CB chống quá tải-ngắn mạch Phoenix Contact PTCB E1 24DC/4A NO - 2909906 | 24VDC 4A NO

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm PHOENIX CONTACT

• 

  ELCB - Earth Leakage Circuit Breaker là gì?

• Xem thêm

Phoenix Contact PTCB E1 24DC/4A NO - 2909906 là CB chống quá tải-ngắn mạch 24VDC 4A NO

 

- Tài liệu kỹ thuật của CB chống quá tải-ngắn mạch Phoenix Contact PTCB E1 24DC/4A NO - 2909906 ở đây.

 

Technical data của CB chống quá tải-ngắn mạch Phoenix Contact PTCB E1 24DC/4A NO - 2909906

Notes của CB chống quá tải-ngắn mạch Phoenix Contact PTCB E1 24DC/4A NO - 2909906

General
Note	EN 50121-3-2: Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock – Apparatus
	Connection for signal line tested in accordance with EN 61000-4-4 with 1 kV; if necessary, customer must provide appropriate protective measures
	Repeated hard short circuits can reduce the melting integral of the integrated backup fuse.

 

Product properties của CB chống quá tải-ngắn mạch Phoenix Contact PTCB E1 24DC/4A NO - 2909906

Product type	Device circuit breakers
Product family	PTCB
Type	DIN rail module, one-piece
Number of positions	1
No. of channels	1
Insulation characteristics
Protection class	III
Pollution degree	2

 

Electrical properties của CB chống quá tải-ngắn mạch Phoenix Contact PTCB E1 24DC/4A NO - 2909906

General
Operating voltage	18 V DC ... 30 V DC
Rated voltage	24 V DC
Rated current IN	24 A DC (Total current input)
	4 A DC (Rated current output)
Rated current (pre-adjusted)	4 A
Rated surge voltage	0.5 kV
Tripping method	E (electronic)
Feedback resistance	max. 35 V DC
Required backup fuse	Only required if Imax of the power supply > the short-circuit switching capacity. Integrated failsafe element.
Short-circuit switching capacity	300 A
Dielectric strength	max. 35 V DC (Load circuit)
Fuse	electronic
Efficiency	> 99 %
Closed circuit current I0	typ. 12 mA
Power dissipation	typ. 0.3 W (No-load operation)
	< 1.3 W (Nominal operation)
Module initialization time	< 0.55 s
Waiting time after switch off of a channel	5 s (at overload / short circuit)
Measuring tolerance I	± 15 %
Temperature derating	21 A (Total current at 60°C)
	24 A (Total current at 50°C)
	4 A (Channel current at 60°C)
	4 A (Channel current at 50°C)
MTBF (IEC 61709, SN 29500)	28571428 h (at 25 °C with 21 % load)
	14084507 h (at 40°C with 34.25% load)
	2053388 h (at 60°C with 100% load)
Voltage drop	0.12 V (at 4 A)
Fail-safe element	4 A DC
Contact switching type	without electrical isolation
Load circuit
Shutdown time	≤ 10 ms (for short circuit > 2.0 x IN)
	1 s (1.2 ... 2.0 x IN)
Undervoltage switch-off	≤ 17.8 V DC (active)
	≥ 18.8 V DC (inactive)
Overvoltage switch-off	≥ 30.5 V DC (active)
	≤ 29.5 V DC (inactive)
Max. capacitive load	15000 µF (Depending on the available short-circuit current)
Indicator/remote signaling
Connection name	Remote indication circuit
Switching function	N/O contact
Operating voltage	0 V DC ... 30 V DC
Operating current	100 mA DC

 

Connection data của CB chống quá tải-ngắn mạch Phoenix Contact PTCB E1 24DC/4A NO - 2909906

Main circuit IN+
Connection method	Push-in connection
Stripping length	8 mm
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section rigid	0.2 mm² ... 4 mm²
Conductor cross section AWG	24 ... 12
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.2 mm² ... 2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve	0.2 mm² ... 2.5 mm²
Main circuit IN-
Connection method	Push-in connection
Stripping length	8 mm
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section rigid	0.2 mm² ... 4 mm²
Conductor cross section AWG	24 ... 12
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.2 mm² ... 2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve	0.2 mm² ... 2.5 mm²
Main circuit OUT
Connection method	Push-in connection
Stripping length	8 mm
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section rigid	0.2 mm² ... 4 mm²
Conductor cross section AWG	24 ... 12
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.2 mm² ... 2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve	0.2 mm² ... 2.5 mm²
Remote indication circuit
Connection method	Push-in connection
Stripping length	8 mm
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section rigid	0.2 mm² ... 4 mm²
Conductor cross section AWG	24 ... 14
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.2 mm² ... 2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve	0.2 mm² ... 2.5 mm²

 

Signaling của CB chống quá tải-ngắn mạch Phoenix Contact PTCB E1 24DC/4A NO - 2909906

Channel LED off	off (Channel switched off)
Channel LED yellow	lit (Channel switched on, channel load > 80% )
	flashing (Programming mode active)
Channel LED green	lit (Channel switched on)
Channel LED red	lit (Channel switched off, over- or undervoltage active)
	ON temporarily (Channel switched off, 5 s cool-down phase, overload or short-circuit release)
	flashing (Channel switched off, ready to be switched back on, overload or short-circuit release)
	flashing quickly (Channel switched off, external voltage at the output, possible installation error)

