Level sensors LBR SicWave, Dòng cảm biến mức Sick đo mức trong vật liệu số lượng lớn với radar 80 GHz

Đơn giản là tuyệt vời - đo mức trong vật liệu số lượng lớn với radar 80 GHz/ Simply brilliant - level measurement in bulk materials with 80 GHz radar
- Radar không gian trống 80 GHz với nhiều ăng ten khác nhau/ 80 GHz free-space radar with various antennas
- Phạm vi đo: lên đến 120 m/ Measuring range: up to 120 m
- Nhiệt độ quy trình: −40 ° C ... +200 °C/ Process temperature: −40 °C ... +200 °C
- Áp suất quy trình: −1 bar ... 20 bar/ Process pressure: −1 bar ... 20 bar
- Kết nối quy trình: ren, mặt bích, giá đỡ đặc biệt/ Process connection: thread, flange, special brackets
- Vỏ: nhựa (IP66 / IP67) hoặc nhôm (IP66 / IP68)/ Housing: plastic (IP66 / IP67) or aluminum (IP66 / IP68)
- Có hoặc không có màn hình và WPAN/ With or without display and WPAN
- Chứng chỉ: Ex d, Ex ia, Ex ta/ Certificates: Ex d, Ex ia, Ex ta

Ưu điểm/ Your Benefits
- Một thiết bị cho tất cả các phép đo mức liên tục trong chất rắn, đơn giản hóa công việc hậu cần phụ tùng/ One device for all continuous level measurements in solids, simplifies spare part logistics
- Tăng tính khả dụng của nhà máy do không tiếp xúc, đo mức liên tục/ Increased plant availability due to non-contact, continuous level measurement
- Hoa hồng nhanh chóng, tiết kiệm thời gian và chi phí/ Quick to commission, saving time and costs
- Chi phí và thời gian thấp vì nó không cần bảo trì/ Low costs and time expenditure as it is maintenance-free
- Bền vững với sự can thiệp từ bên ngoài cho tính khả dụng cao của cây/ Rugged to external interference for high plant availability
- Không nhạy cảm với bọt và bụi, ngăn chặn thời gian ngừng hoạt động không mong muốn của nhà máy/ Insensitive to foam and dust, preventing unexpected plant downtime
- Chứng chỉ chống cháy nổ có sẵn/ Ex-certificates available
- Dịch vụ và chẩn đoán đơn giản hóa qua HART hoặc WPAN/ Simplified service and diagnostic via HART or WPAN
 

Overview

Đơn giản là tuyệt vời - đo mức trong vật liệu số lượng lớn với radar 80 GHz/ Simply brilliant - level measurement in bulk materials with 80 GHz radar
Radar không gian tự do LBR SicWave thực hiện các phép đo mức liên tục và hoạt động với tất cả các chất rắn. Nó có khả năng chống lại sự can thiệp từ bên ngoài, bụi hoặc cặn bẩn. Nhờ công nghệ radar 80 GHz không tiếp xúc, LBR SicWave có thể được đưa vào hoạt động dễ dàng và không cần bảo trì. Một loạt các tùy chọn về thiết kế ăng-ten, kết nối quy trình và vỏ đảm bảo kết nối lý tưởng với bất kỳ ứng dụng nào. Giao tiếp HART và kết nối WPAN đơn giản hóa dịch vụ và chẩn đoán trên thiết bị và chuẩn bị cho thiết bị một cách tối ưu cho các ứng dụng Công nghiệp 4.0./ The LBR SicWave free-space radar makes continuous level measurements and works with all solids. It is highly resistant to external interference, dust or deposits. Thanks to its non-contact 80 GHz radar technology, the LBR SicWave can be put into operation easily and is maintenance-free. A wide range of options for antenna design, process connections and housing ensure ideal connection to any application. HART communication and WPAN connection simplify service and diagnostics on the device and prepare it optimally for Industry 4.0 applications.

