Chống sét lan truyền Phoenix Contact TTC-6P-3-HF-F-M-12DC-PT-I - 2906796

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm PHOENIX CONTACT

• Xem thêm

Chống sét lan truyền Phoenix Contact TTC-6P-3-HF-F-M-12DC-PT-I - 2906796

 

Technical Data

Product properties

IEC test classification	C1
	C2
	C3
	D1
Type	DIN rail module, two-section, divisible
Product type	Surge protection for information technology
Product family	TERMITRAB complete
Insulation characteristics
Overvoltage category	III
Pollution degree	2

 

Electrical properties

Nominal voltage UN

12 V DC

 

Connection data

Connection method	Push-in connection
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section rigid	0.2 mm² ... 4 mm²
Conductor cross section AWG	24 ... 12

 

Ex data

Maximum input current	600 mA (T4 / ≤ 30 °C)
	500 mA (T4 / > 30 °C ... ≤ 50 °C)
	400 mA (T4 / > 50 °C ... ≤ 70 °C)
Maximum input voltage	15 V DC
Altitude	≤ 2000 m (amsl)
Ambient temperature (operation)	-40 °C ... 70 °C (T4)

 

Dimensions

Dimensional drawing
Width	6.2 mm +0.1 mm
Height	105.8 mm
Depth	100 mm (incl. DIN rail 7.5 mm)

 

Material specifications

Flammability rating according to UL 94	V-0
Insulating material	PBT
Housing material	PBT

 

Mechanical properties

Mechanical data
Open side panel	No

 

Protective circuit

Direction of action	Line-Line & Line-Signal Ground/Shield & optional Signal Ground/Shield-Earth Ground
Maximum continuous voltage UC	15 V DC
	10 V AC
Rated current	600 mA (56 °C)
Operating effective current IC at UC	≤ 100 µA
Residual current IPE	≤ 1 µA
Nominal discharge current In (8/20) µs (line-line)	5 kA
Nominal discharge current In (8/20) µs (line-ground)	5 kA
Nominal discharge current In (8/20) µs (line-signal ground)	5 kA
Pulse discharge current Iimp (10/350) µs (line-line)	0.5 kA
Pulse discharge current Iimp (10/350) µs (line-earth)	0.5 kA
Pulse discharge current Iimp (10/350) µs (line-signalground)	0.5 kA
Total discharge current Itotal (8/20) µs	10 kA
Voltage protection level Up (line-line)	≤ 145 V (C1 - 1 kV / 500 A)
	≤ 260 V (C2 - 10 kV / 5 kA)
	≤ 25 V (C3 - 25 A)
	≤ 30 V (C3 - 100 A)
Voltage protection level Up (line-earth)	≤ 750 V (C1 - 1 kV / 500 A)
	≤ 750 V (C2 - 10 kV / 5 kA)
	≤ 1.1 kV (C3 - 25 A)
	≤ 1.2 kV (C3 - 100 A)
Voltage protection level Up (line-signalground)	≤ 80 V (C1 - 1 kV / 500 A)
	≤ 95 V (C2 - 10 kV / 5 kA)
	≤ 25 V (C3 - 25 A)
	≤ 30 V (C3 - 100 A)
Voltage protection level Up static (line-line)	≤ 40 V (C1 - 1 kV / 500 A)
	≤ 95 V (C2 - 10 kV / 5 kA)
Voltage protection level Up static (line-earth)	≤ 750 V (C1 - 1 kV / 500 A)
	≤ 750 V (C2 - 10 kV / 5 kA)
Voltage protection level Up static (line-signalground)	≤ 40 V (C1 - 1 kV / 500 A)
	≤ 95 V (C2 - 10 kV / 5 kA)
Response time tA (line-line)	≤ 1 ns
Response time tA (line-earth)	≤ 100 ns
Response time tA (line-signalground)	≤ 1 ns
Input attenuation aE, sym.	typ. 0.3 dB (≤ 8.7 MHz / 150 Ω)
Input attenuation aE, asym.	typ. 0.3 dB (≤ 10.5 MHz / 150 Ω)
Cut-off frequency fg (3 dB), sym. in 150 Ω system	typ. 60 MHz
Cut-off frequency fg (3 dB), asym. (signal ground) in 150 Ω system	typ. 60 MHz
Capacity (Core-Core)	typ. 32 pF
Capacity (line-signalground)	typ. 32 pF
Resistance per path	1.65 Ω ±20 %
Surge protection fault message	optical
Max. required back-up fuse	630 mA (FF)
Impulse durability (line-line)	C1 - 1 kV / 500 A
	C2 - 10 kV / 5 kA
	C3 - 100 A
Impulse durability (line-earth)	C1 - 1 kV / 500 A
	C2 - 10 kV / 5 kA
	C3 - 100 A
	D1 - 500 A
Impulse durability (line-signalground)	C1 - 1 kV / 500 A
	C2 - 10 kV / 5 kA
	C3 - 100 A
	D1 - 500 A
Pulse reset time (line-line)	≤ 30 ms
Pulse reset time (line-earth)	≤ 30 ms
Pulse reset time (line-signalground)	≤ 30 ms
Additional technical data
Max. total discharge current I total max (8/20) µs	20 kA (1x - non Ex)

