductor cross section AWG min. 8
Conductor cross section AWG max. 6
Stripping length 10 mm
Screw thread M3
Tightening torque, min 1.2 Nm
Tightening torque max 1.5 Nm
Output
Connection method Screw connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 6 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 4 mm²
Conductor cross section AWG min. 12
Conductor cross section AWG max. 10
Stripping length 8 mm
Screw thread M3
Tightening torque, min 0.5 Nm
Tightening torque max 0.6 Nm
Signal
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 12
Screw thread M3
Tightening torque, min 0.5 Nm
Tightening torque max 0.6 Nm
 

Thông số đèn LED tín hiệu

Types of signaling LED
Active switching output
Relay contact
Signal output: DC OK active
Status display "DC OK" LED green
Note on status display UOUT < 0.9 x UN: LED flashing
Color green
Note on status display LED flashing
Signal output: POWER BOOST, active
Status display "BOOST" LED yellow/IOUT > IN : LED on
Color yellow
Note on status display LED on
Signal output: UIN OK, active
Status display LED "UIN < 19.2 V" yellow/UIN < 19.2 V DC: LED on
Color yellow
Note on status display LED on
Signal output: DC OK floating
Note on status display UOUT > 0.9 x UN: Contact closed
 

Tính chất về điện

Number of phases 1.00
Insulation voltage input/output 1.5 kV (type test)
1 kV (routine test)
Insulation voltage input/output 1 kV (type test)
 

Tính chất sản phẩm

Product type DC/DC converters
MTBF (IEC 61709, SN 29500) > 554000 h (40 °C)
Insulation characteristics
Protection class III
Degree of pollution 2
 

Kích thước

Width 82 mm
Height 130 mm
Depth 125 mm
Installation dimensions
Installation distance right/left 0 mm / 0 mm (≤ 70 °C)
Installation distance right/left (active) 15 mm / 15 mm (≤ 70 °C)
Installation distance top/bottom 50 mm / 50 mm (≤ 70 °C)
Installation distance top/bottom (active) 50 mm / 50 mm (≤ 70 °C)
Alternative assembly
Width 122 mm
Height 130 mm
Depth 85 mm
 

Thông số lắp đặt

Mounting type DIN rail mounting
Assembly instructions alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm vertically
alignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
Mounting position horizontal DIN rail NS 35, EN 60715
With protective coating No
 

Thông số vật liệu

Color aluminium
Housing material Metal
Type of housing Aluminum (AlMg3)
Hood version Galvanized sheet steel, free from chrome (VI)
 

Điều kiện môi trường vận hành và Mức bảo vệ

Ambient conditions
Degree of protection IP20
Ambient temperature (operation) -25 °C ... 70 °C (> 60 °C derating, 2.5 %/K, startup at -40°C type-tested)
Ambient temperature (storage/transport) -40 °C ... 85 °C
Ambient temperature (start-up type tested) -40 °C
Climatic class 3K3 (in acc. with EN 60721)
Max. permissible relative humidity (operation) ≤ 95 % (at 25 °C, non-condensing)
Shock 18 ms, 30g, in each space direction (according to IEC 60068-2-27)
Vibration (operation) < 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6)
15 Hz ... 150 Hz, 2.3g, 90 min.
 

Quy-Chuẩn

Rail applications EN 50121-4
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations EN 50178/VDE 0160 (PELV)
Standard - Electrical safety EN 60950-1/VDE 0805 (SELV)
Standard – Safety extra-low voltage EN 60950-1 (SELV)
EN 60204 (PELV)
Standard - Safe isolation DIN VDE 0100-410
 

Approval data

Shipbuilding approval DNV GL (EMC B)
UL approvals UL/C-UL listed UL 508
UL/C-UL Recognized UL 60950-1
UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous Location)
 

