Level sensors LFP Inox, Dòng cảm biến mức Sick -Giải pháp sạch

Giải pháp sạch/ The clean solution
- Đo mức trong các ứng dụng vệ sinh/ Level measurement in hygienic applications
- Đầu dò que có thể được cắt theo chiều dài thủ công dài đến 4.000 mm với Ra ≤ 0,8 µm/ Rod probe can be cut to length manually up to 4,000 mm long with Ra ≤ 0.8 µm
- Nhiệt độ xử lý lên đến 180 ° C, áp suất xử lý lên đến 16 bar/ Process temperature up to 180 °C, process pressure up to 16 bar
- CIP/SIP-resistant
- Xếp hạng bảo vệ vỏ cao: IP 67 và IP 69, có thể hấp tiệt trùng/ High enclosure rating: IP 67 and IP 69, autoclavable
- Các kết nối quy trình vệ sinh có thể hoán đổi cho nhau/ Interchangeable hygienic process connections
- 3 trong 1: kết hợp hiển thị, đầu ra tương tự và đầu ra nhị phân/ 3 in 1: combines display, analog output, and binary output
- Bộ khuếch đại từ xa với kết nối quy trình/ Remote amplifier with process connection
- IO-Link 1.1

Ưu điểm/ Your Benefits

- Thiết kế chắc chắn tăng tuổi thọ sử dụng/ Rugged design increases service life
- Tính linh hoạt cao - đầu dò que có thể được cắt theo chiều dài và khái niệm kết nối có thể hoán đổi cho nhau/ High flexibility – rod probe can be cut to length and connection concept is interchangeable
- Tiết kiệm chi phí do kết quả của nhiều tín hiệu đầu ra: một hệ thống cho cả đo mức điểm và mức liên tục/ Cost savings as a result of multiple output signals: one system for both point level and continuous level measurement
- Không cần bảo trì và dễ dàng vận hành mà không cần hiệu chuẩn, tiết kiệm thời gian và tiền bạc/ Maintenance-free and easy to commission without calibration, saving time and money
- Hiển thị từ xa các giá trị đo và tiết kiệm không gian/ Remote display of measured values and saves space
 

Overview

The clean solution
LFP Inox là cảm biến đo mức hợp vệ sinh cho chất lỏng sử dụng công nghệ TDR - một quá trình xác định thời gian bay của sóng điện từ. Chênh lệch thời gian giữa xung gửi đi và xung phản xạ được sử dụng để tạo ra tín hiệu mức, vừa là giá trị liên tục (đầu ra tương tự) vừa là điểm chuyển mạch có thể định vị tự do (đầu ra chuyển mạch). Việc sử dụng các vật liệu tuân thủ FDA trong một thiết kế được chứng nhận bởi EHEDG có nghĩa là Inox LFP có thể được tin cậy để làm sạch tối ưu và không hạn chế, ngay cả trong các ứng dụng có yêu cầu vệ sinh nghiêm ngặt nhất. Hệ thống kết nối mô-đun của nó cho phép cài đặt đơn giản và linh hoạt trong bất kỳ ứng dụng nào. Nhờ khả năng chịu nhiệt độ và áp suất cao, có thể sử dụng không hạn chế trong điều kiện CIP và SIP. Cấu hình ấn tượng này nổi bật với khả năng giao tiếp thông qua IO-Link tới các đơn vị điều khiển siêu cấp./ The LFP Inox is a hygienic level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal, both as a continuous value (analog output) and a freely positionable switching point (switching output). The use of FDA-compliant materials in an EHEDG-certified design means that the LFP Inox can be relied upon for optimum and unrestricted cleaning, even in applications with the most stringent hygiene requirements. Its modular connection system allows simple and flexible installation in any application. Thanks to high temperature and pressure resistance, unrestricted use is possible under CIP and SIP conditions. This impressive profile is topped off with communication capability via IO-Link to the superordinate control units.

