Phoenix Contact PLC-RSC- 24DC/21-21 - 2967060 là Rờ le dạng tép mỏng 2-PDT 250V AC/DC 6A coil 24VDC
Giao diện PLC, bao gồm khối đé PLC-BSC ... / 21, nối vít và rơ le nhỏ cắm vào có tiếp điểm nguồn, để lắp ráp trên DIN rail NS 35 / 7,5, 2 tiếp điểm chuyển đổi (charge-over contact, SPDT, 1-SDT,
Single
Pole
Double
Throw), điện áp cuộn coil điều khiển 24V DC
- Tài liệu kỹ thuật (Datasheet) Phoenix Contact PLC-RSC- 24DC/21-21 - 2967060 ở đây.
1 Bộ Rờ le Phoenix Contact PLC-RSC- 24DC/21-21 - 2967060 gồm 2 thành phần:
- Relay base
PLC-BSC- 24DC/21-21 - 2967015
- Single relay
REL-MR- 24DC/21-21 - 2961192
Thông số kỹ thuật của Rờ le Phoenix Contact PLC-RSC- 24DC/21-21 - 2967060
Chú ý về Rờ le Phoenix Contact PLC-RSC- 24DC/21-21 - 2967060
| Sử dụng hạn chế/ Utilization restriction |
| Chú ý về EMC |
EMC: Sản phẩm loại A, xem tuyên bố của nhà sản xuất trong khu vực tải xuống/ Class A product, see manufacturer's declaration in the download area |
Đặc tính sản phẩm của Rờ le Phoenix Contact PLC-RSC- 24DC/21-21 - 2967060
| Product type |
Relay Module |
| Application |
Universal |
| Operating mode |
100% operating factor |
| Mechanical service life |
3x 107 cycles |
| Insulation characteristics |
| Overvoltage category |
III |
| Pollution degree |
3 |
| Insulation |
Safe isolation: Control side / contact side |
Thuộc tính về điện của Rờ le Phoenix Contact PLC-RSC- 24DC/21-21 - 2967060
| Maximum power dissipation for nominal condition |
0.43 W |
| Test voltage Winding/contact |
4 kV AC (50 Hz, 1 min., winding/contact) |
| Test voltage Changeover contact/changeover contact |
2.5 kV AC (50 Hz, 1 min., changeover contact/changeover contact) |
| Rated surge voltage |
6 kV |
Thông số đầu vào của Rờ le Phoenix Contact PLC-RSC- 24DC/21-21 - 2967060
| Coil side |
| Nominal input voltage UN |
24 V DC |
| Input voltage range |
20.2 V DC ... 33.6 V DC (20 °C) |
| Typical input current at UN |
18 mA |
| Typical response time |
8 ms |
| Typical release time |
10 ms |
| Protective circuit |
Reverse polarity protection; Polarity protection diode |
| Freewheeling diode; Freewheeling diode |
| Operating voltage display |
Yellow LED |
Thông số đầu ra của Rờ le Phoenix Contact PLC-RSC- 24DC/21-21 - 2967060
| Switching |
| Contact type |
2 changeover contacts |
| Type of switch contact |
Single contact |
| Drive and function |
monostable |
| Drive (polarity) |
bipolar |
| Contact material |
AgNi |
| Maximum switching voltage |
250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...) |
| Minimum switching voltage |
5 V AC/DC (10 mA) |
| Limiting continuous current |
6 A |
| Maximum inrush current |
15 A (300 ms) |
| Min. switching current |
10 mA (5 V) |
| Interrupting rating (ohmic load) max. |
140 W (at 24 V DC) |
| 85 W (at 48 V DC) |
| 60 W (at 60 V DC) |
| 44 W (at 110 V DC) |
| 60 W (at 220 V DC) |
| 1500 VA (for 250 V AC) |
| Switching capacity |
2 A (at 24 V, DC13) |
| 3 A (at 24 V, AC15) |
| 3 A (at 120 V, AC15) |
| 0.2 A (at 250 V, DC13) |
| 3 A (at 250 V, AC15) |
Thông số kết nối của Rờ le Phoenix Contact PLC-RSC- 24DC/21-21 - 2967060
| Connection method |
Screw connection |
| Stripping length |
8 mm |
| Screw thread |
M3 |
| Conductor cross section solid |
0.14 mm² ... 2.5 mm² |
| Conductor cross section flexible |
0.14 mm² ... 2.5 mm² |
| 0.2 mm² ... 2.5 mm² (Single ferrule) |
| 2x 0.5 mm² ... 1.5 mm² (TWIN ferrule) |
| Conductor cross section AWG |
26 ... 14 |
| Tightening torque |
0.6 Nm ... 0.8 Nm |
Kích thước của Rờ le Phoenix Contact PLC-RSC- 24DC/21-21 - 2967060
| Width |
14 mm |
| Height |
80 mm |
| Depth |
94 mm |
Thông số vật liệu của Rờ le Phoenix Contact PLC-RSC- 24DC/21-21 - 2967060
| Flammability rating according to UL 94 |
V0 (Housing) |
Môi trường vận hành và Mức bảo vệ của Rờ le Phoenix Contact PLC-RSC- 24DC/21-21 - 2967060
| Ambient conditions |
| Degree of protection |
RT III (Relay) |
| IP20 (Relay base) |
| Ambient temperature (operation) |
-40 °C ... 60 °C |
| Ambient temperature (storage/transport) |
-40 °C ... 85 °C |
Approval data của Rờ le Phoenix Contact PLC-RSC- 24DC/21-21 - 2967060
| Corrosive gas test |
| Identification |
ISA-S71.04. G3 Harsh Group |
| EN 60068-2-60 |
Quy-Chuẩn của Rờ le Phoenix Contact PLC-RSC- 24DC/21-21 - 2967060
| Standards/regulations |
IEC 60947-5-1 |
Thông số lắp đặt của Rờ le Phoenix Contact PLC-RSC- 24DC/21-21 - 2967060
| Mounting type |
DIN rail mounting |
| Assembly instructions |
in rows with zero spacing |
| Mounting position |
any |
Thông số về thương mại của Rờ le Phoenix Contact PLC-RSC- 24DC/21-21 - 2967060
| Item number |
2967060 |
| Packing unit |
10 pc |
| Minimum order quantity |
1 pc |
| Sales Key |
08 |
| Product Key |
CK621C |
| Catalog Page |
Page 366 (C-5-2019) |
| GTIN |
4017918156374 |
| Weight per Piece (including packing) |
76.27 g |
| Weight per Piece (excluding packing) |
72.4 g |
| Customs tariff number |
85364190 |
| Country of origin |
DE |
Tham khảo thêm các model khác cùng loại:
PLC-RSC- 24DC/21 - 2966171
PLC-INTERFACE, consisting of basic terminal block PLC-BSC.../21 with screw connection and plug-in miniature relay with power contact, for assembly on DIN rail NS 35/7,5, 1 changeover contact, input voltage 24 V DC
PLC-RPT-230UC/21-21/SO46 - 1136245
PLC-INTERFACE for protection against interference currents or interference voltages on the control side. Consisting of basic terminal block with Push-in connection and plug-in miniature relay with power contact, 2 changeover contacts, 230 V AC input voltage
PLC-RSC- 24DC/21-21 - 2967060
