Bộ nguồn Phoenix Contact TRIO-PS/1AC/24DC/10 - 2866323 | 1AC 24VDC 10A

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm

• 

  Tìm hiểu chi tiết dòng sản phẩm Bộ nguồn LOGO Power của Siemens

• 

  Các model Cấp nguồn và phụ kiện của AB Allen-Bradley | Rockwell Automation Power supplies and accessories

• Xem thêm

Phoenix Contact TRIO-PS/1AC/24DC/10 - 2866323 là Bộ nguồn 1AC 24VDC 10A

Output: 24VDC, 10A

Input AC: 85VAC - 264VDC, vỏ kim loại

 

Your advantages của Bộ nguồn Phoenix Contact TRIO-PS/1AC/24DC/10 - 2866323

- Use the third negative terminal block as a grounding terminal block and minimize installation costs

- Maximum operational reliability thanks to high MTBF (mean time between failures) of more than 500,000 hours and high dielectric strength of up to 300 V AC

- Rugged design with metal housing and wide temperature range from -25 to +70°C

- Compensation of voltage drops by means of output voltage that can be adjusted on the front


             


 

Bản vẽ thiết kế của Bộ nguồn Phoenix Contact 24-10A Power supply unit - TRIO-PS/1AC/24DC/10 - 2866323

                                 

 

Dimensions của Bộ nguồn Phoenix Contact TRIO-PS/1AC/24DC/10 - 2866323

Width	60 mm
Height	130 mm
Depth	152.5 mm

 

Ambient conditions

Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 70 °C (> 55° C derating : 2.5%/K)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Max. permissible relative humidity (operation)	≤ 95 % (at 25 °C, non-condensing)
Climatic class	3K3 (in acc. with EN 60721)
Degree of pollution	2

 

Input data của Bộ nguồn Phoenix Contact TRIO-PS/1AC/24DC/10 - 2866323

Nominal input voltage range	100 V AC ... 240 V AC
Input voltage range	85 V AC ... 264 V AC (Derating < 90 V AC: 2,5 % / V)
Dielectric strength maximum	300 V AC
AC frequency range	45 Hz ... 65 Hz
Discharge current to PE	< 3.5 mA
Current consumption	3 A (100 V AC)
	1.5 A (240 V AC)
Inrush surge current	< 15 A
Power failure bypass	> 24 ms (120 V AC)
	> 24 ms (230 V AC)
Input fuse	6.3 A (slow-blow, internal)
Choice of suitable circuit breakers	10 A ... 16 A (Characteristics B, C, D, K)
Power factor (cos phi)	0.99
Type of protection	Transient surge protection
Protective circuit/component	Varistor

 

Output data của Bộ nguồn Phoenix Contact TRIO-PS/1AC/24DC/10 - 2866323

Nominal output voltage	24 V DC ±1 %
Setting range of the output voltage (USet)	22.5 V DC ... 29.5 V DC (> 24 V DC, constant capacity restricted)
Nominal output current (IN)	10 A (UOUT = 24 V DC)
Derating	55 °C ... 70 °C (2.5%/K)
Connection in parallel	Yes, for redundancy and increased capacity
Connection in series	yes
Feedback resistance	35 V DC
Circuit breaker against surge voltage at output by invasive foreign matter	< 35 V DC
Max. capacitive load	Unlimited
Active current limitation	Approx. 14 A (for short-circuit)
Control deviation	< 1 % (change in load, static 10 % ... 90 %)
	< 2 % (change in load, dynamic 10 % ... 90 %)
	< 0.1 % (change in input voltage ±10 %)
Residual ripple	< 10 mVPP
Output power	240 W
Typical response time	< 1 s
Peak switching voltages nominal load	< 50 mVPP
Maximum power dissipation in no-load condition	6.7 W
Power loss nominal load max.	30 W

 

