Magnescale DF Digital Probe
The Magnescale DF Digital Probes have a slim shape with a stem diameter of 8mm and high durability ball spline bearing. With such a slim diameter the DF series also comes with the option of a flange. This flange will make installation easier, due to the much lower probability of the gauge breaking or bending.
The DF Probes come measuring ranges of 5mm, 12mm, and 30mm. Most commonly sold are the 5mm and 12mm ranges. Both of these ranges come in spring and spring/vacuum push. The 12mm probe also comes in a pneumatic (air) push option.
The DF probes have a 1.0 um accuracy throughout the 5 and 12mm measuring ranges. The feeler of the probe is a carbide ball tip with a mounting screw M2.5.
The Magnescale DF digital probe has high resolution. With being slim and compact the gauge delivers a 0.1 micron maximum resolution.
Magnescale DF805SFLR
Magnescale DF805SFR
Magnescale DF805SLR
Magnescale DF805SR
Magnescale DF812SFLR
Magnescale DF812SFR
Magnescale DF812SLR
Magnescale DF812SR
Magnescale DG Probes
The Magnescale DG Series Probes provide a range of accuracies depending on what is needed in you facility (2um-6um). DG Series probes come in measuring lengths of 50, 100, 110, 155, and 205 mm.
Magnescale DG100BP
Magnescale DG100BPE
Magnescale DG100BPM
Magnescale DG10BN
Magnescale DG10BP
Magnescale DG10BPE
Magnescale DG10BPL010
Magnescale DG10BPL015
Magnescale DG10BPM
Magnescale DG10BS
Magnescale DG10BSE
Magnescale DG10BSL010
Magnescale DG10BSL015
Magnescale DG10BSM
Magnescale DG155BP
Magnescale DG155BPE
Magnescale DG155BPM
Magnescale DG205BP
Magnescale DG205BPE
Magnescale DG205BPM
Magnescale DG25BN
Magnescale DG25BP
Magnescale DG25BPE
Magnescale DG25BPL010
Magnescale DG25BPL015
Magnescale DG25BPM
Magnescale DG25BS
Magnescale DG25BSE
Magnescale DG25BSL010
Magnescale DG25BSL015
Magnescale DG25BSM
Magnescale DG50BN
Magnescale DG50BP
Magnescale DG50BPE
Magnescale DG50BPM
Magnescale DG50BPM-1FT
Magnescale DG810B
Magnescale DG810BE
Magnescale DG810BL
Magnescale DG810BLE
Magnescale DG810BLM
Magnescale DG810BM
Magnescale DG810F
Magnescale DG810FE
Magnescale DG810FL
Magnescale DG810FLE
Magnescale DG810FLM
Magnescale DG810FLM-1FT
Magnescale DK Probe Series
The Magnescale DK probes are the most popular probes that Magnescale offers.
The DK805S and DK812S have an 8mm diameter and are available in various configurations. These configurations include spring push or pneumatic push, and straight or right angle cable exit. These DK probes have a flange option that is available. Measurement Technologies recommends the flange version because it eliminates any damage when mounting the probe.
In addition, the DK probes have a 30mm stroke version available. It is extremely accurate and comes in a straight, right angle with spring push, The DK830 series also comes with a pneumatic push version. (DK830SVR)
Magnescale DK probes have several versions in a 20mm barrel diameter. The travels available are 10mm, 25mm, 50mm, and 100mm. All of these probes come with a low measuring force option. The Magnescale DK10 and DK25 series come in a straight cable exit or a right angle.
Finally, Magnescale DK probes have a 155mm or 205mm stroke available. These probes have a 32mm barrel diameter. Both of these probes have a magnetic tip and movement is by gravity. However, the magnetic tip can be removed and a DZ-191 coupling can be added for movement.
All DK Probes are compatible with the MG80 interface module. These modules give the user the option to hook up all DK probes via Ethernet, EtherNet/IP, Profinet, EtherCat or RS232.
Along with the MG80, Magnescale LT30 Displays are made to take in the DK series probes. LT30 come in 1 or 2 axis and ideal for panel mounting..
Magnescale DL-B Probes
The Magnescale DL-B Probes are slim compact gauges. Their compact design is ideal for designing and incorporating into machines. These gauges have excellent resistance to workshop conditions like dust and vibration (DL310B: IP64). The DL-B can hook-up to a LT20A, along with any module that takes an A/B phase output by open collector.
Magnescale DL-B Probes have two different measuring ranges, 10 mm (DL310B) and 30 mm (DL330B). Both of these have an accuracy of ± 5 μm. With a fast max response speed of 120 m/min. A 3 mm diameter carbide ball feeler tip comes stock with the probe and a M2.5 x 0.45 thread. The mounting area for the gauge is 8 mm in diameter.
On the DL310B bellows and an air lift joint come stock.
There are optional accessories that can be purchased. Those include a bellows set for the DL330B (DZ301). A roller feeler (DZ-100). Coupling (DZ-191)
Magnescale DL310B
Magnescale DL330B
Magnescale DS Probes
The NEW Magnescale DS Series gaging probes offered USB output straight from the probe to a computer or multiple units can be plugged in a powered USB hub.