PLC-INTERFACE, consisting of basic terminal block PLC-BSC.../21 with screw connection and plug-in miniature relay with power contact, for assembly on DIN rail NS 35/7,5, 2 changeover contacts, input voltage 24 V DC
PLC-RPT- 24DC/21 - 2900299
PLC-INTERFACE, consisting of PLC-BPT.../21 basic terminal block with Push-in connection and plug-in miniature relay with power contact, for mounting on NS 35/7,5 DIN rail, 1 changeover contact, input voltage 24 V DC
PLC-RSC-230UC/21 - 2966207
PLC-INTERFACE, consisting of basic terminal block PLC-BSC.../21 with screw connection and plug-in miniature relay with power contact, for assembly on DIN rail NS 35/7,5, 1 changeover contact, input voltage 230 V AC/220 V DC
PLC-RSC-120UC/21-21 - 2967086
PLC-INTERFACE, consisting of basic terminal block PLC-BSC.../21 with screw connection and plug-in miniature relay with power contact, for assembly on DIN rail NS 35/7,5, 2 changeover contacts, input voltage 120 V AC/110 V DC
PLC-RSC- 24UC/21 - 2966184
PLC-INTERFACE, consisting of basic terminal block PLC-BSC.../21 with screw connection and plug-in miniature relay with power contact, for assembly on DIN rail NS 35/7,5, 1 changeover contact, input voltage 24 V AC/DC
PLC-RSC-230UC/21-21 - 2967099
PLC-INTERFACE, consisting of basic terminal block PLC-BSC.../21 with screw connection and plug-in miniature relay with power contact, for assembly on DIN rail NS 35/7,5, 2 changeover contacts, input voltage 230 V AC/220 V DC
PLC-RPT-120UC/21-21/SO46 - 1136244
PLC-INTERFACE for protection against interference currents or interference voltages on the control side. Consisting of basic terminal block with Push-in connection and plug-in miniature relay with power contact up to 2x 8 A, 2 changeover contacts, 120 V AC input voltage
PLC-RPT-230UC/21HC/SO46 - 1136242
PLC-INTERFACE for protection against interference currents or interference voltages on the control side. Consisting of basic terminal block with Push-in connection and plug-in miniature relay with power contact up to 10 A, 1 changeover contact, 230 V AC input voltage
PLC-RSC-120UC/21 - 2966197
PLC-INTERFACE, consisting of basic terminal block PLC-BSC.../21 with screw connection and plug-in miniature relay with power contact, for assembly on DIN rail NS 35/7,5, 1 changeover contact, input voltage 120 V AC/110 V DC
PLC-RPT- 24DC/21-21 - 2900330
PLC-INTERFACE, consisting of PLC-BPT.../21-21 basic terminal block with Push-in connection and plug-in miniature relay with power contact, for mounting on DIN rail NS 35/7,5, 2 changeover contacts, input voltage 24 V DC
PLC-RSC- 24UC/21-21 - 2967073
PLC-INTERFACE, consisting of basic terminal block PLC-BSC.../21 with screw connection and plug-in miniature relay with power contact, for assembly on DIN rail NS 35/7,5, 2 changeover contacts, input voltage 24 V AC/DC
PLC-RPT- 24UC/21 - 2900300
PLC-INTERFACE, consisting of PLC-BPT.../21 basic terminal block with Push-in connection and plug-in miniature relay with power contact, for mounting on NS 35/7,5 DIN rail, 1 changeover contact, input voltage 24 V AC/DC
PLC-RSC- 24DC/ 1/ACT - 2966210
PLC-INTERFACE for output functions, consisting of PLC-BSC.../ACT basic terminal block with screw connection and plug-in miniature relay with power contact, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input voltage 24 V DC
PLC-RPT-230UC/21 - 2900305
PLC-INTERFACE, consisting of PLC-BPT.../21 basic terminal block with Push-in connection and plug-in miniature relay with power contact, for mounting on DIN rail NS 35/7,5, 1 changeover contact, input voltage 230 V AC/220 V DC
PLC-RSC-125DC/21 - 2980021
PLC-INTERFACE, consisting of basic terminal block PLC-BSC.../21 with screw connection and plug-in miniature relay with power contact, for assembly on DIN rail NS 35/7,5, 1 changeover contact, input voltage 125 V DC
PLC-RSC- 12DC/21 - 2966906
PLC-INTERFACE, consisting of basic terminal block PLC-BSC.../21 with screw connection and plug-in miniature relay with power contact, for assembly on DIN rail NS 35/7,5, 1 changeover contact, input voltage 12 V DC
PLC-RSC- 48DC/21 - 2966113
PLC-INTERFACE, consisting of basic terminal block PLC-BSC.../21 with screw connection and plug-in miniature relay with power contact, for assembly on DIN rail NS 35/7,5, 1 changeover contact, input voltage 48 V DC
PLC-RPT- 24DC/21HC - 2900291
PLC-INTERFACE for high continuous currents, consisting of PLC-BPT.../21 HC basic terminal block with Push-in connection and plug-in miniature relay, for mounting on DIN rail NS 35/7,5, limiting continuous current up to 10 A, 1 changeover contact, input voltage 24 V DC
PLC-RPT-120UC/21 - 2900304
PLC-INTERFACE, consisting of PLC-BPT.../21 basic terminal block with Push-in connection and plug-in miniature relay with power contact, for mounting on DIN rail NS 35/7,5, 1 changeover contact, input voltage 120 V AC/110 V DC
PLC-RPT- 24DC/21/MS - 2909667
PLC-INTERFACE, consisting of PLC-BPT.../21 basic terminal block with Push-in connection and plug-in miniature relay with power contact and manual operation, 1 changeover contact, 24 V DC input voltage
PLC-RPT- 24DC/ 1/ACT - 2900312
PLC-INTERFACE for output functions, consisting of PLC-BPT.../ACT basic terminal block with push-in connection and plug-in miniature relay with power contact, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input voltage 24 V DC
PLC-RSC- 24DC/21HC - 2967620
PLC-INTERFACE for high continuous currents, consisting of PLC-BSC.../21 HC basic terminal block with screw connection and plug-in miniature relay, for mounting on NS 35/7,5 DIN rail, limiting continuous current up to 10 A, 1 changeover contact, input voltage 24 V DC