At a glance
- Radar không gian trống 80 GHz với nhiều ăng ten khác nhau/ 80 GHz free-space radar with various antennas
- Phạm vi đo: lên đến 120 m/ Measuring range: up to 120 m
- Nhiệt độ quy trình: −40 ° C ... +200 °C/ Process temperature: −40 °C ... +200 °C
- Áp suất quy trình: −1 bar ... 20 bar/ Process pressure: −1 bar ... 20 bar
- Kết nối quy trình: ren, mặt bích, giá đỡ đặc biệt/ Process connection: thread, flange, special brackets
- Vỏ: nhựa (IP66 / IP67) hoặc nhôm (IP66 / IP68)/ Housing: plastic (IP66 / IP67) or aluminum (IP66 / IP68)
- Có hoặc không có màn hình và WPAN/ With or without display and WPAN
- Chứng chỉ: Ex d, Ex ia, Ex ta/ Certificates: Ex d, Ex ia, Ex ta
 

Những ứng dụng/ Applications

Những lĩnh vực ứng dụng/ Fields of applications
- Máy nghiền, chuyển băng tải, bột thô, clinker và xi măng cũng như silo dùng cho nhiên liệu rắn trong hệ thống xi măng/ Crushers, belt transfer, raw meal, clinker and cement silos as well as silos for solid fuels in cement systems
- Cầu dao, silo chứa quặng, silo trong ngành kim loại và thép/ Breakers, storage silos for ores, silos in the metal and steel industry
- Máy cắt, kho dự trữ vật liệu rời, chuyển đai, đệm và silo sản xuất trong ngành khai khoáng/ Breakers, bulk material stockpiles, belt transfer, buffer and production silos in the mining industry
- Kho chứa và silo nhỏ trong ngành thực phẩm và đồ uống/ Storage and small silos in the food and beverage industry

Những ví dụ ứng dụng điển hình/ Examples of application
- Bảo vệ quá tải silo vôi và bể chứa sinh khối/ Overfill protection of the lime silo and biomass reservoir
- Đo mức liên tục cho các phễu tro/ Discontinuous level measurement for ash hoppers
- Giám sát mức trong silo/ Level monitoring in silos
 

Technical overview

 Technical data overview
Measurement principle: Free-space radar
Detection principle: Non contact
MediumSolids
Measurement: Continuous
Process temperature: –40 °C ... +200 °C
Process pressure: –1 bar ... 20 bar
Accuracy of sensor element: ≤ 5 mm


Product Selection
LBR-ACTTCBMHKAX 
Part no.: 6072182 
Measuring range: Up to 120 m (393.7 ft), recommended measuring range in thread version with integrated horn antenna up to 20 m (65.62 ft)
Process pressure: –1 bar ... 20 bar, (-100 kPa ... 2,000 kPa / –14.5 psig ... 290.1 psig)
Process temperature: –40 °C ... +200 °C
ATEX: ATEX II 1G, 1/2G, 2G Ex ia IIC T6
Probe type: Thread with integrated horn antenna made from PEEK
Connection type: M20 x 1.5 / cable gland PA black (ø 5 mm - 9 mm)
Housing material: Plastic PBT (polyester)
Process connection: Thread G 1 ½ PN20, DIN3852-A / 316L
Indication: Installed
Enclosure rating: IP67 / IP67
Control element: Pushbutton operation
 
LBR-AHCSAA2HAAX 
Part no.: 6072185 
Measuring range: Up to 120 m (393.7 ft), recommended measuring range in thread version with integrated horn antenna up to 20 m (65.62 ft)
Process pressure: –1 bar ... 3 bar, (-100 kPa ... 300 kPa / –14.5 psig ... 43.5 psig)
Process temperature: –40 °C ... +130 °C
ATEX: ATEX II 1G, 1/2G, 2G Ex ia IIC T6 + II 1D, 1/2D, 1/3D, 2D Ex ta IIIC T*
Probe type: Metal jacketed lens antenna / PEEK / c/w air purge connection
Connection type: M20 x 1.5 / cable gland nickel-plated brass (ø5 mm - 9 mm)
Housing material: Aluminum die cast AlSi10Mg, powder-coated (base: polyester)
Process connection: Swivel holder with flange DN100, PN16, form B, DIN / 316/316L
Indication: Installed
Enclosure rating: IP66 / IP68
Control element: Pushbutton operation
 