At a glance
- Đo mức trong các ứng dụng vệ sinh/ Level measurement in hygienic applications
- Đầu dò que có thể được cắt theo chiều dài thủ công dài đến 4.000 mm với Ra ≤ 0,8 µm/ Rod probe can be cut to length manually up to 4,000 mm long with Ra ≤ 0.8 µm
- Nhiệt độ xử lý lên đến 180 ° C, áp suất xử lý lên đến 16 bar/ Process temperature up to 180 °C, process pressure up to 16 bar
- CIP/SIP-resistant
- Xếp hạng bảo vệ vỏ cao: IP 67 và IP 69, có thể hấp tiệt trùng/ High enclosure rating: IP 67 and IP 69, autoclavable
- Các kết nối quy trình vệ sinh có thể hoán đổi cho nhau/ Interchangeable hygienic process connections
- 3 trong 1: kết hợp hiển thị, đầu ra tương tự và đầu ra nhị phân/ 3 in 1: combines display, analog output, and binary output
- Bộ khuếch đại từ xa với kết nối quy trình/ Remote amplifier with process connection
- IO-Link 1.1
 

Những ứng dụng/ Applications

Những lĩnh vực ứng dụng/ Fields of applications
- Giám sát mức trong bể đệm của hệ thống chiết rót và máy chiết rót/ Level monitoring in buffer tanks of filling systems and filling machines
- Giám sát mức độ trong hệ thống rửa/ Level monitoring in rinsing systems
- Giám sát mức trong hệ thống CIP/ Level monitoring in CIP systems
- Đo mức trong hệ thống pha chế trong ngành mỹ phẩm và dược phẩm/ Level measurement in mixing systems in the cosmetics and pharmaceuticals industry
- Giám sát mức độ trong các quy trình công nghiệp với điều kiện môi trường khó khăn/ Level monitoring in industrial processes with difficult ambient conditions

Những ví dụ về ứng dụng/ Examples of application
- Đo mức tại bể chứa/ Level measurement at storage tanks
- Giám sát mức độ của các thùng chứa CIP/ Level monitoring of the CIP storage containers
- Đo mức trong bể đệm của hệ thống đóng chai/ Level measurement in buffer tanks of bottling systems
- Đo mức trong thùng máy của máy đóng chai/ Level measurement in the machine tank of bottling machines
- Giám sát mức độ của các thùng chứa CIP/ Level monitoring of the CIP storage containers
- Đo mức trong bể đệm của hệ thống đóng chai/ Level measurement in buffer tanks of bottling systems
- Đo mức đổ đầy của nước và bể chứa chất lỏng/ Measuring the fill level of water and fluid tanks
- Giám sát mức độ và áp suất nước làm mát trong quá trình đúc liên tục/ Monitoring level and pressure of cooling water during continuous casting
 

Technical overview

 Technical data overview
Measurement principle: TDR sensor
Detection principle: Contact
Medium: Fluids
Measurement: Switch, Continuous
Process temperature: –20 °C ... +180 °C
Process pressure: –1 bar ... 16 bar
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V / 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Accuracy of sensor element: ± 5 mm


Product Selection
LFP1000-G1BMB 
Part no.: 1071119 
Process connection: G ¾ A
Probe length: 1,000 mm
Application type/design: Remote amplifier, length of cable 1 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP4000-G1NMB 
Part no.: 1065357 
Process connection: G ¾ A
Probe length: 4,000 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP2500-G1NMB 
Part no.: 1065361 
Process connection: G ¾ A
Probe length: 2,500 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP3000-G1NMB 
Part no.: 1065347 
Process connection: G ¾ A
Probe length: 3,000 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1250-G1NMB 
Part no.: 1065587 
Process connection: G ¾ A
Probe length: 1,250 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1400-N1NMB 
Part no.: 1059419 
Process connection: ¾ NPT
Probe length: 1,400 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0500-N1NMB 
Part no.: 1058043 
Process connection: ¾ NPT
Probe length: 500 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0200-G1NMB 
Part no.: 1060307 
Process connection: G ¾ A
Probe length: 200 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1100-N1NMB 
Part no.: 1059416 
Process connection: ¾ NPT
Probe length: 1,100 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0500-NANMB 
Part no.: 1080640
Process connection: ¾ NPT
Probe length: 500 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Cable connector M12 x 1, 5-polig
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP2000-NCNMC 
Part no.: 1080636
Process connection: ¾ NPT
Probe length: 2,000 mm
Application type/design: Standard
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Cable connector M12 x 1, 8-polig
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP2000-GDNMC 
Part no.: 1080633
Process connection: G ¾ A
Probe length: 2,000 mm
Application type/design: Standard
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Cable connector M12 x 1, 8-polig
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP0500-GDNMC 
Part no.: 1080622
Process connection: G ¾ A
Probe length: 500 mm
Application type/design: Standard
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Cable connector M12 x 1, 8-polig
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP2000-G1NMB 
Part no.: 1052085 
Process connection: G ¾ A
Probe length: 2,000 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1400-G1NMB 
Part no.: 1052079 
Process connection: G ¾ A
Probe length: 1,400 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1500-G1NMB 
Part no.: 1052080 
Process connection: G ¾ A
Probe length: 1,500 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1600-G1NMB 
Part no.: 1052081 
Process connection: G ¾ A
Probe length: 1,600 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1200-G1NMB 
Part no.: 1052077 
Process connection: G ¾ A
Probe length: 1,200 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0900-G1NMB 
Part no.: 1052074 
Process connection: G ¾ A
Probe length: 900 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1700-G1NMB 
Part no.: 1052082 
Process connection: G ¾ A
Probe length: 1,700 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1100-G1NMB 
Part no.: 1052076 
Process connection: G ¾ A