PLC-RSC- 24DC/ 1IC/ACT - 2967604
PLC-INTERFACE for high switch-on currents, consisting of PLC-BSC.../1 IC/ACT basic terminal block with screw connection and plug-in miniature relay, for mounting on DIN rail NS 35/7,5, max. switch-on current up to 130 A, 1 N/O contact, input voltage 24 V DC
PLC-RSC- 24DC/ 1/SEN - 2966223
PLC-INTERFACE for input functions, consisting of PLC-BSC.../SEN basic terminal block with screw connection and plug-in miniature relay with power contact, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input voltage 24 V DC
PLC-RPT- 24DC/2X21/FG - 2910537
PLC-INTERFACE, consisting of a relay base and plug-in safety relay with force-guided contacts in accordance with DIN EN 61810-3, Push-in connection, 2 changeover contacts, forcibly actuated, Freewheeling diode, Input voltage: 24 V DC
PLC-RSC- 24DC/21-21/MS - 2910502
PLC-INTERFACE, consisting of a relay base and pluggable power contact relay with manual operation, integrated status LED and freewheeling diode, Screw connection, 2 changeover contacts, Freewheeling diode, Input voltage: 24 V DC
PLC-RPT-230UC/21/MS - 2909670
PLC-INTERFACE, consisting of PLC-BPT.../21 basic terminal block with Push-in connection and plug-in miniature relay with power contact and manual operation, 1 changeover contact, 230 V AC/220 V DC input voltage
PLC-RSC-24DC/21/EX - 2909524
PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 6.2 mm with screw connection and plug-in miniature relay with 6 A power contact, 1 changeover contact, 24 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2.
PLC-RSC- 24UC/21HC - 2967633
PLC-INTERFACE, consisting of PLC-BSC.../21 HC basic terminal block with screw connection and plug-in miniature relay for high continuous current, for mounting on DIN rail NS 35/7,5, limiting continuous current up to 10 A, 1 changeover contact, input voltage 24 V AC/DC
PLC-RSC- 12DC/21-21 - 2967235
PLC-INTERFACE, consisting of basic terminal block PLC-BSC.../21 with screw connection and plug-in miniature relay with power contact, for assembly on DIN rail NS 35/7,5, 2 changeover contacts, input voltage 12 V DC
PLC-RSC- 24DC/2X21/FG - 2910535
PLC-INTERFACE, consisting of a relay base and plug-in safety relay with force-guided contacts in accordance with DIN EN 61810-3, Screw connection, 2 changeover contacts, forcibly actuated, Freewheeling diode, Input voltage: 24 V DC
PLC-RPT-230UC/21/SO46 - 2910110
PLC-INTERFACE with interference current and interference voltage protection on the control side, consisting of PLC-BPT.../21 basic terminal block with Push-in connection and plug-in miniature relay with power contact, 1 changeover contact, input voltage 230 V AC
PLC-RSC- 24DC/21/MS - 2909649
PLC-INTERFACE, consisting of PLC-BSC.../21 basic terminal block with screw connection and plug-in miniature relay with power contact and manual operation, 1 changeover contact, 24 V DC input voltage
PLC-RPT- 24UC/21-21/RW - 2900346
PLC-INTERFACE for railway applications, consisting of basic terminal block with Push-in connection and plug-in miniature relay with power contact, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40°C to +70°C, 2 changeover contacts, input voltage 24 V DC
PLC-RPT-230UC/21-21 - 2900336
PLC-INTERFACE, consisting of PLC-BPT.../21-21 basic terminal block with Push-in connection and plug-in miniature relay with power contact, for mounting on NS 35/7,5 DIN rail, 2 changeover contacts, input voltage 230 V AC/DC
PLC-RPT-110UC/21/RW - 2900320
PLC-INTERFACE for railway applications, consisting of basic terminal block with Push-in connection and plug-in miniature relay with power contact, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40°C to +70°C, 1 changeover contact, input voltage 110 V DC
PLC-RSC- 24DC/ 1ICT/ACT - 1078680
PLC-INTERFACE for high inrush currents, consisting of PLC-BSC.../1 IC/ACT basic terminal block with screw connection and pluggable miniature relay, for mounting on DIN rail NS 35/7.5, max. inrush current up to 800 A, 1 N/O contact, 24 V DC input voltage
PLC-RSC-120UC/21/SO46 - 5603593
PLC-INTERFACE for protection against interference currents or interference voltages on the control side. Consisting of PLC-BSC-120UC/21/SO46 basic terminal block with screw connection and plug-in miniature relay with power contact up to 6 A, 1 changeover contact, input voltage: 120 V AC
PLC-RSC- 48DC/21-21 - 2967248
PLC-INTERFACE, consisting of basic terminal block PLC-BSC.../21 with screw connection and plug-in miniature relay with power contact, for assembly on DIN rail NS 35/7,5, 2 changeover contacts, input voltage 48 V DC
PLC-RPT- 24UC/21/MS - 2909668
PLC-INTERFACE, consisting of PLC-BPT.../21 basic terminal block with Push-in connection and plug-in miniature relay with power contact and manual operation, 1 changeover contact, 24 V AC/DC input voltage
PLC-RPT- 12DC/21/MS - 2909666
PLC-INTERFACE, consisting of PLC-BPT.../21 basic terminal block with Push-in connection and plug-in miniature relay with power contact and manual operation, 1 changeover contact, 12 V DC input voltage
PLC-RSC- 24UC/21/MS - 2909650
PLC-INTERFACE, consisting of PLC-BSC.../21 basic terminal block with screw connection and plug-in miniature relay with power contact and manual operation, 1 changeover contact, 24 V AC/DC input voltage
PLC-RSC- 24DC/21-21/EX - 2909509
PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 14 mm with screw connection and plug-in relay with power contact, 2 changeover contacts, 24 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2.