 

Dimensions của CB chống quá tải-ngắn mạch Phoenix Contact PTCB E1 24DC/4A NO - 2909906

Dimensional drawing
Width	6.2 mm
Height	105.8 mm
Depth	55.6 mm (incl. DIN rail 7.5 mm)

 

Material specifications của CB chống quá tải-ngắn mạch Phoenix Contact PTCB E1 24DC/4A NO - 2909906

Color	gray (RAL 7042)
Material	PBT
	PBT
Flammability rating according to UL 94	V-0

 

Environmental and real-life conditions của CB chống quá tải-ngắn mạch Phoenix Contact PTCB E1 24DC/4A NO - 2909906

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-30 °C ... 60 °C
Ambient temperature (storage/transport)	-40 °C ... 70 °C
Altitude	≤ 3000 m up to 52 °C (amsl)
	≤ 4000 m up to 46 °C (amsl)
Humidity test	96 h, 95 % RH, 40 °C
Shock (operation)	30g (IEC 60068-2-27, Test Ea)
Vibration (operation)	10 Hz ... 59.6 Hz (Amplitude ±0.35 mm; in accordance with IEC 60068-2-6, Test Fc)
	59.6 Hz … 150 Hz (Acceleration 5g; in accordance with IEC 60068-2-6, Test Fc)
	5 Hz … 100 Hz (Resonance search 4g; resonance frequency 4g; 90 min in accordance with DNV GL Class B)

 

Approvals của CB chống quá tải-ngắn mạch Phoenix Contact PTCB E1 24DC/4A NO - 2909906

UL approval
Identification	UL/C-UL Listed UL 508
	UL Recognized UL 2367
	UL/C-UL Listed ANSI/UL 121201 Class I, Division 2, Groups A, B, C, D; T4 (Hazardous Location)
Shipbuilding approval
Identification	DNV GL
Corrosive gas test
Identification	ISA S71.04.2013 G3 Harsh Group A
Shipbuilding data
Temperature	D
Humidity	B
Vibration	B
EMC	B
Enclosure	A

 

Standards and regulations của CB chống quá tải-ngắn mạch Phoenix Contact PTCB E1 24DC/4A NO - 2909906

Standards/specifications	EN 61000-6-2
Note	EMC – Immunity for industrial areas
Standards/specifications	EN 61000-6-3
Note	EMC – Emission for residential, business and commercial properties and small operations
Standards/specifications	EN 60068-2-78
Note	Environmental influences – Moisture and heat, constant
Standards/specifications	EN 50178
Note	Equipping power installations with electronic equipment
Standards/specifications	EN 60068-2-6
Note	Environmental influences – Vibrations (sinusoidal)
Standards/specifications	EN 60068-2-27
Note	Environmental influences – Shocks
Standards/specifications	EN 60068-2-30
Note	Environmental influences – Part 2–30: Tests – Test Db: Damp heat, cyclical
Standards/specifications	EN 61373
Note	Railway applications - Rolling stock equipment - Shock and vibration tests
Standards/specifications	EN 45545-2
Note	Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behavior of materials and components

 

Mounting của CB chống quá tải-ngắn mạch Phoenix Contact PTCB E1 24DC/4A NO - 2909906

Mounting type

DIN rail: 35 mm

 

Commercial data của CB chống quá tải-ngắn mạch Phoenix Contact PTCB E1 24DC/4A NO - 2909906

Item number	2909906
Packing unit	1 pc
Minimum order quantity	1 pc
Sales key	CLA135
Product key	CLA135
Catalog page	Page 379 (C-4-2019)
GTIN	4055626408736
Weight per piece (including packing)	34.7 g
Weight per piece (excluding packing)	27.58 g
Customs tariff number	85363010
Country of origin	DE

 

Classifications của CB chống quá tải-ngắn mạch Phoenix Contact PTCB E1 24DC/4A NO - 2909906

ECLASS

ECLASS-13.0

27140401

ETIM

ETIM 9.0

EC003538

UNSPSC

UNSPSC 21.0

39121400

 

Approvals của CB chống quá tải-ngắn mạch Phoenix Contact PTCB E1 24DC/4A NO - 2909906

UL Recognized

Approval ID: E317172-20170817
 

DNV GL

Approval ID: TAE00003UT
 

UL Listed

Approval ID: E123528-20170530
 

cUL Listed

Approval ID: E123528-20170530
 

UL Recognized

Approval ID: E324415-20201030
 

cUL Listed

Approval ID: E483407-20201030
 

UL Listed

Approval ID: E483407-20201030
 

Environmental product compliance của CB chống quá tải-ngắn mạch Phoenix Contact PTCB E1 24DC/4A NO - 2909906

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)	EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Lead (CAS: 7439-92-1)
SCIP	639a383c-d359-4216-a326-e11fde3e4bbf
EF3.0 Climate Change
CO2e kg	1.06 kg CO2e

 

Tham khảo thêm các model khác cùng loại với :