 

Environmental and real-life conditions

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-40 °C ... 85 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Altitude	≤ 4000 m (amsl)
Permissible humidity (operation)	5 % ... 95 %

 

Standards and regulations

Standards/specifications	IEC 61643-21
EN 61643-21
Standards/specifications	EN 61643-21
Standards/specifications	IEC 60079-0
Standards/specifications	IEC 60079-7
Standards/specifications	EN IEC 60079-0
Standards/specifications	EN IEC 60079-7

 

Mounting

Mounting type

DIN rail: TH 35 - 7.5 mm

 

Commercial Data

Item number	2906796
Packing unit	1 pc
Minimum order quantity	1 pc
Product Key	CL2162
Catalog Page	Page 169 (C-4-2019)
GTIN	4055626135519
Weight per Piece (including packing)	52.6 g
Weight per Piece (excluding packing)	38.15 g
Customs tariff number	85363010
Country of origin	DE

 

Classifications

ECLASS

ECLASS-11.0	27130807
ECLASS-13.0	27171503

 

ETIM

ETIM 8.0

EC000943

 

UNSPSC

UNSPSC 21.0

39121600

 

Approvals

CSA

Approval ID: 70136717
 

DNV GL

Approval ID: TAE000027G
 

UL Listed

Approval ID: FILE E 138168
 

CSAus

Approval ID: 70136717
 

IECEx

Approval ID: IECEx BVS 21.0057X
 

ATEX

Approval ID: BVS 21 ATEX E 052 X

CCC

Approval ID: 2022122304116080
 

Environmental Product Compliance

REACh SVHC	Lead 7439-92-1
China RoHS	Environmentally Friendly Use Period = 50 years
	For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

- Tài liệu kỹ thuật Phoenix Contact TTC-6P-3-HF-F-M-12DC-PT-I - 2906796 ở đây.

 

Compatible Products

X-PEN 0,35 - 0811228
Marker pen
ZBF 6 CUS - 0825027
Zack Marker strip, flat
ZBF 6:UNBEDRUCKT - 0808710
Zack Marker strip, flat
ZBF 6/WH-100:UNBEDRUCKT - 0808736
Zack Marker strip, flat
ZBF 6,QR:FORTL.ZAHLEN - 0808765
Zack Marker strip, flat
CLIPFIX 35-5 - 3022276
End clamp
TTC-6-FMRS-PT - 2907811
Remote signaling set
SSA 3-6 - 2839295
Shield connection
SSA 5-10 - 2839512
Shield connection
TTC-6P-3-HF-12DC-I-P - 2907846
Surge protection plug
​

Tham khảo các model khác cùng loại:
Surge protection device
DT-LAN-CAT.6+ - 2881007
Surge protection in accordance with Class EA (CAT6A), for Gigabit Ethernet (up to 10 Gbps), token ring, FDDI/CDDI, ISDN, and DS1. Suitable for Power over Ethernet (PoE++ / 4PPoE) “Mode A” and “Mode B”. RJ45 attachment plug with separate grounding cable and ground connection snap-on foot for NS 35 DIN rails.