PLC-RPT-120UC/21-21 - 2900335
PLC-INTERFACE, consisting of PLC-BPT.../21-21 basic terminal block with Push-in connection and plug-in miniature relay with power contact, for mounting on DIN rail NS 35/7,5, 2 changeover contacts, input voltage 120 V AC/DC
PLC-RPT- 24UC/21/RW - 2900318
PLC-INTERFACE for railway applications, consisting of basic terminal block with Push-in connection and plug-in miniature relay with power contact, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40°C to +70°C, 1 changeover contact, input voltage 24 V DC
PLC-RSC- 60DC/21-21 - 2967293
PLC-INTERFACE, consisting of basic terminal block PLC-BSC.../21 with screw connection and plug-in miniature relay with power contact, for assembly on DIN rail NS 35/7,5, 2 changeover contacts, input voltage 60 V DC
PLC-RPT- 24DC/21HC/MS - 2910530
PLC-INTERFACE, consisting of a relay base and pluggable power contact relay with manual operation, integrated status LED and freewheeling diode, Push-in connection, 1 changeover contact, Polarity protection diode, Freewheeling diode, Input voltage: 24 V DC
PLC-RPT- 24DC/21-21/MS - 2910519
PLC-INTERFACE, consisting of a relay base and pluggable power contact relay with manual operation, integrated status LED and freewheeling diode, Push-in connection, 2 changeover contacts, Freewheeling diode, Input voltage: 24 V DC
PLC-RSC-230UC/21-21/MS - 2910506
PLC-INTERFACE, consisting of a relay base and pluggable power contact relay with manual operation, integrated status LED, Screw connection, 2 changeover contacts, Bridge rectifier, Input voltage: 230 V AC / 220 V DC
PLC-RSC-230UC/21/MS - 2909653
PLC-INTERFACE, consisting of PLC-BSC.../21 basic terminal block with screw connection and plug-in miniature relay with power contact and manual operation, 1 changeover contact, 230 V AC/220 V DC input voltage
PLC-RPT-110UC/21-21/RW - 2900348
PLC-INTERFACE for railway applications, consisting of basic terminal block with Push-in connection and plug-in miniature relay with power contact, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40°C to +70°C, 2 changeover contacts, input voltage 110 V DC
PLC-RPT- 48DC/21-21 - 2900333
PLC-INTERFACE, consisting of PLC-BPT.../21-21 basic terminal block with Push-in connection and plug-in miniature relay with power contact, for mounting on NS 35/7,5 DIN rail, 2 changeover contacts, input voltage 48 V DC
PLC-RPT- 24UC/21-21 - 2900332
PLC-INTERFACE, consisting of PLC-BPT.../21-21 basic terminal block with Push-in connection and plug-in miniature relay with power contact, for mounting on DIN rail NS 35/7,5, 2 changeover contacts, 24 V AC/DC input voltage
Switch
PLC-RPT- 24UC/ 1/S/H - 2900328
PLC-INTERFACE with switch (operation by hand) and integrated power contact relay for the "Manual, Zero and Automatic" functions, with push-in connection, for mounting on DIN rail NS 35/7.5, one N/O contact, input voltage 24 V AC/DC
PLC-RPT- 48DC/21 - 2900301
PLC-INTERFACE, consisting of PLC-BPT.../21 basic terminal block with Push-in connection and plug-in miniature relay with power contact, for mounting on DIN rail NS 35/7,5, 1 changeover contact, input voltage 48 V DC
PLC-RSC-230AC/21-21/SO46/HI - 1079387
PLC-INTERFACE consisting of PLC-BSC.../21-21/SO46/HI basic terminal block with screw connection and plug-in miniature relay with power contact, 2 changeover contacts, nominal input voltage of 230 V AC, with defined activation and deactivation thresholds
PLC-RSC-230UC/21HC - 2967675
PLC-INTERFACE, consisting of PLC-BSC.../21 HC basic terminal block with screw connection and plug-in miniature relay for high continuous current, for mounting on DIN rail NS 35/7,5, limiting continuous current up to 10 A, 1 changeover contact, input voltage 230 V AC/220 V DC
PLC-RSC-120UC/21HC - 2967662
PLC-INTERFACE, consisting of PLC-BSC.../21 HC basic terminal block with screw connection and plug-in miniature relay for high continuous current, for mounting on DIN rail NS 35/7,5, limiting continuous current up to 10 A, 1 changeover contact, input voltage 120 V AC/110 V DC
PLC-RSC- 24DC/ 1- 1/ACT - 2967109
PLC-INTERFACE for output functions, consisting of PLC-BSC.../ACT basic terminal block with screw connection and plug-in miniature relay with power contact, for mounting on DIN rail NS 35/7,5, 2 N/O contacts (1-1), input voltage 24 V DC
PLC-RSC- 60DC/21 - 2966139
PLC-INTERFACE, consisting of basic terminal block PLC-BSC.../21 with screw connection and plug-in miniature relay with power contact, for assembly on DIN rail NS 35/7,5, 1 changeover contact, input voltage 60 V DC
PLC-RPT- 24UC/2X21/FG - 2910539
PLC-INTERFACE, consisting of a relay base and plug-in safety relay with force-guided contacts in accordance with DIN EN 61810-3, Push-in connection, 2 changeover contacts, forcibly actuated, Bridge rectifier, Input voltage: 24 V AC/DC
PLC-RSC- 24UC/2X21/FG - 2910536
PLC-INTERFACE, consisting of a relay base and plug-in safety relay with force-guided contacts in accordance with DIN EN 61810-3, Screw connection, 2 changeover contacts, forcibly actuated, Bridge rectifier, Input voltage: 24 V AC/DC
PLC-RPT- 24UC/21HC/MS - 2910531
PLC-INTERFACE, consisting of a relay base and pluggable power contact relay with manual operation, integrated status LED, Push-in connection, 1 changeover contact, Bridge rectifier, Input voltage: 24 V AC/DC
PLC-RPT- 24UC/21-21/MS - 2910520
