Bộ truyền động chuyển mạch đa hợp Siemens N 502/02 | 5WG1502-1AB02

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm SIEMENS

• 

  Tất cả các Model Siemens Building automation and control systems

• 

  Thiết bị cho hệ thống điều khiển tòa nhà thông minh Siemens | Building Automation Control System (BKJO BKFLSO)

• Xem thêm

Bộ truyền động chuyển mạch đa hợp Siemens N 502/02 | 5WG1502-1AB02

Combi switching actuator 8 x AC 230 V, 16 A, 8 x binary inputs
- 8 inputs AC/DC 12...230 V
- 8 relay contact outputs
- Rated contact voltage AC 230 V
- Rated contact operating current 16 A, p.f. = 1
- Electronics power supply via an integrated power supply unit for AC 230 V
- Device functional even without bus connection or if bus voltage absent or bus communication interrupted or not yet activated
- Push button to switch between bus and direct mode
- Push button for each output to switch the output in direct mode via a toggling function by a short actuation and for changing the output mode between remote control relay and time switch relay by holding down the push button for some seconds
- Device preset at the factory for direct switching of an output through a toggling function via the input of the same name
- Selectable function for each input when using the Engineering Tool Software (ETS):
  + Switching status / binary value transmission
  + Switching, short / long operation
  + Single button dimming, single button sun protection control, 1-button group control (sequence control)
  + 1-bit scene control
  + 8-bit scene control, 8-bit value, edge-triggered, 8-bit value, short / long operation
  + 16-bit floating point value, edge-triggered, 16-bit value, short / long operation, 16-bit value, edge-triggered, 16-bit floating point value, short / long operation

- Selectable function for each pair of inputs:
  + 2-button dimming with stop telegram or with cyclical sending
  + 2-pushbutton shutter/blind control

- Selectable blocking / releasing of each input via a corresponding blocking object
- Sending of the input objects after a change of status
- Selectable logic operation (AND/OR) for one input with a further communication object and with variable start value of the logic operation at bus voltage recovery
- Setting by means of the ETS, whether all outputs are to be configured identically or individually
- Selectable mode for each output (normal mode, time switch mode)
- Optional addition of a night mode object for each output for time-limited switching On of the output (and hence the illumination) at night
- Variable On and Off delay times for each output
- Variable On period in night mode or in time switch mode
- Selectable warning signal prior to imminent switching-off by means of three-times short off and on switching (flashing) in night mode or in time switch mode
- Optional status object per output for status reporting
- Sending of status objects on request and/or automatically after a change
- Integrated 8-bit scene control and linking of each output with up to 8 scenes
- Selectable switching state for each output at mains or bus power failure as well as after bus or mains voltage recovery
- Integrated bus coupling unit with only half a standard bus load
- Bus connection via bus terminal or contact system to data rail
- Modular installation devices for mounting on TH35 EN 60715 mounting rail
 

Thông số kỹ thuật

- Rated voltage AC 230 V
- Rated current 16 A
- Number of channels 8
- Number of inputs potentialfree 8
- Dimensions (W x H x D) 144 x 90 x 60 mm
- Dimension width (1 MW = 18 mm) 8 MW


- Thông số kỹ thuật Siemens N 502/02 | 5WG1502-1AB02 ở đây.


Tham khảo thêm các model khác cùng loại:
N 512/11
Switch actuator, main module, 3 x AC 230/400 V, 16 AX, C load, Load-check
N 512/21
Switch actuator submodule, 3 x AC 230/400 V, 16AX, C load, load-check
N 513/11
Switch actuator, main module, 3 x AC 230/400 V, 20 AX, C load, Load-check
N 513/21
Switch actuator submodule, 3 x AC 230/400 V, 20 AX, C load, load-check
N 562/11
Switch actuator, main module, 3 x AC 230/400 V, 10 AX, C load, Load-check
N 562/21
Switch actuator submodule, 3 x AC 230/400 V, 10 AX, C load, Load-check
N 510/03
Load switch, 4 x AC 230 V, 16 A
N 511/02
Switching actuator, 8 x AC 230 V, 16 A
N 512/01
Load switch, 8 x AC 230 V, 16 A, C load
N 512C01
Load switch, 8 x AC 120 V / AC 277 V / AC 347 V‚ 20 A, C load (cUL listed)
N 530D31
Switching actuator 4 x AC 230 V, 6 AX, C-Load
N 530D51
Switching actuator 8 x AC 230 V, 6 AX, C-Load
N 532D31
Switching actuator 4 x AC 230 V, 10 AX, C-Load
N 532D51
Switching actuator 8 x AC 230 V, 10 AX, C-Load
N 534D51
Switching actuator 8 x AC 230 V, 16/20 AX, C-Load
N 534D61
Switching actuator 12 x AC 230 V, 16/20 AX, C-Load
N 535D31
Switching actuator, 4 x AC 230 V, 16/20 AX, C-Load, Load Check
N 535D51
Switching actuator, 8 x AC 230 V, 16/20 AX, C-Load, Load Check
N 535D61
Switching actuator, 12 x AC 230 V, 16/20 AX, C-Load, Load Check
N 567/11
Switch actuator, 8 x 230 V AC, 8 A
N 567/12
Switch actuator, 8 x 230 V AC, 2 A
N 567/22
Switch actuator, 16 x AC 230 V, 10 A
JB 510C23
Binary Output, 2 x AC 120...277 V, 10 A (resistive load)
JB 512C23
Switching actuator 1 x AC 120...277 V, 20 A or 1 x AC 347 V, 15 AX, C load
JB 513C23
Binary Output 3 x 6 A, AC 120...277 V
RL 512/23
Switching actuator 1 x AC 230 V, 16 AX, C load
RL 513D23
Binary Output 3 x 6 A, AC 230 V
RS 510/23
Binary Output, 2 x AC 230 V, 10 A (resistive load)
UP 510/03
Binary Output 2 x AC 230 V, 10 A, with mounting frame and BTI interface
UP 510/13
Binary Output 2 x AC 230 V, 10 A
N 502/02
Combi switching actuator 8 x AC 230 V, 16 A, 8 x binary inputs
UP 511S32
Switch actuator 1 x AC 230 V, 16 A
UP 562S32
Switch/solar protection actuator 2 x AC 230 V, ∑ 16 A
M 592/01
Mounting case