Bộ chỉnh sáng đa năng 2x300VA AC230V Siemens N 528D01 | 5WG1528-1DB01

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm SIEMENS

• 

  Tất cả các Model Siemens Building automation and control systems

• 

  Thiết bị cho hệ thống điều khiển tòa nhà thông minh Siemens | Building Automation Control System (BKJO BKFLSO)

• Xem thêm

Bộ chỉnh sáng thông dụng 2x300VA AC230V Siemens N 528D01 | 5WG1528-1DB01

Universal dimmer 2 x 300 VA, AC 230 V
- Two outputs for switching and dimming resistive, inductive or capacitive loads
- Automatic adjustment to leading edge or trailing edge control, depending on the type of load
- Rated operational voltage AC 230 V
- Rated frequency 50 / 60 Hz
- Rated power at +35°C ambient temperature: 300 VA per output or 500 VA for single output usage, without any minimal load per output
- Electronic protection of each output against overload, short circuit and temperature rise
- Screw terminals for connection and through-wiring of untreated single-core, stranded or multi-core conductors, 0.5 ... 2.5 mm²
- Bicolor LED for indicating the switch status (red = on, green = off) or an error (orange, blinking) per output
- Bus-powered electronics
- Integrated bus coupling unit, bus connection via bus terminal block
- Device for DIN-rail mounting on a TH35 mounting rail according to DIN EN 60715

Additional functionalities GAMMA
- Per output with selectable mode (normal mode, one- or two-level timer mode, blinking)
- Adjustable ON- and OFF-delay
- Separately adjustable dimming time from 0% to 100% for switching on/off and dimming brighte/darker
- The ability to switch an output on or off by dimming brighter/darker
- Adjustable dimming value when switching on
- Immediate activation (jumping) or dimming to a new dimming value
- Selectable additional status object switching and/or status object dimming value for each output
- Additional object for each output for blocking/releasing the output
- Sending of status objects on request and/or automatically after a change
- Adjustable blocking time for sending status objects after restart and bus voltage recovery
- Adjustable dimming value for each output in the event of bus voltage failure and recovery
- Additional night mode object for time-limited switching on the output (and hence illumination) at night
- Adjustable ON period at night or with timer mode
- Selectable warning of imminent switching off the illumination by dimming to 50% of the previous dimming value during night mode or timer mode
- Integrated 8-bit scene control and integration of each output in up to 8 scenes
- Separately adjustable dimming time for scene control
- Selectable counting of operating hours and with threshold monitoring of the operating hours
- Selectable counting of load cycles and with threshold monitoring of the load cycles
- Optional disabling of the ripple control compensation in an electrical grid with frequency fl uctuations
- Building site function for switching the building site lighting on and off even if the bus devices have not yet been commissioned with ETS
 

Thông số kỹ thuật

Dimensions (W x H x D) 72 x 90 x 60 mm
Dimension width (1 MW = 18 mm) 4 MW

- Tài liệu kỹ thuật Siemens N 528D01 | 5WG1528-1DB01 ở đây.


Tham khảo thêm các model khác cùng loại:
N 530D31
Switching actuator 4 x AC 230 V, 6 AX, C-Load
N 543D31
Solar protection actuator, 4 x AC 230 V, 6 A, with end position detection
N 543D51
Solar protection actuator, 8 x AC 230 V, 6 A, with end position detection
N 528D01
Universal dimmer 2 x 300 VA, AC 230 V
N 530D51
Switching actuator 8 x AC 230 V, 6 AX, C-Load
N 525D11
Switch/dim actuator, 2x DALI Broadcast
N 530D61
Switching actuator 12 x AC 230 V, 6 AX, C-Load
N 532D31
Switching actuator 4 x AC 230 V, 10 AX, C-Load
N 554D31
Universal dimmer 4 x 300 VA / 1 x 1000 VA, AC 230 V
N 532D51
Switching actuator 8 x AC 230 V, 10 AX, C-Load
N 532D61
Switching actuator 12 x AC 230 V, 10 AX, C-Load
N 534D31
Switching actuator 4 x AC 230 V, 16/20 AX, C-Load
N 534D51
Switching actuator 8 x AC 230 V, 16/20 AX, C-Load
N 534D61
Switching actuator 12 x AC 230 V, 16/20 AX, C-Load