Thông số EMC

Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
EMC requirements for noise emission EN 61000-6-3
EN 61000-6-4
EMC requirements for noise immunity EN 61000-6-1
EN 61000-6-2
Noise immunity EN 61000-6-2:2005
Electrostatic discharge
Standards/regulations EN 61000-4-2
Electrostatic discharge
Contact discharge 8 kV (Test Level 4)
Discharge in air 15 kV (Test Level 4)
Comments Criterion A
Electromagnetic HF field
Standards/regulations EN 61000-4-3
Electromagnetic HF field
Frequency range 80 MHz ... 1 GHz
Test field strength 10 V/m
Frequency range 1 GHz ... 2 GHz
Test field strength 10 V/m
Frequency range 2 GHz ... 3 GHz
Test field strength 10 V/m
Comments Criterion A
Fast transients (burst)
Standards/regulations EN 61000-4-4
Fast transients (burst)
Input 2 kV (Test Level 3 - asymmetrical)
Output 2 kV (Test Level 3 - asymmetrical)
Signal 2 kV (Test Level 4 - asymmetrical)
Comments Criterion A
Surge voltage load (surge)
Standards/regulations EN 61000-4-5
Input 1 kV (Test Level 2 - symmetrical)
2 kV (Test Level 3 - asymmetrical)
Output 1 kV (Test Level 2 - symmetrical)
2 kV (Test Level 3 - asymmetrical)
Signal 1 kV (Test Level 2 - asymmetrical)
Comments Criterion A
Conducted interference
Standards/regulations EN 61000-4-6
Conducted interference
I/O/S asymmetrical
Frequency range 0.15 MHz ... 80 MHz
Comments Criterion A
Voltage 10 V (Test Level 3)
Emitted interference
Standards/regulations EN 61000-6-3
Radio interference voltage in acc. with EN 55011 EN 55011 (EN 55022) Class B, area of application: Industry and residential
Emitted radio interference in acc. with EN 55011 EN 55011 (EN 55022) Class B, area of application: Industry and residential
Criterion A Normal operating behavior within the specified limits.
Criterion B Temporary impairment to operational behavior that is corrected by the device itself.
 

Thông số thương mại

Item number 2320102
Packing unit 1 pc
Minimum order quantity 1 pc
Product Key CMDQ43
Catalog Page Page 292 (C-4-2019)
GTIN 4046356481892
Weight per Piece (including packing) 2,126 g
Weight per Piece (excluding packing) 1,700 g
Customs tariff number 85044030
Country of origin IN


- Tài liệu kỹ thuật Phoenix Contact QUINT-PS/24DC/24DC/20 - 2320102 ở đây.


Tham khảo thêm các model khác cùng loại:

QUINT4-PS/12DC/24DC/5/PT - 2910124

Primary-switched DC/DC converter, QUINT POWER, DIN rail mounting, SFB Technology (Selective Fuse Breaking),- 12 V DC, output: 24 V DC / 5 A
 

TRIO-PS-2G/1500DC/24DC/1.5 - 1107892

Primary-switched TRIO POWER DC/DC converter with Push-in connection for DIN rail mounting, input: 1,500 V DC, output: 24 V DC / 1.5 A
 

QUINT4-PS/24-48DC/48DC/2/PT - 1098676

Primary-switched DC/DC converter, QUINT POWER, DIN rail mounting, input: 24 V DC - 48 V DC, output: 48 V DC / 2 A
 

MINI-PS- 12- 24DC/ 5-15DC/2 - 2320018

Please use the following item in new systems: 1066704.
Primary-switched MINI DC/DC converter for DIN rail mounting, input: 12 - 24 V DC, output: 5 - 15 V DC/2 A
 

QUINT-PS/24DC/24DC/10 - 2320092

Primary-switched QUINT DC/DC converter for DIN rail mounting with SFB (Selective Fuse Breaking) Technology, input: 24 V DC, output: 24 V DC/10 A
 

QUINT-PS/24DC/24DC/ 5 - 2320034

Primary-switched QUINT DC/DC converter for DIN rail mounting with SFB (Selective Fuse Breaking) Technology, input: 24 V DC, output: 24 V DC/5 A
 

MINI-PS- 12- 24DC/24DC/1 - 2866284

Please use the following items in new systems: 1066703, 1066716, 1066718, 1066714.
Primary-switched MINI DC/DC converter for DIN rail mounting, input: 12 - 24 V DC, output: 24 V DC/1 A
 

QUINT4-PS/48DC/24DC/5/PT - 2910125

Primary-switched DC/DC converter, QUINT POWER, DIN rail mounting, SFB Technology (Selective Fuse Breaking),- 48 V DC, output: 24 V DC / 5 A
 