PLC-INTERFACE, consisting of a relay base and pluggable power contact relay with manual operation, integrated status LED, Push-in connection, 2 changeover contacts, Bridge rectifier, Input voltage: 24 V AC/DC
PLC-RPT- 24DC/ 1/MS/ACT - 2909677
PLC-INTERFACE for output functions, consisting of PLC-BPT.../ACT basic terminal block with Push-in connection and plug-in miniature relay with power contact and manual operation, 1 N/O contact, 24 V DC input voltage
PLC-RPT-120UC/21/MS - 2909669
PLC-INTERFACE, consisting of PLC-BPT.../21 basic terminal block with Push-in connection and plug-in miniature relay with power contact and manual operation, 1 changeover contact, 120 V AC/110 V DC input voltage
PLC-RPT-120UC/21/EX - 2909529
PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 6.2 mm with Push-in connection and plug-in miniature relay with 6 A power contact, 1 changeover contact, 120 V AC/110 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2.
PLC-RPT-24DC/21/EX - 2909528
PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 6.2 mm with Push-in connection and plug-in miniature relay with 6 A power contact, 1 changeover contact, 24 V DC input voltage. Approved in accordance with ATEX/IECEx (zone 2) and Ex zone Class I, Div. 2.
PLC-RSC-230UC/21/EX - 2909526
PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 6.2 mm with screw connection and plug-in miniature relay with 6 A power contact, 1 changeover contact, 230 V AC/220 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2.
PLC-RSC-120UC/21/EX - 2909525
PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 6.2 mm with screw connection and plug-in miniature relay with 6 A power contact, 1 changeover contact, 120 V AC/110 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2.
PLC-RSC-12DC/21/EX - 2909522
PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 6.2 mm with screw connection and plug-in miniature relay with 6 A power contact, 1 changeover contact, 12 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2.
PLC-RSC-230UC/21-21/EX - 2909512
PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 14 mm with screw connection and plug-in relay with power contact, 2 changeover contacts, 230 V AC/220 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2.
PLC-RSC-120UC/21-21/EX - 2909511
PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 14 mm with screw connection and plug-in relay with power contact, 2 changeover contacts, 120 V AC/110 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2.
PLC-RPT- 12DC/21-21 - 2900329
PLC-INTERFACE, consisting of PLC-BPT.../21-21 basic terminal block with Push-in connection and plug-in miniature relay with power contact, for mounting on DIN rail NS 35/7,5, 2 changeover contacts, input voltage 12 V DC
PLC-RPT-110UC/21HC/RW - 2900326
PLC-INTERFACE for railway applications and high continuous currents, consisting of basic terminal block with Push-in connection and plug-in miniature relay, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40°C to +70°C, 1 changeover contact, input voltage 110 V DC
PLC-RPT- 24UC/21HC/RW - 2900324
PLC-INTERFACE for railway applications and high continuous currents, consisting of basic terminal block with Push-in connection and plug-in miniature relay, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40°C to +70°C, 1 changeover contact, input voltage 24 V DC
PLC-RPT- 12DC/21 - 2900316
PLC-INTERFACE, consisting of PLC-BPT.../21 basic terminal block with Push-in connection and plug-in miniature relay with power contact, for mounting on DIN rail NS 35/7,5, 1 changeover contact, input voltage 12 V DC
PLC-RPT- 24DC/ 1IC/ACT - 2900298
PLC-INTERFACE for high switch-on currents, consisting of PLC-BPT.../1 IC/ACT basic terminal block with push-in connection and plug-in miniature relay, for mounting on DIN rail NS 35/7,5, max. switch-on current up to 130 A, 1 N/O contact, input voltage 24 V DC
PLC-RSC- 5DC/21 - 1119897
PLC-INTERFACE, consisting of PLC-BSC.../21 basic terminal block with screw connection and plug-in miniature relay with power contact, for mounting on NS 35/7,5 DIN rail, 1 changeover contact, 5 V DC input voltage
PLC-RPT- 5DC/21 - 1119893
PLC-INTERFACE, consisting of PLC-BPT.../21 basic terminal block with Push-in connection and plug-in miniature relay with power contact, for mounting on NS 35/7,5 DIN rail, 1 changeover contact, 5 V DC input voltage
PLC-RSC-230AC/21HC/SO46/HI - 1079402
PLC-INTERFACE consisting of PLC-BSC.../21HC/SO46/HI basic terminal block with screw connection and plug-in miniature relay for high continuous current, 1 changeover contact, nominal input voltage of 230 V AC, with defined activation and deactivation thresholds
PLC-RPT-230AC/21-21/SO46/HI - 1079389
PLC-INTERFACE consisting of PLC-BSC.../21-21/SO46/HI basic terminal block with Push-in connection and plug-in miniature relay with power contact, 2 changeover contacts, nominal input voltage of 230 V AC, with defined activation and deactivation thresholds
PLC-RPT- 24DC/ 1ICT/ACT - 1078683
PLC-INTERFACE for high inrush currents, consisting of PLC-BPT.../1 IC/ACT basic terminal block with push-in connection and pluggable miniature relay, for mounting on DIN rail NS 35/7,5, max. inrush current up to 800 A, 1 N/O contact, input voltage 24 V DC
Switch
PLC-RSC- 24UC/ 1/S/H - 2982236
PLC-INTERFACE with switch (operation by hand) for the “Manual, Zero, and Automatic” functions, with screw connection and integrated power contact relay, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input voltage 24 V AC/DC