LBR-ACTTDAJHKAX 
Part no.: 6072184 
Measuring range: Up to 120 m (393.7 ft), recommended measuring range in thread version with integrated horn antenna up to 20 m (65.62 ft)
Process pressure: –1 bar ... 20 bar, (-100 kPa ... 2,000 kPa / –14.5 psig ... 290.1 psig)
Process temperature: –40 °C ... +130 °C
ATEX: ATEX II 1G, 1/2G, 2G Ex ia IIC T6
Probe type: Thread with integrated horn antenna made from PEEK
Connection type: ½ NPT / cable gland PA (ø 5 mm - 9 mm)
Housing material: Plastic PBT (polyester)
Process connection: Thread 1 ½'' NPT PN20, ASME B1.20.1 / 316L
Indication: Installed
Enclosure rating: IP67 / IP67
Control element: Pushbutton operation
 
LBR-AECSDBPHAAX 
Part no.: 6072187 
Measuring range: Up to 120 m (393.7 ft), recommended measuring range in thread version with integrated horn antenna up to 20 m (65.62 ft)
Process pressure: –1 bar ... 3 bar, (-100 kPa ... 300 kPa / –14.5 psig ... 43.5 psig)
Process temperature: –40 °C ... +200 °C
ATEX: ATEX II 1/2G, 2G Ex db IIC T6
Probe type: Metal jacketed lens antenna / PEEK / c/w air purge connection
Connection type: ½ NPT / cable gland nickel-plated brass (ø 6 mm - 12 mm)
Housing material: Aluminum die cast AlSi10Mg, powder-coated (base: polyester)
Process connection: Swivel holder with flange 4 150 lb / 316/316L
Indication: Installed
Enclosure rating: IP66 / IP68
Control element: Pushbutton operation
 
LBR-AHCSBA2HAAX 
Part no.: 6072186 
Measuring range: Up to 120 m (393.7 ft), recommended measuring range in thread version with integrated horn antenna up to 20 m (65.62 ft)
Process pressure: –1 bar ... 3 bar, (-100 kPa ... 300 kPa / –14.5 psig ... 43.5 psig)
Process temperature: –40 °C ... +130 °C
ATEX: ATEX II 1G, 1/2G, 2G Ex ia IIC T6 + II 1D, 1/2D, 1/3D, 2D Ex ta IIIC T*
Probe type: Metal jacketed lens antenna / PEEK / c/w air purge connection
Connection type: M20 x 1.5 / cable gland nickel-plated brass (ø5 mm - 9 mm)
Housing material: Aluminum die cast AlSi10Mg, powder-coated (base: polyester)
Process connection: Swivel holder with flange DN150, PN16, form B, DIN / 316/316L
Indication: Installed
Enclosure rating: IP66 / IP68
Control element: Pushbutton operation
 
LBR-AJCFBBOHAAX 
Part no.: 6072189 
Measuring range: Up to 120 m (393.7 ft), recommended measuring range in thread version with integrated horn antenna up to 20 m (65.62 ft)
Process pressure: –1 bar ... 3 bar, (-100 kPa ... 300 kPa / –14.5 psig ... 43.5 psig)
Process temperature: –40 °C ... +200 °C
ATEX: ATEX II 1/2G, 2G Ex db IIC T6 + II 1D, 1/2D, 1/3D, 2D Ex ta IIIC T*
Probe type: Metal jacketed lens antenna / PEEK / c/w air purge connection
Connection type: M20 x 1.5 / cable gland nickel-plated brass (ø 6 mm - 12 mm)
Housing material: Aluminum die cast AlSi10Mg, powder-coated (base: polyester)
Process connection: Flange DN 100 PN 16 form B, DIN 316 / 316L
Indication: Installed
Enclosure rating: IP66 / IP68
Control element: Pushbutton operation
 
LBR-ACTTDBJHKAX 
Part no.: 6072183 
Measuring range: Up to 120 m (393.7 ft), recommended measuring range in thread version with integrated horn antenna up to 20 m (65.62 ft)
Process pressure: –1 bar ... 20 bar, (-100 kPa ... 2,000 kPa / –14.5 psig ... 290.1 psig)
Process temperature: –40 °C ... +200 °C
ATEX: ATEX II 1G, 1/2G, 2G Ex ia IIC T6
Probe type: Thread with integrated horn antenna made from PEEK
Connection type: ½ NPT / cable gland PA (ø 5 mm - 9 mm)
Housing material: Plastic PBT (polyester)
Process connection: Thread 1 ½'' NPT PN20, ASME B1.20.1 / 316L
Indication: Installed
Enclosure rating: IP67 / IP67
Control element: Pushbutton operation
 
