Bộ nguồn Phoenix Contact STEP-PS/ 1AC/24DC/4.2 - 2868664 | 1-phase 24VDC 0.5A

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm PHOENIX CONTACT

• 

  Video về Tìm hiểu chi tiết dòng sản phẩm Bộ nguồn LOGO Power của Siemens

• 

  Các model Cấp nguồn và phụ kiện của AB Allen-Bradley | Rockwell Automation Power supplies and accessories

• Xem thêm

Phoenix Contact STEP-PS/ 1AC/24DC/4.2 - 2868664 là bộ cấp nguồn STEP POWER, gắn DIN rail, đầu vào 1 pha, đầu ra 24VDC 0.5A

Primary-switched STEP POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/4.2 A
 

- Xem chi tiết Tài liệu kỹ thuật, Hướng dẫn sử dụng/ Datasheet, Mamuals, Catalogue Bộ nguồn Phoenix Contact STEP-PS/ 1AC/24DC/4.2 - 2868664

 

Ứng dụng của Bộ nguồn Phoenix Contact STEP-PS/ 1AC/24DC/4.2 - 2868664

- Bộ nguồn STEP-PS/ 1AC/24DC/0.5 - 2868596 phù hợp lắp trong các tủ điện phân phối trong tòa nhà building;
- Sản phẩm STEP-PS/ 1AC/24DC/0.5 - 2868596 này được đặc biệt phát triển cho các ứng dụng tự động hóa tòa nhà, nhà thông minh smart-home, IoT, smart things, smart devices. Các tổn thất không tải thấp và mức độ hiệu quả cao đảm bảo hiệu quả năng lượng tối đa. Chúng cho phép sử dụng linh hoạt và có thể được gắn vào thanh DIN Rail hoặc bắt vít trên bề mặt phẳng.
 

Ưu điểm của Bộ nguồn Phoenix Contact STEP-PS/ 1AC/24DC/4.2 - 2868664

- Flexible mounting by simply snapping onto the DIN rail or screwing onto a level surface
- Reliable power supply thanks to high MTBF (mean time between failures) of more than 500,000 hours and U/I characteristic curve
- Energy savings thanks to maximum energy efficiency and incredibly low idling losses
 

Bản vẽ kỹ thuật của Bộ nguồn Phoenix Contact STEP-PS/ 1AC/24DC/4.2 - 2868664

Block diagram của Bộ nguồn Phoenix Contact STEP-PS/ 1AC/24DC/4.2 - 2868664


Dimensional drawing của Bộ nguồn Phoenix Contact STEP-PS/ 1AC/24DC/4.2 - 2868664


Schematic diagram của Bộ nguồn Phoenix Contact STEP-PS/ 1AC/24DC/4.2 - 2868664


Schematic diagram của Bộ nguồn Phoenix Contact STEP-PS/ 1AC/24DC/4.2 - 2868664


Schematic diagram của Bộ nguồn Phoenix Contact STEP-PS/ 1AC/24DC/4.2 - 2868664


Schematic diagram của Bộ nguồn Phoenix Contact STEP-PS/ 1AC/24DC/4.2 - 2868664

 

Dimensions của Bộ nguồn Phoenix Contact STEP-PS/ 1AC/24DC/4.2 - 2868664

Width	90 mm
Height	90 mm
Depth	61 mm
Installation distance right/left	0 mm / 0 mm
Installation distance top/bottom	30 mm / 30 mm

 

Ambient conditions của Bộ nguồn Phoenix Contact STEP-PS/ 1AC/24DC/4.2 - 2868664

Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 70 °C (> 55° C derating : 2.5%/K)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Max. permissible relative humidity (operation)	≤ 95 % (at 25 °C, non-condensing)
Climatic class	3K3 (in acc. with EN 60721)
Degree of pollution	2

 

Input data của Bộ nguồn Phoenix Contact STEP-PS/ 1AC/24DC/4.2 - 2868664

Nominal input voltage range	100 V AC ... 240 V AC
Input voltage range	85 V AC ... 264 V AC
	95 V DC ... 250 V DC
AC frequency range	45 Hz ... 65 Hz
Frequency range DC	0 Hz
Current consumption	1.3 A (120 V AC)
	0.8 A (230 V AC)
Nominal power consumption	196.7 VA
Inrush current	< 15 A (typical)
Mains buffering time	typ. 20 ms (120 V AC)
	typ. 100 ms (230 V AC)
Input fuse	4 A (slow-blow, internal)
Recommended breaker for input protection	6 A ... 16 A (Characteristics B, C, D, K)
Power factor (cos phi)	0.58
Type of protection	Transient surge protection
Protective circuit/component	Varistor

 

Output data của Bộ nguồn Phoenix Contact STEP-PS/ 1AC/24DC/4.2 - 2868664

Nominal output voltage	24 V DC ±1 %
Setting range of the output voltage (USet)	22.5 V DC ... 29.5 V DC (> 24 V DC, constant capacity restricted)
Nominal output current (IN)	4.2 A (-25 °C ... 55 °C)
	4.4 A (-25°C ... 40°C permanent )
Output current Imax	6.5 A
Derating	55 °C ... 70 °C (2.5%/K)
Connection in parallel	Yes, for redundancy and increased capacity
Connection in series	yes
Feedback voltage resistance	≤ 35 V DC
Protection against overvoltage at the output (OVP)	< 35 V DC
Control deviation	< 1 % (change in load, static 10 % ... 90 %)
	< 2 % (change in load, dynamic 10 % ... 90 %)
	< 0.1 % (change in input voltage ±10 %)
Residual ripple	< 40 mVPP (20 MHz)
Output power	100.8 W
Typical response time	< 0.5 s
Peak switching voltages nominal load	< 30 mVPP (20 MHz)
Maximum power dissipation in no-load condition	< 0.7 W
Power loss nominal load max.	13.2 W