CAPAROC PM EIP - Feed-in module
1393553
Power module with EtherNet/IP™ interface for supplying the CAPAROC circuit breaker system with 12 V DC or 24 V DC. Additional system interface for communication with the power supply. For DIN rail installation via the CAPAROC current rails.
PTCB E1 48DC/1-6A NO - Electronic circuit breaker
1471917
Single-channel, electronic device protection for 48 V DC loads. Nominal current adjustable from 1-6 A. With floating remote indication contact. Can be combined with CLIPLINE terminal blocks. For installation on DIN rails.
CBM E8 24DC/0.5-10A NO-R - Electronic circuit breaker
2905744
Multi-channel, electronic circuit breaker with active current limitation for protecting eight loads at 24 V DC in the event of overload and short circuit. With nominal current assistant and electronic locking of the set nominal currents. For installation on DIN rails.
PTCB E1 24DC/1-8A NO - Electronic circuit breaker
2908262
1-channel, electronic circuit breaker for protecting loads at 24 V DC against overload and short circuit. Easy potential distribution with components from the CLIPLINE complete terminal block system. With electronic interlock of the set nominal currents. For installation on DIN rails.
CBM E4 24DC/0.5-10A NO-R - Electronic circuit breaker
2905743
Multi-channel, electronic circuit breaker with active current limitation for protecting four loads at 24 V DC in the event of overload and short circuit. With nominal current assistant and electronic locking of the set nominal currents. For installation on DIN rails.
CB 1/10-1/10 UT-BE - Base element
2801305
Base element with screw connection technology for CB... device circuit breakers
CB PT BRIDGE - Bridge
2801014
Bridge plug for bridging contacts 1 to 2 for CB base elements
CB 1/6-2/4 PT-BE - Base element
2800929
Base element with push-in connection technology for CB ... device circuit breakers
PTCB E1 24DC/1-8A SI-R - Electronic circuit breaker
1135752
1-channel, electronic fuse for protecting 24 V loads. Easy potential distribution with terminal blocks from the CLIPLINE complete system. With status output, reset input, and electronic interlock. For installation on DIN rails.
CAPAROC E4 12-24DC/1-10A - Electronic circuit breaker
1115658
Four-channel electronic circuit breaker module for protecting 12 and 24 V DC loads against overload and short circuit. Nominal current adjustable from 1 A to 10 A via LED button. For DIN rail installation via the CAPAROC current rails.
CBMC E4 24DC/1-10A NO - Electronic circuit breaker
2906032
Multi-channel electronic circuit breaker for protecting four loads at 24 V DC in the event of overload and short circuit. With electronic locking of the set nominal currents. For installation on DIN rails.
PTCB E1 24DC/1-4A NO - Electronic circuit breaker
2908261
1-channel, electronic circuit breaker for protecting loads at 24 V DC against overload and short circuit. Easy potential distribution with components from the CLIPLINE complete terminal block system. With electronic interlock of the set nominal currents. For installation on DIN rails.
CBMC E4 24DC/1-4A NO - Electronic circuit breaker
2906031
Multi-channel electronic circuit breaker for protecting four loads at 24 V DC in the event of overload and short circuit. With electronic locking of the set nominal currents. For installation on DIN rails.
CAPAROC CR 20 - Busbar
1110989
Busbar for CAPAROC system with 20 slots. For installation on a DIN rail.
CAPAROC CR 8 - Busbar
1115672
Busbar for the CAPAROC system with 8 slots. For installation on a DIN rail.
CAPAROC PM S-R - Feed-in module
1115661
Power module with status output and reset input for supplying the CAPAROC circuit breaker system with 12 or 24 V DC. For DIN rail installation via the CAPAROC current rails.
PTCB E1 24DC/4A NO - Electronic circuit breaker
2909906
1-channel, electronic circuit breaker for protecting loads at 24 V DC against overload and short circuit. Easy potential distribution with components from the CLIPLINE complete terminal block system. With fixed nominal current. For installation on DIN rails.
CAPAROC PD 0V - Potential distributors
1110987
Potential distributor with Push-in connections for directly connecting the 0 V return conductor in the CAPAROC system. For DIN rail installation via the CAPAROC current rails.
CBMC E4 24DC/1-10A IOL - Electronic circuit breaker
2910411
Multi-channel electronic circuit breaker with IO-Link interface for protecting four loads at 24 V DC in the event of overload and short circuit. With electronic locking of the set nominal currents. For installation on DIN rails.
PTCB E1 24DC/2A NO - Electronic circuit breaker
2909903
1-channel, electronic circuit breaker for protecting loads at 24 V DC against overload and short circuit. Easy potential distribution with components from the CLIPLINE complete terminal block system. With fixed nominal current. For installation on DIN rails.
PTCB E1 24DC/1A NO - Electronic circuit breaker
2909902
1-channel, electronic circuit breaker for protecting loads at 24 V DC against overload and short circuit. Easy potential distribution with components from the CLIPLINE complete terminal block system. With fixed nominal current. For installation on DIN rails.
CAPAROC CR EXT4 - Busbar
1110991
Extension busbar with 4 slots for the CAPAROC system. For installation on a DIN rail.