General của Bộ nguồn Phoenix Contact TRIO-PS/1AC/24DC/10 - 2866323

Net weight	1.4 kg
Operating voltage display	Green LED
Efficiency	89 % (for 230 V AC and nominal values)
Insulation voltage input/output	4 kV AC (type test)
	2 kV AC (routine test)
Insulation voltage input / PE	2 kV AC (type test)
	2 kV AC (routine test)
Insulation voltage output / PE	500 V DC (type test)
Protection class	I (with PE connection)
Degree of protection	IP20
MTBF (IEC 61709, SN 29500)	> 981000 h
Mounting position	horizontal DIN rail NS 35, EN 60715
Assembly instructions	Can be aligned: Horizontally 0 mm, vertically 50 mm

 

Connection data, input của Bộ nguồn Phoenix Contact TRIO-PS/1AC/24DC/10 - 2866323

Connection method	Screw connection
Conductor cross section solid min.	0.2 mm²
Conductor cross section solid max.	2.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	2.5 mm²
Conductor cross section AWG min.	24
Conductor cross section AWG max.	14
Stripping length	9 mm
Screw thread	M2,5

Connection data, output của Bộ nguồn Phoenix Contact TRIO-PS/1AC/24DC/10 - 2866323

Connection method	Screw connection
Conductor cross section solid min.	0.2 mm²
Conductor cross section solid max.	2.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	2.5 mm²
Conductor cross section AWG min.	24
Conductor cross section AWG max.	14
Stripping length	9 mm
Screw thread	M2,5

 

Signaling của Bộ nguồn Phoenix Contact TRIO-PS/1AC/24DC/10 - 2866323

Status display	"DC OK" LED green
Note on status display	UOUT < 0.9 x UN: LED flashing

 

Standards and Regulations của Bộ nguồn Phoenix Contact TRIO-PS/1AC/24DC/10 - 2866323

Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Noise immunity	EN 61000-6-2:2005
Connection in acc. with standard	CUL
Standards/regulations	EN 61000-4-2
Contact discharge	4 kV (Test Level 2)
Standards/regulations	EN 61000-4-3
Frequency range	80 MHz ... 1 GHz
Test field strength	10 V/m
Frequency range	1.4 GHz ... 2 GHz
Test field strength	3 V/m
Standards/regulations	EN 61000-4-4
Comments	Criterion B
Standards/regulations	EN 61000-4-5
	EN 61000-6-3
	EN 61000-4-6
Frequency range	0.15 MHz ... 80 MHz
Voltage	10 V (Test Level 3)
Standards/regulations	EN 61000-4-11
Low Voltage Directive	Conformance with LV directive 2006/95/EC
Standard - Electrical safety	EN 60950-1/VDE 0805 (SELV)
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations	EN 50178/VDE 0160 (PELV)
Standard – Safety extra-low voltage	EN 60950-1 (SELV)
	EN 60204 (PELV)
Standard - Safe isolation	DIN VDE 0100-410
Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment	EN 50178
Standard – Limitation of mains harmonic currents	EN 61000-3-2
UL approvals	UL/C-UL listed UL 508
	UL/C-UL Recognized UL 60950-1
Shock	18 ms, 30g, in each space direction (according to IEC 60068-2-27)
Vibration (operation)	< 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6)
	15 Hz ... 150 Hz, 2.3g, 90 min.

 

Classifications của Bộ nguồn Phoenix Contact TRIO-PS/1AC/24DC/10 - 2866323

  eCl@ss

eCl@ss 4.0	27040702
eCl@ss 4.1	27040702
eCl@ss 5.0	27049002
eCl@ss 5.1	27049002
eCl@ss 6.0	27049002
eCl@ss 7.0	27049002
eCl@ss 8.0	27049002
eCl@ss 9.0	27040701

 

ETIM

ETIM 2.0	EC001039
ETIM 3.0	EC001039
ETIM 4.0	EC000599
ETIM 5.0	EC002540
ETIM 6.0	EC002540

 

UNSPSC

UNSPSC 6.01	30211502
UNSPSC 7.0901	39121004
UNSPSC 11	39121004
UNSPSC 12.01	39121004
UNSPSC 13.2	39121004

 

Approvals