Cắt-Lọc sét lan truyền Phoenix Contact VAL-MS-T1/T2 1000DC-PV/2+V-FM - 2801161 | Lightning/surge arrester type 1/2
(T1+T2 5kA 40kA 1000VDC 25ns L+ L- G Tiếp điểm phụ)
Lightning current arrester / surge protective device for 2-pos. isolated and grounded 1,000 V DC PV voltage systems, for DIN rail mounting, 3-pos. base element with remote indication contact, three pluggable temperature-monitored protective elements, status message at each plug.
Ưu điểm/ Your advantages
- Quality proven millions of times over in the widest range of applications
- Rapid installation with bridges, thanks to industry-standard overall width of 1 HP
- Easy testing and insulation measurement, thanks to pluggable protection modules
Bản vẽ kỹ thuật

Dimensional drawing

Circuit diagram
Kích thước/ Dimensions
Height |
98.7 mm |
Width |
53.4 mm |
Depth |
65.7 mm (incl. DIN rail 7.5 mm) |
Horizontal pitch |
3 Div. |
Môi trường hoạt động/ Ambient conditions
Degree of protection |
IP20 (only when all terminal points are used) |
Ambient temperature (operation) |
-40 °C ... 80 °C |
Ambient temperature (storage/transport) |
-40 °C ... 80 °C |
Altitude |
≤ 2000 m (amsl (above mean sea level)) |
Permissible humidity (operation) |
5 % ... 95 % |
Shock (operation) |
60g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
Vibration (operation) |
7.5g (5-500 Hz/2.5 h/XYZ) |
Thông số cơ bản/ General
IEC test classification |
PV I / II |
|
PV T1 / T2 |
EN type |
T1 / T2 |
SPD failure behavior |
OCM (Open-circuit mode) |
Connection configuration |
Y configuration |
Installation location |
Interior |
Accessibility |
Accessible |
Installation location of the disconnect device |
Internal |
Mode of protection |
(DC+) - (DC-) |
|
(DC+/DC-) - PE |
Mounting type |
DIN rail: 35 mm |
Color |
jet black RAL 9005 |
Housing material |
PA 6.6-FR |
|
PBT-FR |
Degree of pollution |
2 |
Distance between live and grounded parts |
8 mm |
Flammability rating according to UL 94 |
V-0 |
Type |
DIN rail module, two-section, divisible |
Surge protection fault message |
Optical, remote indicator contact |
Mô tả bổ sung/ Additional descriptions
Note |
Thiết bị này được thiết kế để lắp đặt bằng chứng cảm ứng trong nhà ở. Đảm bảo rằng có khoảng cách ít nhất là 8 mm giữa các bộ phận hoạt động và tiếp đất trong khu vực kết nối/ The device is intended for touch proof installation in a housing. Ensure that there is a gap of at least 8 mm between the active and grounded parts in the connection area. |
Thông số bảo vệ mạch điện áp DC/ Protective circuit DC voltage side (DC)
Maximum continuous operating voltage UCPV |
1050 V DC |
Short-circuit current rating ISCPV |
2000 A |
Continuous operating current ICPV |
< 20 µA |
Rated load current IL |
80 A |
Residual current IPE |
≤ 20 µA DC |
|
≤ 350 µA AC |
Standby power consumption PC |
≤ 25 mVA |
Nominal discharge current (8/20) µs |
15 kA |
Maximum discharge current Imax (8/20) µs |
40 kA |
Impulse discharge current (10/350) µs, charge |
2.5 As |
