Notes on operation | Do not connect adjacent channels to SELV/ PELV and voltages dangerous to the touch. |
Notes on operation | The outputs are not suitable for switching different outer conductors. |
Notes on operation | Do not use to separate SELV / PELV circuits from other circuits, because safe isolation is not guaranteed. |
Product type | Single relay |
Operating mode | 100% operating factor |
Mechanical service life | 3x 107 cycles |
Insulation characteristics | |
Insulation | Basic insulation |
Insulation characteristics: Air clearances and creepage distances between coil and contact side | |
Insulation | Basic insulation |
Overvoltage category | III |
Pollution degree | 2 |
Service life electrical | see diagram |
Maximum power dissipation for nominal condition | 0.96 W |
Test voltage (Winding/contact) | 2.5 kVrms (50 Hz, 1 min., winding/contact) |
Test voltage (Changeover contact/changeover contact) | 2 kVrms (50 Hz, 1 min., changeover contact/changeover contact) |
Air clearances and creepage distances between coil and contact side | |
Rated insulation voltage | 250 V AC |
Rated surge voltage | 5 kV |
Coil side | |
Nominal input voltage UN | 220 V DC |
Input voltage range | 176 V DC ... 429 V DC (20 °C) |
Drive and function | monostable |
Drive (polarity) | polarized |
Typical input current at UN | 3.4 mA |
Typical response time | 15 ms |
Typical release time | 10 ms |
Coil voltage | 220 V DC |
Status display | Yellow LED |
Coil resistance | 64.5 kΩ ±15 % |
Switching | |
Contact switching type | 4 changeover contacts |
Type of switch contact | Single contact |
Contact material | AgNi |
Maximum switching voltage | 250 V AC/DC |
Minimum switching voltage | 12 V (10 mA) |
Limiting continuous current | 6 A |
Maximum inrush current | 12 A (20 ms, N/O contacts) |
Min. switching current | 10 mA (12 V) |
Interrupting rating (ohmic load) max. | 144 W (24 V DC) |
130 W (48 V DC) | |
90 W (60 V DC) | |
66 W (110 V DC) | |
88 W (220 V DC) | |
1500 VA (250 V AC) | |
Switching capacity min. | 120 mW |
Connection method | Plug-in connection |
Width | 22.5 mm |
Height | 28 mm |
Depth | 35.5 mm |
Ambient conditions | |
Degree of protection | RT II |
Degree of protection (Installation location) | ≥ IP54 (Installation location) |
Ambient temperature (operation) | -40 °C ... 70 °C |
Ambient temperature (storage/transport) | -40 °C ... 70 °C |
Altitude | ≤ 2000 m |
Air clearances and creepage distances between coil and contact side | |
Standards/regulations | EN 61810-1 |
Mounting type | Plug-in mounting |
Assembly note | in rows with zero spacing |
Mounting position | any |
Item number | 1109562 |
Packing unit | 10 pc |
Minimum order quantity | 10 pc |
Sales key | CK6 |
Product key | CKF947 |
GTIN | 4063151021832 |
Weight per piece (including packing) | 30.1 g |
Weight per piece (excluding packing) | 29.9 g |
Customs tariff number | 85364900 |
Country of origin | AT |
ECLASS-11.0 | 27371601 |
ECLASS-12.0 | 27371601 |
ECLASS-13.0 | 27371601 |
ETIM 8.0 | EC001437 |
UNSPSC 21.0 | 39122300 |
EU RoHS | |
Fulfills EU RoHS substance requirements | Yes (No exemptions) |
China RoHS | |
Environment friendly use period (EFUP) | EFUP-E No hazardous substances above the limits |
EU REACH SVHC | |
REACH candidate substance (CAS No.) | No substance above 0.1 wt% |