Surge arrester for 1000 V DC isolated voltage systems, DIN rail mounting, 5 pos. base element with remote signaling contact, 5 pos. plug-in temperature-controlled protective plug modules with status message on each plug, used for arresters with three parallel strings/maximum power point trackers (MPPT).
Height | 98.57 mm |
Width | 89 mm |
Depth | 64.7 mm |
Degree of protection | IP20 (only when all terminal points are used) |
Ambient temperature (operation) | -40 °C ... 85 °C |
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Altitude | ≤ 4000 mm |
Permissible humidity (operation) | 5 % ... 95 % |
Shock (operation) | (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
Vibration (operation) | 2g (5-500 Hz/2.5 h/XYZ) |
IEC test classification | PV II |
PV T2 | |
EN type | T2 |
SPD failure behavior | OCM |
Installation location | Interior zone |
Accessibility | Accessible |
Installation location of the disconnect device | Internal |
Mode of protection | (L+) - (L-) |
(L+) - PE | |
(L-) - PE | |
Mounting type | DIN rail: 35 mm |
Color | jet black RAL 9005 |
Housing material | PA 6.6-FR |
PBT-FR | |
Degree of pollution | 2 |
Flammability rating according to UL 94 | V-0 |
Type | DIN rail module, two-section, divisible |
Surge protection fault message | Optical, remote indicator contact |
Maximum continuous operating voltage UCPV | 1170 V DC |
Short-circuit current rating ISCPV | 2000 A |
Rated load current IL | 80 A |
Residual current IPE | ≤ 250 µA AC |
≤ 20 µA DC | |
Nominal discharge current (8/20) µs | 20 kA |
Maximum discharge current Imax (8/20) µs | 40 kA |
Voltage protection level Up | ≤ 3.8 kV |
Response time tA | ≤ 25 ns |
Insulation resistance Riso | > 5 GΩ (at 500 V DC) |
Switching function | PDT contact |
Operating voltage | 125 V AC |
30 V DC | |
Operating current | 3 A AC |
3 A DC | |
Screw thread | M2 |
Tightening torque | 0.25 Nm |
Stripping length | 7 mm |
Conductor cross section flexible | 0.14 mm² ... 1.5 mm² |
Conductor cross section solid | 0.14 mm² ... 1.5 mm² |
Conductor cross section AWG | 28 ... 16 |
Screw thread | M5 |
Tightening torque | 4.5 Nm |
Stripping length | 16 mm |
Conductor cross section flexible | 1.5 mm² ... 25 mm² |
Conductor cross section solid | 1.5 mm² ... 35 mm² |
Conductor cross section AWG | 15 ... 2 |
Conductor cross section AWG | 30 ... 14 |
Conductor cross section AWG | 10 ... 2 |
Standards/regulations | EN 50539-11 |
eCl@ss 4.0 | 27140201 |
eCl@ss 4.1 | 27130801 |
eCl@ss 5.0 | 27130801 |
eCl@ss 5.1 | 27130801 |
eCl@ss 6.0 | 27130800 |
eCl@ss 7.0 | 27130805 |
eCl@ss 8.0 | 27130805 |
eCl@ss 9.0 | 27130805 |
ETIM 3.0 | EC000941 |
ETIM 4.0 | EC000941 |
ETIM 5.0 | EC000941 |
ETIM 6.0 | EC000941 |
ETIM 7.0 | EC000941 |
UNSPSC 6.01 | 30212010 |
UNSPSC 7.0901 | 39121610 |
UNSPSC 11 | 39121610 |
UNSPSC 12.01 | 39121610 |
UNSPSC 13.2 | 39121620 |