Surge protection device
D-LAN-CAT.5-FP - 2800723
Fine surge protection for data networks up to 1 Gbps. For use in Ethernet, Power over Ethernet (PoE, mode A and mode B), token ring, ISDN, and DS1. RJ45 attachment plug with separate grounding cable and snap-on foot for NS 35 DIN rails.

Surge protection device
TTC-6-3-HF-M-12DC-PT-I -2906732
Surge protection with integrated status indicator and knife disconnection for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply voltage (up to 90 Mbps).

Surge protection plug
PT 5-HF-12 DC-ST -2838775
Protective plug PT with HF protective circuit for 4 signal wires. Nominal voltage: 12 V DC

Surge protection device
PT 2-TELE -2882828
Surge protective device, consisting of plug and base element, for protecting a double wire from analog and digital telecommunications interfaces (VDSL up to 50 Mbps, on short paths (< 300 m) up to 100 Mbps).

Surge protection device
TTC-6P-3-HF-12DC-PT-I -1065313
Surge protection, consisting of protective plug and base element, with integrated status indicator for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply voltage.

Surge protection plug
PT 3-PB-ST -2858030
Surge protection plug for the base element, normal mode voltage coarse and fine protection for two floating signal wires in IT, common mode voltage coarse protection to ground.

Surge protection plug
PT 3-HF-12DC-ST -2858043
Surge protection plug for the base element, normal mode voltage coarse and fine protection for two floating signal wires and ground in IT, common mode voltage coarse protection to ground/earth. Design: 12 V DC

Surge protection plug
PT 2X2-FF-ST -2800755
PLUGTRAB, plug-in surge protection for Foundation Fieldbus

Surge protection device
PT-IQ-3-HF+F-12DC-UT - 2800995
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply voltage (up to 90 Mbps).

Surge protection device
TTC-6P-3-HF-M-12DC-UT-I -2906744
Surge protection, consisting of protective plug and base element, with integrated status indicator and knife disconnection for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply voltage, Ex e approval for zone 2.

Surge protection plug
PT 5-HF- 5 DC-ST - 2838762
Protective plug PT with HF protective circuit for 4 signal wires. Nominal voltage: 5 V DC

Surge protection device
DT-UFB-485/BS - 2920612
9-pos. D-SUB attachment plug with surge protection for RS-485 interfaces. Can alternatively be snapped onto DIN rails.

Surge protection device
D-UFB-PB - 2880642
Fine surge protection in a 9-pos. D-SUB plug for PROFIBUS-DP applications with a transmission speed of up to 12 Mbps.

Surge protection device
TTC-6P-3-HF-F-M-24DC-PT-I - 2906797
Surge protection, consisting of protective plug and base element, with integrated status indicator and knife disconnection for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply voltage. Indirect grounding via gas discharge tube, Ex e approval for zone 2.

Surge protection device
TTC-6P-3-HF-F-M-12DC-PT-I - 2906796
Surge protection, consisting of protective plug and base element, with integrated status indicator and knife disconnection for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply voltage. Indirect grounding via gas discharge tube, Ex e approval for zone 2.

Surge protection plug
PT 2X2-HF-24 DC-ST - 2839729
Protective plug PT with HF protective circuit for two 2-core floating signal circuits. Nominal voltage: 24 V DC

Surge protection device
TTC-6P-3-HF-F-M-12DC-UT-I - 2906786
Surge protection, consisting of protective plug and base element, with integrated status indicator and knife disconnection for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply voltage. Indirect grounding via gas discharge tube, Ex e approval for zone 2.

DT-UFB-V24/S-9-SB - Surge protection device
2803069
Attachment plug with surge protection for V.24 interface. Connection: D-SUB-9 plug/socket, installation in lines

PT-IQ-5-HF-5DC-PT - Surge protection device
2801291
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for five signal wires. For HF applications and telecommunications interfaces without supply voltage (up to 90 Mbps).

