Bộ nguồn Phoenix Contact UNO-PS/1AC/24DC/240W - 2904372 | 1-phase 24VDC 240W

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm PHOENIX CONTACT

• 

  Các model Cấp nguồn và phụ kiện của AB Allen-Bradley | Rockwell Automation Power supplies and accessories

• 

  Các model Module cấp nguồn S7-1200 của Siemens | S7-1500 Power supplies

• Xem thêm

Phoenix Contact UNO-PS/1AC/24DC/240W - 2904372 là bộ cấp nguồn dòng UNO lắp DIN rail, đầu vào 1 pha, đầu ra 24VDC 240W

Output: 24VDC, 10A

Input AC: 85VAC - 264VAC

Vỏ nhựa, gắn trực tiếp trên Din Rail

* Sản xuất tại Đức

 

Ưu điểm của Bộ nguồn Phoenix Contact UNO-PS/1AC/24DC/240W - 2904372

- Flexible mounting by simply snapping onto the DIN rail

- More space in the control cabinet with up to 20 % higher power density

- Maximum energy efficiency, thanks to over 90 % efficiency and extremely low idling losses under 0.3 W

- Outdoor installation, thanks to the wide temperature range from -25°C to +70°C


             


 

Bản vẽ thiết kế mạch của Bộ nguồn Phoenix Contact 24-240W Power supply unit - UNO-PS/1AC/24DC/240W - 2904372

 

Dimensions của Bộ nguồn Phoenix Contact UNO-PS/1AC/24DC/240W - 2904372

Width	45 mm
Height	130 mm
Depth	125 mm

 

Ambient conditions của Bộ nguồn Phoenix Contact UNO-PS/1AC/24DC/240W - 2904372

Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 70 °C (> 55 °C Derating: 2.5 %/K)
Ambient temperature (start-up type tested)	-40 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Max. permissible relative humidity (operation)	≤ 95 % (at 25 °C, non-condensing)
Climatic class	3K3 (in acc. with EN 60721)
Degree of pollution	2

 

Input data của Bộ nguồn Phoenix Contact UNO-PS/1AC/24DC/240W - 2904372

Nominal input voltage range	100 V AC ... 240 V AC
Input voltage range	85 V AC ... 264 V AC (< 95 V AC Derating 1 %/V)
AC frequency range	45 Hz ... 65 Hz
Current consumption	2.3 A (120 V AC)
	1.2 A (230 V AC)
Nominal power consumption	257.3 W
Inrush surge current	< 80 A (typical)
Power failure bypass	> 10 ms (120 V AC)
	> 10 ms (230 V AC)
Input fuse	5 A (slow-blow, internal)
Choice of suitable circuit breakers	6 A ... 16 A (Characteristics B, C, D, K)
Type of protection	Transient surge protection
Protective circuit/component	Varistor

 

Output data của Bộ nguồn Phoenix Contact UNO-PS/1AC/24DC/240W - 2904372

Nominal output voltage	24 V DC ±1 %
Setting range of the output voltage (USet)	24 V DC ... 28 V DC ±1 %
Nominal output current (IN)	10 A (-25 °C ... 55 °C)
Derating	55 °C ... 70 °C (2.5%/K)
Connection in parallel	Yes, for redundancy and increased capacity
Connection in series	No
Feedback resistance	< 35 V DC
Circuit breaker against surge voltage at output by invasive foreign matter	≤ 35 V DC
Control deviation	change in load, static 10 % ... 90 %
	< 2 % (change in load, dynamic 10 % ... 90 %)
	< 0.1 % (change in input voltage ±10 %)
Residual ripple	< 50 mVPP (with nominal values)
Output power	240 W
Typical response time	< 1 s
Maximum power dissipation in no-load condition	< 1.1 W
Power loss nominal load max.	< 18.8 W

 

