Omron E4PA-LS50-M1-N | Ultrasonic displacement sensor -Cảm biến chuyển vị siêu âm 50-500mm 100x100mm 380kHz 63ms 4-20mA 0-10V

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm OMRON

• 

  Các model Công tắc cơ khí chính xác của Baumer

• Xem thêm

Cảm biến chuyển vị siêu âm Omron E4PA-LS50-M1-N | Ultrasonic displacement sensor

(50-500mm 100x100mm 380kHz 63ms 4-20mA 0-10V)

 

Features

Phát hiện độ chính xác cao với một loạt các phép đo/ High-precision detection with a wide range of measurements.
Bốn loại Cảm biến có sẵn với khoảng cách phát hiện tối đa 0,5 m, 2 m, 4 m và 6 m. Với loại 0,5 m, độ chính xác lặp lại là 1 mm hoặc cao hơn đã đạt được/ Four types of Sensors are available with maximum sensing distances of 0.5 m, 2 m, 4 m, and 6 m. With the 0.5-m type, a repeat accuracy of 1 mm or better has been achieved.



Cảm biến là sóng siêu âm, vì vậy nó không bị ảnh hưởng bởi màu sắc của vật thể/ The Sensor is ultrasonic, so it is not affected by the color of objects.
Có thể đo nhiều loại vật liệu, bao gồm các vật thể trong suốt và phản chiếu. Các phép đo được thực hiện mà không cần tiếp xúc, vì vậy ngay cả chất lỏng có độ nhớt cao cũng không thành vấn đề/ A variety of materials can be measured, including transparent and reflective objects. Measurements are performed with no contact, so even highly-viscous liquids are no problem.



Phích cắm cài đặt có chức năng bù nhiệt độ giúp bạn dễ dàng cài đặt phạm vi cảm biến/ A setting plug with a temperature compensation function makes it easy to set the sensing range.
Phạm vi cảm biến có thể được thiết lập bằng Phích cắm cài đặt, đi kèm với Cảm biến. Không cần bộ điều khiển đặc biệt. Cảm biến nhiệt độ tích hợp của Phích cắm cài đặt cung cấp các đặc tính nhiệt độ cao hơn ± 1% FS/ The sensing range can be set by the Setting Plug, which is included with the Sensor. No special controller is required. The Setting Plug’s built-in temperature sensor provides superior temperature characteristics of ±1% FS.



Chức năng chống nhiễu lẫn nhau cho phép sử dụng tối đa năm Cảm biến ở gần nhau/ The mutual interference prevention function allows up to five Sensors to be used in close proximity.


 

Thông số kỹ thuật/ Specifications

Model	E4PA-LS50-M1-N
Sensing range	50 to 500 mm
Dead band distance	0 to 50 mm
Standard sensing object	100 × 100 mm flat plate
Applied frequency	Approx. 380 kHz
Response time	63 ms max.
Power supply voltage	10 to 30 VDC; ripple (p-p): 10% max.
Power consumption	1,800 mW max.
Analog output	Current output: 4 to 20 mA (Allowable load resistance: 500 Ω max.)
	Voltage output: 0 to 10 V (1,000 Ω min.)
Protective circuit	Load short-circuit protection, mutual interference prevention
Mutual interference prevention cycle time	10 ms
Linearity	±1% FS max.
Repeat accuracy *	0.1% FS max.
Temperature influence	±1% FS of output value at +23°C in the temperature range of -10 to 55°C
Voltage influence	±5% FS max. within rated power supply voltage range
Ambient temperature	Operating: -10 to 55°C (with no icing or condensation)
	Storage: -40 to 85°C (with no icing or condensation)
Ambient humidity	Operating and storage: 35% to 85% (with no condensation)
Insulation resistance	50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength	1,000 VAC (50/60 Hz) for 1 min between current-carrying parts and case
Vibration resistance	Destruction: 10 to 55 Hz, 1-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance	Destruction: 300 m/s2 three times each in X, Y, and Z directions
Connection method	5-conductor connector
Degree of protection	IEC60529: IP65
Weight (packed)	Approx. 240 g
Materials	Case: Stainless steel (SUS303)
	Sensing surface: PBT resin, polyurethane, glass epoxy resin
	Clamping nut: Stainless steel (SUS303)
Accessories	Operation Manual

- Xem chi tiết Tài liệu kỹ thuật/ Datasheet Omron E4PA-LS50-M1-N ở đây.