TTC-6-3-HF-F-M-12DC-UT-I - Surge protection device
2906769
Surge protection with integrated status indicator and knife disconnection for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply voltage (up to 90 Mbps). Indirect grounding via gas-filled surge arrester.

PT-IQ-5-HF+F-12DC-UT - Surge protection device
2800801
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for five signal wires. For HF applications and telecommunications interfaces without supply voltage (up to 90 Mbps).

D-LAN-CAT.5E-U - Surge protection device
2859084
Fine surge protection in accordance with Class D (CAT.5e), for token ring and Ethernet. RJ45 attachment plug with separate grounding cable and snap-on foot for NS 35/7.5 DIN rails

TTC-6P-3-HF-F-12DC-PT-I - Surge protection device
1065314
Surge protection, consisting of protective plug and base element, with integrated status indicator for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply voltage. Indirect grounding via gas-filled surge arrester.

TTC-6P-3-HF-M-12DC-PT-I - Surge protection device
2906756
Surge protection, consisting of protective plug and base element, with integrated status indicator and knife disconnection for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply voltage, Ex e approval for zone 2.

PT-IQ-3-PB-P - Surge protection plug
2800783
Surge protection plug with integrated multi-stage status indicator on the module for three signal wires. For HF applications. Nominal voltage: 5 V DC

MT-RS485 - Surge protection device
2762265
Rail-mountable module with surge voltage coarse and fine protection for RS-485 interface, for mounting on NS 35/7.5, housing width: 50 mm

TTC-6P-3-HF-F-M-EX-24DC-UT-I - Surge protection device
2906828
Surge protection with integrated status indicator and knife disconnection for a 3-wire Ex i signal circuit with common reference potential. For HF applications. Indirect grounding via gas discharge tube, HART-compatible. Suitable for use in the fieldbus system (e.g., PROFIBUS PA) in accordance with the FISCO concept, APL ready.

DT-TELE-SHDSL - Surge protection device
2801593
Attachment plug with surge protection for two SHDSL telecommunications interfaces (ports). Connection: RJ45 (RJ12/RJ11) and plug-in screw terminal block (COMBICON). Alternatively, can be snapped onto a DIN rail.

DT-TELE-RJ45 - Surge protection device
2882925
Attachment plug with surge protection for analog and digital telecommunications interfaces (VDSL up to 50 Mbps). Connection: RJ45 (RJ12/RJ11) and screw terminal block (COMBICON). Alternatively, can be snapped onto a DIN rail.

CT 10-TL - Disconnect strip
2765356
LSA-PLUS disconnect strip to hold the CTM and CT 10 protection modules. Version: 10 double conductors, dimension A: 124 mm.

PT 5-HF-24DC-ST - Surge protection device
2906002
PT protective plug with HF protective circuit for 4 signal wires. Nominal voltage: 24 V DC

D-LAN-CAT.5E - Surge protection device
2858991
Fine surge protection in accordance with Class D (CAT.5e), for token ring and Ethernet. RJ45 attachment plug with separate grounding cable, incl. RJ45 cable

PT-IQ-3-HF-12DC-PT - Surge protection device
2801288
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply voltage (up to 90 Mbps).

TTC-6-3-HF-F-M-EX-12DC-UT-I - Surge protection device
2906822
Surge protection with integrated status indicator and knife disconnection for a 3-wire Ex i signal circuit with common reference potential. For HF applications. Indirect grounding via gas-filled surge arrester, HART-compatible.

MNT-TAE D/WH - Type 3 surge protection device
2882394
Socket attachment plug with surge protection for the power supply and signal connection of an end device with analog or digital telecommunications interface (VDSL up to 50 Mbps, on short paths (< 300 m) up to 80 Mbps). Cable is included.

CTM 10-MAG - Magazine
2838610
Magazine with a grounding rail to accommodate up to 10 LSA-PLUS protective plugs (COMTRAB CTM), to insert in CT-TERMIBLOCK or LSA-PLUS disconnect strip

D-LAN-19"-D-P - Surge protection PCB
2880192
Replacement PCB for ""D-LAN-19""..."" products. Assembly with four surge-protected ports for data interfaces in acc. with Cat.5/EN 50 17 3 (100Base-T) incl. RJ45 connection sockets.