PTCB E1 24DC/6A NO - Electronic circuit breaker
2909908
1-channel, electronic circuit breaker for protecting loads at 24 V DC against overload and short circuit. Easy potential distribution with components from the CLIPLINE complete terminal block system. With fixed nominal current. For installation on DIN rails.
PTCB E1 24DC/8A NO - Electronic circuit breaker
2909910
1-channel, electronic circuit breaker for protecting loads at 24 V DC against overload and short circuit. Easy potential distribution with components from the CLIPLINE complete terminal block system. With fixed nominal current. For installation on DIN rails.
CAPAROC PM PN - Feed-in module
1110986
Power module with PROFINET interface for supplying the CAPAROC circuit breaker system with 12 or 24 V DC. Additional system interface for communication with the power supply. For DIN rail installation via the CAPAROC current rails.
PTCB E1 24DC/1-3A NO - Electronic circuit breaker
2909909
1-channel, electronic circuit breaker for protecting loads at 24 V DC against overload and short circuit. Easy potential distribution with components from the CLIPLINE complete terminal block system. With electronic interlock of the set nominal currents. For installation on DIN rails.
CBMC E4 24DC/1-10A S-R - Electronic circuit breaker
1065729
Multi-channel electronic circuit breaker for protecting four loads at 24 V DC in the event of overload or short circuit. With status output, reset input, and electronic locking of the set nominal currents. For installation on DIN rails.
CAPAROC E2 12-24DC/2-10A - Electronic circuit breaker
1110984
2-channel electronic circuit breaker module for protecting loads at 12 and 24 V DC against overload and short circuit with current limit. Nominal current adjustable from 2 A to 10 A using step switch. For DIN rail installation via the CAPAROC current rails.
PTCB E1 24DC/4A SI-R - Electronic circuit breaker
1135745
1-channel, electronic fuse for protecting 24 V loads. Easy potential distribution with terminal blocks from the CLIPLINE complete system. With status output, reset input, and electronic interlock. For installation on DIN rails.
CAPAROC E1 12-24DC/12-20A - Electronic circuit breaker
1115663
1-channel electronic circuit breaker module for protecting loads at 12 and 24 V DC against overload and short circuit with current limit. Nominal current adjustable from 12 A to 20 A using step switch. For DIN rail installation via the CAPAROC current rails.
CAPAROC E1 12-24DC/16A - Electronic circuit breaker
1115666
1-channel electronic circuit breaker module for protecting loads at 12 and 24 V DC against overload and short circuit with current limit. Fixed nominal current of 16 A. For DIN rail installation via the CAPAROC current rails.
CAPAROC E1 12-24DC/12A - Electronic circuit breaker
1524929
1-channel electronic circuit breaker module for protecting loads at 12 and 24 V DC against overload and short circuit with current limit. Fixed nominal current of 12 A. For DIN rail installation via the CAPAROC current rails.
CAPAROC E1 12-24DC/20A - Electronic circuit breaker
1524930
1-channel electronic circuit breaker module for protecting loads at 12 and 24 V DC against overload and short circuit with current limit. Fixed nominal current of 20 A. For DIN rail installation via the CAPAROC current rails.
PTCB E1 48DC/2A NO - Electronic circuit breaker
1471918
Single-channel, electronic device protection for 48 V DC loads. Fixed nominal current of 2 A. With floating remote indication contact. Can be combined with CLIPLINE terminal blocks. For installation on DIN rails.
PTCB E1 24DC/3A NO - Electronic circuit breaker
2909904
1-channel, electronic circuit breaker for protecting loads at 24 V DC against overload and short circuit. Easy potential distribution with components from the CLIPLINE complete terminal block system. With fixed nominal current. For installation on DIN rails.
CAPAROC E4 12-24DC/1-4A - Electronic circuit breaker
1115657
Four-channel electronic circuit breaker module for protecting 12 and 24 V DC loads against overload and short circuit. Nominal current adjustable from 1 A to 4 A via LED button. For DIN rail installation via the CAPAROC current rails.
PTCB E1 24DC/0.1-0.63A SI-R - Electronic circuit breaker
1441496
Single-channel, electronic device protection for 12-24 V DC loads. Nominal current adjustable from 0.1-0.63 A. With remote signaling, remote reset, and active current limitation. Can be combined with CLIPLINE terminal blocks. For installation on DIN rails.
EC-E1 2A - Electronic circuit breaker
903024
Electronic circuit breaker, signal contact: 1 N/O contact, nominal current: 2 A
CBMC EG4 24DC/1-8A NO - Electronic circuit breaker
1065730
Multi-channel electronic circuit breaker with electrical isolation for protecting four loads at 24 V DC in the event of overload or short circuit. With electronic locking of the set nominal currents. For installation on DIN rails.
PTCB E1 24DC/0.1-0.63A NO - Electronic circuit breaker
1441495
Single-channel, electronic device protection for 12-24 V DC loads. Nominal current adjustable from 0.1-0.63 A. With remote signaling and active current limitation. Can be combined with CLIPLINE terminal blocks. For installation on DIN rails.
CAPAROC CR EXT8 - Busbar
1110990
Extension busbar with 8 slots for CAPAROC system. For installation on a DIN rail.