Probe length: 1,100 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1300-G1NMB 
Part no.: 1052078 
Process connection: G ¾ A
Probe length: 1,300 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0700-G1NMB 
Part no.: 1052072 
Process connection: G ¾ A
Probe length: 700 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0500-G1NMB 
Part no.: 1052070 
Process connection: G ¾ A
Probe length: 500 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0800-G1NMB 
Part no.: 1052073 
Process connection: G ¾ A
Probe length: 800 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1000-G1NMB 
Part no.: 1052075 
Process connection: G ¾ A
Probe length: 1,000 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0600-G1NMB 
Part no.: 1052071 
Process connection: G ¾ A
Probe length: 600 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0400-G1NMB 
Part no.: 1052069 
Process connection: G ¾ A
Probe length: 400 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0300-G1NMB 
Part no.: 1053288 
Process connection: G ¾ A
Probe length: 300 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0600-G2NMB 
Part no.: 1056289 
Process connection: G ¾ A
Probe length: 600 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP0400-G2NMB 
Part no.: 1056225 
Process connection: G ¾ A
Probe length: 400 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP0500-G2NMB 
Part no.: 1056288 
Process connection: G ¾ A
Probe length: 500 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP0550-G1NMB 
Part no.: 1072770 
Process connection: G ¾ A
Probe length: 550 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0480-G1NMB 
Part no.: 1083803 
Process connection: G ¾ A
Probe length: 480 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP2300-G1NMB 
Part no.: 1065359 
Process connection: G ¾ A
Probe length: 2,300 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP2400-G1NMB 
Part no.: 1065360 
Process connection: G ¾ A
Probe length: 2,400 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP2000-N1NMB 
Part no.: 1059425 
Process connection: ¾ NPT
Probe length: 2,000 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP2600-G1NMB 
Part no.: 1065362 
Process connection: G ¾ A
Probe length: 2,600 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP3500-G1NMB 
Part no.: 1065352 
Process connection: G ¾ A
Probe length: 3,500 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP3100-G1NMB 
Part no.: 1065348 
Process connection: G ¾ A
Probe length: 3,100 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1000-N1NMB 
Part no.: 1055623 
Process connection: ¾ NPT
Probe length: 1,000 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0750-N1NMB 
Part no.: 1064404 
Process connection: ¾ NPT
Probe length: 750 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1300-N1NMB 
Part no.: 1059418 
Process connection: ¾ NPT
Probe length: 1,300 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1800-N1NMB 
Part no.: 1059423 
Process connection: ¾ NPT
Probe length: 1,800 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1500-N1NMB 
Part no.: 1059420 
Process connection: ¾ NPT
Probe length: 1,500 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0225-G1NMB 
Part no.: 1056116 
Process connection: G ¾ A
Probe length: 225 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0230-G1NMB 
Part no.: 1055769 
Process connection: G ¾ A
Probe length: 230 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0300-N1NMB 
Part no.: 1056927 
Process connection: ¾ NPT
Probe length: 300 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1600-N1NMB 
Part no.: 1059421 
Process connection: ¾ NPT
Probe length: 1,600 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1800-G1NMB 
Part no.: 1052083 
Process connection: G ¾ A
Probe length: 1,800 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1900-G1NMB 
Part no.: 1052084 
Process connection: G ¾ A
Probe length: 1,900 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0300-G2NMB 
Part no.: 1056287 
Process connection: G ¾ A
Probe length: 300 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP2000-G2NMB 
Part no.: 1056302 
Process connection: G ¾ A
Probe length: 2,000 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP1600-G2NMB 
Part no.: 1056298 
Process connection: G ¾ A
Probe length: 1,600 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP1500-G2NMB 
Part no.: 1056297 
Process connection: G ¾ A
Probe length: 1,500 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP1000-G2NMB 
Part no.: 1056204 
Process connection: G ¾ A
Probe length: 1,000 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP0560-G3NMB 
Part no.: 1113942 
Process connection: G ¾ A
Probe length: 560 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP0545-G3NMB 
Part no.: 1088157 
Process connection: G ¾ A
Probe length: 545 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP2000-G6CMC 
Part no.: 1088231 
Process connection: G ¾ A
Probe length: 2,000 mm
Application type/design: Remote amplifier, length of cable 2 m
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: M12 round connector x 1, 8-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP2500-G1CMB 
Part no.: 1088398 
Process connection: G ¾ A
Probe length: 2,500 mm
Application type/design: Remote amplifier, length of cable 2 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0340-G2NMB 
Part no.: 1088710 
Process connection: G ¾ A
Probe length: 340 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP1150-G1NMB 
Part no.: 1088711 
Process connection: G ¾ A
Probe length: 1,150 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0400-G7DMC 
Part no.: 1088288 
Process connection: G ¾ A
Probe length: 400 mm
Application type/design: Remote amplifier, length of cable 3.3 m
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: M12 round connector x 1, 8-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP0300-N1BMB 
Part no.: 1089060 