LBR-XXTTCAMHKXX 
Part no.: 6076492 
Measuring range: Up to 120 m (393.7 ft), recommended measuring range in thread version with integrated horn antenna up to 20 m (65.62 ft)
Process pressure: –1 bar ... 20 bar, (-100 kPa ... 2,000 kPa / –14.5 psig ... 290.1 psig)
Process temperature: –40 °C ... +130 °C
Probe type: Thread with integrated horn antenna made from PEEK
Connection type: M20 x 1.5 / cable gland PA black (ø 5 mm - 9 mm)
Housing material: Plastic PBT (polyester)
Process connection: Thread G 1 ½ PN20, DIN3852-A / 316L
Indication: Without
Enclosure rating: IP67 / IP67
 
LBR-XXCSDBMHAAX 
Part no.: 6076254 
Measuring range: Up to 120 m (393.7 ft), recommended measuring range in thread version with integrated horn antenna up to 20 m (65.62 ft)
Process pressure: –1 bar ... 3 bar, (-100 kPa ... 300 kPa / –14.5 psig ... 43.5 psig)
Process temperature: –40 °C ... +200 °C
Probe type: Metal jacketed lens antenna / PEEK / c/w air purge connection
Connection type: M20 x 1.5 / cable gland PA black (ø 5 mm - 9 mm)
Housing material: Aluminum die cast AlSi10Mg, powder-coated (base: polyester)
Process connection: Swivel holder with flange 4 150 lb / 316/316L
Indication: Installed
Enclosure rating: IP66 / IP68
 
LBR-AJCFCBOHAAX 
Part no.: 6072190 
Measuring range: Up to 120 m (393.7 ft), recommended measuring range in thread version with integrated horn antenna up to 20 m (65.62 ft)
Process pressure: –1 bar ... 3 bar, (-100 kPa ... 300 kPa / –14.5 psig ... 43.5 psig)
Process temperature: –40 °C ... +200 °C
ATEX: ATEX II 1/2G, 2G Ex db IIC T6 + II 1D, 1/2D, 1/3D, 2D Ex ta IIIC T*
Probe type: Metal jacketed lens antenna / PEEK / c/w air purge connection
Connection type: M20 x 1.5 / cable gland nickel-plated brass (ø 6 mm - 12 mm)
Housing material: Aluminum die cast AlSi10Mg, powder-coated (base: polyester)
Process connection: Flange DN 150 PN 16 form B, DIN 316 / 316L
Indication: Installed
Enclosure rating: IP66 / IP68
Control element: Pushbutton operation
 
LBR-XXBXDCBHKXX 
Part no.: 6072114 
Measuring range: Up to 120 m (393.7 ft), recommended measuring range in thread version with integrated horn antenna up to 20 m (65.62 ft)
Process pressure: –1 bar ... 2 bar, (-100 kPa ... 200 kPa / –14.5 psig ... 29.1 psig)
Process temperature: –40 °C ... +80 °C
Probe type: Plastic horn antenna made from PP
Connection type: M20 x 1.5 / plug connector M12 x 1 pin assignment B
Housing material: Plastic PBT (polyester)
Process connection: Mounting clamp, length: 300 mm / 316L
Indication: Without
Enclosure rating: IP67 / IP67
 
LBR-ACTTCAMHKAX 
Part no.: 6072181 
Measuring range: Up to 120 m (393.7 ft), recommended measuring range in thread version with integrated horn antenna up to 20 m (65.62 ft)
Process pressure: –1 bar ... 20 bar, (-100 kPa ... 2,000 kPa / –14.5 psig ... 290.1 psig)
Process temperature: –40 °C ... +130 °C
ATEX: ATEX II 1G, 1/2G, 2G Ex ia IIC T6
Probe type: Thread with integrated horn antenna made from PEEK
Connection type: M20 x 1.5 / cable gland PA black (ø 5 mm - 9 mm)
Housing material: Plastic PBT (polyester)
Process connection: Thread G 1 ½ PN20, DIN3852-A / 316L
Indication: Installed
Enclosure rating: IP67 / IP67
Control element: Pushbutton operation
 