CBB TM 04 2X2RC P-PT - Potential distributors
2801481
Device circuit breaker boards for four CB TM1... thermal-magnetic circuit breakers with group remote signaling, central supply, and potential distribution for up to five loads per channel.
EC-E1 0,5A - Electronic circuit breaker
903022
Electronic circuit breaker, signal contact: 1 N/O contact, nominal current: 0.5 A
CBMC E4 24DC/1-4A S-R - Electronic circuit breaker
1065727
Multi-channel electronic circuit breaker for protecting four loads at 24 V DC in the event of overload or short circuit. With status output, reset input, and electronic locking of the set nominal currents. For installation on DIN rails.
EC-E1 10A - Electronic circuit breaker
903030
Electronic circuit breaker, signal contact: 1 N/O contact, nominal current: 10 A
FBST 500 TMC-N GY - Continuous plug-in bridge
901028
Continuous plug-in bridge, mounting type: Plug-in mounting
PTCB E1 24DC/6A SI-R - Electronic circuit breaker
1135740
1-channel, electronic fuse for protecting 24 V loads. Easy potential distribution with terminal blocks from the CLIPLINE complete system. With status output, reset input, and electronic interlock. For installation on DIN rails.
PTCB E1 24DC/2A SI-R - Electronic circuit breaker
1135749
1-channel, electronic fuse for protecting 24 V loads. Easy potential distribution with terminal blocks from the CLIPLINE complete system. With status output, reset input, and electronic interlock. For installation on DIN rails.
EC-E 1A DC24V - Electronic circuit breaker
903042
Electronic circuit breaker, 1 reset input, nominal current: 1 A
PTCB E1 24DC/8A SI-R - Electronic circuit breaker
1135734
1-channel, electronic fuse for protecting 24 V loads. Easy potential distribution with terminal blocks from the CLIPLINE complete system. With status output, reset input, and electronic interlock. For installation on DIN rails.
CAPAROC CR CON - Metal part
1270955
Metal extension rails from connecting CAPAROC initial busbars.
PTCB E1 24DC/1-8A NO2 - Electronic circuit breaker
1388391
1-channel, electronic circuit breaker for protecting loads at 24 V DC against overload and short circuit. Easy potential distribution with components from the CLIPLINE complete terminal block system. With electronic interlock of the set nominal currents. The signal contact opens if the channel has been switched off manually or due to a fault. For installation on DIN rails.
PTCB E1 24DC/1-4A SI-R - Electronic circuit breaker
1135753
1-channel, electronic fuse for protecting 24 V loads. Easy potential distribution with terminal blocks from the CLIPLINE complete system. With status output, reset input, and electronic interlock. For installation on DIN rails.
EC-E1 12A - Electronic circuit breaker
903031
Electronic circuit breaker, signal contact: 1 N/O contact, nominal current: 12 A
CAPAROC E2 12-24DC/1-4A - Electronic circuit breaker
1115655
2-channel electronic circuit breaker module for protecting loads at 12 and 24 V DC against overload and short circuit with current limit. Nominal current adjustable from 1 A to 4 A using step switch. For DIN rail installation via the CAPAROC current rails.
PTCB E1 24DC/0.5A SI-R - Electronic circuit breaker
1361043
Single-channel, electronic device protection for 12-24 V DC loads. Fixed nominal current value: 0.5 A. With remote signaling, remote reset, and active current limitation. Can be combined with CLIPLINE terminal blocks. For installation on DIN rails.
EC-E1 1A - Electronic circuit breaker
903023
Electronic circuit breaker, signal contact: 1 N/O contact, nominal current: 1 A
PTCB E1 24DC/0.1A SI-R - Electronic circuit breaker
1464483
Single-channel, electronic device protection for 12-24 V DC loads. Fixed nominal current value: 0.1 A. With remote signaling, remote reset, and active current limitation. Can be combined with CLIPLINE terminal blocks. For installation on DIN rails.
CAPAROC PM IOL - Feed-in module
1115670
Power module with IO-Link interface for supplying the CAPAROC circuit breaker system with 12 or 24 V DC for up to 20 channels. For DIN rail installation via the CAPAROC current rails.
CAPAROC PM S-R EX - Feed-in module
1344363
Power module with status output and reset input for supplying the CAPAROC circuit breaker system with 12 V DC or 24 V DC. EX e approval for zone 2. For DIN rail installation via the CAPAROC current rails.
EC-E1 4A - Electronic circuit breaker
903026
Electronic circuit breaker, signal contact: 1 N/O contact, nominal current: 4 A
CBB TM 08 2X4RC P-PT - Potential distributors
2801482
Device circuit breaker boards for eight CB TM1... thermal-magnetic circuit breakers with group remote signaling, central supply, and potential distribution for up to five loads per channel.
EC-E 4A DC24V - Electronic circuit breaker
903045
Electronic circuit breaker, 1 reset input, nominal current: 4 A
CAPAROC E1 12-24DC/1-10A - Electronic circuit breaker
1115649
1-channel electronic circuit breaker module for protecting 12 and 24 V DC loads against overload and short circuit. Nominal current adjustable from 1 A to 10 A via LED button. For DIN rail installation via the CAPAROC current rails.
CAPAROC E2 12-24DC/2-10A EX - Electronic circuit breaker
1344364
