Rơ le kiếng 14-chân 4PDT 24VDC ECOR SET Phoenix Contact 1083277

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm PHOENIX CONTACT

• 

  Phân biệt kiểu chuyển mạch NO và NC - Switching function Normally open NO vs Normally closed NC

• 

  Các model Rờ le giám sát tải DC Siemens SIRIUS 3UG5 monitoring relays for PROFINET

• Xem thêm

Rơ le kiếng 14-chân 4PDT 24VDC ECOR SET Phoenix Contact 1083277

Bao gồm:
Single relay

REL-IR-BL/L- 24DC/4X21 - 1032527

Plug-in industrial relay with power contacts, 4 changeover contacts, test button, status LED, mechanical switch position indicator, input voltage: 24 V DC
 

 

Thông số kỹ thuật

Notes

General	Do not connect adjacent channels to SELV/ PELV and voltages dangerous to the touch.
General	The outputs are not suitable for switching different outer conductors.
General	Do not use to separate SELV / PELV circuits from other circuits, because safe isolation is not guaranteed.

 

Product properties

Product type	Single relay
Operating mode	100% operating factor
Mechanical service life	3x 107 cycles
Insulation characteristics
Insulation	Basic insulation
Insulation characteristics: Air clearances and creepage distances between coil and contact side
Insulation	Basic insulation
Overvoltage category	III
Pollution degree	2

 

Electrical properties

Service life electrical	see diagram
Maximum power dissipation for nominal condition	759 mW
Test voltage (Winding/contact)	2.5 kVrms (50 Hz, 1 min., winding/contact)
Test voltage (Changeover contact/changeover contact)	2 kVrms (50 Hz, 1 min., changeover contact/changeover contact)
Air clearances and creepage distances between coil and contact side
Rated insulation voltage	250 V AC
Rated surge voltage	5 kV

 

Input data

Coil side
Nominal input voltage UN	24 V DC
Input voltage range	19.2 V DC ... 46.8 V DC (20 °C)
Drive and function	monostable
Drive (polarity)	polarized
Typical input current at UN	32 mA
Typical response time	15 ms
Typical release time	10 ms
Coil voltage	24 V DC
Status display	Yellow LED (bidirectional)

 

Output data

Switching
Contact switching type	4 changeover contacts
Type of switch contact	Single contact
Contact material	AgNi
Maximum switching voltage	250 V AC/DC
Minimum switching voltage	12 V (10 mA)
Limiting continuous current	6 A
Maximum inrush current	12 A (20 ms, N/O contacts)
Min. switching current	10 mA (12 V)
Interrupting rating (ohmic load) max.	144 W (24 V DC)
	130 W (48 V DC)
	90 W (60 V DC)
	66 W (110 V DC)
	88 W (220 V DC)
	1500 VA (250 V AC)
Switching capacity min.	120 mW

 

Connection data

Cross section AWG	(converted acc. to IEC)
Connection method	Plug-in connection

 

Dimensions

Width	22.5 mm
Height	28 mm
Depth	35.5 mm

 

Environmental and real-life conditions

Ambient conditions
Degree of protection	RT II
Degree of protection (Installation location)	≥ IP54 (Installation location)
Ambient temperature (operation)	-40 °C ... 70 °C
Ambient temperature (storage/transport)	-40 °C ... 70 °C
Altitude	≤ 2000 m

 

Standards and regulations

Air clearances and creepage distances between coil and contact side
Standards/regulations	EN 61810-1

 

Mounting

Mounting type	Plug-in mounting
Assembly instructions	in rows with zero spacing
Mounting position	any

 

Commercial data

Item number	1032527
Packing unit	10 pc
Minimum order quantity	10 pc
Sales key	CK6193
Product key	CKF947
GTIN	4055626537115
Weight per piece (including packing)	31.59 g
Weight per piece (excluding packing)	30 g
Customs tariff number	85364190
Country of origin	AT

 

Classifications

ECLASS

ECLASS-11.0	27371601
ECLASS-12.0	27371601
ECLASS-13.0	27371601

 

ETIM

ETIM 8.0

EC001437

 

UNSPSC

UNSPSC 21.0

39122300

 

Approvals
cUL Recognized

Approval ID: FILE E 228652
 

UL Recognized

Approval ID: FILE E 228652
 

EAC

Approval ID: TR_TS_D_00573_c
 

cULus Recognized

 

Environmental product compliance

China RoHS	Environmentally friendly use period: unlimited = EFUP-e
	No hazardous substances above threshold values

và:
Relay base

ECOR-2-BSC2-RT/4X21 - 2908214

ECOR-2 relay base, for industrial relays with four changeover contacts, bolt connection, for mounting on NS 35/7,5
 

Thông số kỹ thuật

Product properties

Product type	Relay socket
Product family	ESSENTIAL edition

 

Electrical properties

Nominal voltage UN	250 V AC/DC
Nominal current IN	5 A

 

Connection data

Input side
Connection method	Bolt connection
Stripping length	8 mm
Screw thread	M3
Conductor cross section rigid	2x 0.2 mm² ... 2.5 mm² (without ferrule)
	2x 0.2 mm² ... 1.5 mm² (with ferrule)
Conductor cross section flexible	2x 0.2 mm² ... 2.5 mm² (without ferrule)
	2x 0.2 mm² ... 1.5 mm² (with ferrule)
Output side
Connection method	Bolt connection
Stripping length	8 mm
Screw thread	M3
Conductor cross section rigid	2x 0.2 mm² ... 2.5 mm² (without ferrule)
	2x 0.2 mm² ... 1.5 mm² (with ferrule)
Conductor cross section flexible	2x 0.2 mm² ... 2.5 mm² (without ferrule)
	2x 0.2 mm² ... 1.5 mm² (with ferrule)

 

Dimensions

Width	29.8 mm
Height	64.9 mm
Depth Retaining bracket	63 mm (ECOR-RHM-2)

 

Environmental and real-life conditions

Ambient conditions
Ambient temperature (operation)	-25 °C ... 55 °C
Ambient temperature (storage/transport)	-25 °C ... 55 °C

 

Mounting

Mounting type	DIN rail mounting
Mounting position	any

 

Commercial data

Item number	2908214
Packing unit	10 pc
Minimum order quantity	10 pc
Sales key	CK6313
Product key	CKF313
GTIN	4055626289144
Weight per piece (including packing)	55.07 g
Weight per piece (excluding packing)	50.5 g
Customs tariff number	85366990
Country of origin	CN

 

Classifications

ECLASS

ECLASS-11.0	27371603
ECLASS-12.0	27371603
ECLASS-13.0	27371603

 

ETIM

ETIM 9.0

EC001456

 

UNSPSC

UNSPSC 21.0

39122300

 

Approvals

CSA

Approval ID: 255476
 

cUL Recognized

Approval ID: FILE E 113228
 

UL Recognized

Approval ID: FILE E 113228
 

EAC

Approval ID: RU C-DE.**08.B.01419
 

cULus Recognized

 

Environmental product compliance

China RoHS	Environmentally friendly use period: unlimited = EFUP-e
	No hazardous substances above threshold values