Rờ le 14 chân 4CO LED 230VAC 6A Phoenix Contact REL-IR-BL/L-230AC/4X21 - 1032531
Plug-in industrial relay with power contacts, 4 changeover contacts, test button, status LED, mechanical switch position indicator, input voltage: 230 V AC
Technical data
Notes
General |
Do not connect adjacent channels to SELV/ PELV and voltages dangerous to the touch. |
General |
The outputs are not suitable for switching different outer conductors. |
General |
Do not use to separate SELV / PELV circuits from other circuits, because safe isolation is not guaranteed. |
Product properties
Product type |
Single relay |
Operating mode |
100% operating factor |
Mechanical service life |
2x 107 cycles |
Insulation characteristics |
Insulation |
Basic insulation |
Insulation characteristics: Air clearances and creepage distances between coil and contact side |
Insulation |
Basic insulation |
Overvoltage category |
III |
Pollution degree |
2 |
Electrical properties
Service life electrical |
see diagram |
Maximum power dissipation for nominal condition |
1 VA |
Test voltage (Winding/contact) |
2.5 kVrms (50 Hz, 1 min., winding/contact) |
Test voltage (Changeover contact/changeover contact) |
2 kVrms (50 Hz, 1 min., changeover contact/changeover contact) |
Air clearances and creepage distances between coil and contact side |
Rated insulation voltage |
250 V AC |
Rated surge voltage |
5 kV |
Input data
Coil side |
Nominal input voltage UN |
230 V AC |
Input voltage range |
184 V AC ... 379.5 V AC (20 °C) |
Mains frequency |
50/60 Hz |
Drive and function |
monostable |
Drive (polarity) |
non-polarized |
Typical input current at UN |
4.4 mA (50 Hz) |
Typical response time |
5 ms ... 15 ms |
Typical release time range |
5 ms ... 20 ms |
Coil voltage |
230 V AC |
Status display |
Yellow LED |
Output data
Switching |
Contact switching type |
4 changeover contacts |
Type of switch contact |
Single contact |
Contact material |
AgNi |
Maximum switching voltage |
250 V AC/DC |
Minimum switching voltage |
12 V (10 mA) |
Limiting continuous current |
6 A |
Maximum inrush current |
12 A (20 ms, N/O contacts) |
Min. switching current |
10 mA (12 V) |
Interrupting rating (ohmic load) max. |
144 W (24 V DC) |
130 W (48 V DC) |
90 W (60 V DC) |
66 W (110 V DC) |
88 W (220 V DC) |
1500 VA (250 V AC) |
Switching capacity min. |
120 mW |
Connection data
Connection method |
Plug-in connection |
Dimensions
Width |
22.5 mm |
Height |
28 mm |
Depth |
35.5 mm |
Environmental and real-life conditions
Ambient conditions |
Degree of protection |
RT II |
Degree of protection (Installation location) |
≥ IP54 (Installation location) |
Ambient temperature (operation) |
-40 °C ... 70 °C |
Ambient temperature (storage/transport) |
-40 °C ... 70 °C |
Altitude |
≤ 2000 m |
Standards and regulations
Air clearances and creepage distances between coil and contact side |
Standards/regulations |
EN 61810-1 |
Mounting
Mounting type |
Plug-in mounting |
Assembly instructions |
in rows with zero spacing |
Mounting position |
any |
Commercial data
Item number |
1032531 |
Packing unit |
10 pc |
Minimum order quantity |
10 pc |
Sales key |
CK6 |
Product key |
CKF947 |
GTIN |
4055626537047 |
Weight per piece (including packing) |
30.197 g |
Weight per piece (excluding packing) |
29.02 g |
Customs tariff number |
85364900 |
Country of origin |
AT |
Classifications
ECLASS
ECLASS-11.0 |
27371601 |
ECLASS-12.0 |
27371601 |
ECLASS-13.0 |
27371601 |
ETIM
UNSPSC
Approvals
cUL Recognized
Approval ID: FILE E 228652
UL Recognized
Approval ID: FILE E 228652
EAC
Approval ID: TR_TS_D_00573_c
EAC
Approval ID: RU*C-DE.*08.B.00010
cULus Recognized
Environmental product compliance
|
China RoHS |
Environmentally friendly use period: unlimited = EFUP-e |
No hazardous substances above threshold values |
- Tài liệu kỹ thuật Phoenix Contact REL-IR-BL/L-230AC/4X21 - 1032531
ở đây.