LBR-AJCFABOHAAX 
Part no.: 6072188 
Measuring range: Up to 120 m (393.7 ft), recommended measuring range in thread version with integrated horn antenna up to 20 m (65.62 ft)
Process pressure: –1 bar ... 3 bar, (-100 kPa ... 300 kPa / –14.5 psig ... 43.5 psig)
Process temperature: –40 °C ... +200 °C
ATEX: ATEX II 1/2G, 2G Ex db IIC T6 + II 1D, 1/2D, 1/3D, 2D Ex ta IIIC T*
Probe type: Metal jacketed lens antenna / PEEK / c/w air purge connection
Connection type: M20 x 1.5 / cable gland nickel-plated brass (ø 6 mm - 12 mm)
Housing material: Aluminum die cast AlSi10Mg, powder-coated (base: polyester)
Process connection: Flange DN 80 PN 16 form B, DIN 316 / 316L
Indication: Installed
Enclosure rating: IP66 / IP68
Control element: Pushbutton operation
 
LBR-XXBXCCBHKXX 
Part no.: 6072113 
Measuring range: Up to 120 m (393.7 ft), recommended measuring range in thread version with integrated horn antenna up to 20 m (65.62 ft)
Process pressure: –1 bar ... 2 bar, (-100 kPa ... 200 kPa / –14.5 psig ... 29.1 psig)
Process temperature: –40 °C ... +80 °C
Probe type: Plastic horn antenna made from PP
Connection type: M20 x 1.5 / plug connector M12 x 1 pin assignment B
Housing material: Plastic PBT (polyester)
Process connection: Mounting clamp, length: 170 mm / 316L
Indication: Without
Enclosure rating: IP67 / IP67
 
LBR-XXBXXCBHKXX 
Part no.: 6072112 
Measuring range: Up to 120 m (393.7 ft), recommended measuring range in thread version with integrated horn antenna up to 20 m (65.62 ft)
Process pressure: –1 bar ... 2 bar, (-100 kPa ... 200 kPa / –14.5 psig ... 29.1 psig)
Process temperature: –40 °C ... +80 °C
Probe type: Plastic horn antenna made from PP
Connection type: M20 x 1.5 / plug connector M12 x 1 pin assignment B
Housing material: Plastic PBT (polyester)
Process connection: Without process connection
Indication: Without
Enclosure rating: IP67 / IP67
 
LBR-XXBXXCBHKKX 
Part no.: 6072664 
Measuring range: Up to 120 m (393.7 ft), recommended measuring range in thread version with integrated horn antenna up to 20 m (65.62 ft)
Process pressure: –1 bar ... 2 bar, (-100 kPa ... 200 kPa / –14.5 psig ... 29.1 psig)
Process temperature: –40 °C ... +80 °C
Probe type: Plastic horn antenna made from PP
Connection type: M20 x 1.5 / plug connector M12 x 1 pin assignment B
Housing material: Plastic PBT (polyester)
Process connection: Without process connection
Indication: Installed
Enclosure rating: IP67 / IP67
Control element: BluetoothMagnet pin operation
 
LBR-XXCSBAMHAKX 
Part no.: 6074395 
Measuring range: Up to 120 m (393.7 ft), recommended measuring range in thread version with integrated horn antenna up to 20 m (65.62 ft)
Process pressure: –1 bar ... 3 bar, (-100 kPa ... 300 kPa / –14.5 psig ... 43.5 psig)
Process temperature: –40 °C ... +130 °C
Probe type: Metal jacketed lens antenna / PEEK / c/w air purge connection
Connection type: M20 x 1.5 / plug connector M12 x 1 pin assignment B
Housing material: Aluminum die cast AlSi10Mg, powder-coated (base: polyester)
Process connection: Swivel holder with flange DN150, PN16, form B, DIN / 316/316L
Indication: Installed
Enclosure rating: IP66 / IP68
Control element: BluetoothMagnet pin operation
 
