Magnescale LT11A-101B | Digital Gauge -Đồng hồ kỹ thuật số 1-Axis Màn hình LCD với ngõ ra Go/No Go và BCD

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm MAGNESCALE

• 

  Magnescale parts

• Xem thêm

Đồng hồ kỹ thuật số Magnescale LT11A-101B | Digital Gauge

(1-Axis Màn hình LCD với ngõ ra Go/No Go và BCD)
Compact, lightweight, and easy-to-mount display unit for DT512


- Compact size : DIN standard (72 mm x 72mm / 2.83″ x 2.83″ W x H)
- Resolution: Selectable from 1, 5, 10 μm
- Suitable for panel mounting
- Direct interfacing from display unit to PLC or computer
- Current values, maximum, minimum, peak-to-peak values and GO/NO GO evaluation included as standard functions.
- ADD/SUB function (2-channel model)
- Full lineup for various applications
 

Specifications

Display
I/O	Measuring unit input	1 CH
	I/O connectors*1	○
	BCD*2	○
	RS-232C*3	–
	RS-TRG*4	–
Reset function		Reset key or external input (I/O connectors)
		BCD terminal
Preset function		Preset value set with preset key, recalled with reset key.
		Recalled with BCD reset terminal
Comparetor function		Three-level comparator: Comparator value set with keys on the front panel. Result evaluation: LED and I/O connector output (photocoupler)
		Up to 4 values can be set for comparator (key input). Switched with BCD terminal.
Peak Hold function		Maximum, minimum, and peak-to-peak values. Measuring started by the start input of the I/O connector; update stop by pause input.
		–
Resolution		Selectable from 0.001 mm, 0.005 mm, 0.01 mm
Direction		Can be switched
Reference point function		Function use enabled/disabled can be selected (if use is enabled, the unit enters reference point signal input wait status at the same time as power-on).
Maximum response speed		100 m/min
Addition and subtraction function		–
Alarm		Speed over or measuring unit cable disconnected (Displayed on LCD or the I/O connector’s comparator outputs are all “H” (OFF).)
		BCD alarm terminal “H” (OFF)
Data storage		Resolution, direction, comparator value, preset value, modes, etc.
		BCD sign
key lock function		key lock and release.
Temperature		Operating:0～40℃, Storage:-10～50℃
Power consumption*5		2.9W
Mass		Approx. 230g
Power supply		Power input connector (3 pins) : DC9.0-26.4 V
Compatible measuring unit		DT512P/N
*1 I/O connector Input : Reset, peak-hold start, peak-hold pause, RS trigger (RS-232C models only) Output : Result evaluation (photocoupler)
*2 BCD (36 pin half-pitch connector) Input : Reset, peak-hold start, comparator value selection (4 settings) Output : five digits (open collector)One of current value/maximum value/minimum value/peak-to-peak value selected and output. Alarm output
*3 RS-232C (8 pin mini-DIN connector) Reset, preset value setting/recall, peak-hold start, peak-hold pause
*4 RS-TRG pin Trigger input for RS-232C data output
*5 With measuring unit connected.
Magnescale reserves the right to change product specifications without prior notice.

Tham khảo thêm các Model tương tự cùng loại:
Model

LT11A-101

Display		6 digit, backlight LCD, mode display
I/O	Measuring unit input	1 CH
	I/O connectors*1	○
	BCD*2	–
	RS-232C*3	–
	RS-TRG*4	–
Reset function		Reset key or external input (I/O connectors)
		–
Preset function		Preset value set with preset key, recalled with reset key.
		–
Comparetor function		Three-level comparator: Comparator value set with keys on the front panel. Result evaluation: LED and I/O connector output (photocoupler)
		–
Peak Hold function		Maximum, minimum, and peak-to-peak values. Measuring started by the start input of the I/O connector; update stop by pause input.
		–
Resolution		Selectable from 0.001 mm, 0.005 mm, 0.01 mm
Direction		Can be switched
Reference point function		Function use enabled/disabled can be selected (if use is enabled, the unit enters reference point signal input wait status at the same time as power-on).
Maximum response speed		100 m/min
Addition and subtraction function		–
Alarm		Speed over or measuring unit cable disconnected (Displayed on LCD or the I/O connector’s comparator outputs are all “H” (OFF).)
		–
Data storage		Resolution, direction, comparator value, preset value, modes, etc.
		–
key lock function		key lock and release.
Temperature		Operating:0～40℃, Storage:-10～50℃
Power consumption*5		1.8W
Mass		Approx. 200g
Power supply		Power input connector (3 pins) : DC9.0-26.4 V
Compatible measuring unit		DT512P/N
*1 I/O connector Input : Reset, peak-hold start, peak-hold pause, RS trigger (RS-232C models only) Output : Result evaluation (photocoupler)
*2 BCD (36 pin half-pitch connector) Input : Reset, peak-hold start, comparator value selection (4 settings) Output : five digits (open collector)One of current value/maximum value/minimum value/peak-to-peak value selected and output. Alarm output
*3 RS-232C (8 pin mini-DIN connector) Reset, preset value setting/recall, peak-hold start, peak-hold pause
*4 RS-TRG pin Trigger input for RS-232C data output
*5 With measuring unit connected.