2-channel electronic circuit breaker module for protecting 12 V DC and 24 V DC loads against overload and short circuit. Nominal current adjustable from 2 A to 10 A via step switch. EX e approval for zone 2. For DIN rail installation via the CAPAROC current rails.
CAPAROC E1 12-24DC/6A - Electronic circuit breaker
1157286
1-channel electronic circuit breaker module for protecting 12 and 24 V DC loads against overload and short circuit. With fixed nominal current. For DIN rail installation via the CAPAROC current rails.
EC 1 12DC/3A S-R - Electronic circuit breaker
3000762
Electronic circuit breaker, reset input and status output, nominal current: 3 A
CAPAROC E2 12-24DC/1-4A EX - Electronic circuit breaker
1344361
2-channel electronic circuit breaker module for protecting 12 V DC and 24 V DC loads against overload and short circuit. Nominal current adjustable from 1 A to 4 A via step switch. EX e approval for zone 2. For DIN rail installation via the CAPAROC current rails.
CBMC E4 24DC/1-4A+ IOL - Electronic circuit breaker
2910410
Multi-channel electronic circuit breaker with IO-Link interface for protecting four loads at 24 V DC in the event of overload and short circuit. With electronic locking of the set nominal currents. For installation on DIN rails.
CAPAROC CR EXT20 - Busbar
1115674
Extension busbar with 20 slots for the CAPAROC system. For installation on a DIN rail.
PTCB E1 24DC/1A SI-R - Electronic circuit breaker
1135751
1-channel, electronic fuse for protecting 24 V loads. Easy potential distribution with terminal blocks from the CLIPLINE complete system. With status output, reset input, and electronic interlock. For installation on DIN rails.
Customizable
CBMC E4 24DC/1-10A S-R-C - Electronic circuit breaker
1103875
Multi-channel electronic circuit breaker that can be preconfigured, for protecting four loads at 24 V DC in the event of overload and short circuit. With status output, reset input, and electronic locking of the set nominal currents. For installation on DIN rails.
PTCB E1 24DC/0.2A SI-R - Electronic circuit breaker
1361049
Single-channel, electronic device protection for 12-24 V DC loads. Fixed nominal current value: 0.2 A. With remote signaling, remote reset, and active current limitation. Can be combined with CLIPLINE terminal blocks. For installation on DIN rails.
EC-E4 12A - Electronic circuit breaker
903039
Electronic circuit breaker, signal contact: 1 N/C contact, nominal current: 12 A
EC-E 2A DC24V - Electronic circuit breaker
903043
Electronic circuit breaker, 1 reset input, nominal current: 2 A
EC-E4 6A - Electronic circuit breaker
903036
Electronic circuit breaker, signal contact: 1 N/C contact, nominal current: 6 A
EC-E4 1A - Electronic circuit breaker
903032
Electronic circuit breaker, signal contact: 1 N/C contact, nominal current: 1 A
EC-E 6A DC24V - Electronic circuit breaker
903046
Electronic circuit breaker, 1 reset input, nominal current: 6 A
CBB TM 12 2X6RC P-PT - Potential distributors
2801483
Device circuit breaker boards for twelve CB TM1... thermal-magnetic circuit breakers with group remote signaling, central supply, and potential distribution for up to five loads per channel.
CAPAROC E1 12-24DC/8A - Electronic circuit breaker
1157279
1-channel electronic circuit breaker module for protecting 12 and 24 V DC loads against overload and short circuit. With fixed nominal current. For DIN rail installation via the CAPAROC current rails.
TMCP CONNECT LR - End cover
916592
End cover
CBB 04 2X2RC-PT - Potential distributors
2905238
Device circuit breaker boards for four thermal-magnetic (CB TM1...) or electronic (CB E1... NO) circuit breakers with group remote signaling, central supply, connection for relay contacts, and potential distribution for up to four loads per channel.
PTCB E1 24DC/0.5A NO - Electronic circuit breaker
1361051
Single-channel, electronic device protection for 12-24 V DC loads. Fixed nominal current value: 0.5 A. With remote signaling and active current limitation. Can be combined with CLIPLINE terminal blocks. For installation on DIN rails.
EC-E4 4A - Electronic circuit breaker
903035
Electronic circuit breaker, signal contact: 1 N/C contact, nominal current: 4 A
FBST 21-PLC GY - Single plug-in bridge
901015
Single plug-in bridge, length: 21 mm, color: gray
EC-E 0,5A DC24V - Electronic circuit breaker
903041
Electronic circuit breaker, 1 reset input, nominal current: 0.5 A
CAPAROC E1 12-24DC/4A - Electronic circuit breaker
1157285
1-channel electronic circuit breaker module for protecting 12 and 24 V DC loads against overload and short circuit. With fixed nominal current. For DIN rail installation via the CAPAROC current rails.
PTCB E1 24DC/0.63A SI-R - Electronic circuit breaker
1464485
Single-channel, electronic device protection for 12-24 V DC loads. Fixed nominal current value: 0.63 A. With remote signaling, remote reset, and active current limitation. Can be combined with CLIPLINE terminal blocks. For installation on DIN rails.
EC-E 8A DC24V - Electronic circuit breaker
903047
Electronic circuit breaker, 1 reset input, nominal current: 8 A
EC 1 12DC/1A S-R - Electronic circuit breaker
3000760
Electronic circuit breaker, reset input and status output, nominal current: 1 A
PTCB E1 24DC/0.63A NO - Electronic circuit breaker
1464486
Single-channel, electronic device protection for 12-24 V DC loads. Fixed nominal current value: 0.63 A. With remote signaling and active current limitation. Can be combined with CLIPLINE terminal blocks. For installation on DIN rails.