Impulse discharge current (10/350) µs, specific energy |
6.25 kJ/Ω |
Impulse discharge current (10/350) µs, peak value limp |
5 kA |
Total discharge current Itotal (8/20) µs |
40 kA |
Total discharge current Itotal (10/350) µs |
5 kA |
Voltage protection level Up |
≤ 3.5 kV |
Residual voltage Ures |
≤ 3.5 kV (at In) |
|
≤ 2.9 kV (at 5 kA) |
|
≤ 3.2 kV (at 10 kA) |
|
≤ 3.7 kV (at 20 kA) |
|
≤ 4.1 kV (at 30 kA) |
|
≤ 4.6 kV (at 40 kA) |
Response time tA |
≤ 25 ns |
Insulation resistance Riso |
> 5 GΩ (at 500 V DC) |
Thông số Tiếp điểm phụ/ Indicator/remote signaling
Switching function |
Changeover contact |
Operating voltage |
5 V AC ... 250 V AC |
|
30 V DC |
Operating current |
5 mA AC ... 1.5 A AC |
|
1 A DC |
Connection method |
Plug-in/screw connection via COMBICON |
Screw thread |
M2 |
Tightening torque |
0.25 Nm |
Stripping length |
7 mm |
Conductor cross section flexible |
0.14 mm² ... 1.5 mm² |
Conductor cross section solid |
0.14 mm² ... 1.5 mm² |
Conductor cross section AWG |
28 ... 16 |
Thông số kết nối/ Connection data
Connection method |
Screw connection |
Screw thread |
M5 |
Tightening torque |
3 Nm (1.5 mm² ... 16 mm²) |
|
4.5 Nm (25 mm² ... 35 mm²) |
Stripping length |
16 mm |
Conductor cross section flexible |
1.5 mm² ... 25 mm² |
Conductor cross section solid |
1.5 mm² ... 35 mm² |
Conductor cross section AWG |
15 ... 2 |
Connection method |
Fork-type cable lug |
Conductor cross section flexible |
1.5 mm² ... 16 mm² |
Thông số kỹ thuật UL/ UL specifications
SPD Type |
1CA |
Maximum continuous operating voltage MCOV |
1170 V DC |
Nominal voltage |
1170 V DC |
Mode of protection |
(L+) - (L-) |
|
(L+) - G |
|
(L-) - G |
Power distribution system |
DC PV |
Voltage protection rating VPR |
3 kV |
Nominal discharge current In |
10 kA |
Short-circuit current rating (SCCR) |
50 kA |
Thông số UL của tiếp điểm phụ/ UL indicator/remote signaling
Operating voltage |
125 V AC |
Operating current |
1 A AC |
Tightening torque |
4 lbf-in. |
Conductor cross section AWG |
30 ... 14 |
Thông số kết nối UL/ UL connection data
Conductor cross section AWG |
10 ... 2 |
Tightening torque |
30 lbf-in. |
Quy chuẩn/ Standards and Regulations
Standards/regulations |
EN 50539-11 2013 |
Tiêu chuẩn môi trường/ Environmental Product Compliance
China RoHS |
Environmentally Friendly Use Period = 50 years |
|
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
Lớp bảo vệ/ Classifications
ECLASS
ECLASS 10.0.1 |
27130802 |
ECLASS 11.0 |
27130802 |
ECLASS 4.0 |
27130800 |
ECLASS 4.1 |
27130800 |
ECLASS 5.0 |
27130800 |
ECLASS 5.1 |
27130800 |
ECLASS 6.0 |
27130800 |
ECLASS 7.0 |
27130802 |
ECLASS 9.0 |
27130802 |
ETIM
ETIM 3.0 |
EC000941 |
ETIM 4.0 |
EC000941 |
ETIM 6.0 |
EC000381 |
ETIM 7.0 |
EC000381 |
UNSPSC
UNSPSC 6.01 |
30212010 |
UNSPSC 7.0901 |
39121610 |
UNSPSC 11 |
39121610 |
UNSPSC 12.01 |
39121610 |
UNSPSC 13.2 |
39121620 |
UNSPSC 18.0 |
39121620 |
UNSPSC 19.0 |
39121620 |
UNSPSC 20.0 |
39121620 |
UNSPSC 21.0 |
39121620 |