Tham khảo các model khác cùng loại:

Model	E4PA-LS200-M1-N
Sensing range	120 to 2,000 mm
Dead band distance	0 to 120 mm
Standard sensing object	100 × 100 mm flat plate
Applied frequency	Approx. 180 kHz
Response time	195 ms max.
Power supply voltage	10 to 30 VDC; ripple (p-p): 10% max.
Power consumption	1,800 mW max.
Analog output	Current output: 4 to 20 mA (Allowable load resistance: 500 Ω max.)
	Voltage output: 0 to 10 V (1,000 Ω min.)
Protective circuit	Load short-circuit protection, mutual interference prevention
Mutual interference prevention cycle time	34 ms
Linearity	±1% FS max.
Repeat accuracy *	0.1% FS max.
Temperature influence	±1% FS of output value at +23°C in the temperature range of -10 to 55°C
Voltage influence	±5% FS max. within rated power supply voltage range
Ambient temperature	Operating: -10 to 55°C (with no icing or condensation)
	Storage: -40 to 85°C (with no icing or condensation)
Ambient humidity	Operating and storage: 35% to 85% (with no condensation)
Insulation resistance	50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength	1,000 VAC (50/60 Hz) for 1 min between current-carrying parts and case
Vibration resistance	Destruction: 10 to 55 Hz, 1-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance	Destruction: 300 m/s2 three times each in X, Y, and Z directions
Connection method	5-conductor connector
Degree of protection	IEC60529: IP65
Weight (packed)	Approx. 240 g
Materials	Case: Stainless steel (SUS303)
	Sensing surface: PBT resin, polyurethane, glass epoxy resin
	Clamping nut: Stainless steel (SUS303)
Accessories	Operation Manual

 

Model	E4PA-LS400-M1-N
Sensing range	240 to 4,000 mm
Dead band distance	0 to 240 mm
Standard sensing object	100 × 100 mm flat plate
Applied frequency	Approx. 85 kHz
Response time	440 ms max.
Power supply voltage	10 to 30 VDC; ripple (p-p): 10% max.
Power consumption	1,800 mW max.
Analog output	Current output: 4 to 20 mA (Allowable load resistance: 500 Ω max.)
	Voltage output: 0 to 10 V (1,000 Ω min.)
Protective circuit	Load short-circuit protection, mutual interference prevention
Mutual interference prevention cycle time	77 ms
Linearity	±1% FS max.
Repeat accuracy *	0.1% FS max.
Temperature influence	±1% FS of output value at +23°C in the temperature range of -10 to 55°C
Voltage influence	±5% FS max. within rated power supply voltage range
Ambient temperature	Operating: -10 to 55°C (with no icing or condensation)
	Storage: -40 to 85°C (with no icing or condensation)
Ambient humidity	Operating and storage: 35% to 85% (with no condensation)
Insulation resistance	50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength	1,000 VAC (50/60 Hz) for 1 min between current-carrying parts and case
Vibration resistance	Destruction: 10 to 55 Hz, 1-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance	Destruction: 300 m/s2 three times each in X, Y, and Z directions
Connection method	5-conductor connector
Degree of protection	IEC60529: IP65
Weight (packed)	Approx. 320 g
Materials	Case: Stainless steel (SUS303)
	Sensing surface: PBT resin, polyurethane, glass epoxy resin
	Clamping nut: Stainless steel (SUS303)
Accessories	Operation Manual

 

Model	E4PA-LS600-M1-N
Sensing range	400 to 6,000 mm
Dead band distance	0 to 400 mm
Standard sensing object	100 × 100 mm flat plate
Applied frequency	Approx. 65 kHz
Response time	850 ms max.
Power supply voltage	10 to 30 VDC; ripple (p-p): 10% max.
Power consumption	1,800 mW max.
Analog output	Current output: 4 to 20 mA (Allowable load resistance: 500 Ω max.)
	Voltage output: 0 to 10 V (1,000 Ω min.)
Protective circuit	Load short-circuit protection, mutual interference prevention
Mutual interference prevention cycle time	143 ms
Linearity	±1% FS max.
Repeat accuracy *	0.1% FS max.
Temperature influence	±1% FS of output value at +23°C in the temperature range of -10 to 55°C
Voltage influence	±5% FS max. within rated power supply voltage range
Ambient temperature	Operating: -10 to 55°C (with no icing or condensation)
	Storage: -40 to 85°C (with no icing or condensation)
Ambient humidity	Operating and storage: 35% to 85% (with no condensation)
Insulation resistance	50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength	1,000 VAC (50/60 Hz) for 1 min between current-carrying parts and case
Vibration resistance	Destruction: 10 to 55 Hz, 1-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance	Destruction: 300 m/s2 three times each in X, Y, and Z directions
Connection method	5-conductor connector
Degree of protection	IEC60529: IP65
Weight (packed)	Approx. 400 g
Materials	Case: Stainless steel (SUS303)
	Sensing surface: PBT resin, polyurethane, glass epoxy resin
	Clamping nut: Stainless steel (SUS303)
Accessories	Operation Manual

 

Dimensions

E4PA-LS50-M1-N

Note: RUN indicator (yellow)
           Power indicator (green)
           Error indicator (red)


E4PA-LS200-M1-N

Note: RUN indicator (yellow)
           Power indicator (green)
           Error indicator (red)


E4PA-LS400-M1-N

Note: 1. RUN indicator (yellow)
              Power indicator (green)
              Error indicator (red)
          2. This is the dimension between the flat sides of the nuts.


E4PA-LS600-M1-N

Note: 1. RUN indicator (yellow)
              Power indicator (green)
              Error indicator (red)
           2. The distance between the flat sides of the nuts is 36 mm.