Bộ lập trình PLC Siemens S7-1500 Controller CPU 1513-1 PN

General information

Product type designation

CPU 1513-1 PN

HW functional status

FS01

Firmware version

V2.6

Product function

• ● I&M data

Yes; I&M0 to I&M3

Engineering with

• ● STEP 7 TIA Portal configurable/integrated as of version

V15.1 (FW V2.6) / V15 (FW V2.5) or higher; with older TIA Portal versions configurable as 6ES7513-1AL01-0AB0

Configuration control

via dataset

Yes

Display

Screen diagonal [cm]

3.45 cm

Control elements

Number of keys

8

Mode buttons

2

Supply voltage

Type of supply voltage

24 V DC

permissible range, lower limit (DC)

19.2 V

permissible range, upper limit (DC)

28.8 V

Reverse polarity protection

Yes

Mains buffering

• ● Mains/voltage failure stored energy time

5 ms

• ● Repeat rate, min.

1/s

Input current

Current consumption (rated value)

0.7 A

Current consumption, max.

0.95 A

Inrush current, max.

1.9 A; Rated value

I²t

0.02 A²·s

Power

Infeed power to the backplane bus

10 W

Power consumption from the backplane bus (balanced)

5.5 W

Power loss

Power loss, typ.

5.7 W

Memory

Number of slots for SIMATIC memory card

1

SIMATIC memory card required

Yes

Work memory

• ● integrated (for program)

300 kbyte

• ● integrated (for data)

1.5 Mbyte

Load memory

• ● Plug-in (SIMATIC Memory Card), max.

32 Gbyte

Backup

• ● maintenance-free

Yes

CPU processing times

for bit operations, typ.

40 ns

for word operations, typ.

48 ns

for fixed point arithmetic, typ.

64 ns

for floating point arithmetic, typ.

256 ns

CPU-blocks

Number of elements (total)

2 000; Blocks (OB, FB, FC, DB) and UDTs

DB

• ● Number range

1 ... 60 999; subdivided into: number range that can be used by the user: 1 ... 59 999, and number range of DBs created via SFC 86: 60 000 ... 60 999

• ● Size, max.

1.5 Mbyte; For DBs with absolute addressing, the max. size is 64 KB

FB

• ● Number range

0 ... 65 535

• ● Size, max.

300 kbyte

FC

• ● Number range

0 ... 65 535

• ● Size, max.

300 kbyte

OB

• ● Size, max.

300 kbyte

• ● Number of free cycle OBs

100

• ● Number of time alarm OBs

20

• ● Number of delay alarm OBs

20

• ● Number of cyclic interrupt OBs

20; With minimum OB 3x cycle of 500 µs

• ● Number of process alarm OBs

50

• ● Number of DPV1 alarm OBs

3

• ● Number of isochronous mode OBs

2

• ● Number of technology synchronous alarm OBs

2

• ● Number of startup OBs

100

• ● Number of asynchronous error OBs

4

• ● Number of synchronous error OBs

2

• ● Number of diagnostic alarm OBs

1

Nesting depth

• ● per priority class

24

Counters, timers and their retentivity

S7 counter

• ● Number

2 048

Retentivity

• — adjustable

Yes

IEC counter

• ● Number

Any (only limited by the main memory)

Retentivity

• — adjustable

Yes

S7 times

• ● Number

2 048

Retentivity

• — adjustable

Yes

IEC timer

• ● Number

Any (only limited by the main memory)

Retentivity

• — adjustable

Yes

Data areas and their retentivity

Retentive data area (incl. timers, counters, flags), max.

128 kbyte; In total; available retentive memory for bit memories, timers, counters, DBs, and technology data (axes): 88 KB

Extended retentive data area (incl. timers, counters, flags), max.

1.5 Mbyte; When using PS 6 0W 24/48/60 V DC HF

Flag

• ● Number, max.

16 kbyte

• ● Number of clock memories

8; 8 clock memory bit, grouped into one clock memory byte

Data blocks

• ● Retentivity preset

No

Local data

• ● per priority class, max.

64 kbyte; max. 16 KB per block

Address area

Number of IO modules

2 048; max. number of modules / submodules

I/O address area

• ● Inputs

32 kbyte; All inputs are in the process image

• ● Outputs

32 kbyte; All outputs are in the process image

per integrated IO subsystem

• — Inputs (volume)

8 kbyte

• — Outputs (volume)

8 kbyte

per CM/CP

• — Inputs (volume)

8 kbyte

• — Outputs (volume)

8 kbyte

Subprocess images

• ● Number of subprocess images, max.

