Công tắc truyền động 4xAC230V 10AX C-Load Siemens N 532D31 | 5WG1532-1DB31

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm SIEMENS

• 

  Tất cả các Model Siemens Building automation and control systems

• 

  Thiết bị cho hệ thống điều khiển tòa nhà thông minh Siemens | Building Automation Control System (BKJO BKFLSO)

• Xem thêm

Công tắc truyền động 4xAC230V 10AX C-Load Siemens N 532D31 | 5WG1532-1DB31

Switching actuator 4 x AC 230 V, 10 AX, C-Load
Rated contact current according to DIN EN 60669: 10 AX (140 µF fluorescent lamp load), 10 A (resistive load)

Additional functionalities GAMMA
Per output
- Selectable operating mode (normal mode, time switch mode, flashing mode)
- Selectable relay mode (NC/NO)
- Variable On and Off delay times
- Two selectable logic operations (AND, OR, NAND, NOR, XOR, FILTER, TRIGGER)
- Selectable sending of status objects on request, cyclically and/or automatically after a change
- Selectable switching state on bus voltage failure
- Selectable start value of the switching object on bus voltage recovery
- Optional addition of a night mode object for time-limited switching On of the output, i.e. the illumination, at night
- Variable On period at night or time switch mode
- Selectable addition of an object to change the On period at night or time switch mode
- Selectable post-triggering (1x, 2x, 3x, 4x, 5x) of the On period in time switch mode
- Selectable warning signal prior to imminent switching-off by brief off and on switching (flashing) at night or in time switch mode and/or via an optional warning object

Per output selectable functions:
- For manual override ON
- For permanent OFF switching
- Blocking of the output
- For switching on or off in forced mode
- Counting of operating hours and threshold monitoring
- Counting of load cycles and threshold monitoring
- Integrated 8-bit scene control with up to 8 scenes per output
- Construction site function switching
- Object for monitoring of device function
- Object for targeted retrieval of status values

 

Thông số kỹ thuật

Rated voltage AC 230 V
Rated current 10 A
Number of channels 4
Dimensions (W x H x D) 72 x 90 x 60 mm
Dimension width (1 MW = 18 mm) 4 MW


- Tài liệu kỹ thuật Siemens N 532D31 | 5WG1532-1DB31 ở đây.


Tham khảo thêm các model khác cùng loại:
N 530D31
Switching actuator 4 x AC 230 V, 6 AX, C-Load
N 543D31
Solar protection actuator, 4 x AC 230 V, 6 A, with end position detection
N 543D51
Solar protection actuator, 8 x AC 230 V, 6 A, with end position detection
N 554D31
Universal dimmer 4 x 300 VA / 1 x 1000 VA, AC 230 V
N 528D01
Universal dimmer 2 x 300 VA, AC 230 V
N 530D51
Switching actuator 8 x AC 230 V, 6 AX, C-Load
N 525D11
Switch/dim actuator, 2x DALI Broadcast
N 530D61
Switching actuator 12 x AC 230 V, 6 AX, C-Load
N 532D31
Switching actuator 4 x AC 230 V, 10 AX, C-Load
N 532D51
Switching actuator 8 x AC 230 V, 10 AX, C-Load
N 532D61
Switching actuator 12 x AC 230 V, 10 AX, C-Load
N 534D31
Switching actuator 4 x AC 230 V, 16/20 AX, C-Load
N 534D51
Switching actuator 8 x AC 230 V, 16/20 AX, C-Load
N 534D61
Switching actuator 12 x AC 230 V, 16/20 AX, C-Load