Cầu nối điện Ceramics chịu nhiệt Phoenix Contact SSK 0525 KER-EX - 0501059

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm PHOENIX CONTACT

• 

  Wiki về Tiêu chuẩn ETIM là gì?

• 

  Wiki về Tiêu chuẩn UNSPSC là gì?

• Xem thêm

Phoenix Contact SSK 0525 KER-EX - 0501059 là Cầu đấu nối dây điện chịu nhiệt cao, chất liệu Ceramics, 0.2-4mm² 690V 32A 1000°C

 

- Xem chi tiết Tài liệu kỹ thuật/ Datasheet Cầu đấu chịu nhiệt Phoenix Contact SSK 0525 KER-EX - 0501059 | Feed-through terminal block

 

General của Cầu nối điện Ceramics chịu nhiệt Phoenix Contact SSK 0525 KER-EX - 0501059

Number of levels	1
Number of connections	2
Potentials	1
Nominal cross section	2.5 mm²
Color	ivory
Insulating material	PA
Material	Ceramics
Maximum load current	32 A (with 4 mm² conductor cross section)
Rated surge voltage	8 kV
Degree of pollution	3
Overvoltage category	III
Insulating material group	I
Maximum power dissipation for nominal condition	0.77 W
Maximum load current	32 A (with 4 mm² conductor cross section)
Nominal current IN	24 A
Nominal voltage UN	690 V
Open side panel	Yes
Shock protection test specification	IEC 60529:2001-02
Back of the hand protection	guaranteed
Finger protection	guaranteed
Result of surge voltage test	Test passed
Result of power-frequency withstand voltage test	Test passed
Power frequency withstand voltage setpoint	1.89 kV
Result of the test for mechanical stability of terminal points (5 x conductor connection)	Test passed
Result of flexion and pull-out test	Test passed
Bending test rotation speed	10 rpm
Bending test turns	135
Bending test conductor cross section/weight	0.2 mm² / 0.2 kg
	4 mm² / 0.9 kg
Tensile test result	Test passed
Result of tight fit on support	Test passed
Tight fit on carrier	NS 32
Setpoint	1 N
Result of voltage-drop test	Test passed
Result of temperature-rise test	Test passed
Requirement temperature-rise test	Increase in temperature ≤ 45 K
Short circuit stability result	Test passed
Conductor cross section short circuit testing	4 mm²
Short-time current	0.48 kA
Relative insulation material temperature index (Elec., UL 746 B)	1000 °C

 

Dimensions của Cầu nối điện Ceramics chịu nhiệt Phoenix Contact SSK 0525 KER-EX - 0501059

Width	6.2 mm
End cover width	3.5 mm
Length	38 mm
Height NS 32	48 mm

 

Connection data của Cầu nối điện Ceramics chịu nhiệt Phoenix Contact SSK 0525 KER-EX - 0501059

Connection method	Screw connection
Screw thread	M3
Stripping length	9 mm
Tightening torque, min	0.5 Nm
Tightening torque max	0.6 Nm
Connection in acc. with standard	IEC 60947-7-1
Conductor cross section solid min.	0.2 mm²
Conductor cross section solid max.	4 mm²
Conductor cross section AWG min.	24
Conductor cross section AWG max.	12
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	4 mm²
Min. AWG conductor cross section, flexible	24
Max. AWG conductor cross section, flexible	12
Conductor cross section flexible, with ferrule without plastic sleeve min.	0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.	2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.	0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.	1.5 mm²
2 conductors with same cross section, solid min.	0.2 mm²
2 conductors with same cross section, solid max.	1.5 mm²
2 conductors with same cross section, stranded min.	0.2 mm²
2 conductors with same cross section, stranded max.	1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum	0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum	1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum	0.25 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum	1.5 mm²
Connection in acc. with standard	IEC/EN 60079-7
Conductor cross section solid min.	0.2 mm²
Conductor cross section solid max.	4 mm²
Conductor cross section AWG min.	24
Conductor cross section AWG max.	12
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	2.5 mm²
Internal cylindrical gage	A3

 

Ambient conditions của Cầu nối điện Ceramics chịu nhiệt Phoenix Contact SSK 0525 KER-EX - 0501059

Operating temperature	-60 °C ... 180 °C
Ambient temperature (storage/transport)	for a short time, not exceeding 24 h, -60 °C to +70 °C

 