32

Hardware configuration

Number of distributed IO systems

32; A distributed I/O system is characterized not only by the integration of distributed I/O via PROFINET or PROFIBUS communication modules, but also by the connection of I/O via AS-i master modules or links (e.g. IE/PB-Link)

Number of DP masters

• ● Via CM

6; A maximum of 6 CMs (PROFINET + PROFIBUS) can be inserted in total

Number of IO Controllers

• ● integrated

1

• ● Via CM

6; A maximum of 6 CMs (PROFINET + PROFIBUS) can be inserted in total

Rack

• ● Modules per rack, max.

32; CPU + 31 modules

• ● Number of lines, max.

1

PtP CM

• ● Number of PtP CMs

the number of connectable PtP CMs is only limited by the number of available slots

Time of day

Clock

• ● Type

Hardware clock

• ● Backup time

6 wk; At 40 °C ambient temperature, typically

• ● Deviation per day, max.

10 s; Typ.: 2 s

Operating hours counter

• ● Number

16

Clock synchronization

• ● supported

Yes

• ● in AS, master

Yes

• ● in AS, slave

Yes

• ● on Ethernet via NTP

Yes

Interfaces

Number of PROFINET interfaces

1

1. Interface

Interface types

• ● Number of ports

2

• ● integrated switch

Yes

• ● RJ 45 (Ethernet)

Yes; X1

Protocols

• ● IP protocol

Yes; IPv4

• ● PROFINET IO Controller

Yes

• ● PROFINET IO Device

Yes

• ● SIMATIC communication

Yes

• ● Open IE communication

Yes

• ● Web server

Yes

• ● Media redundancy

Yes; MRP Automanager according to IEC 62439-2 Edition 2.0

PROFINET IO Controller

Services

• — PG/OP communication

Yes

• — S7 routing

Yes

• — Isochronous mode

Yes

• — Open IE communication

Yes

• — IRT

Yes

• — MRP

Yes; As MRP redundancy manager and/or MRP client; max. number of devices in the ring: 50

• — MRPD

Yes; Requirement: IRT

• — PROFIenergy

Yes

• — Prioritized startup

Yes; Max. 32 PROFINET devices

• — Number of connectable IO Devices, max.

128; In total, up to 512 distributed I/O devices can be connected via AS-i, PROFIBUS or PROFINET

• — Of which IO devices with IRT, max.

64

• — Number of connectable IO Devices for RT, max.

128

• — of which in line, max.

128

• — Number of IO Devices that can be simultaneously activated/deactivated, max.

8; in total across all interfaces

• — Number of IO Devices per tool, max.

8

• — Updating times

The minimum value of the update time also depends on communication share set for PROFINET IO, on the number of IO devices, and on the quantity of configured user data

Update time for IRT

• — for send cycle of 250 µs

250 μs to 4 ms; Note: In the case of IRT with isochronous mode, the minimum update time of 500 µs of the isochronous OB is decisive

• — for send cycle of 500 µs

500 µs to 8 ms

• — for send cycle of 1 ms

1 ms to 16 ms

• — for send cycle of 2 ms

2 ms to 32 ms

• — for send cycle of 4 ms

4 ms to 64 ms

• — With IRT and parameterization of "odd" send cycles

Update time = set "odd" send clock (any multiple of 125 µs: 375 µs, 625 µs ... 3 875 µs)

Update time for RT

• — for send cycle of 250 µs

250 µs to 128 ms

• — for send cycle of 500 µs

500 µs to 256 ms

• — for send cycle of 1 ms

1 ms to 512 ms

• — for send cycle of 2 ms

2 ms to 512 ms

• — for send cycle of 4 ms

4 ms to 512 ms

PROFINET IO Device

Services

• — PG/OP communication

Yes

• — S7 routing

Yes

• — Isochronous mode

No

• — Open IE communication

Yes

• — IRT

Yes

• — MRP

Yes; As MRP redundancy manager and/or MRP client; max. number of devices in the ring: 50

• — MRPD

Yes; Requirement: IRT

• — PROFIenergy

Yes

• — Shared device

Yes

• — Number of IO Controllers with shared device, max.

4

• — Asset management record

Yes; Per user program

Interface types

RJ 45 (Ethernet)

• ● 100 Mbps

Yes

• ● Autonegotiation

Yes

• ● Autocrossing

Yes

• ● Industrial Ethernet status LED

Yes

Protocols

Number of connections

• ● Number of connections, max.