TTC-6-3-HF-F-M-EX-24DC-UT-I - Surge protection device
2906823
Surge protection with integrated status indicator and knife disconnection for a 3-wire Ex i signal circuit with common reference potential. For HF applications. Indirect grounding via gas discharge tube, HART-compatible. Suitable for use in the fieldbus system (e.g., PROFIBUS PA) in accordance with the FISCO concept, APL ready.

PT-IQ-5-HF+F-12DC-PT - Surge protection device
2801295
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for five signal wires. For HF applications and telecommunications interfaces without supply voltage (up to 90 Mbps).

CTM EST - Short-circuit connector
2838649
LSA-PLUS grounding plug (COMTRAB CTM) to short-circuit and ground potentials in CT-TERMIBLOCK... and disconnect strip CT 10...

CTM 2X1-180DC-GS-P - Surge protection plug
2838623
LSA-PLUS protective plug (COMTRAB CTM) with power cross and coarse surge protection for 2 signal lines. Nominal voltage: 180 V DC

C-UFB- 5DC/E 75 - Surge protection device
2763604
Attachment plug with surge voltage coarse and fine protection, for coaxial signal interfaces with floating shield, signal voltage 5 V. Connection: BNC socket/plug

PT-IQ-3-PB+F-UT - Surge protection device
2800994
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for three signal wires with common reference potential. Indirect grounding via gas-filled surge arrester. For HF applications and telecommunications interfaces without supply voltage (up to 90 Mbps).

TTC-6P-3-HF-F-M-24DC-UT-I - Surge protection device
2906787
Surge protection, consisting of protective plug and base element, with integrated status indicator and knife disconnection for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply voltage. Indirect grounding via gas discharge tube, Ex e approval for zone 2.

C-UFB- 5DC/E - Surge protection device
2782300
Attachment plug with surge voltage coarse and fine protection, for coaxial signal interfaces with floating shield, signal voltage 5 V. Connection: BNC socket/plug

TTC-6-3-HF-F-M-24DC-UT-I - Surge protection device
2906770
Surge protection with integrated status indicator and knife disconnection for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply voltage (up to 90 Mbps). Indirect grounding via gas-filled surge arrester.

PT-IQ-5-HF-5DC-UT - Surge protection device
2800797
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for five signal wires. For HF applications and telecommunications interfaces without supply voltage (up to 90 Mbps).

PT-IQ-1X2-TELE-PT - Surge protection device
2801290
Surge protective device, consisting of plug and base element, with integrated multi-stage status indicator on the module, for protecting a double wire for analog and digital telecommunications interfaces (VDSL up to 50 Mbps, on short paths (< 300 m) up to 100 Mbps).

PT-IQ-5-HF-5DC-P - Surge protection plug
2800795
Surge protection plug with integrated multi-stage status indicator on the module for five signal wires. For HF applications. Nominal voltage: 5 V DC

PT-IQ-5-HF-12DC-PT - Surge protection device
2801293
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for five signal wires. For HF applications and telecommunications interfaces without supply voltage (up to 90 Mbps).

TTC-6P-3-HF-12DC-I-P - Surge protection plug
2907846
Surge protection plug with integrated status indicator on the module for three signal wires. For HF applications. Nominal voltage: 12 V  DC

PT-IQ-3-HF+F-12DC-PT - Surge protection device
2801289
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply voltage (up to 90 Mbps).

SCT-D-SUB 9-KG - Housing
2749550
Cable housing for D-SUB-9

TTC-6P-3-HF-24DC-I-P - Surge protection plug
2907847
Surge protection plug with integrated status indicator on the module for three signal wires. For HF applications. Nominal voltage: 24 V  DC

CTM ISDN - Surge protection plug
2838555
LSA-PLUS plug (COMTRAB CTM) with protective circuit for 1 conductor pair of an ISDN So interface.