LBR-XXCSAAMHAKX 
Part no.: 6075375 
Measuring range: Up to 120 m (393.7 ft), recommended measuring range in thread version with integrated horn antenna up to 20 m (65.62 ft)
Process pressure: –1 bar ... 3 bar, (-100 kPa ... 300 kPa / –14.5 psig ... 43.5 psig)
Process temperature: –40 °C ... +130 °C
Probe type: Metal jacketed lens antenna / PEEK / c/w air purge connection
Connection type: M20 x 1.5 / cable gland PA black (ø 5 mm - 9 mm)
Housing material: Aluminum die cast AlSi10Mg, powder-coated (base: polyester)
Process connection: Swivel holder with flange DN100, PN16, form B, DIN / 316/316L
Indication: Installed
Enclosure rating: IP66 / IP68
Control element: BluetoothMagnet pin operation
 
LBR-XXTTCAOHAKX 
Part no.: 6075380 
Measuring range: Up to 120 m (393.7 ft), recommended measuring range in thread version with integrated horn antenna up to 20 m (65.62 ft)
Process pressure: –1 bar ... 20 bar, (-100 kPa ... 2,000 kPa / –14.5 psig ... 290.1 psig)
Process temperature: –40 °C ... +130 °C
Probe type: Thread with integrated horn antenna made from PEEK
Connection type: M20 x 1.5 / cable gland nickel-plated brass (ø 6 mm - 12 mm)
Housing material: Aluminum die cast AlSi10Mg, powder-coated (base: polyester)
Process connection: Thread G 1 ½ PN20, DIN3852-A / 316L
Indication: Installed
Enclosure rating: IP66 / IP68
Control element: BluetoothMagnet pin operation
 
LBR-XXBXDCBHAKX 
Part no.: 6075674 
Measuring range: Up to 120 m (393.7 ft), recommended measuring range in thread version with integrated horn antenna up to 20 m (65.62 ft)
Process pressure: –1 bar ... 2 bar, (-100 kPa ... 200 kPa / –14.5 psig ... 29.1 psig)
Process temperature: –40 °C ... +80 °C
Probe type: Plastic horn antenna made from PP
Connection type: M20 x 1.5 / plug connector M12 x 1 pin assignment B
Housing material: Aluminum die cast AlSi10Mg, powder-coated (base: polyester)
Process connection: Mounting clamp, length: 300 mm / 316L
Indication: Installed
Enclosure rating: IP66 / IP68
Control element: BluetoothMagnet pin operation
 
LBR-XXCFBBBHAAX 
Part no.: 6075334 
Measuring range: Up to 120 m (393.7 ft), recommended measuring range in thread version with integrated horn antenna up to 20 m (65.62 ft)
Process pressure: –1 bar ... 3 bar, (-100 kPa ... 300 kPa / –14.5 psig ... 43.5 psig)
Process temperature: –40 °C ... +200 °C
Probe type: Metal jacketed lens antenna / PEEK / c/w air purge connection
Connection type: M20 x 1.5 / plug connector M12 x 1 pin assignment B
Housing material: Aluminum die cast AlSi10Mg, powder-coated (base: polyester)
Process connection: Flange DN 100 PN 16 form B, DIN 316 / 316L
Indication: Installed
Enclosure rating: IP66 / IP68
 
LBR-XXBXCCBHKAX 
Part no.: 6075632 
Measuring range: Up to 120 m (393.7 ft), recommended measuring range in thread version with integrated horn antenna up to 20 m (65.62 ft)
Process pressure: –1 bar ... 2 bar, (-100 kPa ... 200 kPa / –14.5 psig ... 29.1 psig)
Process temperature: –40 °C ... +80 °C
Probe type: Plastic horn antenna made from PP
Connection type: M20 x 1.5 / plug connector M12 x 1 pin assignment B
Housing material: Plastic PBT (polyester)
Process connection: Mounting clamp, length: 170 mm / 316L
Indication: Installed
Enclosure rating: IP67 / IP67
 
LBR-XXCFAABHKKX 
Part no.: 6075019 
Measuring range: Up to 120 m (393.7 ft), recommended measuring range in thread version with integrated horn antenna up to 20 m (65.62 ft)
Process pressure: –1 bar ... 3 bar, (-100 kPa ... 300 kPa / –14.5 psig ... 43.5 psig)
Process temperature: –40 °C ... +130 °C
Probe type: Metal jacketed lens antenna / PEEK / c/w air purge connection
Connection type: M20 x 1.5 / plug connector M12 x 1 pin assignment B
Housing material: Plastic PBT (polyester)
Process connection: Flange DN 80 PN 16 form B, DIN 316 / 316L
Indication: Installed
Enclosure rating: IP67 / IP67
Control element: BluetoothMagnet pin operation
 