Process connection: ¾ NPT
Probe length: 300 mm
Application type/design: Remote amplifier, length of cable 1 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP3000-N7NMC 
Part no.: 1089160 
Process connection: ¾ NPT
Probe length: 3,000 mm
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: M12 round connector x 1, 8-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP0400-G6BMC 
Part no.: 1087712 
Process connection: G ¾ A
Probe length: 400 mm
Application type/design: Remote amplifier, length of cable 1 m
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: M12 round connector x 1, 8-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0700-G6NMC 
Part no.: 1087738 
Process connection: G ¾ A
Probe length: 700 mm
Application type/design: Standard
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: M12 round connector x 1, 8-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP2000-G6BMC 
Part no.: 1088199 
Process connection: G ¾ A
Probe length: 2,000 mm
Application type/design: Remote amplifier, length of cable 1 m
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: M12 round connector x 1, 8-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0400-G1DMB 
Part no.: 1078904 
Process connection: G ¾ A
Probe length: 400 mm
Application type/design: Remote amplifier, length of cable 3.3 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1200-G2BMB 
Part no.: 1078940 
Process connection: G ¾ A
Probe length: 1,200 mm
Application type/design: Remote amplifier, length of cable 1 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP0600-G1CMB 
Part no.: 1072997 
Process connection: G ¾ A
Probe length: 600 mm
Application type/design: Remote amplifier, length of cable 2 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0400-G3NMB 
Part no.: 1058576 
Process connection: G ¾ A
Probe length: 400 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP0320-G1NMB 
Part no.: 1084965 
Process connection: G ¾ A
Probe length: 320 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0210-G1NMB 
Part no.: 1101368 
Process connection: G ¾ A
Probe length: 210 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0800-G7DMC 
Part no.: 1100382 
Process connection: G ¾ A
Probe length: 800 mm
Application type/design: Remote amplifier, length of cable 3.3 m
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: M12 round connector x 1, 8-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP0540-G1NMB 
Part no.: 1102376 
Process connection: G ¾ A
Probe length: 540 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0500-G6CMC 
Part no.: 1101814 
Process connection: G ¾ A
Probe length: 500 mm
Application type/design: Remote amplifier, length of cable 2 m
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: M12 round connector x 1, 8-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0700-G7BMC 
Part no.: 1100203 
Process connection: G ¾ A
Probe length: 700 mm
Application type/design: Remote amplifier, length of cable 1 m
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: M12 round connector x 1, 8-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP3000-G1CMB 
Part no.: 1072031 
Process connection: G ¾ A
Probe length: 3,000 mm
Application type/design: Remote amplifier, length of cable 2 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP4000-G1BMB 
Part no.: 1072030 
Process connection: G ¾ A
Probe length: 4,000 mm
Application type/design: Remote amplifier, length of cable 1 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP3000-N1CMB 
Part no.: 1072032 
Process connection: ¾ NPT
Probe length: 3,000 mm
Application type/design: Remote amplifier, length of cable 2 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP4000-N1BMB 
Part no.: 1072033 
Process connection: ¾ NPT
Probe length: 4,000 mm
Application type/design: Remote amplifier, length of cable 1 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0500-N1DMB 
Part no.: 1071140 
Process connection: ¾ NPT
Probe length: 500 mm
Application type/design: Remote amplifier, length of cable 3.3 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0300-N1DMB 
Part no.: 1071139 
Process connection: ¾ NPT
Probe length: 300 mm
Application type/design: Remote amplifier, length of cable 3.3 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1000-N1DMB 
Part no.: 1071142 
Process connection: ¾ NPT
Probe length: 1,000 mm
Application type/design: Remote amplifier, length of cable 3.3 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0700-N1DMB 
Part no.: 1071141 
Process connection: ¾ NPT
Probe length: 700 mm
Application type/design: Remote amplifier, length of cable 3.3 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1000-N2DMB 
Part no.: 1071147 
Process connection: ¾ NPT
Probe length: 1,000 mm
Application type/design: Remote amplifier, length of cable 3.3 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP0300-G1DMB 
Part no.: 1071124 
Process connection: G ¾ A
Probe length: 300 mm
Application type/design: Remote amplifier, length of cable 3.3 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0500-G1DMB 
Part no.: 1071125 
Process connection: G ¾ A
Probe length: 500 mm
Application type/design: Remote amplifier, length of cable 3.3 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP2000-N2CMB 
Part no.: 1071146 
Process connection: ¾ NPT
Probe length: 2,000 mm
Application type/design: Remote amplifier, length of cable 2 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP0700-G1DMB 
Part no.: 1071126 
Process connection: G ¾ A
Probe length: 700 mm
Application type/design: Remote amplifier, length of cable 3.3 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1000-G2DMB 
Part no.: 1071132 
Process connection: G ¾ A
Probe length: 1,000 mm
Application type/design: Remote amplifier, length of cable 3.3 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP1000-G1DMB 
Part no.: 1071127 
Process connection: G ¾ A
Probe length: 1,000 mm