 

General của Bộ nguồn Phoenix Contact STEP-PS/ 1AC/24DC/4.2 - 2868664

Net weight	0.33 kg
Efficiency	> 88 % (for 230 V AC and nominal values)
MTBF (IEC 61709, SN 29500)
	> 897000 h (40 °C)
Insulation voltage input/output	4 kV AC (type test)
	3.75 kV AC (routine test)
Degree of protection	IP20
Protection class	II (in closed control cabinet)
Housing material	Polycarbonate
Foot latch material	POM (Polyoxymethylen)
Mounting position	horizontal DIN rail NS 35, EN 60715
Assembly instructions	alignable: 0 mm horizontally, 30 mm vertically

 

Connection data, input của Bộ nguồn Phoenix Contact STEP-PS/ 1AC/24DC/4.2 - 2868664

Connection method	Screw connection
Conductor cross section solid min.	0.2 mm²
Conductor cross section solid max.	2.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	2.5 mm²
Conductor cross section AWG min.	24
Conductor cross section AWG max.	12
Stripping length	6.5 mm
Screw thread	M3

 

Connection data, output của Bộ nguồn Phoenix Contact STEP-PS/ 1AC/24DC/4.2 - 2868664

Connection method	Screw connection
Conductor cross section solid min.	0.2 mm²
Conductor cross section solid max.	2.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	2.5 mm²
Conductor cross section AWG min.	24
Conductor cross section AWG max.	12
Stripping length	6.5 mm
Screw thread	M3

 

Standards của Bộ nguồn Phoenix Contact STEP-PS/ 1AC/24DC/4.2 - 2868664

EMC requirements for noise immunity	EN 61000-6-1
	EN 61000-6-2
EMC requirements for noise emission	EN 61000-6-3
	EN 61000-6-4
Standard - Safety of transformers	EN 61558-2-16
Standard - Electrical safety	IEC 60950-1/VDE 0805 (SELV)
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations	EN 50178/VDE 0160 (PELV)
Standard – Safety extra-low voltage	IEC 60950-1 (SELV) and EN 60204-1 (PELV)
Standard - Safe isolation	DIN VDE 0100-410
Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment	EN 50178
Standard – Limitation of mains harmonic currents	EN 61000-3-2
Rail applications	EN 50121-4

 

Conformance/approvals của Bộ nguồn Phoenix Contact STEP-PS/ 1AC/24DC/4.2 - 2868664

UL approvals	UL/C-UL listed UL 508
	UL/C-UL Recognized UL 60950-1
	UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D T4A (Hazardous Location)
CSA	CSA-C22.2 No. 107.1-01
Shipbuilding approval	DNV GL (EMC B) ABS, NK

 

EMC data của Bộ nguồn Phoenix Contact STEP-PS/ 1AC/24DC/4.2 - 2868664

Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Low Voltage Directive	Conformance with Low Voltage Directive 2014/35/EC
Electrostatic discharge	EN 61000-4-2
Electromagnetic HF field	EN 61000-4-3
Fast transients (burst)	EN 61000-4-4
Surge voltage load (surge)	EN 61000-4-5
Input	2 kV (Test Level 3 - symmetrical)
	4 kV (Test Level 4 - asymmetrical)
Output	1 kV (Test Level 2 - symmetrical)
	1 kV (Test Level 2 - asymmetrical)
Comments	Criterion A
Conducted interference	EN 61000-4-6
Voltage dips	EN 61000-4-11

 

Environmental Product Compliance của Bộ nguồn Phoenix Contact STEP-PS/ 1AC/24DC/4.2 - 2868664

REACh SVHC	Lead 7439-92-1
China RoHS	Environmentally Friendly Use Period = 25;
	For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”

 

Classifications của Bộ nguồn Phoenix Contact STEP-PS/ 1AC/24DC/4.2 - 2868664

eCl@ss của Bộ nguồn Phoenix Contact STEP-PS/ 1AC/24DC/4.2 - 2868664

eCl@ss 10.0.1	27040701
eCl@ss 4.0	27040700
eCl@ss 4.1	27040700
eCl@ss 5.0	27242200
eCl@ss 5.1	27242200
eCl@ss 6.0	27049000
eCl@ss 7.0	27049002
eCl@ss 8.0	27049002
eCl@ss 9.0	27040701

 

ETIM của Bộ nguồn Phoenix Contact STEP-PS/ 1AC/24DC/4.2 - 2868664

ETIM 2.0	EC001039
ETIM 3.0	EC001039
ETIM 4.0	EC002540
ETIM 5.0	EC002540
ETIM 6.0	EC002540
ETIM 7.0	EC002540

 

UNSPSC

UNSPSC 6.01	30211502
UNSPSC 7.0901	39121004
UNSPSC 11	39121004
UNSPSC 12.01	39121004
UNSPSC 13.2	39121004
UNSPSC 18.0	39121004
UNSPSC 19.0	39121004
UNSPSC 20.0	39121004
UNSPSC 21.0	39121004