128; via integrated interfaces of the CPU and connected CPs / CMs

• ● Number of connections reserved for ES/HMI/web

10

• ● Number of connections via integrated interfaces

88

• ● Number of S7 routing paths

16

Redundancy mode

• ● H-Sync forwarding

Yes

SIMATIC communication

• ● S7 communication, as server

Yes

• ● S7 communication, as client

Yes

• ● User data per job, max.

See online help (S7 communication, user data size)

Open IE communication

• ● TCP/IP

Yes

• — Data length, max.

64 kbyte

• — several passive connections per port, supported

Yes

• ● ISO-on-TCP (RFC1006)

Yes

• — Data length, max.

64 kbyte

• ● UDP

Yes

• — Data length, max.

2 kbyte; 1 472 bytes for UDP broadcast

• — UDP multicast

Yes; Max. 5 multicast circuits

• ● DHCP

No

• ● SNMP

Yes

• ● DCP

Yes

• ● LLDP

Yes

Web server

• ● HTTP

Yes; Standard and user pages

• ● HTTPS

Yes; Standard and user pages

OPC UA

• ● Runtime license required

Yes

• ● OPC UA client

Yes

• — Application authentication

Yes

• — Security policies

Available security policies: None, Basic128Rsa15, Basic256Rsa15, Basic256Sha256

• — User authentication

"anonymous" or by user name & password

• — Number of connections, max.

4

• — Number of nodes of the client interfaces, max.

1 000

• — Number of elements for one call of OPC_UA_NodeGetHandleList/OPC_UA_ReadList/OPC_UA_WriteList, max.

300

• — Number of elements for one call of OPC_UA_NameSpaceGetIndexList, max.

20

• — Number of elements for one call of OPC_UA_MethodGetHandleList, max.

100

• — Number of simultaneous calls of the client instructions per connection (except OPC_UA_ReadList,OPC_UA_WriteList,OPC_UA_MethodCall), max.

1

• — Number of simultaneous calls of the client instructions OPC_UA_ReadList,OPC_UA_WriteList and OPC_UA_MethodCall, max.

5

• — Number of registerable nodes, max.

5 000

• — Number of registerable method calls of OPC_UA_MethodCall, max.

100

• — Number of inputs/outputs when calling OPC_UA_MethodCall, max.

20

• ● OPC UA server

Yes; Data access (read, write, subscribe), method call, custom address space

• — Application authentication

Yes

• — Security policies

Available security policies: None, Basic128Rsa15, Basic256Rsa15, Basic256Sha256

• — User authentication

"anonymous" or by user name & password

• — Number of sessions, max.

32

• — Number of accessible variables, max.

50 000

• — Number of registerable nodes, max.

10 000

• — Number of subscriptions per session, max.

20

• — Sampling time, min.

100 ms

• — Send time, min.

500 ms

• — Number of server methods, max.

20

• — Number of inputs/outputs per server method, max.

20

• — Number of monitored items, max.

1 000; For 1 s sampling interval and 1 s send interval

• — Number of server interfaces, max.

10

• — Number of nodes for user-defined server interfaces, max.

1 000

Further protocols

• ● MODBUS

Yes; MODBUS TCP

Media redundancy

• ● Switchover time on line break, typ.

200 ms; For MRP, bumpless for MRPD

• ● Number of stations in the ring, max.

50

Isochronous mode

Isochronous operation (application synchronized up to terminal)

Yes; Distributed and central; with minimum OB 6x cycle of 500 µs (distributed) and 1 ms (central)

Equidistance

Yes

S7 message functions

Number of login stations for message functions, max.

32

Program alarms

Yes

Number of configurable program messages, max.

5 000; Program messages are generated by the "Program_Alarm" block, ProDiag or GRAPH

Number of loadable program messages in RUN, max.

2 500

Number of simultaneously active program alarms

• ● Number of program alarms

300

• ● Number of alarms for system diagnostics

100

• ● Number of alarms for motion technology objects

80

Test commissioning functions

Joint commission (Team Engineering)

Yes; Parallel online access possible for up to 5 engineering systems

Status block

Yes; Up to 8 simultaneously (in total across all ES clients)

Single step

No

Number of breakpoints

8

Status/control

• ● Status/control variable

Yes

• ● Variables

Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters

• ● Number of variables, max.

• — of which status variables, max.

200; per job

• — of which control variables, max.

200; per job

Forcing

• ● Forcing, variables

Peripheral inputs/outputs