The DS805S and DS812S have an 8mm diameter and are available in various configurations. These configurations include spring push or pneumatic push, and straight or right angle cable exit. These DS probes have a flange option that is available. Measurement Technologies recommends the flange version because it eliminates any damage when mounting the probe.
In addition, the DS probes have a 30mm stroke version available. It is extremely accurate and comes in a straight, right angle with spring push, The DS830 series also comes with a pneumatic push version. (DS830SVR)
Magnescale DS probes have several versions in a 20mm barrel diameter. The travels available are 10mm, 25mm, 50mm, and 100mm. All of these probes come with a low measuring force option. The Magnescale DS10 and DS25 series come in a straight cable exit or a right angle.
Finally, Magnescale DS probes have a 155mm or 205mm stroke available. These probes have a 32mm barrel diameter. Both of these probes have a magnetic tip and movement is by gravity. However, the magnetic tip can be removed and a DZ-191 coupling can be added for movement.
Magnescale DT Probes
Magnescale DT series probes are truly a digital probe. They require no calibration for the entire life of the probe. The Magnescale DT series comes in 12MM (DT12/512) and 32MM (DT32) sizes.
The DT12 series comes primarily in a spring push version, but a pneumatic version is possible with the (DZ176) accessory. However, the DT32 series is available in both a spring push and pneumatic push version. Protective bellows are optional on both these models. The accuracy of the DT12 and DT32 models is ± 5.0um.
The DT512 series probes come with or without bellows and in a spring push version, but can also be converted to pneumatic push with the (DZ176) accessory. The accuracy of the DT512 series is ± 3.0um.
The DT series has excellent resistance to oil, water, dust, vibration, shock, and all other workshop conditions. This resistance is equivalent to an IP64 grading in the DT/P series only.
Magnescale DT probes all come with a steel ball tip feeler with a diameter of 3mm, M2.5 x 0.45 thread.
The DT12/32 series is compatible with the LT10A display. The LT10A display gives out a 0.0002″ resolution with the capability of 1-2 input channels.
The DT512 series can be hooked up to the LT11A display. The LT11A gives out a 0.0001″ resolution with the capability of 1-2 input channels.
The Magnescale DT series probe is plugs directly into a LT series display that gives out RS232, BCD or just a (GO/NO GO) signal. There are also interface modules that are available for the DT series. The MT13 interpolator will be needed for the DT probes to be connected to the MG80 module system if you want to connect several probes at once. The MT14 interpolator can be used to connect the gauge to any generic A/B phase counter. If you want the measurements from the DT32 or DT512 to be sent directly to the computer you will need the optional MT30 connector which is hooked up via USB.
Magnescale Readouts
Magnescale LH70 displays come in 1, 2 or 3-axis. The Magnescale readout display can be configured to be used on a mill, lathe or grinder. It has the capability to take in the older series Magnescale, formerly Sony, scales. Check out our selection of Magnescale readout displays at Measurement Technologies.
If you need help finding the right Magnescale LH70 display, contact us today to request a quote or talk to an expert!
Magnescale LT10A Displays
The Magnescale LT10A displays come in 1 or 2 Axis. This series is made to take in the Magnescale DT12 and DT32 series digital probes.
The compact design (DIN Standard) 72mm x 72mm makes it ideal for panel mounting.
The Magnescale LT10A displays have selectable resolutions of 5 or 10um. If you need to display in inches, 0.0002″, or 0.0005″ are available.
In addition, GO/NO-GO output is standard on all models of the LT10A series. The LT10A is also available in BCD and RS-232C Output. The LT10A has the option to measure the current value, the maximum and minimum values, and peak-to-peak values. In addition, the 2-Axis display has an Add/Subtract feature that is standard on these units.
The LT10A BCD series comes with up to 4 different comparator upper and lower limit settings. While the RS232C output version has 1 setting available.
Some of the other standard features on the display are reset, preset, high, go, and lower limit lights.
Magnescale LT11A Displays
The Magnescale LT11A displays come in 1 or 2 Axis. This series is made to take in the Magnescale DT512 series digital probes.
The compact design (DIN Standard) 72mm x 72mm makes it ideal for panel mounting.
The Magnescale LT11A displays have selectable resolutions of 1, 5, 10um. If you need to display in inches, 0.0001″, 0.0002″, or 0.0005″ are available.
In addition, GO/NO-GO output is standard on all models of the LT11A series. The LT11A is also available in BCD and RS-232C Output. The LT11A has the option to measure the current value, the maximum and minimum values, and peak-to-peak values. In addition, the 2-Axis display has an Add/Subtract feature that is standard on these units.
The LT11A BCD series comes with up to 4 different comparator upper and lower limit settings. While the RS232C output version has 1 setting available.
Some of the other standard features on the display are reset, preset, high, go, and lower limit lights.