Model

LT11A-101C

Display
I/O	Measuring unit input	1 CH
	I/O connectors*1	○
	BCD*2	–
	RS-232C*3	○
	RS-TRG*4	○
Reset function		Reset key or external input (I/O connectors)
		RS-232C command
Preset function		Preset value set with preset key, recalled with reset key.
		Set or recalled with RS-232C command
Comparetor function		Three-level comparator: Comparator value set with keys on the front panel. Result evaluation: LED and I/O connector output (photocoupler)
		Set with RS-232C command
Peak Hold function		Maximum, minimum, and peak-to-peak values. Measuring started by the start input of the I/O connector; update stop by pause input.
		RS-232C can set or start.
Resolution		Selectable from 0.001 mm, 0.005 mm, 0.01 mm
Direction		Can be switched
Reference point function		Function use enabled/disabled can be selected (if use is enabled, the unit enters reference point signal input wait status at the same time as power-on).
Maximum response speed		100 m/min
Addition and subtraction function		–
Alarm		Speed over or measuring unit cable disconnected (Displayed on LCD or the I/O connector’s comparator outputs are all “H” (OFF).)
		–
Data storage		Resolution, direction, comparator value, preset value, modes, etc.
		Data signaling rate, etc.
key lock function		key lock and release.
Temperature		Operating:0～40℃, Storage:-10～50℃
Power consumption*5		2.0W
Mass		Approx. 220g
Power supply		Power input connector (3 pins) : DC9.0-26.4 V
Compatible measuring unit		DT512P/N
*1 I/O connector Input : Reset, peak-hold start, peak-hold pause, RS trigger (RS-232C models only) Output : Result evaluation (photocoupler)
*2 BCD (36 pin half-pitch connector) Input : Reset, peak-hold start, comparator value selection (4 settings) Output : five digits (open collector)One of current value/maximum value/minimum value/peak-to-peak value selected and output. Alarm output
*3 RS-232C (8 pin mini-DIN connector) Reset, preset value setting/recall, peak-hold start, peak-hold pause
*4 RS-TRG pin Trigger input for RS-232C data output
*5 With measuring unit connected.
Magnescale reserves the right to change product specifications without prior notice.

Model 

LT11A-201

Display
I/O	Measuring unit input	2 CH
	I/O connectors*1	○
	BCD*2	–
	RS-232C*3	–
	RS-TRG*4	–
Reset function		Reset key or external input (I/O connectors)
		–
Preset function		Preset value set with preset key, recalled with reset key.
		–
Comparetor function		Three-level comparator: Comparator value set with keys on the front panel. Result evaluation: LED and I/O connector output (photocoupler)
		–
Peak Hold function		Maximum, minimum, and peak-to-peak values. Measuring started by the start input of the I/O connector; update stop by pause input.
		–
Resolution		Selectable from 0.001 mm, 0.005 mm, 0.01 mm
Direction		Can be switched
Reference point function		Function use enabled/disabled can be selected (if use is enabled, the unit enters reference point signal input wait status at the same time as power-on).
Maximum response speed		100 m/min
Addition and subtraction function		A+B, A-B, B-A can be set with the direction setting.
Alarm		Speed over or measuring unit cable disconnected (Displayed on LCD or the I/O connector’s comparator outputs are all “H” (OFF).)
		–
Data storage		Resolution, direction, comparator value, preset value, modes, etc.
		–
key lock function		key lock and release.
Temperature		Operating:0～40℃, Storage:-10～50℃
Power consumption*5		2.3W
Mass		Approx. 210g
Power supply		Power input connector (3 pins) : DC9.0-26.4 V
Compatible measuring unit		DT512P/N
*1 I/O connector Input : Reset, peak-hold start, peak-hold pause, RS trigger (RS-232C models only) Output : Result evaluation (photocoupler)
*2 BCD (36 pin half-pitch connector) Input : Reset, peak-hold start, comparator value selection (4 settings) Output : five digits (open collector)One of current value/maximum value/minimum value/peak-to-peak value selected and output. Alarm output
*3 RS-232C (8 pin mini-DIN connector) Reset, preset value setting/recall, peak-hold start, peak-hold pause
*4 RS-TRG pin Trigger input for RS-232C data output
*5 With measuring unit connected.
Magnescale reserves the right to change product specifications without prior notice.