PLC-RSC- 60DC/21HC - 2967659
PLC-INTERFACE, consisting of PLC-BSC.../21 HC basic terminal block with screw connection and plug-in miniature relay for high continuous current, for mounting on DIN rail NS 35/7,5, limiting continuous current up to 10 A, 1 changeover contact, input voltage 60 V DC
PLC-RSC- 48DC/21HC - 2967646
PLC-INTERFACE, consisting of PLC-BSC.../21 HC basic terminal block with screw connection and plug-in miniature relay for high continuous current, for mounting on DIN rail NS 35/7,5, limiting continuous current up to 10 A, 1 changeover contact, input voltage 48 V DC
PLC-RSC- 12DC/21HC - 2967617
PLC-INTERFACE, consisting of PLC-BSC.../21 HC basic terminal block with screw connection and plug-in miniature relay for high continuous current, for mounting on DIN rail NS 35/7,5, limiting continuous current up to 10 A, 1 changeover contact, input voltage 12 V DC
PLC-RSC-120UC/ 1/SEN - 2966249
PLC-INTERFACE for input functions, consisting of PLC-BSC.../SEN basic terminal block with screw connection and plug-in miniature relay with power contact, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input voltage 120 V AC/110 DC
PLC-RPT-230UC/21HC/MS - 2910534
PLC-INTERFACE, consisting of a relay base and pluggable power contact relay with manual operation, integrated status LED, Push-in connection, 1 changeover contact, Bridge rectifier, Input voltage: 230 V AC / 220 V DC
PLC-RPT-120UC/21HC/MS - 2910533
PLC-INTERFACE, consisting of a relay base and pluggable power contact relay with manual operation, integrated status LED, Push-in connection, 1 changeover contact, Bridge rectifier, Input voltage: 120 V AC / 110 V DC
PLC-RPT-230UC/21-21/MS - 2910523
PLC-INTERFACE, consisting of a relay base and pluggable power contact relay with manual operation, integrated status LED, Push-in connection, 2 changeover contacts, Bridge rectifier, Input voltage: 230 V AC / 220 V DC
PLC-RPT-120UC/21-21/MS - 2910522
PLC-INTERFACE, consisting of a relay base and pluggable power contact relay with manual operation, integrated status LED, Push-in connection, 2 changeover contacts, Bridge rectifier, Input voltage: 120 V AC / 110 V DC
PLC-RPT- 48DC/21-21/MS - 2910521
PLC-INTERFACE, consisting of a relay base and pluggable power contact relay with manual operation, integrated status LED and freewheeling diode, Push-in connection, 2 changeover contacts, Bridge rectifier, Input voltage: 48 V DC
PLC-RSC-230UC/21HC/MS - 2910518
PLC-INTERFACE, consisting of a relay base and pluggable power contact relay with manual operation, integrated status LED, Screw connection, 1 changeover contact, Bridge rectifier, Input voltage: 230 V AC / 220 V DC
PLC-RSC-120UC/21HC/MS - 2910517
PLC-INTERFACE, consisting of a relay base and pluggable power contact relay with manual operation, integrated status LED, Screw connection, 1 changeover contact, Bridge rectifier, Input voltage: 120 V AC / 110 V DC
PLC-RSC- 24UC/21HC/MS - 2910515
PLC-INTERFACE, consisting of a relay base and pluggable power contact relay with manual operation, integrated status LED, Screw connection, 1 changeover contact, Bridge rectifier, Input voltage: 24 V AC/DC
PLC-RSC- 24DC/21HC/MS - 2910514
PLC-INTERFACE, consisting of a relay base and pluggable power contact relay with manual operation, integrated status LED and freewheeling diode, Screw connection, 1 changeover contact, Polarity protection diode, Freewheeling diode, Input voltage: 24 V DC
PLC-RSC-120UC/21-21/MS - 2910505
PLC-INTERFACE, consisting of a relay base and pluggable power contact relay with manual operation, integrated status LED, Screw connection, 2 changeover contacts, Bridge rectifier, Input voltage: 120 V AC / 110 V DC
PLC-RSC- 48DC/21-21/MS - 2910504
PLC-INTERFACE, consisting of a relay base and pluggable power contact relay with manual operation, integrated status LED and freewheeling diode, Screw connection, 2 changeover contacts, Bridge rectifier, Input voltage: 48 V DC
PLC-RSC- 24UC/21-21/MS - 2910503
PLC-INTERFACE, consisting of a relay base and pluggable power contact relay with manual operation, integrated status LED, Screw connection, 2 changeover contacts, Bridge rectifier, Input voltage: 24 V AC/DC
PLC-RSC- 24DC/ 1/MS/ACT - 2909661
PLC-INTERFACE for output functions, consisting of PLC-BSC.../ACT basic terminal block with screw connection and plug-in miniature relay with power contact and manual operation, 1 N/O contact, 24 V DC input voltage
PLC-RSC-125DC/21/MS - 2909652
PLC-INTERFACE, consisting of PLC-BSC.../21 basic terminal block with screw connection and plug-in miniature relay with power contact and manual operation, 1 changeover contact, 125 V DC input voltage
PLC-RSC-120UC/21/MS - 2909651
PLC-INTERFACE, consisting of PLC-BSC.../21 basic terminal block with screw connection and plug-in miniature relay with power contact and manual operation, 1 changeover contact, 120 V AC/110 V DC input voltage
PLC-RSC- 12DC/21/MS - 2909648
PLC-INTERFACE, consisting of PLC-BSC.../21 basic terminal block with screw connection and plug-in miniature relay with power contact and manual operation, 1 changeover contact, 12 V DC input voltage
PLC-RPT-230UC/21HC/EX - 2909534
PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 14 mm with Push-in connection and plug-in relay with 10 A power contact, 1 changeover contact, 230 V AC/220 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2.