Magnescale LT20A Displays
The Magnescale LT20A displays come in 1 or 2 Axis. This series is made to take in the Magnescale DG series digital probes. It will also take in the Magnescale DK series with a DZ262 adapter.
The compact design (DIN Standard) 72mm x 72mm makes it ideal for panel mounting.
The Magnescale LT20A displays have selectable resolutions of 0.5 1, 5, 10um. If you need to display in inches, 0.00002″ 0.0001″, 0.0002″, or 0.0005″ are available.
In addition, GO/NO-GO output is standard on all models of the LT20A series. The LT20A is also available in BCD and RS-232C Output. The LT20A has the option to measure the current value, the maximum and minimum values, and peak-to-peak values. In addition, the 2-Axis display has an Add/Subtract feature that is standard on these units.
The LT20A BCD series comes with up to 4 different comparator upper and lower limit settings. While the RS232C output version has 1 setting available.
Some of the other standard features on the display are reset, preset, high, go, and lower limit lights.
Magnescale LT30 Displays
The Magnescale LT30 displays come in 1 or 2 Axis. This series is made to take in the Magnescale DK series digital probes.
The compact design (DIN Standard) 72mm x 72mm makes it ideal for panel mounting.
The Magnescale LT30 displays have selectable resolutions of 0.5 1, 5, 10um. If you need to display in inches, 0.00002″ 0.0001″, 0.0002″, or 0.0005″ are available.
In addition, GO/NO-GO output is standard on all models of the LT30 series. The LT30 is also available in BCD and RS-232C Output. The LT30 has the option to measure the current value, the maximum and minimum values, and peak-to-peak values. In addition, the 2-Axis display has an Add/Subtract feature that is standard on these units.
The LT30 BCD series comes with up to 4 different comparator upper and lower limit settings. While the RS232C output version has 1 setting available.
Some of the other standard features on the display are reset, preset, high, go, and lower limit lights.
Magnescale MG80 Interface Module
The NEW Magnescale MG80 Interface Modules allow you to hook-up 64, 255, and 65,535 gauges (depending on the model). The Magnescale DK800S, DK, and DT series gauges can be hooked-up via EtherNet, EtherNet/IP, EtherCAT, and PROFINET to a PC or PLC.
The MG80-CM is a 1 axis counter module that works along with the main module. This counter module is for the DK800S, DK, and DT series gauges. One of these counter modules will be needed for every gauge used. A MT13 interpolator is required to hook-up the DT series gauges to the module.
All Magnescale MG80 Interface Modules have resolution selection (0.1 to 10 um), reference point setting, reset, preset, master preset, current value / maximum value / minimum value / P-P value output of each axis, calculation function (2-axis addition and subtraction), comparator function (up yo 8 set of 2 or 4 steps can be set). The MG80’s can be mounted by a 35 mm DIN rail mount. The maximum cable length that can be used is 20 m (shielded CAT5e recommended).
The MG80-NE has an EtherNet (TCP/IP) 100Base-TX output. There can be 16 MG80-CM units connected to each MG80-NE, and up to 64 gauges can be hooked-up (via link connection).
The MG80-EI has an EtherNet/IP output. There can be 16 MG80-CM units connected to the MG80-EI, and up to 255 gauges can be hooked-up (via link connection).
The MG80-PN has a PROFINET output. There can be 16 MG80-CM units connected to the MG80-PN, and up to 255 gauges can be hooked-up (via fieldbus IP address configuration).
The MG80-EC has an EtherCAT output. There can be 16 MG80-CM units connected to the MG80-EC, and up tp 65,535 gauges can be hooked-up (via link connection).
The Magnescale MG80 Interface Modules allows the data that is collected from the measuring unit to be sent to a PLC or PC via EtherNet, EtherNet/IP, PROFINET, or EtherCAT fieldbus.
Magnescale GBP Series
Magnescale GBP Series have been around for at least 20 years and is a very durable scale. The GBP scale is a magnetic scale that holds up in difficult environments. Coolant, chips, dirt and dust are typically no problem for the GBP scales
This scale is ideal replacement for SR50 or SR30 series scales. For the SR50 and SR30 series, you will need to drill new mounting holes for the scale. However, you can use your existing cable that you have for the SR50 or SR30 series scale.
The GBP series was developed for some OEMs, such as Gerber Coburn.
Magnescale SR128 Scales
Magnescale SR128 Scales have been around for at least 20 years and is a very durable scale. The SR128 is a magnetic scale that holds up in difficult environments. Coolant, chips, dirt and dust are typically no problem for the SR128 scales
This scale is ideal replacement for some of the older Magnescales. Older scales like the SR1711, SR50 or SR108 series scales can all be replaced by Magnescale SR128 scale. For the SR1711 and SR50 series, you will need to drill new mounting holes for the scale. However, if you are replacing a SR108 series scale, it is a drop in replacement. You will have to purchase a new cable, more than likely for all scales.
When it comes to the Magnescale product line, call the experts and we will give you the best option available. Some distributors will tell you that you need an entire new system. We pride ourselves in giving you the best option available.
dienelectrics@gmail.com
0909186879 