Application type/design: Remote amplifier, length of cable 3.3 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP2000-N1CMB 
Part no.: 1071138 
Process connection: ¾ NPT
Probe length: 2,000 mm
Application type/design: Remote amplifier, length of cable 2 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1000-N2BMB 
Part no.: 1071143 
Process connection: ¾ NPT
Probe length: 1,000 mm
Application type/design: Remote amplifier, length of cable 1 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP2000-N1BMB 
Part no.: 1071135 
Process connection: ¾ NPT
Probe length: 2,000 mm
Application type/design: Remote amplifier, length of cable 1 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1000-NCBMB 
Part no.: 1071145 
Process connection: ¾ NPT
Probe length: 1,000 mm
Application type/design: Remote amplifier, length of cable 2 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP1000-G1CMB 
Part no.: 1071122 
Process connection: G ¾ A
Probe length: 1,000 mm
Application type/design: Remote amplifier, length of cable 2 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP2000-G1CMB 
Part no.: 1071123 
Process connection: G ¾ A
Probe length: 2,000 mm
Application type/design: Remote amplifier, length of cable 2 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0500-N1CMB 
Part no.: 1071136 
Process connection: ¾ NPT
Probe length: 500 mm
Application type/design: Remote amplifier, length of cable 2 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP2000-G2CMB 
Part no.: 1071131 
Process connection: G ¾ A
Probe length: 2,000 mm
Application type/design: Remote amplifier, length of cable 2 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP0500-G1CMB 
Part no.: 1071121 
Process connection: G ¾ A
Probe length: 500 mm
Application type/design: Remote amplifier, length of cable 2 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1000-N1CMB 
Part no.: 1071137 
Process connection: ¾ NPT
Probe length: 1,000 mm
Application type/design: Remote amplifier, length of cable 2 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1000-G2CMB 
Part no.: 1071130 
Process connection: G ¾ A
Probe length: 1,000 mm
Application type/design: Remote amplifier, length of cable 2 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP2000-G1BMB 
Part no.: 1071120 
Process connection: G ¾ A
Probe length: 2,000 mm
Application type/design: Remote amplifier, length of cable 1 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP2000-G2BMB 
Part no.: 1071129 
Process connection: G ¾ A
Probe length: 2,000 mm
Application type/design: Remote amplifier, length of cable 1 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP1000-G2BMB 
Part no.: 1071128 
Process connection: G ¾ A
Probe length: 1,000 mm
Application type/design: Remote amplifier, length of cable 1 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP1000-N1BMB 
Part no.: 1071134 
Process connection: ¾ NPT
Probe length: 1,000 mm
Application type/design: Remote amplifier, length of cable 1 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0500-N1BMB 
Part no.: 1071133 
Process connection: ¾ NPT
Probe length: 500 mm
Application type/design: Remote amplifier, length of cable 1 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP2000-N2BMB 
Part no.: 1071144 
Process connection: ¾ NPT
Probe length: 2,000 mm
Application type/design: Remote amplifier, length of cable 1 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP0500-G1BMB 
Part no.: 1071118 
Process connection: G ¾ A
Probe length: 500 mm
Application type/design: Remote amplifier, length of cable 1 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0950-G1DMB 
Part no.: 1102746 
Process connection: G ¾ A
Probe length: 950 mm
Application type/design: Remote amplifier, length of cable 3.3 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0800-G1CMB 
Part no.: 1102899 
Process connection: G ¾ A
Probe length: 800 mm
Application type/design: Remote amplifier, length of cable 2 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0300-G1CMB 
Part no.: 1106120 
Process connection: G ¾ A
Probe length: 300 mm
Application type/design: Remote amplifier, length of cable 2 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0800-G7NMC 
Part no.: 1083766 
Process connection: G ¾ A
Probe length: 800 mm
Application type/design: Standard
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: M12 round connector x 1, 8-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP1000-G7CMC 
Part no.: 1083789 
Process connection: G ¾ A
Probe length: 1,000 mm
Application type/design: Remote amplifier, length of cable 2 m
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: M12 round connector x 1, 8-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP1000-G7DMC 
Part no.: 1083790 
Process connection: G ¾ A
Probe length: 1,000 mm
Application type/design: Remote amplifier, length of cable 3.3 m
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: M12 round connector x 1, 8-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP2000-G7CMC 
Part no.: 1083788 
Process connection: G ¾ A
Probe length: 2,000 mm
Application type/design: Remote amplifier, length of cable 2 m
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: M12 round connector x 1, 8-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP0350-G1CMB 
Part no.: 1083834 
Process connection: G ¾ A
Probe length: 350 mm
Application type/design: Remote amplifier, length of cable 2 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0560-G1BMB 
Part no.: 1107731 
Process connection: G ¾ A
Probe length: 560 mm
Application type/design: Remote amplifier, length of cable 1 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1450-N2NMB 
Part no.: 1107290 
Process connection: ¾ NPT
Probe length: 1,450 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP3900-G1NMB 
Part no.: 1065356 
Process connection: G ¾ A
Probe length: 3,900 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP2100-G1NMB 