PLC-RPT-120UC/21HC/EX - 2909533
PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 14 mm with Push-in connection and plug-in relay with 10 A power contact, 1 changeover contact, 120 V AC/110 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2.
PLC-RPT-24DC/21HC/EX - 2909532
PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 14 mm with Push-in connection and plug-in relay with 10 A power contact, 1 changeover contact, 24 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2.
PLC-RPT-230UC/21/EX - 2909530
PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 6.2 mm with Push-in connection and plug-in miniature relay with 6 A power contact, 1 changeover contact, 230 V AC/220 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2.
PLC-RPT-12DC/21/EX - 2909527
PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 6.2 mm with Push-in connection and plug-in miniature relay with 6 A power contact, 1 changeover contact, 12 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2.
PLC-RSC-230UC/21HC/EX - 2909521
PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 14 mm with screw connection and plug-in relay with 10 A power contact, 1 changeover contact, 230 V AC/220 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2.
PLC-RSC-120UC/21HC/EX - 2909520
PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 14 mm with screw connection and plug-in relay with 10 A power contact, 1 changeover contact, 120 V AC/110 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2.
PLC-RSC-24DC/21HC/EX - 2909519
PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 14 mm with screw connection and plug-in relay with 10 A power contact, 1 changeover contact, 24 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2.
PLC-RSC-12DC/21HC/EX - 2909518
PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 14 mm with screw connection and plug-in relay with 10 A power contact, 1 changeover contact, 12 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2.
PLC-RSC-12DC/21-21/EX - 2909517
PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 14 mm with screw connection and plug-in relay with power contact, 2 changeover contacts, 12 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2.
PLC-RPT-230UC/21-21/EX - 2909516
PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 14 mm with Push-in connection and plug-in relay with power contact, 2 changeover contacts, 230 V AC/220 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2.
PLC-RPT-120UC/21-21/EX - 2909515
PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 14 mm with Push-in connection and plug-in relay with power contact, 2 changeover contacts, 120 V AC/110 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2.
PLC-RPT- 24DC/21-21/EX - 2909514
PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 14 mm with Push-in connection and plug-in relay with power contact, 2 changeover contacts, 24 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2.
PLC-RPT-12DC/21-21/EX - 2909513
PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 14 mm with Push-in connection and plug-in relay with power contact, 2 changeover contacts, 12 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2.
PLC-RPT- 72UC/21-21/RW - 2900347
PLC-INTERFACE for railway applications, consisting of basic terminal block with Push-in connection and plug-in miniature relay with power contact, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40°C to +70°C, 2 changeover contacts, input voltage 72 V DC
PLC-RPT- 60DC/21-21 - 2900334
PLC-INTERFACE, consisting of PLC-BPT.../21-21 basic terminal block with Push-in connection and plug-in miniature relay with power contact, for mounting on DIN rail NS 35/7,5, 2 changeover contacts, input voltage 60 V DC
PLC-RPT- 72UC/21/RW - 2900319
PLC-INTERFACE for railway applications, consisting of basic terminal block with Push-in connection and plug-in miniature relay with power contact, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40°C to +70°C, 1 changeover contact, input voltage 72 V DC
PLC-RPT- 60DC/21 - 2900303
PLC-INTERFACE, consisting of PLC-BPT.../21 basic terminal block with Push-in connection and plug-in miniature relay with power contact, for mounting on DIN rail NS 35/7,5, 1 changeover contact, input voltage 60 V DC
PLC-RPT-230UC/21HC - 2900297
PLC-INTERFACE for high continuous currents, consisting of PLC-BPT.../21 HC basic terminal block with Push-in connection and plug-in miniature relay, for mounting on DIN rail NS 35/7,5, limiting continuous current up to 10 A, 1 changeover contact, input voltage 230 V AC/DC
PLC-RPT-120UC/21HC - 2900296
PLC-INTERFACE for high continuous currents, consisting of PLC-BPT.../21 HC basic terminal block with Push-in connection and plug-in miniature relay, for mounting on DIN rail NS 35/7,5, limiting continuous current up to 10 A, 1 changeover contact, input voltage 120 V AC/DC
PLC-RPT- 60DC/21HC - 2900295
PLC-INTERFACE for high continuous currents, consisting of PLC-BPT.../21 HC basic terminal block with Push-in connection and plug-in miniature relay, for mounting on DIN rail NS 35/7,5, limiting continuous current up to 10 A, 1 changeover contact, input voltage 60 V DC
PLC-RPT- 48DC/21HC - 2900294
PLC-INTERFACE for high continuous currents, consisting of PLC-BPT.../21 HC basic terminal block with Push-in connection and plug-in miniature relay, for mounting on DIN rail NS 35/7,5, limiting continuous current up to 10 A, 1 changeover contact, input voltage 48 V DC
PLC-RPT- 24UC/21HC - 2900293