QUINT-PS/24DC/24DC/20 - 2320102

Primary-switched QUINT DC/DC converter for DIN rail mounting with SFB (Selective Fuse Breaking) Technology, input: 24 V DC, output: 24 V DC/20 A
 

QUINT4-PS/24DC/24DC/5/PT - 2910119

Primary-switched DC/DC converter, QUINT POWER, DIN rail mounting, SFB Technology (Selective Fuse Breaking),- 24 V DC, output: 24 V DC / 5 A
 

QUINT4-PS/24DC/24DC/10/SC - 1046803

Primary-switched QUINT DC/DC converter for DIN rail mounting with SFB (Selective Fuse Breaking) Technology, screw connection, input: 24 V DC, output: 24 V DC / 10 A
 

QUINT4-PS/24DC/24DC/20/SC/+ - 1046881

Primary-switched DC/DC converter, QUINT POWER, DIN rail mounting, SFB Technology (Selective Fuse Breaking),- 24 V DC, output: 24 V DC / 20 A
 

QUINT-PS/96-110DC/24DC/10/CO - 2905012

Primary-switched QUINT DC/DC converter with wide range input for DIN rail mounting with SFB (selective fuse breaking) technology, input: 96 - 110 V DC, output: 24 V DC/10 A
 

QUINT-PS/12DC/24DC/ 5 - 2320131

Primary-switched QUINT DC/DC converter for DIN rail mounting with SFB (Selective Fuse Breaking) Technology, input: 12 V DC, output: 24 V DC/5 A
 

QUINT-PS/96-110DC/24DC/10 - 2905010

Primary-switched QUINT DC/DC converter with wide range input for DIN rail mounting with SFB (selective fuse breaking) technology, input: 96 - 110 V DC, output: 24 V DC/10 A
 

MINI-PS- 48- 60DC/24DC/1 - 2866271

Please use the following item in new systems: 1066708.
Primary-switched MINI DC/DC converter for DIN rail mounting, input: 48 - 60 V DC, output: 24 V DC/1 A
 

QUINT-PS/24DC/48DC/ 5 - 2320128

Primary-switched QUINT DC/DC converter for DIN rail mounting with SFB (Selective Fuse Breaking) Technology, input: 24 V DC, output: 48 V DC/5 A
 

QUINT-PS/24DC/12DC/ 8 - 2320115

Primary-switched QUINT DC/DC converter for DIN rail mounting with SFB (Selective Fuse Breaking) Technology, input: 24 V DC, output: 12 V DC/8 A
 

TRIO-PS-2G/1500DC/24DC/8 - 1075240

Primary-switched TRIO POWER DC/DC converter with Push-in connection for DIN rail mounting, input: 1,500 V DC, output: 24 V DC / 8 A
 

QUINT4-PS/12-24DC/24DC/2.5/PT - 1066714

Primary-switched DC/DC converter, QUINT POWER, DIN rail mounting, input: 12 V DC - 24 V DC, output: 24 V DC / 2.5 A
 

QUINT4-PS/48-110DC/24DC/2.5/PT - 1066708

Primary-switched DC/DC converter, QUINT POWER, DIN rail mounting, input: 48 V DC - 110 V DC, output: 24 V DC / 2.5 A
 

QUINT4-PS/12-24DC/5-15DC/2.5/PT - 1066704

Primary-switched DC/DC converter, QUINT POWER, DIN rail mounting, input: 12 V DC - 24 V DC, output: 12 V DC / 2.5 A
 

QUINT4-PS/12-24DC/24DC/1.3/SC - 1066703

Primary-switched DC/DC converter, QUINT POWER, DIN rail mounting, input: 12 V DC - 24 V DC, output: 24 V DC / 1.3 A
 

QUINT4-PS/24DC/48DC/5/PT - 2910123

Primary-switched DC/DC converter, QUINT POWER, DIN rail mounting, SFB Technology (Selective Fuse Breaking),- 24 V DC, output: 48 V DC / 5 A
 

QUINT-PS/48DC/24DC/ 5 - 2320144

Primary-switched QUINT DC/DC converter for DIN rail mounting with SFB (Selective Fuse Breaking) Technology, input: 48 V DC, output: 24 V DC/5 A
 

QUINT4-PS/12-24DC/24DC/1.3/PT - 1066716

Primary-switched DC/DC converter, QUINT POWER, DIN rail mounting, input: 12 V DC - 24 V DC, output: 24 V DC / 1.3 A
 

