Cảm biến khuếch đại sợi quang Omron E3X-MDA Series -Đặc tính, Ưu điểm và Tất cả models

NPN/ PNP output, Pre-wired/ Fiber amplifier connector, AND/OR output. Hai bộ khuếch đại kỹ thuật số trong một vỏ mỏng, Mô hình đầu ra đôi - bật / tắt hoặc khu vực (giữa hai giá trị ngưỡng), Chức năng so sánh tín hiệu (AND, OR, v.v.). Bộ khuếch đại sợi quang kỹ thuật số 2 trong 1. E3X-MDA kết hợp 2 bộ khuếch đại sợi quang kỹ thuật số trong một vỏ mỏng. Đối với các ứng dụng yêu cầu phát hiện đồng thời hai đối tượng, E3X-MDA cung cấp một thao tác dễ sử dụng, tiết kiệm không gian và thời gian thiết lập.

E3X-MDA

2-in-1 digital fiber amplifier
E3X-MDA incorporates 2 digital fiber amplifiers in one slimline housing. For applications requiring the detection of two objects simultanously the E3X-MDA provides an easy to use operation saving space and set-up time.

- Two digital amplifiers in one slimline housing
- Twin output models – on/off or area (between two threshold values)
- Signal comparison functions (AND, OR, etc.)

Các models
Model   E3X-MDA11   NPN output     Pre-wired     Functions   AND/OR output
Model   E3X-MDA6   NPN output     Fiber amplifier connector     Functions   AND/OR output
Model   E3X-MDA41   PNP output     Pre-wired     Functions   AND/OR output
Model   E3X-MDA8   PNP output     Fiber amplifier connector     Functions   AND/OR output

Fiber amplifier connectors

Shape	Type	Comment	Order code
	Fiber amplifier connector	2 m PVC cable	E3X-CN21
		30 cm PVC cable with M12 plug connector (4 pin)	E3X-CN21-M1J 0.3M
		30 cm PVC cable with M8 plug connector (4 pin)	E3X-CN21-M3J-2 0.3M

Specifications

Item	E3X-MDA
Light source (wave length)	Red LED (650 nm)
Power supply voltage	12 to 24 VDC±10%, ripple (p-p) 10% max.
Protective circuits	Power supply reverse polarity protection, output short-circuit protection, mutual interference prevention
Response time Super-high-speed mode	130 µs for operation and reset respectively
Response time Standard mode	1 ms for operation and reset respectively
Response time High-resolution mode	4 ms for operation and reset respectively
Sensitivity setting	Teaching and digital up/down keys
Functions Power tuning	Light emission power and reception gain, digital control method
Functions Timer function	Select from OFF-delay, ON-delay, or one-shot timer.
	1 ms to 5 s (1 to 20 ms set in 1-ms increments, 20 to 200 ms set in 10-ms increments,
	200 ms to 1 s set in 100-ms increments, and 1 to 5 s set in 1 s-increments)
Functions I/O settings	Output setting (select from channel 2 output, AND, OR, leading edge sync, falling edge sync, or differential output)
Digital displays	Select from the following: Incident level for channel 1 + incident level for channel 2, Incident level + threshold, incident level percentage + threshold, incident light peak level + no incident light bottom level, minimum incident light peak level + maximum no incident light bottom level, long bar display, incident level + peak hold, incident level + channel
Degree of protection	IEC 60529 IP50 (with protective cover attached)