Model 

LT11A-201B

Display
I/O	Measuring unit input	2 CH
	I/O connectors*1	○
	BCD*2	○
	RS-232C*3	–
	RS-TRG*4	–
Reset function		Reset key or external input (I/O connectors)
		BCD terminal
Preset function		Preset value set with preset key, recalled with reset key.
		Recalled with BCD reset terminal
Comparetor function		Three-level comparator: Comparator value set with keys on the front panel. Result evaluation: LED and I/O connector output (photocoupler)
		Up to 4 values can be set for comparator (key input). Switched with BCD terminal.
Peak Hold function		Maximum, minimum, and peak-to-peak values. Measuring started by the start input of the I/O connector; update stop by pause input.
		–
Resolution		Selectable from 0.001 mm, 0.005 mm, 0.01 mm
Direction		Can be switched
Reference point function		Function use enabled/disabled can be selected (if use is enabled, the unit enters reference point signal input wait status at the same time as power-on).
Maximum response speed		100 m/min
Addition and subtraction function		A+B, A-B, B-A can be set with the direction setting.
Alarm		Speed over or measuring unit cable disconnected (Displayed on LCD or the I/O connector’s comparator outputs are all “H” (OFF).)
		BCD alarm terminal “H” (OFF)
Data storage		Resolution, direction, comparator value, preset value, modes, etc.
		BCD sign
key lock function		key lock and release.
Temperature		Operating:0～40℃, Storage:-10～50℃
Power consumption*5		4.0W
Mass		Approx. 270g
Power supply		Power input connector (3 pins) : DC9.0-26.4 V
Compatible measuring unit		DT512P/N
*1 I/O connector Input : Reset, peak-hold start, peak-hold pause, RS trigger (RS-232C models only) Output : Result evaluation (photocoupler)
*2 BCD (36 pin half-pitch connector) Input : Reset, peak-hold start, comparator value selection (4 settings) Output : five digits (open collector)One of current value/maximum value/minimum value/peak-to-peak value selected and output. Alarm output
*3 RS-232C (8 pin mini-DIN connector) Reset, preset value setting/recall, peak-hold start, peak-hold pause
*4 RS-TRG pin Trigger input for RS-232C data output
*5 With measuring unit connected.
Magnescale reserves the right to change product specifications without prior notice.

Model 

LT11A-201C

Display
I/O	Measuring unit input	2 CH
	I/O connectors*1	○
	BCD*2	–
	RS-232C*3	○
	RS-TRG*4	○
Reset function		Reset key or external input (I/O connectors)
		RS-232C command
Preset function		Preset value set with preset key, recalled with reset key.
		Set or recalled with RS-232C command
Comparetor function		Three-level comparator: Comparator value set with keys on the front panel. Result evaluation: LED and I/O connector output (photocoupler)
		Set with RS-232C command
Peak Hold function		Maximum, minimum, and peak-to-peak values. Measuring started by the start input of the I/O connector; update stop by pause input.
		RS-232C can set or start.
Resolution		Selectable from 0.001 mm, 0.005 mm, 0.01 mm
Direction		Can be switched
Reference point function		Function use enabled/disabled can be selected (if use is enabled, the unit enters reference point signal input wait status at the same time as power-on).
Maximum response speed		100 m/min
Addition and subtraction function		A+B, A-B, B-A can be set with the direction setting.
Alarm		Speed over or measuring unit cable disconnected (Displayed on LCD or the I/O connector’s comparator outputs are all “H” (OFF).)
		–
Data storage		Resolution, direction, comparator value, preset value, modes, etc.
		Data signaling rate, etc.
key lock function		key lock and release.
Temperature		Operating:0～40℃, Storage:-10～50℃
Power consumption*5		2.5W
Mass		Approx. 230g
Power supply		Power input connector (3 pins) : DC9.0-26.4 V
Compatible measuring unit		DT512P/N
*1 I/O connector Input : Reset, peak-hold start, peak-hold pause, RS trigger (RS-232C models only) Output : Result evaluation (photocoupler)
*2 BCD (36 pin half-pitch connector) Input : Reset, peak-hold start, comparator value selection (4 settings) Output : five digits (open collector)One of current value/maximum value/minimum value/peak-to-peak value selected and output. Alarm output
*3 RS-232C (8 pin mini-DIN connector) Reset, preset value setting/recall, peak-hold start, peak-hold pause
*4 RS-TRG pin Trigger input for RS-232C data output
*5 With measuring unit connected.
Magnescale reserves the right to change product specifications without prior notice.

 

- Xem chi tiết Tài liệu kỹ thuật/ Datasheet Magnescale LT11A