Part no.: 1065358 
Process connection: G ¾ A
Probe length: 2,100 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP2200-G1NMB 
Part no.: 1063398 
Process connection: G ¾ A
Probe length: 2,200 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1900-N1NMB 
Part no.: 1059424 
Process connection: ¾ NPT
Probe length: 1,900 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP2800-G1NMB 
Part no.: 1064856 
Process connection: G ¾ A
Probe length: 2,800 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP2700-G1NMB 
Part no.: 1065363 
Process connection: G ¾ A
Probe length: 2,700 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP3200-G1NMB 
Part no.: 1065349 
Process connection: G ¾ A
Probe length: 3,200 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP3300-G1NMB 
Part no.: 1065350 
Process connection: G ¾ A
Probe length: 3,300 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP3400-G1NMB 
Part no.: 1065351 
Process connection: G ¾ A
Probe length: 3,400 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP2900-G1NMB 
Part no.: 1065346 
Process connection: G ¾ A
Probe length: 2,900 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP3600-G1NMB 
Part no.: 1065353 
Process connection: G ¾ A
Probe length: 3,600 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP3700-G1NMB 
Part no.: 1065354 
Process connection: G ¾ A
Probe length: 3,700 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP3800-G1NMB 
Part no.: 1065355 
Process connection: G ¾ A
Probe length: 3,800 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0600-N1NMB 
Part no.: 1059412 
Process connection: ¾ NPT
Probe length: 600 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0700-N1NMB 
Part no.: 1059413 
Process connection: ¾ NPT
Probe length: 700 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0900-N1NMB 
Part no.: 1059415 
Process connection: ¾ NPT
Probe length: 900 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0800-N1NMB 
Part no.: 1059414 
Process connection: ¾ NPT
Probe length: 800 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0840-G1NMB 
Part no.: 1062581 
Process connection: G ¾ A
Probe length: 840 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0850-G1NMB 
Part no.: 1062758 
Process connection: G ¾ A
Probe length: 850 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1350-G1NMB 
Part no.: 1065588 
Process connection: G ¾ A
Probe length: 1,350 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0510-G1NMB 
Part no.: 1057427 
Process connection: G ¾ A
Probe length: 510 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1200-N1NMB 
Part no.: 1059417 
Process connection: ¾ NPT
Probe length: 1,200 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1700-N1NMB 
Part no.: 1059422 
Process connection: ¾ NPT
Probe length: 1,700 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0330-G1NMB 
Part no.: 1056338 
Process connection: G ¾ A
Probe length: 330 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0350-G1NMB 
Part no.: 1057433 
Process connection: G ¾ A
Probe length: 350 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0450-G1NMB 
Part no.: 1057434 
Process connection: G ¾ A
Probe length: 450 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0300-G3NMB 
Part no.: 1058574 
Process connection: G ¾ A
Probe length: 300 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP0580-G3NMB 
Part no.: 1094988 
Process connection: G ¾ A
Probe length: 580 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP0700-N1BMB 
Part no.: 1096782 
Process connection: ¾ NPT
Probe length: 700 mm
Application type/design: Remote amplifier, length of cable 1 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0350-G7NMC 
Part no.: 1110353 
Process connection: G ¾ A
Probe length: 350 mm
Application type/design: Standard
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: M12 round connector x 1, 8-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP1400-G7CMC 
Part no.: 1111348 
Process connection: G ¾ A
Probe length: 1,400 mm
Application type/design: Remote amplifier, length of cable 2 m
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: M12 round connector x 1, 8-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP1350-G6NMC 
Part no.: 1111629 
Process connection: G ¾ A
Probe length: 1,350 mm
Application type/design: Remote amplifier, length of cable 2 m
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: M12 round connector x 1, 8-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0700-G7DMC 
Part no.: 1111347 
Process connection: G ¾ A
Probe length: 700 mm
Application type/design: Remote amplifier, length of cable 3.3 m
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: M12 round connector x 1, 8-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP0500-G3NMB 
Part no.: 1058577 
Process connection: G ¾ A
Probe length: 500 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP3000-G6NMC 
Part no.: 1082826 
Process connection: G ¾ A
Probe length: 3,000 mm
Application type/design: Standard
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: M12 round connector x 1, 8-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0300-N2NMB 
Part no.: 1082679 
Process connection: ¾ NPT
Probe length: 300 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP0400-N2NMB 
Part no.: 1082680 
Process connection: ¾ NPT
Probe length: 400 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP0400-G6NMC 
Part no.: 1083498 
Process connection: G ¾ A
Probe length: 400 mm
Application type/design: Standard
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: M12 round connector x 1, 8-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP3000-G1BMB 
Part no.: 1083521 
Process connection: G ¾ A
Probe length: 3,000 mm
Application type/design: Remote amplifier, length of cable 1 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0640-G1BMB 
Part no.: 1082994 
Process connection: G ¾ A
Probe length: 640 mm
