Phoenix Contact VAL-MS 1000DC-PV/2+V - 2800628 | Type 2 surge arrester -Chống sét lan truyền Solar T2 1000VDC 40kA 25ns L+ L- PE

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm PHOENIX CONTACT

• 

  Full Video hiếm -Tìm hiểu chi tiết bên trong một Bộ thiết bị chống sét lan truyền SPD

• 

  5 Điều Quan Trọng Cần Biết Về Thiết Bị Chống Sét Lan Truyền

• Xem thêm

Chống sét lan truyền Solar Phoenix Contact VAL-MS 1000DC-PV/2+V - 2800628 | Type 2 surge arrester

(T2 1000VDC 40kA 25ns L+ L- PE)

Surge protective device for 2-pos. isolated and grounded 1,000 V DC PV systems, for DIN rail mounting, 3-pos. base element, three pluggable temperature-monitored protective elements, status message on each plug.
 

Your advantages

- Quality proven millions of times over in the widest range of applications
- Rapid installation with bridges, thanks to industry-standard overall width of 1 HP
- Easy testing and insulation measurement, thanks to pluggable protection modules
- Wide range of applications due to various nominal voltages
- High degree of modularity provides individual solutions for every application
 

Bản vẽ kỹ thuật

Dimensional drawing


Circuit diagram
 

Kích thước/ Dimensions

Height	89.8 mm
Width	53.4 mm
Depth	65.7 mm (incl. DIN rail 7.5 mm)
Horizontal pitch	3 Div.

 

Môi trường hoạt động/ Ambient conditions

Degree of protection	IP20 (only when all terminal points are used)
Ambient temperature (operation)	-40 °C ... 80 °C
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	≤ 2000 m (amsl (above mean sea level))
Permissible humidity (operation)	5 % ... 95 %
Shock (operation)	60g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (operation)	7.5g (5-500 Hz/2.5 h/XYZ)

 

Thông số cơ bản/ General

IEC test classification	PV II
	PV T2
EN type	T2
SPD failure behavior	OCM (Open-circuit mode)
Connection configuration	Y configuration
Installation location	Interior
Accessibility	Accessible
Installation location of the disconnect device	Internal
Mode of protection	(L+) - (L-)
	(L+) - PE
	(L-) - PE
Mounting type	DIN rail: 35 mm
Color	jet black RAL 9005
Housing material	PA 6.6-FR
	PBT-FR
Degree of pollution	2
Distance between live and grounded parts	8 mm
Flammability rating according to UL 94	V-0
Type	DIN rail module, two-section, divisible
Surge protection fault message	optical

 

Mô tả bổ sung/ Additional descriptions

Note	Thiết bị này được thiết kế để lắp đặt bằng chứng cảm ứng trong nhà ở. Đảm bảo rằng có khoảng cách ít nhất là 8 mm giữa các bộ phận hoạt động và tiếp đất trong khu vực kết nối./ The device is intended for touch proof installation in a housing. Ensure that there is a gap of at least 8 mm between the active and grounded parts in the connection area.

 

Thông số bảo vệ mạch điện áp DC/ Protective circuit DC voltage side (DC)

Maximum continuous operating voltage UCPV	1170 V DC
Short-circuit current rating ISCPV	2000 A
Continuous operating current ICPV	< 20 µA
Rated load current IL	80 A
Residual current IPE	≤ 20 µA DC
	≤ 250 µA AC
Standby power consumption PC	≤ 25 mVA
Nominal discharge current (8/20) µs	15 kA
Maximum discharge current Imax (8/20) µs	40 kA
Total discharge current Itotal (8/20) µs	40 kA
Voltage protection level Up	≤ 3.7 kV
Residual voltage Ures	≤ 3.7 kV (at In)
	≤ 3.1 kV (at 5 kA)
	≤ 3.5 kV (at 10 kA)
	≤ 4 kV (at 20 kA)
	≤ 4.6 kV (at 30 kA)
	≤ 5 kV (at 40 kA)
Response time tA	≤ 25 ns
Insulation resistance Riso	> 5 GΩ (at 500 V DC)

 

Thông số kết nối/ Connection data

Connection method	Screw connection
Screw thread	M5
Tightening torque	3 Nm (1.5 mm² ... 16 mm²)
	4.5 Nm (25 mm² ... 35 mm²)
Stripping length	16 mm
Conductor cross section flexible	1.5 mm² ... 25 mm²
Conductor cross section solid	1.5 mm² ... 35 mm²
Conductor cross section AWG	15 ... 2
Connection method	Fork-type cable lug
Conductor cross section flexible	1.5 mm² ... 16 mm²

 

Thông số kỹ thuật UL/ UL specifications

SPD Type	1CA
Maximum continuous operating voltage MCOV	1170 V DC
Nominal voltage	1170 V DC
Mode of protection	(L+) - (L-)
	(L+) - G
	(L-) - G
Power distribution system	DC PV
Voltage protection rating VPR	3 kV
Nominal discharge current In	10 kA
Short-circuit current rating (SCCR)	50 kA

 

Thông số kết nối UL/ UL connection data

Conductor cross section AWG	10 ... 2
Tightening torque	30 lbf-in.

 

Quy chuẩn/ Standards and Regulations

Standards/regulations	EN 50539-11 2013

 

Tiêu chuẩn môi trường/ Environmental Product Compliance

China RoHS	Environmentally Friendly Use Period = 50 years
	For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”

 

Lớp bảo vệ/ Classifications

ECLASS

ECLASS 10.0.1	27130805
ECLASS 11.0	27130805
ECLASS 4.0	27130800
ECLASS 4.1	27130800
ECLASS 5.0	27130800
ECLASS 5.1	27130800
ECLASS 6.0	27130800
ECLASS 7.0	27130805
ECLASS 9.0	27130805

 

ETIM

ETIM 3.0	EC000941
ETIM 4.0	EC000941
ETIM 6.0	EC000941
ETIM 7.0	EC000941

 

UNSPSC

UNSPSC 6.01	30212010
UNSPSC 7.0901	39121610
UNSPSC 11	39121610
UNSPSC 12.01	39121610
UNSPSC 13.2	39121620
UNSPSC 18.0	39121620
UNSPSC 19.0	39121620
UNSPSC 20.0	39121620
UNSPSC 21.0	39121620

 

- Xem chi tiết Tài liệu kỹ thuật/ Datasheet Phoenix Contact VAL-MS 1000DC-PV/2+V - 2800628