CB RC BRIDGE - Bridge
2801616
Bridge plug for bridging contacts 11 to 14 for CB base elements
EC-E 12A DC24V - Electronic circuit breaker
903049
Electronic circuit breaker, 1 reset input, nominal current: 12 A
CBB 12 2X6RC-PT - Potential distributors
2905241
Device circuit breaker boards for twelve thermal-magnetic (CB TM1...) or electronic (CB E1... NO) circuit breakers with group remote signaling, central supply, connection for relay contacts, and potential distribution for up to four loads per channel.
EC 1 12DC/2A S-R - Electronic circuit breaker
3000761
Electronic circuit breaker, reset input and status output, nominal current: 2 A
Customizable
CBMC E4 24DC/1-4A NO-C - Electronic circuit breaker
2908713
Multi-channel electronic circuit breaker that can be preconfigured, for protecting four loads at 24 V DC in the event of overload and short circuit. With electronic locking of the set nominal currents. For installation on DIN rails.
CAPAROC E1 12-24DC/10A - Electronic circuit breaker
1157284
1-channel electronic circuit breaker module for protecting 12 and 24 V DC loads against overload and short circuit. With fixed nominal current. For DIN rail installation via the CAPAROC current rails.
FBST 500 TMCP - Continuous plug-in bridge
916615
Continuous plug-in bridge
EC-E 3A DC24V - Electronic circuit breaker
903044
Electronic circuit breaker, 1 reset input, nominal current: 3 A
Customizable
CBMC EG4 24DC/1-8A NO-C - Electronic circuit breaker
1449883
Multi-channel electronic circuit breaker with electrical isolation for protecting four loads at 24 V DC in the event of overload or short circuit. With electronic locking of the set nominal currents. For installation on DIN rails.
TMCP SB - Bridge
916602
Signal bridge, pluggable, for bridging group signaling when there is a free slot on the TMCP SOCKET M socket
EC 1 12DC/6A S-R - Electronic circuit breaker
3000765
Electronic circuit breaker, reset input and status output, nominal current: 6 A
EC-E4 2A - Electronic circuit breaker
903033
Electronic circuit breaker, signal contact: 1 N/C contact, nominal current: 2 A
EC-E1 3A - Electronic circuit breaker
903025
Electronic circuit breaker, signal contact: 1 N/O contact, nominal current: 3 A
CBB 08 2X4RC-PT - Potential distributors
2905240
Device circuit breaker boards for eight thermal-magnetic (CB TM1...) or electronic (CB E1... NO) circuit breakers with group remote signaling, central supply, connection for relay contacts, and potential distribution for up to four loads per channel.
PTCB E1 24DC/0.2A NO - Electronic circuit breaker
1361055
Single-channel, electronic device protection for 12-24 V DC loads. Fixed nominal current value: 0.2 A. With remote signaling and active current limitation. Can be combined with CLIPLINE terminal blocks. For installation on DIN rails.
PTCB E1 24DC/0.1A NO - Electronic circuit breaker
1464484
Single-channel, electronic device protection for 12-24 V DC loads. Fixed nominal current value: 0.1 A. With remote signaling and active current limitation. Can be combined with CLIPLINE terminal blocks. For installation on DIN rails.
EC-E4 3A - Electronic circuit breaker
903034
Electronic circuit breaker, signal contact: 1 N/C contact, nominal current: 3 A
CAPAROC E1 12-24DC/1-4A - Electronic circuit breaker
1115415
1-channel electronic circuit breaker module for protecting 12 and 24 V DC loads against overload and short circuit. Nominal current adjustable from 1 A to 4 A via LED button. For DIN rail installation via the CAPAROC current rails.
EC 1 12DC/4A S-R - Electronic circuit breaker
3000763
Electronic circuit breaker, reset input and status output, nominal current: 4 A
Customizable
CBMC E4 24DC/1-10A NO-C - Electronic circuit breaker
2908716
Multi-channel electronic circuit breaker that can be preconfigured, for protecting four loads at 24 V DC in the event of overload and short circuit. With electronic locking of the set nominal currents. For installation on DIN rails.
EC 1 12DC/10A S-R - Electronic circuit breaker
3000766
Electronic circuit breaker, reset input and status output, nominal current: 10 A
EC-E4 10A - Electronic circuit breaker
903038
Electronic circuit breaker, signal contact: 1 N/C contact, nominal current: 10 A
CAPAROC E1 12-24DC/2A - Electronic circuit breaker
1157290
1-channel electronic circuit breaker module for protecting 12 and 24 V DC loads against overload and short circuit. With fixed nominal current. For DIN rail installation via the CAPAROC current rails.
TMCP SOCKET M - Surface mounting housing
916589
Modular socket element, 2-position, for holding two circuit breakers, each with a single position
CB S-BE - Base element
2905067
Solder base element for PCB mounting for accommodating CB TM... or CB E... device circuit breakers
EC-E1 8A - Electronic circuit breaker
903029
Electronic circuit breaker, signal contact: 1 N/O contact, nominal current: 8 A
EC-E1 6A - Electronic circuit breaker
903028
Electronic circuit breaker, signal contact: 1 N/O contact, nominal current: 6 A
Customizable
CAPAROC - Electronic circuit breaker
1290013
Customizable electronic circuit breaker system for protecting loads at 12 and 24 V DC. Configured from power modules, circuit breakers, and potential distributor modules. For DIN rail installation via the CAPAROC current rails.