Application type/design: Remote amplifier, length of cable 1 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1000-NCNMC 
Part no.: 1080638 
Process connection: ¾ NPT
Probe length: 1,000 mm
Application type/design: Standard
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Cable connector M12 x 1, 8-polig
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0500-N6NMC 
Part no.: 1080639 
Process connection: ¾ NPT
Probe length: 500 mm
Application type/design: Standard
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: M12 round connector x 1, 8-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0500-NCNMC 
Part no.: 1080641 
Process connection: ¾ NPT
Probe length: 500 mm
Application type/design: Standard
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Cable connector M12 x 1, 8-polig
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1000-NANMB 
Part no.: 1080637 
Process connection: ¾ NPT
Probe length: 1,000 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Cable connector M12 x 1, 5-polig
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP2000-NANMB 
Part no.: 1080635 
Process connection: ¾ NPT
Probe length: 2,000 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Cable connector M12 x 1, 5-polig
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP2000-GBNMB 
Part no.: 1080631 
Process connection: G ¾ A
Probe length: 2,000 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Cable connector M12 x 1, 5-polig
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP2000-N6NMC 
Part no.: 1080634 
Process connection: ¾ NPT
Probe length: 2,000 mm
Application type/design: Standard
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: M12 round connector x 1, 8-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP2000-G6NMC 
Part no.: 1080628 
Process connection: G ¾ A
Probe length: 2,000 mm
Application type/design: Standard
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: M12 round connector x 1, 8-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1000-GDNMC 
Part no.: 1080627 
Process connection: G ¾ A
Probe length: 1,000 mm
Application type/design: Standard
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Cable connector M12 x 1, 8-polig
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP2000-GANMB 
Part no.: 1080630 
Process connection: G ¾ A
Probe length: 2,000 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Cable connector M12 x 1, 5-polig
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP2000-G7NMC 
Part no.: 1080629 
Process connection: G ¾ A
Probe length: 2,000 mm
Application type/design: Standard
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: M12 round connector x 1, 8-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP1000-G6NMC 
Part no.: 1077065 
Process connection: G ¾ A
Probe length: 1,000 mm
Application type/design: Standard
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: M12 round connector x 1, 8-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1000-GBNMB 
Part no.: 1080625 
Process connection: G ¾ A
Probe length: 1,000 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Cable connector M12 x 1, 5-polig
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP1000-GANMB 
Part no.: 1080624 
Process connection: G ¾ A
Probe length: 1,000 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Cable connector M12 x 1, 5-polig
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0500-GANMB 
Part no.: 1080619 
Process connection: G ¾ A
Probe length: 500 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Cable connector M12 x 1, 5-polig
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0500-GCNMC 
Part no.: 1080621 
Process connection: G ¾ A
Probe length: 500 mm
Application type/design: Standard
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Cable connector M12 x 1, 8-polig
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0500-G7NMC 
Part no.: 1080618 
Process connection: G ¾ A
Probe length: 500 mm
Application type/design: Standard
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: M12 round connector x 1, 8-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP0500-GBNMB 
Part no.: 1080620 
Process connection: G ¾ A
Probe length: 500 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Cable connector M12 x 1, 5-polig
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP0500-G6NMC 
Part no.: 1080617 
Process connection: G ¾ A
Probe length: 500 mm
Application type/design: Standard
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: M12 round connector x 1, 8-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1000-G7NMC 
Part no.: 1080623 
Process connection: G ¾ A
Probe length: 1,000 mm
Application type/design: Standard
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: M12 round connector x 1, 8-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP1600-G1CMB 
Part no.: 1093367 
Process connection: G ¾ A
Probe length: 1,600 mm
Application type/design: Remote amplifier, length of cable 2 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0810-GANMB 
Part no.: 1093545 
Process connection: G ¾ A
Probe length: 810 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Cable connector M12 x 1, 5-polig
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP2400-G1CMB 
Part no.: 1093368 
Process connection: G ¾ A
Probe length: 2,400 mm
Application type/design: Remote amplifier, length of cable 2 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1500-G6NMC 
Part no.: 1094281 
Process connection: G ¾ A
Probe length: 1,500 mm
Application type/design: Standard
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: M12 round connector x 1, 8-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0240-G1NMB 
Part no.: 1094257 
Process connection: G ¾ A
Probe length: 240 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0810-G1NMB 
Part no.: 1093546 
Process connection: G ¾ A
Probe length: 810 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP4000-G6NMC 
