Width | 22.5 mm |
Height | 99 mm |
Depth | 114.5 mm |
Degree of protection | IP20 |
Ambient temperature (operation) | -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K) |
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Max. permissible relative humidity (operation) | 95 % (at 25 °C, non-condensing) |
Nominal input voltage range | 100 V AC ... 240 V AC |
Input voltage range | 85 V AC ... 264 V AC |
90 V DC ... 350 V DC | |
AC frequency range | 45 Hz ... 65 Hz |
Frequency range DC | 0 Hz |
Current consumption | 0.5 A (85 V AC) |
0.2 A (264 V AC) | |
approx. 0.4 A (90 V DC) | |
approx. 0.1 A (350 V DC) | |
Nominal power consumption | 29.3 W |
Inrush surge current | < 15 A (typical) |
Mains buffering | > 20 ms (120 V AC) |
> 110 ms (230 V AC) | |
Input fuse | 1.25 A (slow-blow, internal) |
Nominal output voltage | 24 V DC ±1 % |
Setting range of the output voltage (USet) | 22.5 V DC ... 28.5 V DC (> 24 V DC, constant capacity restricted) |
Nominal output current (IN) | 1 A (up to 60°C) |
POWER BOOST (IBoost) | 1.3 A |
Connection in parallel | Yes, for assembling redundant systems and increasing efficiency |
Connection in series | yes |
Residual ripple | < 100 mVPP |
Output power | 24 W |
Typical response time | < 0.2 s |
Peak switching voltages nominal load | < 100 mVPP (20 MHz) |
Maximum power dissipation in no-load condition | < 1.4 W |
Power loss nominal load max. | < 4.5 W |
Net weight | 0.2 kg |
Operating voltage display | Green LED |
Efficiency | > 80 % (for 230 V AC and nominal values) |
Insulation voltage input/output | 3 kV (routine test) |
3 kV (type test) | |
Protection class | II (in closed control cabinet) |
Degree of protection | IP20 |
MTBF (IEC 61709, SN 29500) | > 500000 h |
Mounting position | On horizontal DIN rail NS 35 in acc. with EN 60715 |
Assembly instructions | alignable: vertical with spacing = 5 cm, horizontal with zero spacing |
Connection method | Pluggable screw connection |
Conductor cross section solid min. | 0.2 mm² |
Conductor cross section solid max. | 2.5 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 2.5 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 14 |
Stripping length | 7 mm |
Screw thread | M3 |
Connection method | Pluggable screw connection |
Conductor cross section solid min. | 0.2 mm² |
Conductor cross section solid max. | 2.5 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 2.5 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 14 |
Stripping length | 7 mm |
Output name | Active |
Output description | UOUT > 21.5 V: High signal |
Output voltage | + 24 V (Signal) |
Continuous load current | max. 20 mA |
Status display | Green LED (Uout > 21,5 V DC: LED permanently lit) |
Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
Noise emission | EN 55011 (EN 55022) |
Noise immunity | EN 61000-6-3:2007/A1:2011 |
Connection in acc. with standard | CUL |
Standard - Electrical safety | EN 60950-1/VDE 0805 (SELV) |
Standard - Safe isolation | DIN VDE 0100-410 |
UL approvals | UL/C-UL Listed ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D |
China RoHS | Environmentally Friendly Use Period = 25; |
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
eCl@ss 4.0 | 27040702 |
eCl@ss 4.1 | 27040702 |
eCl@ss 5.0 | 27242213 |
eCl@ss 5.1 | 27242213 |
eCl@ss 6.0 | 27049005 |
eCl@ss 7.0 | 27049002 |
eCl@ss 8.0 | 27049002 |
eCl@ss 9.0 | 27040701 |
ETIM 2.0 | EC001039 |
ETIM 3.0 | EC001039 |
ETIM 4.0 | EC000599 |
ETIM 5.0 | EC002540 |
ETIM 6.0 | EC002540 |
UNSPSC 6.01 | 30211502 |
UNSPSC 7.0901 | 39121004 |
UNSPSC 11 | 39121004 |
UNSPSC 12.01 | 39121004 |
UNSPSC 13.2 | 39121004 |