Standards and Regulations của Cầu nối điện Ceramics chịu nhiệt Phoenix Contact SSK 0525 KER-EX - 0501059

Connection in acc. with standard	CSA
	IEC 60947-7-1
	IEC/EN 60079-7

 

Environmental Product Compliance của Cầu nối điện Ceramics chịu nhiệt Phoenix Contact SSK 0525 KER-EX - 0501059

China RoHS	Environmentally friendly use period: unlimited = EFUP-e
	No hazardous substances above threshold values

 

Classifications của Cầu nối điện Ceramics chịu nhiệt Phoenix Contact SSK 0525 KER-EX - 0501059

ECLASS

ECLASS 10.0.1	27141120
ECLASS 11.0	27141120
ECLASS 4.0	27141100
ECLASS 4.1	27141100
ECLASS 5.0	27141100
ECLASS 5.1	27141100
ECLASS 6.0	27141100
ECLASS 7.0	27141120
ECLASS 9.0	27141120

 

ETIM

ETIM 2.0	EC000897
ETIM 3.0	EC000897
ETIM 4.0	EC000897
ETIM 6.0	EC000897
ETIM 7.0	EC000897

 

UNSPSC

UNSPSC 6.01	30211811
UNSPSC 7.0901	39121410
UNSPSC 11	39121410
UNSPSC 12.01	39121410
UNSPSC 13.2	39121410
UNSPSC 18.0	39121410
UNSPSC 19.0	39121410
UNSPSC 20.0	39121410
UNSPSC 21.0	39121410

 

Tham khảo thêm các model khác cùng loại với Cầu nối điện Ceramics chịu nhiệt Phoenix Contact SSK 0525 KER-EX - 0501059:

SSK 0525 KER-EX - Feed-through terminal block
0501059
Feed-through terminal block, connection method: screw connection, cross section: 0.2 mm2 - 4 mm2, 24 - 12 AWG, width: 6.2 mm, color: white, mounting type: NS 32, insulation material: ceramic

SSK 135 KER-EX - Feed-through terminal block
0505055
Feed-through terminal block, connection method: screw connection, cross section: 1 mm2 - 35 mm2, 18 - 2 AWG, color: white, mounting type: NS 32, insulation material: ceramic

SSK 116 KER-EX - Feed-through terminal block
0503057
Feed-through terminal block, connection method: screw connection, cross section: 0.5 mm2 - 16 mm2, 20 - 6 AWG, width: 10.4 mm, color: white, mounting type: NS 32, insulation material: ceramic

SSK 110 KER-EX - Feed-through terminal block
0502058
Feed-through terminal block, connection method: screw connection, cross section: 0.5 mm2 - 10 mm2, 20 - 8 AWG, width: 8.4 mm, color: white, mounting type: NS 32, insulation material: ceramic

D-SSK 135 KER - End cover
0205067
End cover, insulation material: ceramic

D-SSK 0525 KER - End cover
0201061
End cover, length: 38 mm, width: 4.2 mm, color: gray, insulation material: ceramic

D-SSK 110 KER - End cover
0202060
End cover, length: 38 mm, width: 4.2 mm, color: gray, insulation material: ceramic

D-SSK 116 KER - End cover
0203069
End cover, length: 38 mm, width: 4.2 mm, color: gray, insulation material: ceramic

SSK 110 KER 1E - Feed-through terminal block
3058501
Feed-through terminal block, connection method: screw connection, cross section: 0.5 mm2 - 10 mm2, 20 - 8 AWG, width: 8.4 mm, color: white, mounting type: NS 32, insulation material: ceramic

SSK 116 KER 1E - Feed-through terminal block
3058502
Feed-through terminal block, connection method: screw connection, cross section: 0.5 mm2 - 16 mm2, 20 - 6 AWG, width: 10.4 mm, color: white, mounting type: NS 32, insulation material: ceramic

SSK 0525 KER 1E - Feed-through terminal block
3058500
Feed-through terminal block, connection method: screw connection, cross section: 0.2 mm2 - 4 mm2, 24 - 12 AWG, width: 6.2 mm, color: white, mounting type: NS 32, insulation material: ceramic

SSK 135 KER 1E - Feed-through terminal block
3058503
Feed-through terminal block, connection method: screw connection, cross section: 1 mm2 - 35 mm2, 18 - 2 AWG, color: white, mounting type: NS 32, insulation material: ceramic