TTC-6-1X2-TELE-PT - Surge protection device
1077106
Surge protection for analog and digital telecommunications interfaces (VDSL up to 300 Mbps, G.fast up to 1.5 Gbps). Integrated overload protection (power-cross).

TTC-6P-3-HF-EX-24DC-I-P - Surge protection plug
2907834
Surge protection plug with integrated status indicator for a 3-wire Ex i signal circuit with common reference potential. For HF applications. Nominal voltage: 24 V DC

D-LAN-19"-16 - Surge protection device
2880147
19" rack with 16 surge protected ports for data interfaces in Ethernet (1000Base-T), Token Ring and FDDI/CDDI networks in acc. with Class D/EN 50173 (CAT5e), connection on the protective device: RJ45 sockets

D-LAN-19"-24 - Surge protection device
2838791
19" rack with 24 surge protected ports for data interfaces in Ethernet (1000Base-T), Token Ring and FDDI/CDDI networks in acc. with Class D/EN 50173 (CAT5e), connection on the protective device: RJ45 sockets

TTC-6-3-HF-12DC-PT - Surge protection device
1065316
Surge protection for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply voltage (up to 90 Mbps).

CT 1-10-ES - Grounding busbar
2765547
Ground rail for CTM protective plug when used in combination with LSA-PLUS disconnect strip. Version: 10 double conductors

PT 2X2-HF-12 DC-ST - Surge protection plug
2839570
Surge protection plug for the base element, normal mode voltage coarse and fine protection for two floating double wires in IT. Design: 12 V DC

TTC-6-3-HF-M-12DC-UT-I - Surge protection device
2906721
Surge protection with integrated status indicator and knife disconnection for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply voltage (up to 90 Mbps).

PT-IQ-3-HF-12DC-P - Surge protection plug
2800784
Surge protection plug with integrated multi-stage status indicator on the module for three signal wires. For HF applications. Nominal voltage: 12 V DC

CT 10-2/2-GS/3E-110AC - Magazine
2920829
LSA-PLUS coarse protection magazine for 10 double conductors, equipped with 10 three-electrode gas-filled surge arresters.

TTC-6P-3-HF-EX-12DC-I-P - Surge protection plug
2907833
Surge protection plug with integrated status indicator for a 3-wire Ex i signal circuit with common reference potential. For HF applications. Nominal voltage: 12 V DC

TTC-6-3-HF-F-24AC-PT-I - Surge protection device
1088786
Surge protection with integrated status indicator for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply voltage (up to 90 Mbps). Indirect grounding via gas discharge tube.

TTC-6P-3-HF-F-M-EX-12DC-UT-I - Surge protection device
2906826
Surge protection, consisting of protective plug and base element, with integrated status indicator and knife disconnection for a 3-wire Ex i signal circuit with common reference potential. For HF applications. Indirect grounding via gas-filled surge arrester, HART-compatible.

CTM 2X1-180DC-GS - Surge protection plug
2838636
LSA-PLUS protective plug (COMTRAB CTM) with coarse surge protection for 2 signal wires from analog and digital telecommunications interfaces (VDSL2). Nominal voltage: 180 V DC

MNT-TAE D - Type 3 surge protection device
2882381
Socket attachment plug with surge protection for the power supply and signal connection of an end device with analog or digital telecommunications interface (VDSL up to 50 Mbps, on short paths (< 300 m) up to 80 Mbps). Cable is included.

TTC-6-3-HF-F-M-12DC-PT-I - Surge protection device
2906778
Surge protection with integrated status indicator and knife disconnection for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply voltage (up to 90 Mbps). Indirect grounding via gas-filled surge arrester.

TTC-6-1X2-TELE-UT - Surge protection device
1077107
Surge protection for analog and digital telecommunications interfaces (VDSL up to 300 Mbps, G.fast up to 1.5 Gbps). Integrated overload protection (power-cross).

DT-UFB-IB-RB0 - Surge protection device
2800056
Attachment plug with surge protection for 5-conductor remote bus input. Connection: 9-pos. D-SUB socket - plug. Can alternatively be snapped onto DIN rails. Incl. 1 m cable with 9-pos. D-SUB connection.