General của Bộ nguồn Phoenix Contact UNO-PS/1AC/24DC/240W - 2904372

Net weight	0.66 kg
Efficiency	> 93 % (for 230 V AC and nominal values)
Insulation voltage input/output	4 kV AC (type test)
	3 kV AC (routine test)
Protection class	I (in closed control cabinet)
Degree of protection	IP20
MTBF (IEC 61709, SN 29500)	> 562000 h (40 °C)
Mounting position	horizontal DIN rail NS 35, EN 60715
Assembly instructions	Alignable: 0 mm horizontally, 30 mm vertically

 

Connection data, input của Bộ nguồn Phoenix Contact UNO-PS/1AC/24DC/240W - 2904372

Connection method	Screw connection
Conductor cross section solid min.	0.2 mm²
Conductor cross section solid max.	2.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	2.5 mm²
Conductor cross section AWG min.	24
Conductor cross section AWG max.	14
Stripping length	8 mm
Screw thread	M3

 

Connection data, output của Bộ nguồn Phoenix Contact UNO-PS/1AC/24DC/240W - 2904372

Connection method	Screw connection
Conductor cross section solid min.	0.2 mm²
Conductor cross section solid max.	2.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	2.5 mm²
Conductor cross section AWG min.	24
Conductor cross section AWG max.	14
Stripping length	8 mm
Screw thread	M3

 

Standards and Regulations của Bộ nguồn Phoenix Contact UNO-PS/1AC/24DC/240W - 2904372

Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Noise immunity	EN 61000-6-2:2005
Standards/regulations	EN 61000-4-2
Contact discharge	4 kV (Test Level 2)
Standards/regulations	EN 61000-4-3
Frequency range	80 MHz ... 1 GHz
Test field strength	10 V/m (Test Level 3)
Frequency range	1.4 GHz ... 2 GHz
Test field strength	3 V/m (Test Level 2)
Standards/regulations	EN 61000-4-4
Comments	Criterion B
Standards/regulations	EN 61000-4-5
	EN 61000-6-3
	EN 61000-4-6
Frequency range	0.15 MHz ... 80 MHz
Voltage	10 V (Test Level 3)
Standards/regulations	EN 61000-4-11
Low Voltage Directive	Conformance with LV directive 2006/95/EC
Standard - Safety of transformers	EN 61558-2-16
Standard - Electrical safety	EN 60950-1/VDE 0805 (SELV)
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations	EN 50178/VDE 0160 (PELV)
Standard – Safety extra-low voltage	EN 60950-1 (SELV) and EN 60204 (PELV)
Standard - Safe isolation	DIN VDE 0100-410
Standard – Limitation of mains harmonic currents	EN 61000-3-2
UL approvals	UL Listed UL 508
	UL/C-UL Recognized UL 60950-1
	UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D T4 (Hazardous Location)
Shock	18 ms, 30g, in each space direction (according to IEC 60068-2-27)
Vibration (operation)	< 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6)
	15 Hz ... 150 Hz, 2.3g, 90 min.
Approval - requirement of the semiconductor industry with regard to mains voltage dips	EN 61000-4-11
Information technology equipment - safety (CB scheme)	CB Scheme

 

Environmental Product Compliance của Bộ nguồn Phoenix Contact UNO-PS/1AC/24DC/240W - 2904372

China RoHS	Environmentally Friendly Use Period = 25;
	For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”

 

Classifications của Bộ nguồn Phoenix Contact UNO-PS/1AC/24DC/240W - 2904372

  eCl@ss của Bộ nguồn Phoenix Contact UNO-PS/1AC/24DC/240W - 2904372

eCl@ss 4.0	27040702
eCl@ss 4.1	27040702
eCl@ss 5.0	27049002
eCl@ss 5.1	27049002
eCl@ss 6.0	27049002
eCl@ss 7.0	27049002
eCl@ss 8.0	27049002
eCl@ss 9.0	27040701

 

ETIM của Bộ nguồn Phoenix Contact UNO-PS/1AC/24DC/240W - 2904372

ETIM 4.0	EC000599
ETIM 5.0	EC002540
ETIM 6.0	EC002540

 

UNSPSC của Bộ nguồn Phoenix Contact UNO-PS/1AC/24DC/240W - 2904372

UNSPSC 13.2

39121004