PLC-INTERFACE for high continuous currents, consisting of PLC-BPT.../21 HC basic terminal block with Push-in connection and plug-in miniature relay, for mounting on DIN rail NS 35/7,5, limiting continuous current up to 10 A, 1 changeover contact, input voltage 24 V AC/DC
PLC-RPT- 12DC/21HC - 2900290
PLC-INTERFACE for high continuous currents, consisting of PLC-BPT.../21 HC basic terminal block with Push-in connection and plug-in miniature relay, for mounting on DIN rail NS 35/7,5, limiting continuous current up to 10 A, 1 changeover contact, input voltage 12 V DC
PLC-RPT-120UC/21/SO46 - 1125988
PLC-INTERFACE for protection against interference currents/voltages on the control side. Consisting of PLC-BPT-120UC/21/SO46 basic terminal block with Push-in connection and plug-in miniature relay with power contact up to 6 A, 1 changeover contact, 120 V AC input voltage
PLC-RSC-120UC/21-21/SO46 - 1125985
PLC-INTERFACE for protection against interference currents/voltages on the control side. Consisting of PLC-BSC-120UC/21-21/SO46 basic terminal block with screw connection and plug-in miniature relay with power contact up to 2x 8 A, 2 changeover contacts, 120 V AC input voltage
PLC-RPT-230AC/21HC/SO46/HI - 1079404
PLC-INTERFACE consisting of PLC-BSC.../21HC/SO46/HI basic terminal block with Push-in connection and pluggable miniature relay for high continuous current, 1 changeover contact, nominal input voltage of 230 V AC with defined activation and deactivation thresholds
PLC-RPT- 12DC/ 1IC/ACT - 1078801
PLC-INTERFACE for high switch-on currents, consisting of PLC-BPT.../1 IC/ACT basic terminal block with push-in connection and plug-in miniature relay, for mounting on DIN rail NS 35/7,5, max. switch-on current up to 130 A, 1 N/O contact, input voltage 12 V DC
PLC-RSC- 12DC/ 1IC/ACT - 1078800
PLC-INTERFACE for high switch-on currents, consisting of PLC-BSC.../1 IC/ACT basic terminal block with push-in connection and plug-in miniature relay, for mounting on DIN rail NS 35/7,5, max. switch-on current up to 130 A, 1 N/O contact, input voltage 12 V DC
PLC-RPT- 48DC/21HC/MS - 2910532
PLC-INTERFACE, consisting of a relay base and pluggable power contact relay with manual operation, integrated status LED and freewheeling diode, Push-in connection, 1 changeover contact, Bridge rectifier, Input voltage: 48 V DC
PLC-RSC- 48DC/21HC/MS - 2910516
PLC-INTERFACE, consisting of a relay base and pluggable power contact relay with manual operation, integrated status LED and freewheeling diode, Screw connection, 1 changeover contact, Bridge rectifier, Input voltage: 48 V DC
PLC-RPT-12DC/21HC/EX - 2909531
PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 14 mm with Push-in connection and plug-in relay with 10 A power contact, 1 changeover contact, 12 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2.
PLC-RSC-230UC/21/SO46 - 2980490
PLC-INTERFACE with protection against interference currents/voltages on the control side, consisting of PLC-BSC.../21 basic terminal block with screw connection and plug-in miniature relay with power contact, 1 changeover contact, input voltage 230 V AC
PLC-RSC-230UC/ 1/SEN - 2966252
PLC-INTERFACE for input functions, consisting of PLC-BSC.../SEN basic terminal block with screw connection and plug-in miniature relay with multi-layer gold contact, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input voltage 230 V AC/220 V DC
PLC-RSC-230UC/21-21/SO46 - 2980500
PLC-INTERFACE with protection against interference currents/voltages on the control side, consisting of PLC-BSC.../21 basic terminal block with screw connection and plug-in miniature relay with power contact, 2 changeover contacts, input voltage 230 V AC
dienelectrics@gmail.com
0909186879 
1,687
Rơ le Phoenix Contact PLC-RSC- 24DC/ 1IC/ACT - 2967604 | 250VAC/DC 6A 24VDC NOGiá tốt nhất xem...0909186879 Email
Pilz PNOZ s60 100-240VACDC 3n/o 1n/c 6so | 750601 | Rơ le giám sát điện áp PL eGiá tốt nhất xem...0909186879 Email
Phoenix Contact PLC-OSC- 24DC/ 24DC/ 2 - 2966634 | Solid-state relay module -Giá tốt nhất xem...0909186879 Email
Phoenix Contact PSR-SCP- 24DC/ESD/4X1/30 - 2981800 | Safety relays -Rờ le anGiá tốt nhất xem...0909186879 Email
Relay module rơle PLC-RSC 2PDT 24vDC 5V 6A - Phoenix Contact - Relay Module -Giá tốt nhất xem...0909186879 Email
Rơ le Relay bán dẫn SSR Phoenix Contact DEK-OE- 5DC/ 24DC/100KHZ - 2964270 | 5VDC 24VDC 5mA 100kHzGiá tốt nhất Xem...0909186879 Email
Rơle Phoenix Contact PLC-RSC-24DC/21 - 2966171 | Mỏng 1CO 250VAC/DC 6A 24VDCGiá tốt nhất Xem...0909186879 Email
Relay kiếng 24V, 2 cặp tiếp điểm, 10A - Phoenix Contact - Single relay - REL-IR2/LDP- 24DC/2X21Giá tốt nhất Xem...0909186879 Email-Phoenix-Contact-Single-relay-REL-IR2-L-230AC-2X21-order-code-2903668-DienElectric.jpg)
Relay kiếng 220VAC, 4 cặp tiếp điểm, 6A (test button) - Phoenix Contact - Single relay - REL-IR2/L-230AC/2X21Giá tốt nhất Xem...0909186879 Email
Relay module rơle PLC-RSC 1PDT 24vDC 5V 6A - Phoenix Contact - Relay Module - PLC-RSC- 24DC/21 - 2966171Giá tốt nhất Xem...0909186879 Email
Rơ le bảo vệ chênh lệch dòng Line Current Differential Relay - SEL - SEL-311LGiá tốt nhất Xem...0909186879 Email
Role Relay kiếng trung gian 2 PDT 220vDC 12A - Phoenix Contact - Single relay - REL-IR2/LDP-220DC/2X21 - 2903665Giá tốt nhất Xem...0909186879 Email-Phoenix-Contact-Single-relay-REL-IR2-L-230AC-2X21-code-2903668-DienElectric.jpg)
Relay kiếng 220VAC, 2 cặp tiếp điểm, 10A (test button) - Phoenix Contact - Single relay - REL-IR2/L-230AC/2X21Giá tốt nhất Xem...0909186879 Email