PT-IQ-5-HF+F-5DC-PT - Surge protection device
2801292
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for five signal wires. For HF applications and telecommunications interfaces without supply voltage (up to 90 Mbps).

PT-IQ-3-PB-PT - Surge protection device
2801286
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply voltage (up to 90 Mbps).

PT 2-TELE-ST - Surge protection plug
2838733
Surge protection plug for base element, for protecting a double conductor of analog telecommunication interfaces.

D-LAN-CAT.5-HC - Surge protection device
2800763
Surge protection for data networks up to 1 Gbps. For use in Ethernet, Power over Ethernet (PoE, mode A and mode B), token ring, ISDN, and DS1. RJ45 attachment plug with separate grounding cable and snap-on foot for NS 35 DIN rails.

PT-IQ-1X2-TELE-P - Surge protection plug
2800782
Surge protection plug with integrated multi-stage status indicator on the module, for protecting a double wire from analog and digital telecommunications interfaces (up to 16 Mbps).

CT 10-2/2-GS/3E - Magazine
2765408
Coarse protection card cage CT, for holding 10 three-electrode gas-filled surge arresters, unequipped. Version: 10 double conductors

TTC-6-3-HF-F-M-24DC-PT-I - Surge protection device
2906779
Surge protection with integrated status indicator and knife disconnection for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply voltage (up to 90 Mbps). Indirect grounding via gas-filled surge arrester.

TAE-TRAB FM-NFN-AP - Surge protection device
2749628
TAE outlet box (NFN) for surface mounting with surge protection for analog and digital telecommunications interfaces (VDSL up to 50 Mbps, on short paths (< 300 m) up to 100 Mbps)

PT-IQ-5-HF-12DC-P - Surge protection plug
2800796
Surge protection plug with integrated multi-stage status indicator on the module for five signal wires. For HF applications. Nominal voltage: 12 V DC

DT-UFB-IB-RBI - Surge protection device
2800055
Attachment plug with surge protection for 5-conductor remote bus input. Connection: 9-pos. D-SUB plug - socket. Can alternatively be snapped onto DIN rails. Incl. 1 m cable with 9-pos. D-SUB connection.

SCT-D-SUB 15-KG - Housing
2749563
Cable housing for D-SUB-15

C-UFB-24DC/E - Surge protection device
2782313
Attachment plug with surge voltage coarse and fine protection, for coaxial signal interfaces with floating shield, signal voltage 24 V. Connection: BNC socket/plug

CT-TERMIBLOCK 10 DA - Screw termination block
0441711
Screw termination block with disconnect contacts for accommodating protective plugs CT and CTM. Use in MCR and telecommunications systems. Design: 10 double wires

D-LAN-19"-8 - Surge protection device
2880163
19" rack with 8 surge protected ports for data interfaces in Ethernet (1000Base-T), Token Ring and FDDI/CDDI networks in acc. with Class D/EN 50173 (CAT5e), connection on the protective device: RJ45 sockets

CT 10-2/2-GS - Magazine
2765398
Coarse protection magazine CT, for holding 20 2-electrode gas-filled surge arresters of type H, bare. Version: 10 double conductors

PT-IQ-3-HF-12DC-UT - Surge protection device
2800786
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply voltage (up to 90 Mbps).

PT-IQ-3-PB-UT - Surge protection device
2800785
Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply voltage (up to 90 Mbps).

MT-RS485-TTL - Surge protection device
2749398
Rail-mountable module with surge voltage coarse and fine protection for RS-485 interface, with TTL level, for mounting on NS 35/7.5, housing width: 50 mm

PT-IQ-1X2-TELE-UT - Surge protection device
2800769
Surge protective device, consisting of plug and base element, with integrated multi-stage status indicator on the module, for protecting a double wire for analog and digital telecommunications interfaces (VDSL up to 50 Mbps, on short paths (< 300 m) up to 100 Mbps).

MT-TTY-1 - Surge protection device
2763523
Rail-mountable module with surge protection for TTY interface, for mounting on NS 35/7.5, housing width: 30 mm