QUINT4-PS/24DC/12DC/8/PT - 2910122

Primary-switched DC/DC converter, QUINT POWER, DIN rail mounting, SFB Technology (Selective Fuse Breaking),- 24 V DC, output: 12 V DC / 8 A
 

QUINT4-PS/24DC/24DC/20/PT - 2910121

Primary-switched DC/DC converter, QUINT POWER, DIN rail mounting, SFB Technology (Selective Fuse Breaking),- 24 V DC, output: 24 V DC / 20 A
 

TWN4 MIFARE NFC USB ADAPTER - 2909681

Near Field Communication (NFC) programming adapter with USB interface for the wireless configuration of NFC-capable products from PHOENIX CONTACT with software. No separate USB driver is required.
 

UNO-PS/350-900DC/24DC/60W - 2906300

Primary-switched UNO DC/DC converter with wide range input, for DIN rail mounting, input: 350 ... 900 V DC, output: 24 V DC/60 W
 

QUINT4-PS/24DC/24DC/5/SC - 1046800

Primary-switched DC/DC converter, QUINT POWER, DIN rail mounting, SFB Technology (Selective Fuse Breaking),- 24 V DC, output: 24 V DC / 5 A
 

QUINT4-PS/24DC/24DC/5/PT/CO - 2910132

Primary-switched DC/DC converter, QUINT POWER, DIN rail mounting, SFB Technology (Selective Fuse Breaking),- 24 V DC, output: 24 V DC / 5 A
 

QUINT4-PS/24DC/24DC/10/PT - 2910120

Primary-switched DC/DC converter, QUINT POWER, DIN rail mounting, SFB Technology (Selective Fuse Breaking),- 24 V DC, output: 24 V DC / 10 A
 

QUINT-PS/60-72DC/24DC/10/CO - 2905011

Primary-switched QUINT DC/DC converter with wide range input for DIN rail mounting with SFB (Selective Fuse Breaking) technology, input: 60-72 V DC, output 24 V DC / 10 A
 

QUINT-PS/48DC/48DC/5 - 2905008

Primary-switched QUINT DC/DC converter for DIN rail mounting with SFB (selective fuse breaking) technology, input: 48 V DC, output: 48 V DC/5 A
 

QUINT4-PS/24DC/24DC/10/PT/CO - 2910133

Primary-switched DC/DC converter, QUINT POWER, DIN rail mounting, SFB Technology (Selective Fuse Breaking),- 24 V DC, output: 24 V DC / 10 A
 

QUINT4-PS/48DC/48DC/5/PT - 2910128

Primary-switched DC/DC converter, QUINT POWER, DIN rail mounting, SFB Technology (Selective Fuse Breaking),- 48 V DC, output: 48 V DC / 5 A


QUINT-PS/60-72DC/24DC/10 - 2905009
Primary-switched QUINT DC/DC converter with wide range input for DIN rail mounting with SFB (Selective Fuse Breaking) technology, input: 60-72 V DC, output 24 V DC / 10 A
 

QUINT-PS/12DC/12DC/8 - 2905007

Primary-switched QUINT DC/DC converter for DIN rail mounting with SFB (selective fuse breaking) technology, input: 12 V DC, output: 12 V DC/8 A
 

MINI-PS- 12- 24DC/48DC/0.7 - 2320021

Please use the following item in new systems: 1098676.
Primary-switched MINI DC/DC converter for DIN rail mounting, input: 12 - 24 V DC, output: 48 V DC/0.7 A
 

QUINT4-PS/12-24DC/24DC/2.5/SC - 1066718

Primary-switched DC/DC converter, QUINT POWER, DIN rail mounting, input: 12 V DC - 24 V DC, output: 24 V DC / 2.5 A
 

QUINT4-PS/24DC/24DC/20/SC - 1046805

Primary-switched DC/DC converter, QUINT POWER, DIN rail mounting, SFB Technology (Selective Fuse Breaking),- 24 V DC, output: 24 V DC / 20 A
 

MINI-PS- 10- 42AC/15-60DC/3 - 2320199

The AC feed module supplies the MINI DC/DC converter with a rectified and filtered supply voltage.
Sản phẩm cùng loại
Gọi điện thoại