LBR-XXTTCAMHAKX 
Part no.: 6075822 
Measuring range: Up to 120 m (393.7 ft), recommended measuring range in thread version with integrated horn antenna up to 20 m (65.62 ft)
Process pressure: –1 bar ... 20 bar, (-100 kPa ... 2,000 kPa / –14.5 psig ... 290.1 psig)
Process temperature: –40 °C ... +130 °C
Probe type: Thread with integrated horn antenna made from PEEK
Connection type: M20 x 1.5 / cable gland PA black (ø 5 mm - 9 mm)
Housing material: Aluminum die cast AlSi10Mg, powder-coated (base: polyester)
Process connection: Thread G 1 ½ PN20, DIN3852-A / 316L
Indication: Installed
Enclosure rating: IP66 / IP68
Control element: BluetoothMagnet pin operation
 
LBR-XXCSDBPHAXX 
Part no.: 6075943 
Measuring range: Up to 120 m (393.7 ft), recommended measuring range in thread version with integrated horn antenna up to 20 m (65.62 ft)
Process pressure: –1 bar ... 3 bar, (-100 kPa ... 300 kPa / –14.5 psig ... 43.5 psig)
Process temperature: –40 °C ... +200 °C
Probe type: Metal jacketed lens antenna / PEEK / c/w air purge connection
Connection type: ½ NPT / cable gland nickel-plated brass (ø 6 mm - 12 mm)
Housing material: Aluminum die cast AlSi10Mg, powder-coated (base: polyester)
Process connection: Swivel holder with flange 4 150 lb / 316/316L
Indication: Without
Enclosure rating: IP66 / IP68
 
LBR-XXCSDBJHAXX 
Part no.: 6075942 
Measuring range: Up to 120 m (393.7 ft), recommended measuring range in thread version with integrated horn antenna up to 20 m (65.62 ft)
Process pressure: –1 bar ... 3 bar, (-100 kPa ... 300 kPa / –14.5 psig ... 43.5 psig)
Process temperature: –40 °C ... +200 °C
Probe type: Metal jacketed lens antenna / PEEK / c/w air purge connection
Connection type: ½ NPT / cable gland PA (ø 5 mm - 9 mm)
Housing material: Aluminum die cast AlSi10Mg, powder-coated (base: polyester)
Process connection: Swivel holder with flange 4 150 lb / 316/316L
Indication: Without
Enclosure rating: IP66 / IP68
 
LBR-XXCSAAJHAAX 
Part no.: 6076001 
Measuring range: Up to 120 m (393.7 ft), recommended measuring range in thread version with integrated horn antenna up to 20 m (65.62 ft)
Process pressure: –1 bar ... 3 bar, (-100 kPa ... 300 kPa / –14.5 psig ... 43.5 psig)
Process temperature: –40 °C ... +130 °C
Probe type: Metal jacketed lens antenna / PEEK / c/w air purge connection
Connection type: ½ NPT / cable gland PA (ø 5 mm - 9 mm)
Housing material: Aluminum die cast AlSi10Mg, powder-coated (base: polyester)
Process connection: Swivel holder with flange DN100, PN16, form B, DIN / 316/316L
Indication: Installed
Enclosure rating: IP66 / IP68
 
LBR-XXTTCBBHKKX 
Part no.: 6075803 
Measuring range: Up to 120 m (393.7 ft), recommended measuring range in thread version with integrated horn antenna up to 20 m (65.62 ft)
Process pressure: –1 bar ... 20 bar, (-100 kPa ... 2,000 kPa / –14.5 psig ... 290.1 psig)
Process temperature: –40 °C ... +200 °C
Probe type: Thread with integrated horn antenna made from PEEK
Connection type: M20 x 1.5 / plug connector M12 x 1 pin assignment B
Housing material: Plastic PBT (polyester)
Process connection: Thread G 1 ½ PN20, DIN3852-A / 316L
Indication: Installed
Enclosure rating: IP67 / IP67
Control element: BluetoothMagnet pin operation