Bộ nguồn 24vDC-100W Phoenix Contact Power supply unit - UNO-PS/1AC/24DC/100W - 2902993

Bộ nguồn 24vDC-100W Phoenix Contact Power supply unit - UNO-PS/1AC/24DC/100W - 2902993

4,323
Nhà sản xuất:

Phoenix Contact

;   

Xuất xứ: Germany

Giá sỉ:

Giá tốt nhất xem...0909186879 dienelectrics@gmail.com

Khuyến mãi:Discount
Thanh toán:C.O.D
Vận chuyển:Miễn phí Tp.HCM
Thông tin nổi bật
Thông tin chi tiết của 

Bộ nguồn Phoenix Contact 24V DC - 100W Power supply unit - UNO-PS/1AC/24DC/100W - 2902993

Output: 24VDC, 4.15A

Input AC: 85VAC - 264VAC

Vỏ nhựa, gắn trực tiếp trên Din Rail

* Sản xuất tại Đức



 

Your advantages


- Flexible mounting by simply snapping onto the DIN rail

- More space in the control cabinet with up to 20 % higher power density

- Maximum energy efficiency, thanks to over 90 % efficiency and extremely low idling losses under 0.3 W

- Outdoor installation, thanks to the wide temperature range from -25°C to +70°C


             


 

Bản vẽ thiết kế mạch của Bộ nguồn Phoenix Contact 24V DC - 100W Power supply unit - UNO-PS/1AC/24DC/ 60W - 2902993




 

Dimensions

Width 55 mm
Height 90 mm
Depth 84 mm



 

Ambient conditions

Degree of protection IP20
Ambient temperature (operation) -25 °C ... 70 °C (> 55° C derating : 2.5%/K)
Ambient temperature (start-up type tested) -40 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Max. permissible relative humidity (operation) ≤ 95 % (at 25 °C, non-condensing)
Climatic class 3K3 (in acc. with EN 60721)
Degree of pollution 2



 

Input data

Nominal input voltage range 100 V AC ... 240 V AC
Input voltage range 85 V AC ... 264 V AC
AC frequency range 45 Hz ... 65 Hz
Current consumption 1.7 A (120 V AC)
  1 A (230 V AC)
Nominal power consumption 114 W
Inrush surge current < 40 A (typical)
Power failure bypass > 20 ms (120 V AC)
  > 100 ms (230 V AC)
Input fuse 4 A (slow-blow, internal)
Choice of suitable circuit breakers 6 A ... 16 A (Characteristics B, C, D, K)
Type of protection Transient surge protection
Protective circuit/component Varistor



 

Output data

Nominal output voltage 24 V DC ±1 %
Nominal output current (IN) 4.2 A (-25 °C ... 55 °C)
Derating 55 °C ... 70 °C (2.5%/K)
Connection in parallel Yes, for redundancy and increased capacity
Connection in series yes
Feedback resistance < 35 V DC
Circuit breaker against surge voltage at output by invasive foreign matter ≤ 35 V DC
Control deviation < 1 % (change in load, static 10 % ... 90 %)
  < 2 % (Dynamic load change 10 % ... 90 %, 10 Hz)
  < 0.1 % (change in input voltage ±10 %)
Residual ripple < 30 mVPP (with nominal values)
Output power 100 W
Typical response time < 1 s
Maximum power dissipation in no-load condition < 0.5 W
Power loss nominal load max. < 11 W



 

General

Net weight 0.34 kg
Efficiency > 90 % (for 230 V AC and nominal values)
Insulation voltage input/output 4 kV AC (type test)
  3 kV AC (routine test)
Protection class II (in closed control cabinet)
Degree of protection IP20
MTBF (IEC 61709, SN 29500) > 738000 h (40 °C)
Mounting position horizontal DIN rail NS 35, EN 60715
Assembly instructions Alignable: 0 mm horizontally, 30 mm vertically



 

Connection data, input

Connection method Screw connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 14
Stripping length 8 mm
Screw thread M3


 

Connection data, output

Connection method Screw connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 14
Stripping length 8 mm
Screw thread M3



 

Standards and Regulations

Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
Noise immunity EN 61000-6-2:2005
Connection in acc. with standard CUL
Standards/regulations EN 61000-4-2
Contact discharge 4 kV (Test Level 2)
Standards/regulations EN 61000-4-3
Frequency range 80 MHz ... 1 GHz
Test field strength 10 V/m
Frequency range 1.4 GHz ... 2 GHz
Test field strength 3 V/m
Standards/regulations EN 61000-4-4
Comments Criterion B
Standards/regulations EN 61000-4-5
  EN 61000-6-3
  EN 61000-4-6
Frequency range 10 kHz ... 80 MHz
Voltage 10 V (Test Level 3)
Standards/regulations EN 61000-4-11
Low Voltage Directive Conformance with LV directive 2006/95/EC
Standard - Safety of transformers EN 61558-2-16
Standard - Electrical safety IEC 60950-1/VDE 0805 (SELV)
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations EN 50178/VDE 0160 (PELV)
Standard – Safety extra-low voltage IEC 60950-1 (SELV) and EN 60204-1 (PELV)
Standard - Safe isolation DIN VDE 0100-410
Standard – Limitation of mains harmonic currents EN 61000-3-2
UL approvals UL Listed UL 508
  UL/C-UL Recognized UL 60950-1
  UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D T4 (Hazardous Location)
Shock 18 ms, 30g, in each space direction (according to IEC 60068-2-27)
Vibration (operation) < 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6)
  15 Hz ... 150 Hz, 2.3g, 90 min.
Approval - requirement of the semiconductor industry with regard to mains voltage dips EN 61000-4-11
Information technology equipment - safety (CB scheme) CB Scheme


 

Environmental Product Compliance

China RoHS Environmentally Friendly Use Period = 25;
  For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”


 

Classifications

 

eCl@ss

eCl@ss 4.0 27040702
eCl@ss 4.1 27040702
eCl@ss 5.0 27049002
eCl@ss 5.1 27049002
eCl@ss 6.0 27049002
eCl@ss 7.0 27049002
eCl@ss 8.0 27049002
eCl@ss 9.0 27040701


 

ETIM

ETIM 3.0 EC001039
ETIM 4.0 EC000599
ETIM 5.0 EC002540
ETIM 6.0 EC002540



 

UNSPSC

UNSPSC 6.01 30211502
UNSPSC 7.0901 39121004
UNSPSC 11 39121004
UNSPSC 12.01 39121004
UNSPSC 13.2 39121004

 


 

Approvals



























 
Sản phẩm cùng loại
Gọi điện thoại