Chống sét lan truyền Phoenix Contact VAL-MS 320/1+1 - 2804380 | Type 2 surge arrester
(T2 40kA 25ns 1AC 3-dây L+N+PE)
Surge arrester for 3-conductor power supply systems (L1, N, PE), consisting of a base element and protective connectors, for mounting on NS 35.
Your advantages
- Quality proven millions of times over in the widest range of applications
- Rapid installation with bridges, thanks to industry-standard overall width of 1 HP
- Easy testing and insulation measurement, thanks to pluggable protection modules
- Wide range of applications due to various nominal voltages
- High degree of modularity provides individual solutions for every application
Drawings

Dimensional drawing

Circuit diagram
Kích thước/ Dimensions
Height |
89.8 mm |
Width |
35.6 mm |
Depth |
65.7 mm (incl. DIN rail 7.5 mm) |
Horizontal pitch |
2 Div. |
Môi trường hoạt động/ Ambient conditions
Degree of protection |
IP20 (only when all terminal points are used) |
Ambient temperature (operation) |
-40 °C ... 80 °C |
Ambient temperature (storage/transport) |
-40 °C ... 80 °C |
Altitude |
≤ 2000 m (amsl (above mean sea level)) |
Permissible humidity (operation) |
5 % ... 95 % |
Shock (operation) |
25g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
Vibration (operation) |
5g (10 ... 500 Hz / 2.5 h / X, Y, Z) |
Thông tin cơ bản/ General
IEC test classification |
II |
|
T2 |
EN type |
T2 |
IEC power supply system |
TN-S |
|
TT |
Mode of protection |
L-N |
|
L-PE |
|
N-PE |
Mounting type |
DIN rail: 35 mm |
Color |
jet black RAL 9005 |
Housing material |
PA 6.6 |
|
PBT |
Degree of pollution |
2 |
Flammability rating according to UL 94 |
V-0 |
Type |
DIN rail module, two-section, divisible |
Number of positions |
2 |
Surge protection fault message |
optical |
Mạch bảo vệ/ Protective circuit
Nominal voltage UN |
240/415 V AC (TN-S) |
|
240/415 V AC (TT) |
Nominal frequency fN |
50 Hz (60 Hz) |
Maximum continuous operating voltage UC (L-N) |
335 V AC |
Maximum continuous operating voltage UC (L-PE) |
335 V AC |
Maximum continuous voltage UC (N-PE) |
260 V AC |
Rated load current IL |
80 A |
Residual current IPE |
≤ 5 µA |
Standby power consumption PC |
≤ 150 mVA |
Nominal discharge current In (8/20) µs |
20 kA |
Maximum discharge current Imax (8/20) µs |
40 kA |
Follow current interrupt rating Ifi (N-PE) |
100 A |
Short-circuit current rating ISCCR |
25 kA |
Voltage protection level Up (L-N) |
≤ 1.5 kV |
Voltage protection level Up (L-PE) |
≤ 1.8 kV |
Voltage protection level Up (N-PE) |
≤ 1.5 kV |
Residual voltage Ures (L-N) |
≤ 1.5 kV (at In) |
|
≤ 1.3 kV (at 10 kA) |
|
≤ 1.2 kV (at 5 kA) |
|
≤ 1.1 kV (at 3 kA) |
Residual voltage Ures (L-PE) |
≤ 1.8 kV (at In) |
|
≤ 1.4 kV (at 10 kA) |
|
≤ 1.2 kV (at 5 kA) |
|
≤ 1.1 kV (at 3 kA) |
Residual voltage Ures (N-PE) |
≤ 0.4 kV (at In) |
|
≤ 0.25 kV (at 10 kA) |
|
≤ 0.15 kV (at 5 kA) |
|
≤ 0.1 kV (at 3 kA) |
TOV behavior at UT (L-N) |
415 V AC (5 s / withstand mode) |
|
440 V AC (120 min / safe failure mode) |
TOV behavior at UT (N-PE) |
1200 V AC (200 ms / withstand mode) |
Response time tA (L-N) |
≤ 25 ns |
Response time tA (L-PE) |
≤ 100 ns |
Response time tA (N-PE) |
≤ 100 ns |
Max. backup fuse with V-type through wiring |
80 A (gG) |
Max. backup fuse with branch wiring |
125 A (gG) |
Thông số kết nối/ Connection data
Connection method |
Screw connection |
Screw thread |
M5 |
Tightening torque |
3 Nm (1.5 mm² ... 16 mm²) |
|
4.5 Nm (25 mm² ... 35 mm²) |
Stripping length |
16 mm |
Conductor cross section flexible |
1.5 mm² ... 25 mm² |
Conductor cross section solid |
1.5 mm² ... 35 mm² |
Conductor cross section AWG |
15 ... 2 |
Connection method |
Fork-type cable lug |
Conductor cross section flexible |
1.5 mm² ... 16 mm² |
Thông số kỹ thuật UL/ UL specifications
SPD Type |
4CA |
Maximum continuous operating voltage MCOV (L-L) |
640 V AC |
Maximum continuous operating voltage MCOV (L-N) |
320 V AC |
Maximum continuous operating voltage MCOV (L-G) |
320 V AC |
Maximum continuous operating voltage MCOV (N-G) |
260 V AC |
Nom. voltage |
240 V AC |
Mode of protection |
L-L |
|
L-N |
|
L-G |
|
N-G |
Power distribution system |
Single phase |
Nominal frequency |
50/60 Hz |
Measured limiting voltage MLV (L-L) |
2900 V |
Measured limiting voltage MLV (L-N) |
2030 V |
Measured limiting voltage MLV (L-G) |
2720 V |
Measured limiting voltage MLV (N-G) |
1370 V |
Nominal discharge current In (L-L) |
20 kA |
Nominal discharge current In (L-N) |
20 kA |
Nominal discharge current In (L-G) |
20 kA |
Nominal discharge current In (N-G) |
20 kA |
Thông số UL kết nối/ UL connection data
Conductor cross section AWG |
10 ... 2 |
Tightening torque |
30 lbf-in. |
Quy chuẩn/ Standards and Regulations
Standards/regulations |
IEC 61643-11 2011 |
|
EN 61643-11 2012 |
Tiêu chuẩn môi trường/ Environmental Product Compliance
China RoHS |
Environmentally Friendly Use Period = 50 years |
|
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
Lớp bảo vệ/ Classifications
ECLASS
ECLASS 10.0.1 |
27130805 |
ECLASS 11.0 |
27130805 |
ECLASS 4.0 |
27130800 |
ECLASS 4.1 |
27130800 |
ECLASS 5.0 |
27130800 |
ECLASS 5.1 |
27130800 |
ECLASS 6.0 |
27130800 |
ECLASS 7.0 |
27130805 |
ECLASS 9.0 |
27130805 |
ETIM
ETIM 2.0 |
EC000941 |
ETIM 3.0 |
EC000941 |
ETIM 4.0 |
EC000941 |
ETIM 6.0 |
EC000941 |
ETIM 7.0 |
EC000941 |
UNSPSC
UNSPSC 6.01 |
30212010 |
UNSPSC 7.0901 |
39121610 |
UNSPSC 11 |
39121610 |
UNSPSC 12.01 |
39121610 |
UNSPSC 13.2 |
39121620 |
UNSPSC 18.0 |
39121620 |
UNSPSC 19.0 |
39121620 |
UNSPSC 20.0 |
39121620 |
UNSPSC 21.0 |
39121620 |