EC-E4 8A - Electronic circuit breaker
903037
Electronic circuit breaker, signal contact: 1 N/C contact, nominal current: 8 A
Customizable
CBMC E4 24DC/1-4A S-R-C - Electronic circuit breaker
1103876
Multi-channel electronic circuit breaker that can be preconfigured, for protecting four loads at 24 V DC in the event of overload and short circuit. With status output, reset input, and electronic locking of the set nominal currents. For installation on DIN rails.
EC-E4 0,5A - Electronic circuit breaker
903040
Electronic circuit breaker
EC-E 10A DC24V - Electronic circuit breaker
903048
Electronic circuit breaker, 1 reset input, nominal current: 10 A
CAPAROC E1 12-24DC/1A - Electronic circuit breaker
1157288
1-channel electronic circuit breaker module for protecting 12 and 24 V DC loads against overload and short circuit. With fixed nominal current. For DIN rail installation via the CAPAROC current rails.
CB E1 24DC/1A NO P - Electronic circuit breaker
2800901
Electronic circuit breaker, 1-pos., active current limitation, 1 N/O contact, plug for base element.
CB E1 24DC/2A NO P - Electronic circuit breaker
2800902
Electronic circuit breaker, 1-pos., active current limitation, 1 N/O contact, plug for base element.
CB E1 24DC/10A NO P - Electronic circuit breaker
2800907
Electronic circuit breaker, 1-pos., active current limitation, 1 N/O contact, plug for base element.
CB E1 24DC/10A S-C P - Electronic circuit breaker
2800928
Electronic circuit breaker, 1-pos., active current limitation, status output and control input, plug for base element.
CB E1 24DC/2A S-C P - Electronic circuit breaker
2800923
Electronic circuit breaker, 1-pos., active current limitation, status output and control input, plug for base element.
CB E1 24DC/6A NO P - Electronic circuit breaker
2800905
Electronic circuit breaker, 1-pos., active current limitation, 1 N/O contact, plug for base element.
CB E1 24DC/3A S-R P - Electronic circuit breaker
2800910
Electronic circuit breaker, 1-pos., active current limitation, status output and reset input, plug for base element.
CB E1 24DC/3A NC P - Electronic circuit breaker
2800917
Electronic circuit breaker, 1-pos., active current limitation, 1 N/C contact, plug for base element.
CB E1 24DC/3A NO P - Electronic circuit breaker
2800903
Electronic circuit breaker, 1-pos., active current limitation, 1 N/O contact, plug for base element.
CB E1 24DC/4A NO P - Electronic circuit breaker
2800904
Electronic circuit breaker, 1-pos., active current limitation, 1 N/O contact, plug for base element.
CB E1 24DC/1A S-R P - Electronic circuit breaker
2800908
Electronic circuit breaker, 1-pos., active current limitation, status output and reset input, plug for base element.
CB E1 24DC/1A NC P - Electronic circuit breaker
2800915
Electronic circuit breaker, 1-pos., active current limitation, 1 N/C contact, plug for base element.
CB E1 24DC/2A NC P - Electronic circuit breaker
2800916
Electronic circuit breaker, 1-pos., active current limitation, 1 N/C contact, plug for base element.
CB E1 24DC/4A NC P - Electronic circuit breaker
2800918
Electronic circuit breaker, 1-pos., active current limitation, 1 N/C contact, plug for base element.
CB E1 24DC/4A S-C P - Electronic circuit breaker
2800925
Electronic circuit breaker, 1-pos., active current limitation, status output and control input, plug for base element.
CB E1 24DC/8A NO P - Electronic circuit breaker
2800906
Electronic circuit breaker, 1-pos., active current limitation, 1 N/O contact, plug for base element.
CB E1 24DC/4A S-R P - Electronic circuit breaker
2800911
Electronic circuit breaker, 1-pos., active current limitation, status output and reset input, plug for base element.
CB E1 24DC/8A S-R P - Electronic circuit breaker
2800913
Electronic circuit breaker, 1-pos., active current limitation, status output and reset input, plug for base element.
CB E1 24DC/1A S-C P - Electronic circuit breaker
2800922
Electronic circuit breaker, 1-pos., active current limitation, status output and control input, plug for base element.
CB E1 24DC/10A S-R P - Electronic circuit breaker
2800914
Electronic circuit breaker, 1-pos., active current limitation, status output and reset input, plug for base element.
CB E1 24DC/8A S-C P - Electronic circuit breaker
2800927
Electronic circuit breaker, 1-pos., active current limitation, status output and control input, plug for base element.
CB E1 24DC/3A S-C P - Electronic circuit breaker
2800924
Electronic circuit breaker, 1-pos., active current limitation, status output and control input, plug for base element.
CB E1 24DC/2A S-R P - Electronic circuit breaker
2800909
Electronic circuit breaker, 1-pos., active current limitation, status output and reset input, plug for base element.
CB E1 24DC/6A S-C P - Electronic circuit breaker
2800926
Electronic circuit breaker, 1-pos., active current limitation, status output and control input, plug for base element.
CB E1 24DC/6A S-R P - Electronic circuit breaker
2800912
Electronic circuit breaker, 1-pos., active current limitation, status output and reset input, plug for base element.
ECP-LOCK - Metal part
912021
Spring lock, for mechanical locking in the case of overhead mounting, 1-pos.
CB E1 24DC/6A NC P - Electronic circuit breaker
2800919
Electronic circuit breaker, 1-pos., active current limitation, 1 N/C contact, plug for base element.