Part no.: 1094114 
Process connection: G ¾ A
Probe length: 4,000 mm
Application type/design: Standard
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: M12 round connector x 1, 8-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP2200-G1CMB 
Part no.: 1094308 
Process connection: G ¾ A
Probe length: 2,200 mm
Application type/design: Remote amplifier, length of cable 2 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0400-N6NMC 
Part no.: 1093212 
Process connection: ¾ NPT
Probe length: 400 mm
Application type/design: Standard
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: M12 round connector x 1, 8-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP2200-G6CMC 
Part no.: 1094309 
Process connection: G ¾ A
Probe length: 2,200 mm
Application type/design: Remote amplifier, length of cable 2 m
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: M12 round connector x 1, 8-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0440-G1NMB 
Part no.: 1086579 
Process connection: G ¾ A
Probe length: 440 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0300-G6NMC 
Part no.: 1087129 
Process connection: G ¾ A
Probe length: 300 mm
Application type/design: Standard
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: M12 round connector x 1, 8-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1000-G7BMC 
Part no.: 1087350 
Process connection: G ¾ A
Probe length: 1,000 mm
Application type/design: Remote amplifier, length of cable 1 m
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: M12 round connector x 1, 8-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP0300-G6BMC 
Part no.: 1087135 
Process connection: G ¾ A
Probe length: 300 mm
Application type/design: Remote amplifier, length of cable 1 m
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: M12 round connector x 1, 8-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP2000-G1NMBL 
Part no.: 1073552 
Process connection: G ¾ A
Probe length: 2,000 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP1000-G1NMBL 
Part no.: 1073551 
Process connection: G ¾ A
Probe length: 1,000 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0250-G6NMC 
Part no.: 1092136 
Process connection: G ¾ A
Probe length: 250 mm
Application type/design: Standard
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: M12 round connector x 1, 8-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0600-G6CMC 
Part no.: 1092076 
Process connection: G ¾ A
Probe length: 600 mm
Application type/design: Remote amplifier, length of cable 2 m
Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: M12 round connector x 1, 8-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP2000-G3NMB 
Part no.: 1058592 
Process connection: G ¾ A
Probe length: 2,000 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP1700-G1BMB 
Part no.: 1098754 
Process connection: G ¾ A
Probe length: 1,700 mm
Application type/design: Remote amplifier, length of cable 1 m
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +180 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0640-G3NMB 
Part no.: 1090054 
Process connection: G ¾ A
Probe length: 640 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP0940-G3NMB 
Part no.: 1090056 
Process connection: G ¾ A
Probe length: 940 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP0940-G1NMB 
Part no.: 1090055 
Process connection: G ¾ A
Probe length: 940 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0510-G3NMB 
Part no.: 1090053 
Process connection: G ¾ A
Probe length: 510 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP0900-G2NMB 
Part no.: 1056292 
Process connection: G ¾ A
Probe length: 900 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP0700-G2NMB 
Part no.: 1056290 
Process connection: G ¾ A
Probe length: 700 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP0800-G2NMB 
Part no.: 1056291 
Process connection: G ¾ A
Probe length: 800 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP1900-G2NMB 
Part no.: 1056301 
Process connection: G ¾ A
Probe length: 1,900 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP1800-G2NMB 
Part no.: 1056300 
Process connection: G ¾ A
Probe length: 1,800 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP1700-G2NMB 
Part no.: 1056299 
Process connection: G ¾ A
Probe length: 1,700 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP1400-G2NMB 
Part no.: 1056296 
Process connection: G ¾ A
Probe length: 1,400 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP1300-G2NMB 
Part no.: 1056295 
Process connection: G ¾ A
Probe length: 1,300 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP1200-G21NMB 
Part no.: 1056294 
Process connection: G ¾ A
Probe length: 1,200 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP1100-G2NMB 
Part no.: 1056293 
Process connection: G ¾ A
Probe length: 1,100 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP3000-N2NMB 
Part no.: 1112666 
Process connection: ¾ NPT
Probe length: 3,000 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP2200-G2NMB 
Part no.: 1112190 
Process connection: G ¾ A
Probe length: 2,200 mm
Application type/design: Standard
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Process temperature: –20 °C ... +150 °C
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover
 
LFP0025-C1NMB 
Part no.: 1075950 
Process connection: G ¾ A
Probe type: Without probe
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0025-D1NMB 
Part no.: 1080615 
Process connection: ¾ NPT
Probe type: Without probe
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With viewing window made from PMMA (acrylic glass)
 
LFP0025-D2NMB 
Part no.: 1075953 
Process connection: ¾ NPT
Probe type: Without probe
Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Connection type: Round connector M12 x 1, 5-pin
Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK
Housing design: With closed cover